How do I recover my original layout after pressing outline and having it all disappear? (com+z wont help)
I have been working on a 9 page document on Pages, creating my own layout, when I, for some unknown reason, pressed the outline option. This made my entire layout disappear. When I pressed undo or command+z it returned with only my front page, everything else blank. I freaked out and quit then re opened pages and there is still everything just... blank. Is there anyway I can find my version i was working on yesterday or anything? Any recovery software that will help with this? I have a deadline this week and can't redo it, most of it was thought up while I was creating it. PLEASE HELP ME!!
Select Hide Document Outline from the View menu. (And redo whatever you undid.)
Similar Messages
-
i launched photobooth for the first time after upgrading from snow leopard to mavericks (ugh, hate mavericks) and noticed it "updated" all my photobooth files by resizing them. now they're all funky looking and cropped. does anyone else have this problem? how do i recover the original uncropped photos?
Select the photo in iPhoto and use the command "File > Export" and set the "Kind" in the Export panel to "Original". That will write a copy of the original to a folder you can access in the Finder.
The command "File > Reveal in Finder" will show you the original inside the iPhoto Library, but you must not access the files this way. If you access them from other apps using the Finder, you will corrupt your library.
See Terence Devlin's user Tips:
iPhoto and File Management
How to Access Files in iPhoto
To what purpose do you need to find the files? Is there a problem and iPhoto giving an error message about missing originals? -
Where are these unix executable files coming from and how do I recover the original text file?
where are these unix executable files coming from and how do I recover the original text file?
When you upgraded to Lion did you have AppleWorks installed on your mac?
Most of the AW documents can be opened by Pages 09 or Numbers 09 with most of the orginal format in tact. (I do not know if previouse verision will work) just open the AW file with both and see which one works best.
Text Edit will also open most of the AW files as well but will require a lot of work to restore them to their orginal format.
If you have AW Database documents then they are not supported.
These document show up as "exec icons", Kind: Unix Executagle File.
They also will show up as .cwk file if they are small files. I have a couple that were under 1mb that are shown as " Kind: AppleWorks Document" but will not open.
The only option to open AW database is to have AW installed on a mac with a pre-Lion OS to recover the file. -
How do I recover a word file after a force quit
how do i recover a word file after a force quit
Do you have Word's AutoRecover switched on?
-
how do i recover music from old computer. its broken and i did not have the music backed up on any other hard drive.
OK, well, seems like you need to lose the attitude if you really want help.
There are several ways to get music from iTunes on your computer to your device.
The easiest is to sync directly with iTunes by connecting your device to your computer, selecting the device, setting up your Profile pages, and then clicking the Sync button to sync.
First you want to open iTunes and under Preferences>Devices, make sure that you are not syncing automatically:
Make sure that box is checked.
Then follow the instructions in the article below for either your computer or your Mac to set up your Profile pages and to sync your music via iTunes:
WINDOWS IOS SYNC ITUNES 11
iTunes 11 for Mac: Set up syncing for iPod, iPhone, or iPad
You can also directly download music from iTunes to your device by going to the iTunes icon, going to "Purchased", and selecting the items that are not on your device that show a little cloud next to them. Click on the cloud and the music will download.
You might also want to familiarize yourself with your iPhone 5 manual. It has all the answers you cannot find on Google or by trying to just do it by brute force. If you would take a little time to read about your device and how to use it, you might not be so frustruated and unnecessarily snarky to people who are trying to help:
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
Best of luck,
GB -
I'm having a problem with cookies on Safari.
Even after setting system preferences to Never accept cookies and having deleted all cookies, Safari continues to add cookies. I've tried to Reseting Safari several time but the problem persists. This is occurring under two different user logins one of whom is an administrator the other a standard user. How can I get safari to Never accept cookies? This is a recent problem because in the past it used to work properly. Any idea what might be going on here?Hi David:
I did read (yesterday in another thread) about a similar problem. I cannot test it myself as I accept cookies (from sites I visit) and do not want to delete all of mine for a test.
I do not know whether it meets your requirements, but you could turn on private browsing. I use that (or Microsoft's variant on IE) when I use public computers.
Barry -
I found my old classic ipod after 5 years and I wanted all the music from it , and I plugged it onto my computer and it ended up deleting everything how can or can I retreve them ?
The Restore erases the iPod's hard drive, so the song files are gone.
It is like an external hard drive (if you set the iPod to Enable disk use), so standard data recovery utilities may (?) allow you to recover erased data, like you might from a regular external hard drive. -
I just updated my Iphone 3G and now it won´t work anymore. It wouldn´t even boot. It was just working for 3 sek. after the installation and now it shut itself down. Any help, please? Thankyou
I suspect you have a 2G iPod. Those can only go to iOS 4.2.1.
Identifying iPod models
iPod touch (3rd generation)
iPod touch (3rd generation) features a 3.5-inch (diagonal) widescreen multi-touch display and 32 GB or 64 GB flash drive. You can browse the web with Safari and watch YouTube videos with Wi-Fi. You can also search, preview, and buy songs from the iTunes Wi-Fi Music Store on iPod touch.
The iPod touch (3rd generation) can be distinguished from iPod touch (2nd generation) by looking at the back of the device. In the text below the engraving, look for the model number. iPod touch (2nd generation) is model A1288, and iPod touch (3rd generation) is model A1318.
You also said: "It also will not let me download any music onto it." What happens when you try to sync music to the iPod? -
After installing ios5 and having had to change my apple id to e-mail address I am unable to download updates as they were purchased under my previous id and it will not allow me to get back into the old id Help please.
Make sure you enter your new Id in settings/message, settings/facetime. ANy content that you downloaded with the old ID is forever linked to that old ID and if you have apps that were downloaded with the old ID and you want to update them you can only do that with the old ID. You could delete those apps and downlad them again ( and pay for them if they are not free apps)
-
How can I set screen saver clock which show time and date when all screen is black. Other phones have this option but I didn't find on iphone. Pl guide.
HA! I figured the find my iphone out!!!!! You can have more than one icloud account in "Mail, Contacts and Calendars". So my husband's & kids' phone icloud account under "settings, icloud "is their individual @me.com account. Set it to everything you want EXCEPT Find My Iphone. Then under "settings, mail/contacts/calendars" you set up both accounts (your @me.com which may already be there), then add another with the main appleID and enable ONLY Find My Iphone. Now when any of us log into Find My Iphone from any device with our main apple ID for the app store, all the devices show up!!!! YIPPEE. I made my own day!
I think the message I got previously was because I hadn't disabled the find my iphone on the @me.com account first. -
I am trying to install a brand new WD 500 gb sata internal hd in my macbook pro. the original install dvd does not recognise the hd. all hardware is ok. any help?
For some reason OS X disks (whatever edition or flavors) that are supplied with Apple products only seem to contain a limited knowledge of available hard drives on the market at the time of thier publishing. This (rather opportunistically) creates a "Best Before" stale-OS X-software-copy situation where upgrading to or replacing a defective internal SATA hard drive with a newer, better or larger one is a largely hit and miss affair.
If you buy the latest and greatest disk drive available for any older Mac you are likely to run into unresolvable problems making a clean re-install of your own, old edition or flavor of OS X onto any newer or larger hard drive since the OEM (gray) "OS X Install Disks" that Apple supply with retail products seem to contain only time-sensitive lists/mapings of then-known target drives that the Drive Management Tool in the then-published old "Installer Software" will support.
Presumably new (colorful "X") retail versions of OS X (10.whatever.whatever) also contain time-limited Installers with limited knowledge of and adaptability to/compatability with a limited number of old hard drives then kicking-around on the market.
This is especially a problem nowadays since the countless "puny old" hard drives that have been on the market are largely obsolete in a few months time, as manufacturers continue to produce larger and cheaper units, discontinuing older puny products... So if your drive fails you need an exact old (or similar familial) replacement drive for your "backup copy of OS X" to do a fresh, clean OS X re-install. Otherwise you need to purchase a new retail version of OS X, since yours is now effectively obsolete. Purchasing an old, puny drive to re-install your version.flavor of OS X to avoid buying a new version of OS X is a rather false economy.
If you still have a working old hard drive with your old polluted 10.version.flavor of OS X still working on it you apparently must clone it with Time Machine or the newest version of Disk Utility (disk image copying) to most newer, larger drives, and a clean reinstall to such new hard drives is not possible. -
I can't scroll down to read my ebook. I have to change pdf view after pressing pg dn to view the next page. Please help!
Sorted out the problem myself - secret is you have to go to Full Screen view to be able to scroll down. Easy as that - but not so apparent if you are new to this.
-
The red X has appeared in my Ipod Classic Screen. Apple support tells me that I need to first put it manually on disk mode. to put it on disk mode I ought to press menu and select buton togeher, when the apple sign shows up, hold select button and play together.
After pressing Menu and Select, when the Apple sign appears, I immediately press select and play/pause, but again the red X sign appears. so it does not go to Disk Mode. Has anyone had this issue? I would be grateful if you could tell me what to do.Thank you everyone for the replies. It defiantly helped point me in the right direction. With any luck, I will have my replacement phone sometime tomorrow.
I was able to call the iPhone support line this morning. The Apple rep stayed on the line with me for about an hour until he was sure the new phone would ship out. For $199 plus $29 for expedited handling I was able to get the replacement ordered with overnight shipping. Since the replacement doesn’t involve ATT&T I have no reason to suspect any further delays. Kudos to the Apple rep that helped me straighten out this mess.
It’s a shame that AT&T cares so little for their existing customers. Not only did they try to sell me the same phone for $499, they outright refused to help me. They also lied to me on numerous occasions and strung me along for close to three weeks for something that only took an hour to complete with the Apple rep.
I filed a formal complaint against AT&T through the Better Business Burrow as well as requested a review of our cooperate contract with AT&T. Our company currently has over 3000 phones with AT&T and there contract comes up for bid the end of our fiscal year (this October). We will be giving it heavy consideration before we consider renewing their contract.
I doubt that any of that will matter to a company that cares so little about their customers, but you never know.
Thanks again for all your help. I would probably still be trying to get my replacement for the next few months if it wasn’t for your suggestions.
-Niel -
How can I Recover an iMovie project after the program shuts down unexpectedly?
I was working on an iMovie when the program shut down unexpectedly. I had worked on this project many times before and it always showed up in my project library. After the shutdown, however, I tried to open up the project and it is no longer in the project library. I can find it in the finder but when I click on it, it will open iMovie but the project is not listed. It has to be in there somewhere! How can I recover it? Please hlep!
There are numerous reports here on the forum about this issue (I've been bitten by it too). It's becoming an epidemic.
Here's one thread:
https://discussions.apple.com/message/21157327#21157327
The recent update to iMovie '11 (to version 9.0.9) may have fixed this, but it's impracticable to test, given the random nature of the problem.
The best solution is to always have Time Machine running when editing in iMovie. Also, with larger projects, it's a good idea to duplicate the project from time to time. To duplicate, while in Project Library view (where all your projects are listed), select File > Duplicate Project. Project files are relatively small, as they mainly reference the associated Event (or Events), as well as keeping track of your edits, titles, transitions, music and so forth.
John -
How can I recover my phone memory after the software update...
Hi,
My has been dead for one day, after continuous trying, I got a pop window to install the updates. I thought only updates and clicked on it. But it took long time and my phone got reset. All my data which was stored on phone memory got wiped out. I didn't use blackberry link before. First time I used it and it was happened like this.
Please help me how can I recover that data again. Please guys..I lost very important data..plz do help me..Hello,
Restore depends on a source of data from which to restore. BB provides plenty of FREE methods to backup your data and thereby protect that priceless resource. If you did not avail yourself of that, then you have migrated from the latter to the former in this old saying...there are 2 kinds of computing device users -- those who have lost data, and those who will. Backups, like insurance, are neither a reactive nor an optional activity.
Good luck!
Occam's Razor nearly always applies when troubleshooting technology issues!
If anyone has been helpful to you, please show your appreciation by clicking the button inside of their post. Please click here and read, along with the threads to which it links, for helpful information to guide you as you proceed. I always recommend that you treat your BlackBerry like any other computing device, including using a regular backup schedule...click here for an article with instructions.
Join our BBM Channels
BSCF General Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code
Maybe you are looking for
-
Services stopped responding to requests after several updates
This week all services on a G5 dual 1.8Mhz tower stopped responding. Unfortunately, I cannot find a trigger event for this though perhaps it is related to recent updates. The services that stopped responding include bonjour, ssh, remote desktop/manag
-
I have a couple of ARD users who would like to schedule reporting to their own machines. Although they are ARD admins, they are not admins of their desktop Macs. All report scheduling options are greyed out for these users, even though 'Full access t
-
I have many scripts which read data from source databases via various dblinks. I use DBMS_Jobs to run these automatically every night. There is now a requirement be able to set the dblinks using a parameter. How can i do this? A secondary problem wil
-
How to make script depended on specific network???
I hope that someone can help me with this. I do not yet have much experience with scripting, but I made a script which connects my macbook to a folder on my NAS. However, if my local network is not available the script will hang itself waiting until
-
Very slow Sorting 48 million of records
Hi All, I am working on a project to calculate calls, inbound and outbound at a telecom company. We get 12 million call records everyday i.e. Calling_number_From , Call_start_time,Calling_number_to and call_end_time. We then split these records into