How do I recover iMessage transcripts after reinstalling?

So, I reinstalled Mountain Lion, but when I set up iMessage, my chats were gone. Signing in and sending a message was not enough to get the old messages. I have them on my iPhone, but not on my Mac. They don't seem to be in the usual spot on the hard drive either. It'd mean a lot to be able to get them on my laptop. They weren't at the Library/Messages/Archives in the laptop or the time machine backup.

You can only restore the whole message database, not individual messages or conversations. This procedure will replace the database with an earlier version, so you'll lose all later changes.
Hold down the option key and select
Go ▹ Library
from the Finder menu bar. A folder window will open. Restore the subfolder named "Messages" from a backup that predates the unwanted changes, then log out and log back in.
If you don't have a backup, the archive can't be restored.

Similar Messages

  • How can i recover my voicemails after updating my iPhone?

    How can i recover my voicemails after updating my iPhone?

    When one restores an iPhone from its own backup, visual voicemail is also restored. However, when one restores a new iPhone from a backup from a previous phone, the voicemails fail to restore. This occurred between my 3G to 4s, and again from the 4s to a 5s. Restoring the 4s once from its own backup resulted in voicemail recovery.
    My only explanation is that when a different SIM card is used, voicemails cannot restore as one would otherwise expect. Perhaps voicemails are inexplicably tied to their SIMs. Unfortunately, newer models of iPhones tend to use exceedingly different sizes, rendering one possible fix unpursuable. iBackupBot is the other possible solution: you can extract the voicemails from the backup and restore them onto the new iPhone individually.

  • How can i redownload snow leopard after reinstalling an old version of leopard from disks

    Hi;
    how can i redownload snow leopard after reinstalling an old version of leopard from disks
    I have a mobileme account and an icloud account
    Marcia

    If you have Leopard installed, you can't download anything to get to Snow Leopard.
    In order to do that you must have a Snow Leopard DVD.
    Allan

  • Library recovery: how can I recover a library after I get this message: There was an error opening the database for the library "/Users/Jim/Pictures/Libraries/K2 Library.aplibrary"???

    Library recovery: how can I recover a library after I get this message: "There was an error opening the database for the library “/Users/Jim/Pictures/Libraries/K2 Library.aplibrary”???

    Thanks a lot, Frank. The lsregister did the trick! I am testing this on 10.8.2.
    http://support.apple.com/kb/TA24770 : I deleted the "com.apple.LaunchServices.plist", and restarted the Finder, even logged off and on again; did not change anything. The file has not been recreated, so it may not be used anymore.
    http://itpixie.com/2011/05/fix-duplicate-old-items-open-with-list/#.ULZqa6XAoqY
    The direct "copy and paste" from the post did not work: I had to retype it :
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchSe rvices.framework/Versions/A/Support/lsregister -kill -r -domain local -domain system -domain user
    but then it worked like a charm!
    Cheers
    Léonie
    And btw: I turned on the "-v" option for the lsregister to see, what was going on, and saw plenty of error messages (error -10811); so I repeated the command with "sudo". After that I still saw five iPhotos. Repeating as regular user finally got rid of the redundant iPhoto entries. It looks like registering as super user may be causing this trouble.

  • How do I recover a background after accidentally deleting it from the background catalog

    How do I recover a background after accidentally deleting it from the background catalog

      Close Photoshop Elements Editor and Organizer.
    Navigate to:     
    //Library/Application Support/Adobe/Photoshop Elements/11.0/Locale/en_US/
    Delete the file Mediadatabase.db3.
    Re-launch Photoshop Elements Editor. A progress bar appears as the media database is re-created. Wait for this process to complete. It make take some time and the screen may periodically go blank; so go away and get yourself a coffee and be patient.
      N.B. If you have any of your own custom effects, you may need to re-create/re-install them.
     

  • HT201365 How can I recover my Iphone after I erase it?

    How can I recover my Iphone after I erase it because I erase my Iphone from find my Iphone and I can't activate it agin.

    Why can't you activate it again? Plug it into your computer and restore it if nothing else works.

  • HT204088 how do you recover itune money after you deleted number from account?

    How do i recover my money after i deleted the itune card number?

    Once you redeem the card the balance stays in your account until you use it.
    You only need the card once.

  • After a software update the youtube icon disapeared from the ipad. How can i recover it?, After a software update the youtube icon disapeared from the ipad. How can i recover it?

    After a software update (the instalation of ios 6), the youtube icon disapeared. How do i recover it?

    YouTube is  not now part of iOS 6. However, you can download the YouTube app at http://itunes.apple.com/app/youtube/id544007664.
    See this similar post https://discussions.apple.com/thread/4335468?tstart=30
     Cheers, Tom

  • How do I restore Firefox base after reinstalling Windows , but I have file system safe(all program folders)?

    How do I restore Firefox base after I reinstalled Windows , but I have my system and program old folders safe. ( exact Firefox Application and Program Files folders etc)?
    == This happened ==
    Every time Firefox opened
    == I reinstalled Windows

    What I mean is I have saved passwords and some website adresses in my Firefox that was on deleted windows ( but I saved the file system so it works from there using another computer) but all I need is passes and saved links . just the complete copy of my old setups and such . is that possible?

  • How can i recover my database after losing system data file.

    hi everyone,
    how can i recover my database in the following scenario.
    1. offline complete backup taken 2 days ago. database was in archive mode.
    2. today i lost my system data file, and also lost my all archived files.
    3. i started up the database but, the following error was generated.
    SQL> startup
    ORACLE instance started.
    Total System Global Area 135338868 bytes
    Fixed Size 453492 bytes
    Variable Size 109051904 bytes
    Database Buffers 25165824 bytes
    Redo Buffers 667648 bytes
    Database mounted.
    ORA-01113: file 1 needs media recovery
    ORA-01110: data file 1: 'D:\ORACLE\ORADATA\ORCL\SYSTEM01.DBF'
    4. i copied the system data file from backup and wrote the following statement, to recover the database.
    SQL> recover datafile 1;
    ORA-00279: change 2234434 generated at 07/15/2009 10:52:10 needed for thread 1
    ORA-00289: suggestion : C:\B\ARC00051.001
    ORA-00280: change 2234434 for thread 1 is in sequence #51
    Specify log: {<RET>=suggested | filename | AUTO | CANCEL}
    now i don't have any archive file. is there any chance to recover the database ?
    R e g a r d s,
    Asif Iqbal
    Software Engineer,
    Lucky Tex, Karachi,
    Pakistan.

    now i don't have any archive file. is there any chance to recover the database ?If no archive log files are available you can't recover the datafile.You need to have all the archives from the time of offline backup was taken till the system datafile is lost.
    Anand

  • How do I recover missing music after subscribing to iMatch?

    I had 152 songs on my iPhone 5. I recently subscribed to iMatch so I could have access to the music on other Apple devices; iPad, iMac, etc . . . When I turned on iMatch, only 25 songs were available. What happed to my other music and how do I recover the missing song?

    Where did the music come from e.g. bought from iTunes, copied from CDs ? You can only upload music to iTunes Match from a computer's iTunes, so if those songs were copied from CDs then were they in your computer's iTunes library when you subscribed to it ?
    When you turn on Match on an iOS device you are effectively saying that you want to replace the music that is on that device and use what you have stored in Match instead.

  • How can i recover my iphone after i remote lock it

    i bought my phone from a friend so it isnt register but i remote lock it how can i recover it

    http://support.apple.com/kb/HT2526

  • Recover a Catalog after Reinstalling PE11

    I just added a SSD drive to my computer and reloaded all software including Windows 7 and Photoshop Elements 11 onto this new system drive.  I did not make a separate backup of the Organizer Catalog beforehand, however the catalog is stil on the hard drive, now to be used as a data drive.  How can I recover this catalog?

    See if the following help document helps...
    Photoshop Elements Help / Use Backup, Restore to move catalog | Organizer | Elements 6 or later -
    http://helpx.adobe.com/photoshop-elements/kb/backup-restore-move-catalog-photoshop.html

  • How to sync with Firefox sync after reinstalling Windows? I only have one device.

    Just like this user I was syncing only one device. After reinstalling windows, I can't reconnect and I don't have the recovery key...
    What can I do? To access my bookmarks, favorites, etc?
    Thanks!

    Thanks for the replies. Unfortunately I'm missing the recovery key and don't synch with other devices so I guess that means I'm out of luck...
    Maybe this is something that can be added to the roadmap for future improvements. I don't see a reason why you can't get your information back after a reset if you've only got one device.

  • How to recover title styles after reinstalling?

    I recently reimaged my computer in hopes of reducing crashes with FCPX.  That seemed to work but I've lost all of the title styles on work from the past year.  I believe I have the same fonts installed.  The titles may have been associated with styles I created and saved so maybe the styles are gone for good.  I assumed they would have some reference to fonts and size still available.  I exported the xml to have a read and can see no references to styles or fonts anywhere.  Any one have any insights?  Thanks.

    Open the Previous Systems folder, find his home folder, drag it to the desktop, click Authenticate, provide an administrator password, go through the folder on the desktop for the files you want to keep, and throw the rest away.
    (28264)

Maybe you are looking for

  • Multiple target messages

    Hello, for our business process, we need to map a single source message to multiple target messages (of different message types). The (ABAP)mapping takes care of this mapping, so I put a transformation step after my receiver step, that invokes this m

  • Query from the data abse  and pass values to a pdf form

    query from the data abse and pass values to a pdf form Hello Hello i have this html report that i have written to output a report. now, i am assigned to pass the same fields to a pdf form so the fields in the adaobe form can be populated or the term

  • Access data in custom component.

    Hi Everyone,                 I am new to Flex soo pardon me if my questions are quite basic. I have searched a lot before posting here, might be I was not looking in the right direction. Please redirect me to the path that leads to the solution of th

  • Dynamic field in forms

    Hi there, I'm working on SCSM forms customization and I'd like to reproduce the behavior of the priority field : change the value of a textbox based on the value of two other textboxes. At the moment I successfully implemented a custom user control a

  • Tables where I can find information about IP variables, Infoprovider aggreg

    Hello All, Tables where I can find information about IP variables, Infoprovider aggregation level and filter. The tables where we have info about tthe user exit variables. Similar to that of UPC* tables in BPS. Thanks a lot, Karthik Krishna