How do I recover my photoshop elements after hard drive replacement?

I recently had to replace my main drive on the computer, so I have to reload all my software.  I originally installed photoshop elements 3.0 and still have the CDs and serial number, but cannot install it because it isn't compatable with windows 7.  I had upgraded to 5.0 and have that CD, but it is upgrade only and will not install because it cannot detect an earlier installation.  I do have all the files copied from my previous drive into a directory in the new drive, but the installation of 5.0 didn't find what it needed, even when I gave it the correct directory.
How do I get my photoshop elements back on my computer?
Thanks!

You should not need to reinstall Elements 3 at all. Upgrade disks contain the full version of the software. The serial numbers tells the installer if you have a full version or an upgrade.
Just install Elements 5 from the upgrade disk, enter your Elements 5 upgrade serial number then enter your Elements 3 serial number when prompted.

Similar Messages

  • Re-installing Photoshop Elements after hard-drive 'wipe'

    I have to have my hard-drive 'wiped' thus erasing all installed programs.
    Do I just use the disc and product code on the box to re-install P.E.?

    Yes. You need your serial number, not the redemption code if you had one of those. The redemption code is only used once, to get a serial number and then you use the serial number from then on. If you need help finding your serial number:
    Find your serial number quickly

  • How do i recover data from an external hard drive that was accidentally deleted?  After I verified the drive, a message appeared that said my drive needed to be repaired.  When I tried to access the drive again, the 700 Gigs of music is gone!

    How do i recover data from an external hard drive that was accidentally deleted?  After I verified the drive, a message appeared that said my drive needed to be repaired.  When I tried to access the drive again, the 700 Gigs of music is gone!

    Stop using the drive immediately, un plug it.
    Buy a copy of ProSoft DataRescue 4 and use it to search for deleted files.

  • How do I recover data from my dead hard drive?

    How do I recover data from my dead hard drive?

    Is it dead or corrupt? There are recovery programs out there, however if your HD is head, paying pros to do data recovery is VERY costly.       Some have removed the platters and installed them in likewise drives that dont have head crashes, but torque tolerances are tight, and doing it right is a bit advanced and tricky for most. Ive done HD disk swaps 4 times and had success 3 of the 4 times. It requires cannibalizing another working HD.   In the future remember the golden rule, 2 copies is 1, and one is NONE.
    Its likely you could find a local computer repair station that can do it for you cheaply.  HD dont really "die", they have fried SATA bus, or crashed HEADS........the platters DO demagnatize over long time due to heat and degauss of the data (poor storage, etc).........but in specific, a HARD DRIVE DOESNT DIE ,.........only the flying head mechanisms that read and write the data, and SATA / bus that feeds the data DIES,.......but the data (unless corrupt or magnetically corrupted) is THERE

  • How to restore Itunes account after Hard Drive replacement programme

    I was part of the Hard Drive replacment programme by Apple after which I have set up my computer as normal to find all the music, filmas and apps have gone from my Itunes Acccount can anyone help

    Restore all of your important data from the backup of the computer.
    If you have no backup, the library and playlists should be possible to recreate by following the instrucitons here: http://support.apple.com/kb/ht1451

  • MacBook Pro won't reboot.  Get spinning circle even after hard drive replaced at Apple Store

    MacBook Pro won't reboot.  Have to reinstall OSX each time I shut down in order to get it to start up.  What could be wrong?  I had the hard drive replaced already.

    You shouldn't be using the disc at all. I thought I had made that clear. Boot from your recovery partition and run Disc Utility. If you get the same result -- the internal drive can't be repaired -- then you should consider replacing it. No storage device can be trusted, in my opinion, after throwing an error like that. But whether you choose to replace it or erase it, you have to get the data out first.
    There are several ways to back up a Mac that is unable to fully boot. You need an external hard drive to hold the backup data.
    1. Boot from your recovery partition (10.7 or later), a local Time Machine backup volume (10.7.2 or later), or your installation disc (10.6.8 or earlier.) Launch Disk Utility and follow the instructions in the support article linked below, under “Instructions for backing up to an external hard disk via Disk Utility.”
    How to back up and restore your files
    2. If you have a working Mac, and both it and the non-working Mac have FireWire ports, boot the non-working Mac in target disk mode by holding down the key combination command-T at the startup chime. Connect the two Macs with a FireWire cable. The internal drive of the machine running in target mode will mount as an external drive on the other machine. Copy the data to another drive.
    How to use and troubleshoot FireWire target disk mode
    3. If the internal drive of the non-working Mac is user-replaceable, remove it and mount it in an external enclosure or drive dock. Use another Mac to copy the data.

  • Spotlight not indexing after hard drive replaced

    Hi all
    Just wondering if anyone knows how to encourage Spotlight to re-index? Just had my hard drive replaced as part of the recall, and now Spotlight wont index anything.
    I've tried previous suggestions (adding and removing hard drive to privacy list, commands through terminal etc), but it's still not working.  All the software is up to date (10.7.5).
    Any ideas?  It's incredibly annoying, and making working on this computer virtually impossible at the moment.
    Cheers

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left.
    Enter "mdworker" (without the quotes) in the Filter text field. Post the most recent 50 or so messages that appear in the Console window — the text, please, not a screenshot.
    If there are runs of repeated messages, post only one example of each. Don't post many repetitions of the same message.
    When posting a log extract, be selective. Don't post more than is requested.
    Please do not indiscriminately dump thousands of lines from the log into a message.
    Some personal information, such as the names of your files, may be included — edit that out, too, but don’t remove the context.
    Step 2
    Do the same with the search string "mds".

  • Can't sync new songs to iPod after hard drive replacement.

    A few months ago, I had my hard drive replaced on my Windows Vista laptop. So I backed up all my files including iTunes to an external drive. When the new hard drive was installed I restored the iTunes library back. Yesterday was the first time since the restore that I purchased new music from the iTunes store. I bought 6 new songs. I can see the new songs in the iTunes library but when I sync the iPod the new songs do not transfer over to the iPod. Any ideas on how I can fix this problem? Thanks.

    I found the link below and it worked. I added the songs manually.
    http://support.apple.com/kb/ht1351
    All set now.

  • Photoshop Elements 11 hard drive space system requirement?

    I have a macbook pro with 4gb of memory in the hard-drive. I wanted to get photoshop elements 11 but the system requirements includes 4gb of hard-drive. Because some of my memory has been used up, does that mean I can not install photoshop elements 11 in my computer?

    NPar1234 wrote:
    I have a macbook pro with 4gb of memory in the hard-drive. I wanted to get photoshop elements 11 but the system requirements includes 4gb of hard-drive. Because some of my memory has been used up, does that mean I can not install photoshop elements 11 in my computer?
    Just to get the terminology clear: you're not mixing RAM specs with hard drive space, are you?
    Photoshop Elements 11 requires 1 GB of RAM and 4GB of hard drive space
    http://helpx.adobe.com/photoshop-elements/release-note/photoshop-elements-11-release-notes .html#main-pars_header_0
    MacBook Pros come with 8GB of system RAM. Older models had 4GB of RAM. Plenty for PSE11 or PSE12.
    http://www.apple.com/macbook-pro/specs-retina/
    Hard drives are usually are 128GB or 256GB or 512GB or higher. Again, plenty for PSE11 or PSE12.
    What are the exact specs (RAM and hard drive storage) of your MacBook Pro and how much hard drive space do you have free?
    Plus, bear in mind that Photoshop Elements 12 was released in late September and is now the current version. Adobe no longer sells PSE 11.

  • How do I recover files from an internal hard drive that is no longer recognized?

    Hi there,
    Any help on this problem is greatly appreciated!  I have a MacBook Pro (late 2009) running Snow Leopard.  Over the last few years, after having brought the computer in to get checked, it seems that the RAM cards have gotten loose (or the bottom cover of the computer gets loose) and occasionally a grey curtain will come down from the top of the screen and everything stops working.  Restarting the computer is often fine but sometimes it can't be restarted and I have to take the cover off, reset the RAM cards in their slots, and retighten the cover.  The computer usually works fine after that, but verifying the disk using Disk Utility will sometimes indicate there is an error and the disk needs to be repaired.  Repairing it in Disk Utility is usually fine.
    Last year this happened but the disk could not be repaired. The operating system could still be run, and after making a backup of all my files I reinstalled the operating system from the installation DVD, which didn't delete any of my files on the hard drive anyway.
    A few days ago the same grey curtain issue happened, however upon resetting the RAM and back cover and restarting the computer, the apple logo appeared which was quickly replaced by a prohibitory sign, which stayed on the screen indefinitely.  After putting in the installation DVD and trying to reinstall the operating system, when the option comes up to choose which disk to install OS X on, the internal hard drive does not appear as an option.  Going to Disk Utility from the DVD, the internal hard drive appears on the left but the text is greyed out.  Attempting to repair the disk gives the following error message:
    Checking Journaled HFS Plus volume.
    Invalid key length
    Invalid record count
    Catalog file entry not found for extent
    The volume    could not be verified completely.
    Error: Disk Utility can't repair this disk. Back up as many of your files as possible, reformat the disk, and restore your backed-up files.
    While I know I could completely erase and reformat the disk, I really don't want to lose any of my files (ideally).  If I erase the disk but select "Don't Erase Data" from the "Security Options..." in the "Erase" tab in Disk Utility, will this keep all my files in tact and will I be able to access them later?  Are there third party applications that can recover my files so I can make a back up before I delete and reformat the hard drive?  I am currently running the computer through an external hard drive connected by USB, but the internal hard drive still doesn't show up in Finder (only in Disk Utility as greyed out text).
    Can I recover my files?
    Thanks so much!

    Try using a data recovery product such as the ones listed here. Don't erase the drive or write anything else to it until the files are recovered or you choose not to recover them.
    (117246)

  • Reinstall Photoshop 11 after hard drive failure & replacement

    Suffered a hard drive failure last week and lost everything. I need to reinstall Photoshop Elements 11.

    Download the trial from http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l
    Follow the Very Important Instructions on that page first BEFORE you click the download links.
    Enter your serial number to license the software on your computer.

  • How do I reinstall my operating system after hard drive upgrade on MacBook pro?  I have Snow Leopard install disc

    How do I reinstall my operating system (Snow Leopard) after a hard drive upgrade. I did a Time Machine backup before the new hard drive was installed. I put in the Snow Leopard install disc and don't get the icon I'm supposed to double click to install Snow Leopard and then the backup.
    HELP PLEASE!!

    Is the new HHD in the MBP?
    Is the new HDD formatted Mac OS Extended (Journaled)?
    Where is the old HDD? In an enclosure?  What is on the old HDD, your user data?  Is the Snow Leopard System on it?
    Do you have a separate Time Machine Disk with your user data?
    Answers to these questions should give an exact status of your situation so that one can proceed in the right direction.
    Ciao.

  • How to import recovered files from an external hard drive

    My hard drive crashed. I got a new one and of course lost my itunes.  I had the recovered data put on an external hard drive.  How do I re import my data back into Itunes?

    Hello David,
    Thank you for using Apple Support Communities!
    If you have the entire iTunes library folder on that recovered drive, you can copy it to your new computer and use this article to choose that iTunes library that you just copied to the new computer.
    iTunes: How to open an alternate iTunes Library file or create a new one
    http://support.apple.com/kb/HT1589
    Otherwise, you would need to use the Add File to Library function.
    Adding music and other content to iTunes
    http://support.apple.com/kb/HT1473
    Regards,
    Sterling

  • How to find and import prior bookmarks, after hard drive crashed and new program is installed?

    After having a crash, my hard drive data was saved in a backup file but I need help in finding and bringing the saved bookmark file(s) into the newly installed program.

    https://support.mozilla.com/en-US/kb/Recovering+important+data+from+an+old+profile
    Your old Profile is located here in Win XP and W2K: <br />
    ''drive'':\Documents and Settings\''Windows login user name''\Application Data\Mozilla\Firefox\Profiles\''profile_name''

  • How to re-download Ps and Lr after hard drive is replaced

    I have license for CC on two computers.   Had it installed on my PC and Mac.   Hard drive for the Mac was replaced.  How do I re-download my products?

    Download/install the trial versions, then activate them with your Adobe ID.

Maybe you are looking for

  • IMac (Mid 2011) Constantly Crashing

    Hi Everyone! I have a mid 2011 iMac and (27 inch, 2.7 i5, 4gb RAM) and it has started crashing regularly on start up/wake and (recently) when I open apps. I don't think it is app specific. I've tried reinstalling OSX, I've scanned the entire system f

  • JDev deletes empty elements in transform activity

    Dear all, the XSD in my BPEL process defines a "Group" element: <xs:element name="Groups"> <xs:complexType> <xs:sequence> <xs:element name="Group" type="Group_Type" maxOccurs="unbounded"/> </xs:sequence> </xs:complexType> </xs:element> <xs:complexTyp

  • My iPhoto 6 thinks my external drive is a camera!

    Everytime I boot my iPhoto starts because it thinks its a memorycard or a camera... the funny thing is that if I close and restart iPhoto it's not there it says it's nothing to import, but it still pops up after every newboot. BTW: There was a movie

  • Bug with Network Load Balancing Services and SkipAsSource always reverting to true

    Steps to reproduce: Add an IP address to the cluster (2 nodes running Windows Server 2012) using the Network Load Balancing Manager Using PowerShell set the SkipAsSource flag on the IP Address to true (Set-NetIpAddress -IpAddress 192.168.1.10 -SkipAs

  • Embeding video in WAP site with Quicktime but how to meaure hits on it

    Hey All, I embedded the quicktime video object in WAP site but I want o know how can I measure hits or downloads on this video.Can i call java script and it does the necessary, is somebody dealt with such thing previously please help or suggest me th