How do I reduce camera shake in Premier Elements 10?

How do I reduce camera shake in Premier Elements 10? Thank-You

You will find best advice over on the video forum. Most of us here are photographers.
Click on the link below and copy and paste your question again. Good luck.
Video questions: Click here for Premiere Elements Forum

Similar Messages

Photoshop Help | Reduce camera shake blurring | Photoshop CC

This question was posted in response to the following article: http://helpx.adobe.com/photoshop/using/reduce-camera-shake-induced-blurring.html

Could you please tell me where shake reduction is in Photoshop CS6 as it is not under Filter >Sharpen

How do I create reusable titles in premier elements 13?

how do I create reusable titles in premier elements 13?

thomas
Premiere Elements 13/13.1 Expert workspace
After you create your title in the Titler, close the Titler.
The tilte file will have been automatically placed on the Timeline at the position of the Timeline Indicator.
Open Project Assets, and select the thumbnail for the title file that was placed there also automatically.
With the Project Assets title thumbnail selected, go to File Menu/Export/Title in order to export your title as a prtl file saved to the computer hard drive for future use. This principle also applied to Title Templates edited in the Titler.
Please let me know if you are OK with the details. Please ask if you need clarification on the above.
Thank you.
ATR

How do I know which version of Premier Elements 13 to choose for installation ... 64 Bit Installer (64.exe) OR 64 Bit Installer Package (64.7z)? Thank you

How do I know which version of Premier Elements 13 to choose for installation ... 64 Bit Installer (64.exe) OR 64 Bit Installer Package (64.7z)? Thank you

You can download the trial version of the software thru the page linked below and then use your current serial number to activate it.
Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site and have cookies enabled in your browser or else the download will not work properly.
Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

Offline unlock key--how do I get one for a Premier Elements 13 component?

Offline unlock key--how do I get one for a Premier Elements 13 component?

K, Again thanx, that is exactly what I've done and it does not work. I cannot get an unlock key using the SN provided by the offline PC, and then pasting it into http://www.adobe.com/go/premiereel_encoder per instructions on screen and now even by telecom from Adobe. Bob
Adobe - Error pageEurope, Middle East and Africa
View on www.adobe.com
Preview by Yahoo

How do I open projects created using Premier Elements 8 with Premier Elements 13

how do I open projects created using Premier Elements 8 with Premier Elements 13

ATR
The DVD Creator.dll file was in the proper location but I could not find a Run As Administrator Option.
I did delete Prefs file and try again to open the app then the project and received the same problem. And the scratch disks were all directed to the Elements 13 path
Yesterday I did try additional solutions
Removed the Elements 13 App vis the Control Panel, copy the original downloaded .zip File to the Desktop and reload the entire application with no success solving the problem
In addition to that I contacted a site called Rescue.com? and the guy told me that he was a representative of Adobe, which I was not sure was the truth. He looked at my system and told me that Premier 13 was not compatible with Windows 7. I called BS on him told him that Adobe site said it was compatible and he told me I had a Trojan on my system and he would refund my money for Elements 13 and sell me version 12, which would be compatible, along with a better security system than the Norton 360 I told him I had. At that point I immediately terminated our communications and called Norton to have additional checks performed to ensure no additions were added to my system. They had me download and run Power Eraser from them and it found nothing wrong.
I also temporarily turned off the firewall and tried to use the Elements 13 but had no success.
I also went to Microsoft Windows site and searched for the Exception code: 0xc0000005 that was displayed in the event viewer and they indicated there was a hotfix available and they would email me that fix. ave not received the email yet.
I’m getting very frustrated but thank you for your help. I will update you with and additional results or actions I get or perform.
GDBMB

How to import a jpeg image into premier elements 12?

how do i import a jpeg image into premier elements 12?

chuckx
Just for background information, what computer operating system is your Premiere Elements 12 running on?
The generalized answer is Add Media/Files and Folders/Projects Assets from where you drag the photo to the Expert view Timeline.
But all that can generate a mountain of questions about the photo and the project into which it will be going
a. what are the pixel dimensions of the photo - will or will I not have to resize or crop/resize the photo for the project
b. is the photo going into a project that will consist of photos and videos
c. if video inclusion, that leads to questions about the properties of the video so that you can set the project preset to match those
d. that leads to questions on the best size to have your photo before you import them into this project.
So, one simple question generates a lot of side questions.
Please let us know how we might help to sort out the details for your Premiere Elements workflow and its source media.
Thank you.
ATr

How do I reduce the size of all elements in a Motion project proportionately and simultaneously?

I have created a complex Motion project with many elements. Does anyone know how to reduce the size of all elements proportionately and simultaneously in order to shrink this down to a corner logo? Thanks

Sure.
In the Layers pane, IF all of your layers are already in a single Group (if you're really a beginner, then you probably just have the one group), all you need to do is select the Group "layer" containing your design elements and clone it (type - k) -- you'll get a new layer in a new group if it's a top level group of the project called Clone Layer. (If you have more than one group, select all of them --- however, if there is an FCPX Placeholder-drop-zone-looking-layer with a label like Effect Source or Title Background, don't select that -- you'll need to command-click select just the layers that make up your logo design). [You can alternately select *everything* and command click the layers you do not want to include in the Clone.]
Creating a clone of anything in no way changes that object or objects. A clone is like a composite viewer for objects/layers -- like a tv screen is to broadcast signals...
Uncheck the Cloned Group (or selected objects - if still selected, unchecking one will uncheck all of the selected layers) to inactivate it (this will not affect the clone visibility.)
Select the Clone Layer.
Use the Properties > Transform tools to scale and position the clone layer (changing the blend mode to something like hard light, overlay or similar, and adjusting the opacity makes for a nice "watermark" [corner logo]).
HTH (hope it's clear enough!)

How do I fix choppy video? Premier Elements 12 plays DV fine, but mp4 edits poorly.

When I load video from my old DVC camcorder it plays smoothly during editing. When I load mp4 video from my drone camera, it is choppy. People using Premier Pro suggested changing the monitor resolution to 1/2 or 1/8, but I don't see that feature in Premier Elements 12.

Thanks, Hunt.
I checked out the source files and they don't match the Sequence Settings. My current project won't let me change the settings; is there a way to copy the entire old sequence into a new sequence with the correct settings without losing anything?

How to bring up camera raw in photoshop elements 13

How to use camera raw in photo shop elements 13. I see it's not available like in Photoshop cc. What to do?

It would be best to ask here:
Photoshop Elements

How do I reduce the width of UIPicker element

I am using a UIPicker in my app but my app is in landscape mode and am not able to reduce the width and height of the UIPicker. Can anyone let me know the solution.

What webmail site has this problem (e.g., Outlook, Yahoo, Gmail)? A volunteer with an account on the site could take a look.

How to export to mp4 in adobe premier elements 10

having trouble choosing mp4 as export format

davidcross0345
What computer operating system is your Premiere Elements 10 running on and does that computer use a NVIDIA GeForce video card/graphics card? Please read the Announcement at the top of this forum regarding the serious display Premiere Elements 10/NVIDIA Ge Force issue. The full description of the problem and the how to fix are there...the solution is rolling back the driver version to May 2013. This may not be possible if your computer operating system is Windows 8 or 8.1 64 bit. If that matter does not apply to you, then please read on.
Do you know the export routes for .mp4 exports and are having problems getting the export to go to a successful conclusion, or is it that you do not know the export routes for a file with a ..mp4 file extension. If problems in getting the export to go to completion, then please give full details of your export settings, source media, project settings.
Remember, .mp4 is just a file extension (wrapper format for the file's video and audio compression). So, depending on your requirements, you may have to consider video and audio compression as well as file extension in your decisions.
As for the routes...
1. Share/Computer/AVCHD and one of the .mp4 preset choices
2. Share/Mobile Phones and Players/Apple iPod, iPad, and iPhone/ and one of the Presets choices
If you need help with the settings, please give us more details of your project, and we will post suggested settings.
We will be watching for your follow up in the morning.
Thanks.
ATR

How do I reset General Preferences in Premier Elements 12?

Having used Premiere Elements 10 for a while, I now have Premiere Elements 12 on my PC, I like to set the duration for still images to 5 secs, not the default 6. I made a mistake when doing this by altering the Video Transition Default Duration in error, realised my mistake and reset that at 30 frames (is that correct for PAL?) I then altered the Still Image duration from 150 to 125, although it is showing at 150 when I access General Preferences. When I import a still image in, it says 5.00 sec under image in Project Assets but when added to the project all the images say duration 5.01 secs. I have no idea what I've done wrong and why 5.01 secs seems to be the duration.
Please could anyone tell me how to reset the General Preferences back to default settings, if this can't be done, what should I have all the General Preference settings at for PAL?
Many thanks in advance for your help.

DSgal
Same thing in Premiere Elements 10 and 12.
If you have a PAL project, when you open Edit Menu/Preferences/General, you will see defaults
Video Transition Default Duration = 30 frames
In the PAL project 25 frames/second, those 30 frames are equivalent to 1.20 seconds.
Audio Transition Default Duration = 1.00 seconds
In the PAL project 25 frames/second, 1.00 second is equivalent to 25 frames
(frames vs samples for audio is another story for another time)
Still Image Default Duration = 150 frames
In the PAL project 25 frames/second, so those 150 frames are equivalent to 6.00 seconds.
The above defaults will apply to all the stills that are imported AFTER the sets are made.
If you want to change the Still Image Default Duration for the project from 6.00 to 5.00 seconds, then BEFORE Still import you change
150 frames to 125 frames. That gives 5.00, not 5.01 seconds.
Examples
6.00 second duration = 150 frames
5.00 second duration = 125 frames
4.00 second duration = 100 frames
3.00 second duration = 75 frames
2.00 second duration = 50 frames
1.00 second duration = 25 frames
Again, these settings are done BEFORE and not after Still import.
If you are in the project with your Stills already on the Timeline with the Still Image Default Duration of 150 frames (6.00 seconds) as defined in preferences and you decide to change the duration of the Still from 6.00 seconds to 5.00 seconds, then you right click the still, select Time Stretch, and set the Time Stretch dialog to 5.00 seconds.
Example in Time Stretch dialog....from 00;00;06;00 to 00;00;05;00 (hours;minutes;seconds;frames).
This can be done for one Timeline Still or more than one Timeline Still at a time.
Please review and consider and then let us know if you are OK with the details.
Thank you.
ATR

How do I get Encoder Activation for Premier Elements 3.0?

I upgraded to Windows 7 on the same computer and now Adobe wants to rob me for an upgrade in order to activate the same software I've been using.

M@rch15
There have been several recent threads where the user is trying to install Premiere Elements 3.0/3.0.2 on Windows 7 64 bit and has been running into MPEG2 Activation message. When the user follows the message to get the MPEG2 Activation, the end message says that the MPEG2 Activation is no longer supported by Adobe and your version. Is that the situation that you are in?
The MPEG2 Activation is one of those first time use/one time only activations that should go on behind the scenes when you have an active Internet connection. Is that the message that you are getting, and do you have a working Internet connection?
The following has worked for a few
1. If the program is installed in Control Panel/Programs, then uninstall it the usual way.
2. Do a free ccleaner run through (regular cleaner and registry cleaner) to get rid of leftovers from incomplete uninstalls/reinstalls
CCleaner - Download
3. Install Premiere Elements 3.0 with antivirus and firewall(s) disabled
4. Once Premiere Elements 3.0 is installed, then install the 3.0.2 Update with the antivirus and firewall(s) disabled.
Adobe - Premiere Elements : For Windows : Adobe Premiere Elements 3.0.2 update
Any questions, please do not hesitate to ask.
Thank you.
ATR
Add On...You may want to include 5. Right click the Premiere Elements 3.0 desktop icon and select and apply Run As Administrator.

How to angle a picture in Adobe Premier Elements

I am trying to angle a picture and or videos in this but for some reason there is no option to. This should be a default option if its not in this. Smaller editors than this one can do it. If there is a way to add angle to the media please tell me. Other wise I will ensure that Adobe either updates it so it is possible or refund me for their impatience on this feature.

timburrell
Premiere Elements 10 on what computer operating system?
You should be able to right click the still on the Timeline, select Time Stretch, and then set the 5 (default) to 2 seconds.
From 00;00;05;00
To 00;00;02;00
(hours;minutes;seconds;frames)
You should be able to do this for more than one still at a Time by selecting all the clips to be involved before the Time Stretch duration set.
If you want all your 2 seconds stills for all your still imports then, before import, make sure that Edit Menu/Preferences/General and Still Image Default Duration is set to 60 frames instead of 150 frames (for a 30 frames per second system).
Please let us know if you are OK with the above information. If not, please supply more details or ask for clarification for any area of uncertainty.
Thank you.
ATR

How do I reduce camera shake in Premier Elements 10?

Similar Messages

Maybe you are looking for