How do i record voice through both speakers?

I am having an issue recording vocals on garage band. Each time i record vocals, they only play through one speaker instead of both. Anyone know what im doing wrong?

http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
(Let the page FULLY load. The link to your answer is at the top of your screen)

Similar Messages

  • Pavillion 15 n097sa laptop. L and R audio coming through both speakers at same time.

       Hi, so basically, i have just upgraded to this 15 n097sa laptop (new to me) from my old aspire, and it is sooo much better.
        Only, I have just noticed that when either left or right sound is coming out of both speakers at once. i noticed it whils wearing headphones. the left definitely comes out of the left slightly more, and the right as well respectively, but they still come out of both speakers quite a lot.
         To make that clearer, the left only channel is coming through both speakers at once, instead of just the left speaker. And the same for the right channel.
       i have only done a real test on youtube stereo test videos, the same i tested on my old acer before, which came out of correct speakers.
    i have a dts sound, whatever that is, and it could be down to simply changing the settings, but i don't think that's it.
        Does anyone else have or have had this issue too?
    I know i am a pc simpleton, but please go steady on me, ta.
    win 8.1 pro  .
    please, and thank you very much indeed, Sofa.
    This question was solved.
    View Solution.

    Hi there @SofaQueue 
    Welcome to the HP Support Forums! It is a great place to find the help you need, both from other users, HP experts and other support personnel.
    I understand that you are having trouble with the audio balance on your notebook computer, and I am happy to help with this. First I would suggest reinstalling the audio driver.
    Try this link which will automatically start the download of the driver to your notebook. You will then have to run the file to install it. Realtek High-Definition (HD) Audio Driver
    If you are still having trouble, check through this page; there may be something within that could be useful.
    No Sound from the Speakers (Windows 8)
    Also you can look at these pages - from Microsoft's support website:
    Poor sound quality after upgrading to windows 8.1
    Automatically diagnose and fix Windows audio playback problems
    Let me know if you are still having any problems, and post the details of what is happening.
    Malygris1
    I work on behalf of HP
    Please click Accept as Solution if you feel my post solved your issue, it will help others find the solution.
    Click Kudos Thumbs Up on the right to say “Thanks” for helping!

  • How can I record voice from external microphone and music on ipad

    I am a hypnotherapist and I want to record my sessions.  I would like my clients to wear headphones and hear both my background music (playing on my ipad) and my voice THROUGH the headphones as I speak into an external microphone.  I thought that I could play the music and plug in a snowball mic and have both music and voice record, as well as have my voice come through the headphones (so that the client is hearing voice and music directly into their ears).  I am using the ap Voice Recorder.
    Here are the two problems:  Using the external mic, I can record my voice, but the music does not record.  Also, when I speak into the microphone, it Voice Record records my voice but you can't hear it through the headphones (although you can hear the music).  Please help!!!

    Thanks.  I'll take a look.  Maybe I can use a powered USB hub.  Someone else mentioned this on another forum so that she could record karaoke and hear her voice and the music at the same time.  I think if I plugged the both a usb microphone and a headset into the hub, maybe...just maybe?  I can hear the music through regular earbuds.  I dunno.  Worth a try, though.  What do you think?

  • How to listen to itunes through external speakers

    I have Intempo IDS ipod speakers and want to know how to plug them into my laptop so i can listen to my itunes playlist through the speakers... I have read that there should be a box in the bottom right of the screen to select speakers but I do not have this and I do have the look for speakers box ticked in my preferences.
    Any suggestions? what needs to be plugged in where?
    any help would be much appreciated
    Ela.

    I have read that there should be a box in the bottom right of the screen to select speakers but I do not have this and I do have the look for speakers box ticked in my preferences.
    That is only for speakers connect to an Airport Express wireless system. There is no setting in iTunes to play through speakers connected to your computer. All you should have to do is plug them into your laptop's audio/headphone output.

  • Recording sound through the speakers of a Satellite L750D

    Hi,
    I am trying to set up my Satellite L750D (psk36a-038008) so I can record using the sound that gets sent to the speakers and not just the input from the microphone. (whatever comes through the speakers could be recorded by whatever sound recording software I use). I was able to do this on a previous laptop (not Toshiba) but this one doesn't want to do it.
    In the recording tab of the microphone, I have got the 'Show Disabled Devices' option ticked/checked but nothing else is showing apart from the conexant microphone.
    The laptop is less than 1 month old, does it need new drivers already?
    Thanks

    And what is the source for this sound?
    Do you want to record music from internet radio or what?
    As far as I know Toshiba has build-in microphone and it is designed to be used with communications applications like Skype, MSN or something similar. As far as I know when mic is ON speakers are OFF.
    It works on this way to avoid microphony effect.
    To be honest it is not known to me that you can force notebook to work on this way and record sound that comes from speakers.

  • How do I record voice on Final Cut Pro

    Hi everyone. I have a question. How do I record audio from a microphone plugged to my mac on the FCP. And in case I decide to use Soundtrack which settings do I have to put to then pass this audio to a FCP project done with Apple Pro Res 422.
    Thanks
    Eugenia

    EugeniaMac:
    For high quality production work, and with a professional mike in hand I think that it would be better to preamp the mike and use the “line-in” function rather than use a cheap USB mike.
    FYI: www.zzounds.com/item--ART127 - $48;
    http://pro-audio.musiciansfriend.com/product/Nady-DMP2-Dual-Mic-PreAmp-?sku=1801 56 - $69.99;
    http://www.americanmusical.com/Item--i-MII-ABO-LIST - $59;
    http://www.zzounds.com/item--BEHMIC100 - $29.95.
    Whatever, good luck.
    Ken

  • How to add record voice over for a video file

    I have a video file (wmv) already prepared, and all I would like to now do is record a voice over for this file using Soundbooth CS4.  My hunch is that I need to import the video into a multi-track file, and then I expect I'll export the multitrack file back to the WMV when I'm done.  The problem is that when I hit the record button, I'm expecting to see the video playing but I don't.
    Is there a way to add a voice-over / narration to an exisiting video file (in this case a video file without an audio track at all)

    When you are recording, you are creating a new audio track and not playing the video, so you won't see it advance.
    Best bet is to open the video in WMP, and record your audio in SB while it plays, to get the timing right, then open the video in SB and past the recording into it.
    I'm not sure, but I believe the reason you can't play the vid and record at the same time is in case someone is recording new audio for a clip that has audio in it already, the old audio would play at the same time the recording is taking place and would screw it all up, so it either records one or plays the other, but not both at once.

  • How do I output Audio through computer speakers while outputting video via Firewire to TV

    I'm outputting the video and audio streams via a FireWire connected Camcorder to a TV display (used as a third display), but I want the audio to output through the computer speakers and not through the Camcorder speakers as is happening.  If I disconnect the Camcorder, the audio outputs through the computer speakers normally.  This must be an audio out setting issue but I can't remember which settings to adjust.  I used to do this in an earlier version of PRE but I've forgotten the settings.  I'm using PRE 9.0.  If someone can understand what I'm trying to say, I hope that person can help me.  Thanks.

    Good thought.  I was thinking the same way, and I tried  adjusting every
    setting that's there but without any luck. It must be  a setting within PRE
    that would allow the video output stream to be split from  the audio output
    stream but I just can't find the setting.  As I mentioned  in the posting, I
    used to do this in an earlier version of PRE.
    M Martineau
    In a message dated 6/3/2011 5:02:55 P.M. Pacific Daylight Time, 
    [email protected] writes:
    Interesting question.
    Not sure that the answer will be  there, but I would go to Edit
    Preferences>Audio Hardware, and look very  closely at the settings there.
    Good luck, and hope that it's just  the matter of a  setting?
    Hunt

  • When I connect my iphone directly to my receiver then connect to spotify, it plays through both speakers but when I connect wirelessly through airport express it only comes out through one speaker. Any thoughts?

    When I connect my iphone directly to the receiver through a cable, it plays Spotify just fine but when I try to play wirelessly through Airport Express, it only plays through one speaker. Any thoughts?

    yeah, that's what I figured.. I guess I'll try now to figure out exactly how to do that!

  • How do you record voice audio?

    Hi, I have been unable to record any voice audio at all. I have tried several types of microphones, and went directly into garage band, but no audio has been recording at all. The speaker part of the audio is working just fine.
    I am wondering if perhaps garage band is not set up properly, or if there is a problem with the sound card or driver? However, since the audio out is working fine, it seems that there may be some other issue somewhere.
    Any help or suggestions would be much appreciated!

    Hi-
    I was wondering if it was a driver or a sound card issue?
    It is neither.
    Unless you have a special microphone with a built-in preamp (self powered), like DaddyPaycheck said, standard microphones run at line level, and won't work with out a preamp.
    http://support.apple.com/kb/HT2839
    Alternatively, check out the iMic:
    http://www.griffintechnology.com/products/imic

  • Brand new GB user: How do I record voice-only for posting only?

    New owner of an iMac intel OS 10.6.8, brand new user of GarageBand, awaiting graduation from the Berkeley School of Music (heh, not really) but
    wishing to know if I can use the same audio input system (mic) already well used with Dragon Dictate voice reocognition system for the purpose of producing a "podcast" (audiobook) I can post in my online blog.
    The music portion will come in time as I have a good virtual friend in Arkansas who is a solid rock bass guitarist and blues man and I am a huge fan of music (especially jazz) and especially Keith Jarrett and very especially Gary Peacock. We will in good time record and compose our own music, he more live. He is way more advanced, but I just bought us two books -- one on music notation and the other Marsalis "Moving to Higher Ground". 
    I have in mind a jazz suite based on Gustavo Santoalalla's soundtrack for "Motorcycle Diaries". [It's an open source idea.]
    Thanking you in advance...
    I am,
    Mssr. Jouet

    Thanks, tt2. Yes, the brevity is a no-go for the application I have in mind. I could go straight to a podcast provider (at significant cost). But the iTalk recorder... does it record to an mp3 or something similar which I can then affix to a web page? I have one blog up and running, and another in the works (different hosting software in each case, one requiring a host (WordPress), the other doesn't (Blogger)). I can dictate to text directly with DragonSpeaking, but the idea of having a downloadable podcast of content for educational purposes is what I am after. Perhaps neither is the solution, and I will simply have to pull out the credit card and pay significant annual fees.
    Give my best to London.

  • How do I record voice and hear software instrument track track

    I have created a track with my Roland XP as a software instrument.  Now I want to create a track while singing.  I chose audio track, pluged in my microphone, set the metronome, pushed record...... but can't hear the instrument track or metronome so I can sing with that track.  What am I doing wrong?

    tomgribby wrote:
     I have recorded my voice as a live instrument track on my Samson C01U microphone & selected Stereo when i recorded. The vocals are panned to the left
    http://www.bulletsandbones.com/GB/GBFAQ.html#leftspeakeronly
    (Let the page FULLY load. The link to your answer is at the top of your screen)

  • Hearing voices through the speakers and headphones

    Hello everyone,
    I don't know how but recently i've been hearing a strange muffled voice over my headset.
    It sounds like a really nice person but i really am a bit anxious about it.
    For all i know it's the secret service, but it can also just be airplane communications or police radio.
    If you want to know i have a 15 inch macbook pro with retina display from early 2013 with OS X 10.9.3 installed, intel core i7 and nvidia GT 650M.
    Does anybody have a clue what this might be, and is this a known problem?
    Thanks.

    quit all software one by one to isolate the offending software.

  • Record voice over in 10.2.

    How do I record voice over in iMovie 10.0.5? I cannot find the microphone icon!

    Do you have an iPhone? IF so, use the Voice Memo app which comes default with all iPhones and record the narration. Tip: make multiple attempts as you'll need the find the balance of speaking tone/volume compared to how close you speak to your iPhone. Also, be sure to record your narration when there is no other background noise.
    Then sync your iPhone to your iTunes; your voice memo clip should be stored in Voice Memo playlist within iTunes. Once the voice memo clip is in iTunes, go and import the voice audio narration clip into your iMovie project....presto.

  • HT2508 How can I record my voice through my Mac?

    How can I record my voice to my Mac?

    Use GarageBand.
    In GarageBand, go to the Track menu and add a New Track to your project. When the box comes up, click "real instrument", then "create". Unless you have external audio hardware connected, the default audio input for the track should be the internal microphone of the computer.
    Or use QuickTime. Open QuickTime, go to File>New Audio Recording.

Maybe you are looking for