How do I record what I can hear?

I use Cowmon Media to record what I can hear on my Dell Inspiron laptop. Purchased a Toshiba Sattelite and tried to do the same thing. It will not work. All I see for recording devices is my microphone. How do I set up my TS to record what I can hear?

There are many ways to record drums depending on what the final goal is and more important budget. You can start with one or two carefully placed mics to a mic on every drum and many will even add in some midi triggers.
If you have a Apogee One you could just use the built in mic and try experimenting with placement.
And you are going to want a set of headphones to monitor the playback not a speaker. A set of speakers and a open mic will feedback.

Similar Messages

"recording what i can hear" in logic ??

Hi, i want to record what my computer is playing for sampling purposes. I can do this type of thing in sony acid it gives you a "record what you can hear" option but im quite new to logic 8 so im not sure if i can do that?!?!?
Thanks in advance guys
D

So I've read most of the getting started thing and it tells you all kinds of things about editing songs etc...but it doesn't seem to say anything about not being able to monitor the sounds yo are recording. Example when I click the record button and have a track record enables it shows the information being drawn on the arrange region area but I can't hear the notes I am writing with the keyboard while i am recording nor playing it back...but..I can hear the click track which tells me the monitors are recognizing the data sent from logic to the interface..so the underlining problem is basically how can I get the sound that is being written through my monitors? Did I assign something wrong in the start up assistant or what?

X-Fi "What you can hear" doesn't wor

Hi,
I installed the latest driver for the X-Fi on
Windows Vista Ultimate x64.
I want to use the "What you can hear" option, but this doesn't work!!!
When I go under the Sounds Option of Windows Vista, I can check "What you can hear" as the default device, but it says "Not available". Only the mic device under Recording is "In use", so it works, but not that "What can you hear".
What can I do? I get crazy by trying to get this work. I bought this X-Fi Card, because my old 5. Li've doesn't any new drivers for Vista, and this X-Fi isn't working as well as it is supposed.
Is this currently not supported? Will there be an driver update soon that fix this issue?Message Edited by Rocko on 05-23-20072: PM

Thanks for your answer.
I already tried that, and it didn't work.
Now I got the answer:
As long as one device is in use, you can't switch between microphone and "what you hear" and else...
As Long as one program uses the microphone, as example. A hint for other users..

Want to record what I'm hearing on Aux 4 when soloed

Hi, I've an effect on bus 4, that I want to record to an audio track...
I want to record what I'm hearing exactly/only when I solo bus 4
this bus has a flange effect 100% wet and is a really exaggerated flange effect...and loud too
Currently, I can only figure to put input of audiotrack as bus 4 but this for some stupid reason is not working....
all thats getting is what I'm SENDING to bus 4, a basic Closed Hat.
Now I've been talking to a guy who seems to say my problem must be my send control is to little BUT
even when I turn this full, the signal picked up/recorded to the audio track with bus 4 as input is STILL
just the originasl hat sound- no flange.
A solution to this would save me going mad here today!
p.s can't bounce unfortunetly because I dont want to dither twice at 24 bits, which also the finished track will be later
..which is a totall different topic I don't wasnt to get into
thanks

What you want to record is not bus 4, but the Aux channel that is receiving the signal from bus 4. Set the output of the Aux to a different bus, then use that as the input to the audio track.

Received message that my start up disk is almost full. Where is this located and how do I know what I can delete?

Received a message that my start up disk is almost full. Where do I locate my start up disk / files and how do I know what i can delete from this folder to make more space?

Start up disk is the main, and only, internal disk of your computer.
I hope you know what you saved on it, so you also know what can be removed

How can i record what my speakers hear?

Hi guys just wondering if you can help, at college not long ago we had adobe audition on the Windows pc's and you could record what the speakers were playing is there a way of doing that in logic, just i have a project to do and i want to record some sound off a DVD just so i can use i have looked for sounds to buy on the net but none are like this one is it possible?

This is the easiest, nicest solution:
http://www.rogueamoeba.com/audiohijackpro/

HT4623 After installing iOS 7 my microphone isn't working. No recording , no one can hear me on Skype

After installing ios7 my microphone isn't working. No one can hear me on Skype. Recording device arnt working too. I rebooted the device as well downloaded Skype again. Please help me

A restore will not work either. I went to the Apple genius bar and they did everything, but nothing worked. "It is your hardware". No, it is not. It is Apple's IOS 7 software that was not properly coded/tested before they released it. Now they will not own up to the problem. There are too many people with the same issue that suddenly happened after the IOS 7 install. Come on, Apple. Fix this! These are expensive devices and many of us will not buy another iPad if we run a risk like this.

No sound while recording but I can hear during playback

I plugged my iRig HD in my macbook air (Yosemite), opened garage band and configure input output settings. While I was recording couldn't hear any sound but during playback I could hear clearly everything. I haven't got any problem on Amplitube 3. Is there any different settings on garage band?

What if I want to use mac's speakers or an external speaker
As long, as are not recording using the internal microphone it should work to change the output in the GarageBand Preferences > Audio to System Settings and to set the System Preferences > Audio > Output to the internal speakers or the internal output , if you have speakers plugged in instead of your headset.

Mic records, but I can't hear sound. (Logitech C920).

Hello there, new to the apple support community here but I have a question that I finally can't figure out myself.
I wanted to play around with twitchtv so I purchased a C920 earlier and (not sure how to put this) I can't figure out why the built-in mic is not sending my voice so that I may hear it through headphones or over my stream. I tried configuring various settings I found while researching this problem and still no luck on getting my voice streamed. However, when I go into system preferences in the output area my mic is being heard and in garageband my mic is being recorded. I can hear my voice when use playback in garageband, but that is the only time I can hear my mic.
Currently I am running the latest Mavericks OSX I'm not sure what other information may be needed from my end, but if anyone is able to help I greatly appreciate it.
Edit: I figured out the problem shortly after I posted this... I apologize. It was my Wirecast software, it was not properly sending my voice to twitchtv. I used Flash Media Live Encoder instead and it worked like a charm.

I believe I have the same problem. I've got an 8130 running OS 4.5.0.138, and I've tried two different headsets, both of which worked when tested on two other phones. I've wiped my 8130 and reloaded the OS, but still no audio. I can hear the control beeps from the headset: call received, call rejected, connection completed, etc.; and I can use the button on the headset to accept/reject calls, end calls, redial, and start voice dialing. I just can't hear the call.
I'm at my wit's end and any help would be much appreciated.

Re: Creative and VISTA - Works on Record WHAT You HEAR AT LAST - Follow These Steps!!!!

I have "Sorted" Out My Creative to work (NOT RECORDING WHAT YOU / I HEAR) with VISTA?I use Musicmatch to Play and or Real Audio to Listen / Stream?from the Net (You may use ANY Player for the same) and then Press the Record on My COOL EDIT Pro and WHALA There I Have Music that has been Recorded - What a Relief!!!!!!!:smileyvery-happy:?Get / Download COOL EDIT PRO and do ONLY the Following Settings:?Set the Settings in the Options - Settings - Multitrack - Click / Tag in "Open Order" on "Rec Play" and Click/Tag in "Start Order" on "Play/Rec." and Click/Tag in Default Rec on "Stereo" and Away You Go?Enjoy Your Creative Sound Card and Recording / Streaming Yet AGAIN?Best Wishes?Andre (from South Africa - East Coast - Port Elizabeth - The Friendly City)

I do not have 'what you hear' as an option any longer with the new Titanium; I had it with my older X-Fi Fatalty, but not this new card.
I would imagine it has something to do with Microsoft trying to limit recording of DRM-protected content, and Creative bowing to their wishes.

What CPU can I upgrade to?

Hi all I'm new to all this but all I want to know is what is the largest CPU my PresarioC500 can be upgraded to? Or can someone give me a clue on how to find out what it can be upgraded to. Thanks Heaps.
Steve
This question was solved.
View Solution.

Hi, I have a HP Pavilion tx2500 Notebook PC with AMD Turion X2 Ultra ZM-80 processor and a updated 6.0 RAM. I read on the manual: http://h10032.www1.hp.com/ctg/Manual/c03182899.pdf (on page 70) about all the types of processors that I can use.
Since then, the ZM - 87 and ZM - 88 came out. So can I upgrade to 87 or 88?
Also, am I limited to only AMD Turion processors? Can I upgrade to the new AMD Phenom™ II Processors ?
Can I also change from duel-core to quad? or even X6?
Lastly can i upgrade from 32-bit and 64-bit Window?
Overall, I just want to upgrade to the highest cpu processor as possible.

How do I turn audio monitoring ON so I can hear while I record?

I'm a musician trying to record live video of a song in imovie '09.
How do I turn the audio monitoring ON so that I can hear what I'm playing while I play it?
In other words: I can only hear what I recorded on the mic when I play the video back. *I want to know how to hear (through the speakers) what I am recording while I am recording it.
I sincerely appreciate any help

If you do that you will get feedback.

When making an outgoing call from my i phone, an icon of a microphone with a slash acroos it appears. I can hear the receiving party speak, but he cannot hear me. What has been shut off and how do I turn it on?

When making an outgoing call from my i phone, an icon of a microphone with a slash across appears. I can hear the recipient speakin but he cannot hear me. What has been turnedd off, and how do I turn it on?

I think mute is on, tap the microphone icon with the slash running through it

My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

My iphone 5 ATT, i can hear the recording, but can not hear anything from neither ear speaker or loud speaker when i call? what is the problem? what can i do, it is out of warranty.

1357b wrote:
My iphone 5 ATT, i can hear the recording
What recording?
but can not hear anything from neither ear speaker or loud speaker when i call?
You just wrote you could hear the recording...
You can take it into an Apple store and have it checked out.

I'm having trouble recording a bass to go along with a recording I dropped into GB. I'm using an interface and I can hear the bass line, I've clicked on the 'record' button, but the sound does not record. What am I missing?

I have the bass connected to my imac with an interface.
I can hear the bass and I've clicked on the 'record' button, but the sound does not record.
Am I missing something ?
Please advise.
Mike

Double check all your audio settings.
System Preferences --> Sound --> Input should be set to your audio interface.
GB --> Preferences --> Audio/MIDI --> Input should be set to your audio interface.
With your track selected, open the Track Info pane, and select the Edit tab. Under input make sure that Mono 1 or 2 is selected (which number will depend on which input you plugged your bass cable into).

How do I record what I can hear?

Similar Messages

Maybe you are looking for