How do I recover my foxfire stuff after a complete system recovery on my PC

I came down this morning and my PC was in recovery mode! I was able to back up my system before restoring is, but I don't know how to get my bookmarks and speed dial sites to load up into my newly installed version on Firefox.
I can see all my backed up info files for firefox on my PC.
when I go into the recovery, Apps/roaming/firefox/ there is file or directory with random letters and numbers. When I do to bookmarks library in my NEWLY INSTALLED version of Firefox, the file or directly has a different set of random letters and numbers. I am wondering if every new install gets a new one of those files/directories as my old one is not being recognized in my new version of firefox.
Thanks

Playlists should be part of your backup copy.
You can redownload some purchases in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

Similar Messages

How to access my I-Tune store after a full System Recovery reboot

Because of some issues with my PC, I had to reboot my computer to its orginal settings. How can I regain access to the songs I purchased with my account ?

So you made full System Reboot and didn't make a backup...
Do you have an iPod with those songs or something like that?
As you should know, every music you download will be stored on your HD. If something happens to your Hard Drive, all content will disappear! You can authorize up to 5 computer, to let them play your songs. However you made a reboot, so all your music are gone...
Now you have two options: Download them again or contact Apple and ask them for a re-download, but I'm not sure they will offer it.
Good luck!

How do I recover a word file after a force quit

how do i recover a word file after a force quit

Do you have Word's AutoRecover switched on?

How can I Recover an iMovie project after the program shuts down unexpectedly?

I was working on an iMovie when the program shut down unexpectedly. I had worked on this project many times before and it always showed up in my project library. After the shutdown, however, I tried to open up the project and it is no longer in the project library. I can find it in the finder but when I click on it, it will open iMovie but the project is not listed. It has to be in there somewhere! How can I recover it? Please hlep!

There are numerous reports here on the forum about this issue (I've been bitten by it too). It's becoming an epidemic.
Here's one thread:
https://discussions.apple.com/message/21157327#21157327
The recent update to iMovie '11 (to version 9.0.9) may have fixed this, but it's impracticable to test, given the random nature of the problem.
The best solution is to always have Time Machine running when editing in iMovie. Also, with larger projects, it's a good idea to duplicate the project from time to time. To duplicate, while in Project Library view (where all your projects are listed), select File > Duplicate Project. Project files are relatively small, as they mainly reference the associated Event (or Events), as well as keeping track of your edits, titles, transitions, music and so forth.
John

How can I recover my phone memory after the software update...

Hi,
My has been dead for one day, after continuous trying, I got a pop window to install the updates. I thought only updates and clicked on it. But it took long time and my phone got reset. All my data which was stored on phone memory got wiped out. I didn't use blackberry link before. First time I used it and it was happened like this.
Please help me how can I recover that data again. Please guys..I lost very important data..plz do help me..

Hello,
Restore depends on a source of data from which to restore. BB provides plenty of FREE methods to backup your data and thereby protect that priceless resource. If you did not avail yourself of that, then you have migrated from the latter to the former in this old saying...there are 2 kinds of computing device users -- those who have lost data, and those who will. Backups, like insurance, are neither a reactive nor an optional activity.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

How can I recover/restore recent history after it's been deleted?

My daughter deleted recent history. My Facebook account has a layer of protection that stored my computer information. When she deleted the history, Facebook no longer is able to detect my computer and I am not able to log into Facebook. How can I recover or restore the history (everything)?

index.dat is not one of the files used by Firefox, that is for Internet Explorer. You may need to contact Facebook to get access to your account again.
Once history and cookies are deleted in Firefox they can not be recovered.

How can I recover my CS6 license after a hard drive crash?

I work in a small corporation, one of my employees suffered a harddrive crash and lost her cs6 installation.
For whatever reason, our IT dept (who insists on handling our licenses and installs) cannot locate her license info. We paid a significant amount of money for that license, how can she recover?
If the answer is contact support, then I need a phone number to call.

If thew software was registered then the serial number could be avaiilable thru the Adobe account it was registereed under.

How do I retrieve my music library after a complete computer crash. I have a backup on a flash drive and I can access my Itunes account but my play lists and music are gone.

How do you retrieve downloaded music and playlists after a complete computer crash. I can log into my Itunes account and make purchases but my music library is gone. I have an external backup on a flash drive but for some reason the music does not show up there either. It's like I have a brand new account and have to start all over. Itunes must have an archive I can access to get my music back, right?
Maya

Playlists should be part of your backup copy.
You can redownload some purchases in some countries:
Downloading past purchases from the App Store, iBookstore, and iTunes Store

After doing a system recovery, I am unable to do the microsoft updates. How do I continue to update

I have a media center m1070n with windows XP. After completing a system recovery, I try to get all the windows updates but it won' let me. How do I continue to get all the proper updates so I can download my Norton?

xray_amy wrote:
The only things I have done are the ones that automatically start after recovery. This is a desktop computer not a notebook so do I need "enhancements and QFEs" you mentioned?
There is a topic in the HP Web support page that is titled "things to do after a recovery". I will edit this and link to it . A recovery to "factory state" actually does not do everything. That is why after a recovery or restore of any kind it is wise to take a lookmin the device manager to see if all of the devices you desktop PC was delivered with have their drivers installed and are enabled.
Notebooks and desktop PCs have operating systems and the operating systems can be identical. That is one thing in which they do not differ. Notebooks have far less of an "open architecture" that desktop pcs have.
Yes.. enhancements and QFEs (quick fix engineering) are needed as they are created by Microsoft and HP to correct and enhance the operating system and installed hardware. You should install them as they are specifically for your desktop PC and its operating system. Once you install them you should be able to update to SP2 and then SP3. Here is an important document from HP on updating to Winpows XP SP2. Be certain that you create a restore point before updating to SP3. Here is a document from Microsoft on what to do before udating to Windows XP SP3.
You may also find this document on updating drivers and Windows with Windows update interesting and useful.
Best regards,
erico
****Please click on Accept As Solution if a suggestion solves your problem. It helps others facing the same problem to find a solution easily****
2015 Microsoft MVP - Windows Experience Consumer

How do I restore my backup (.wim files) after running HP System recovery on a G62 with windows 7

I had to do a system restore after getting a blue screen and I backed up the files on my external drive. after restoring the system I tried to restore my files from my external with Recovery manager but it didn't see my external so I couldn't restore. I copied and pasted the backup folder on my g62 desktop and tried again with no results. As far as I can tell the restore was done because my free space on the g 62 decreased by the same size as the backup, but when I open the c:\ drive I can't see the transfer. these are .wim files and I even tried to call tech service (my warranty juse expired) and they were trying to sell me extended warranty for the next year to help me. the problem exist with HP if they had good programs that follow up what it was meant to do maybe Today I wouldn't be here looking for help. when I restored the system, recovery told me the it would install my backup, but nothing happened leaving me hanging.NEED HELP!!!!!!!!!!!!!!

If you call AppleCare they will be more than willing to help you. Use the appropriate phone number on this page. Tell them you need a support related fulfillment - replacement disks. As shldr says there will be a small charge, but you will be able to install your system again.
Best of luck.

Windows Vista/Service Pack 2-after performing a System Recovery my Hard Drive is full.

     I would like to thank you in advance for your patience. I am new to this forum solution method. I will do my best to explain what is happening with my computer without too much unnecessary information.
     My laptop is 2 yrs old and it all these error messages started popping up repeatedly. Windows Defender wouldn't open, system info errors, I/E crashes and so on. After numerous attempts to fix it myself, I asked Microsoft support for the solution.     M/S Tech Support instructed me to perform a System Recovery, through the startup/F-11 method and so I did. I followed all of M/S instructions and to skip the step for making a set of Backup disks, as well as the Recovery Manager's steps to complete the recovery. After all was done I noticed that all my personal files, (pic's, music, etc...), were gone and that my Hard Drive is out of space. I did a Disk Cleanup and defrag on both the C: and D: drives hoping that it would solve my problem. NOT!!! I have been looking through all the "Trouble shooting" support topics on both MS and HP. I have been afraid of doing any of the MANY suggested steps for fear of causing more damage.  The computer, except for the D: drive delima and Windows Defender not opening, seems to function properly, so I look at that as the real blessing in all this.
     Please help me by telling me that there is a way to fix the Hard drive and get Windows Defender to respond. Most importantly, how to go about getting it done. I just don't know how or why this happened.
     Thank you so much for your help. Nice to know that there are web sites and forums like these to go to for help. I look I look forward to your response.

This excerpt taken from HP manual for your computer.
On some models, you can perform a recovery from the partition on the hard drive from either the Start
button or f11. This restores the computer to it's factory condition.
To restore the system from the partition, follow these steps:
1. Access Recovery Manager in either of the following ways:
● Select Start > All Programs > Recovery Manager > Recovery Manager.
– or –
● Restart the computer and press f11 while the “Press <F11> for recovery” message is displayed
on the screen. Then select Recovery Manager.
Recovery Manager opens.
2. Click Advanced Options.
3. Click System recovery, and then click Next.
4. Follow the on-screen instructions
Does this sound like what you did?
Oh yeah, Your D:\ drive is your Recovery partition and you should never mess with it.
It contains all the information to restore your computer to factory condition.

HT4718 How to prevent the lac going to sleep mode in system recovery ?

While trying restore the entire HD image to a different hdd in system recovery mode the laptop goes to sleep.
How to prevent it ? the system recovery does not seem to have any terminal app so cannot issue caffeinate command either :/

have you tried to restart your computer

Windows stuck on blue HP Invent screen and won't load desktop items after doing a system recovery

Hello, this is my first time posting here, as I am in desperate mode! I have a HP Pavillion Slimline s5304y desktop pc, using Windows 7, that I purchased in Feb 2010.
After getting a virus on my computer, I ordered system recovery disks from HP and did the recovery to original factory settings process (twice!), however, during the Windows setup process, it doesn't ever get past the blue HP Invent screen that says:
--Do not turn off your PC during this one-time setup process
--Your PC restarts several times during this setup process
--Messages may pop up onto your screen. Ignore these messages until you are prompted to restart or shutdown your PC
Towards the bottom of the screen it continues to say "Please wait..." with a scrolling green bar. All I see is the windows start buttom in bottom left corner but am not able to access anything and I don't ever get my desktop screen or desktop icons. I have restarted and shut down several times and as soon as I log on to windows, I just get that same blue screen.
The 2nd time I did the recovery process, I let it continue overnight (just in case I wasn't waiting long enough) and my computer never shutdown like it was supposed to when the installation was complete. Also, I watched the whole process the first time around and my computer never restarted like it said it was supposed to; it just seemed to be stuck during the rest of the windows setup process. It eventually just went into sleep mode.
I don't have anything else plugged in except the power cord, the monitor and the keyboard/mouse. I have not installed any new hardware since I purchased the computer.
I did a diagnostics test and everything passed.
I tried to get help from HP Support, but because I'm out of the warranty period, they cannot help me and want to charge me $99!!!
I don't know what else to do at this point. Can someone please help???
Thank you.
This question was solved.
View Solution.

Hi,
I would try wiping the entire Hard Drive first and then reinstalling the Operating System as this may get around this issue.
Download and install Killdisk on the link below - ( despite the name, this application will just write zeros to the entire drive leaving it in a similar state to a new Hard Drive ).
http://software.lsoft.net/KillDiskSuiteFree-Setup.exe
Download and install ImgBurn on the link below.
http://download.cnet.com/ImgBurn/3000-2646_4-10847481.html
Go to the Kill Disk application you have installed in All Programs, open the main folder, then select Bootable Disk creators and from that select Bootable DOS CD Creator which will burn the bootable ISO to a blank CD.
During the next process do not worry about any warnings as your Recovery DVDs will reformat the HDD.
Insert this CD in to your PC that is unable to load Operating System properly. Shut the PC down, then start it again to boot from the Killdisk CD and follow the on screen instructions for Kill Disk.
A brief description of the process is here Killdisk.
Use this to wipe the whole of the Hard Drive, highlight (80h) and press f10 ( you will also have to type a confirmation and hit enter ) - ( this will make sure you include all partitions and then start the process - this may take a couple of hours! ).
When the process is complete, remove the Killdisk CD, insert your first HP Recovery Disc and try the installation again.
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How do I recover QuickTime Player X after I accidentally deleted it?

After accidentally deleting QuickTime Player X, I can't seem to recover it at all. Right now I'm resorting to QuickTime 7, but I can't do screen recordings without Quicktime X. I have searched everywhere on how to recover it, Google, wikipedia, YouTube.....etc. to no avail. Does anyone have any ideas?

Use Pacifist to extract it from your Mac OS X 10.6 DVD and then run the Mac OS X 10.6.8 combo updater.
(84788)

How do I recover my apps to after I restored my phone?

I had a problem while syncing my phone to itunes and then my phone was stuck on the apple start up screen. So then I looked up how to fix it, and it said to plug it back in and hold down the home button to restore it, so that's what I did. Only I didn't know that It would delete my apps and all the data in them. I read that I could recover my apps by syncing my phone to itunes... only my apps aren't even in my itunes anymore. It says "0 apps." Can anybody help me with this? Please a thank you!!a

You can download previously purchased apps. See http://support.apple.com/kb/HT2519.

How do I recover my foxfire stuff after a complete system recovery on my PC

Similar Messages

Maybe you are looking for