How do I reenter the set up mode in os 6 install?
I got all the way through the os 6 install process, and began the set up process on the iphone itself. It prompted me to select a wifi network, which I did, but it kept timing out. I figured out that it wasn't connecting because with this particular network, you must first enter a password on a webpage to gain access. I couldn't really back out, so I selected "skip this step". A message came up saying that if I do, it wouldn't fully configure iCloud stuff, mail, messaging, etc. I had to select "skip anyway". Is there a way I can go back to this set up routine, and rerun it, so I can select a different wifi network this time? How do I make it do the set up prompts again without going through the whole install process again?
Thanks, Dave
There are some methods to do that, but the most classic is to mute the volume before turning off your computer, so the startup sound won't appear.
If you don't want to mute the sound, another option is StartNinja > http://www.allvu.com/index.php/products/startninja.html
Similar Messages
-
My beautiful teens tried to decode my iphone and got me up to 22,000 minutes to reset my old iphone that i now use as a radio to listen to pandora music. how can i reset the setting and bypass the disabled msg
If you want to Restore iPhone Firmware. Open iTunes on computer. Connect iPhone to computer with USB Cable. Then hold both home and power buttons until iTunes recognizes iPhone in Recovery Mode. This usually takes about 20 seconds of holding both buttons. Then click Restore button of iTunes.
-
How can i change the setting on my ipad 2? Whenever i read stories in the net after awhile it goeson standby and i have to keep on entering the passcode. Please help.
Settings>General>AutoLock>Never. Now it will not sleep at all so change it back when you are done reading.
-
I accidentally agreed to set up my work laptop icloud account to merge with my other devices and want to keep the work information separate. How can I change the setting for the PC at work?
Sign out of iCloud.
-
I made a big mistake to change the setting of my Mac book pro to "me only". Now ofcourse It cannot open the login page, for how would the mac know it is me? How can I change the setting back to "everyone"? I have back up in the past but the last month I have not. I really want to keep the data.
So how can I go in and change the setting, It stays ofcourse at the apple screen with wheel. All info is there and the computer works fine, just cannot use it or have been able to log in.wjosten is spot on. If you really want iCloud, then you will need to acquire a new or second hand MBP that can run Lion.
Ciao. -
How can I change the setting to one appropriate to java1.2
Hello.
I am using WebLogic 4.5.1 .
and recently started to use JDK 1.2 instead of JDK 1.1.7.
So, I set [start]-[weblogic]-[Choose1.2JRE] in environment.
and then, if I execute T3Server, the message of
"javai.dll class path cannot be found " is displayed and the server is not
loaded.
However, javai.dll was in java1.1.X\bin.
I can assume that a setting is to java1.1.X.
--> How can I change the setting to one appropriate to java 1.2
It's my environment
ClassPath
.;c:\weblogic\classes;C:\weblogic\lib\weblogicaux.jar;C:\weblogic\license;c:
\weblogic;C:\weblogic\myserver\clientclasses;C:\weblogic\myserver\serverclas
ses;C:\weblogic\myserver\servletclasses;C:\weblogic\mssqlserver4\classes;c:\
weblogic\classes\boot;C:\weblogic\eval\cloudscape\lib\cloudscape.jar;c:\rmi-
iiop\lib\iioprt11.jar;c:\rmi-iiop\lib\iioprt.jar;c:\rmi-iiop\lib\rmiorb.jar;
C:\jsdk2.1\runner.jar;C:\jsdk2.1\servlet.jar
Path :
%SystemRoot%\system32;C:\jdk1.3bin;c:\weblogic;c:\weblogic\bin;
c:\;c:\bat;c:\util\;C:\jsdk2.0\bin
Hyung Gi Min -
Question about email setting: how do i change the setting so i need to login to check my email. Currently it automatically come to the inbox without the need to log in.
You don't. Email comes in either by push or when you invoke the email app. Ther is no password except when you first set up the account. If your iPad is not being used as your personal device and you need to shield emails from other users, then don't use the email app. Instead, use web mail if available from your provider.
-
How can I change the frame rate mode?
Adobe Premiere Pro exports my videos with a variable frame rate. Because of this long videos are asynchronous. How can i change the frame rate mode? So Adobe Premie Pro exports my videos with a CONSTANT frame rate? The original video has a constant frame rate...
Sorry my mistakes. I am from Germany.. so...I mean with asynchronous that the video file and the sound file are displaced. In the beginning of the Video it's normal, but if the videos is very long it goes VERY "asynchronous"
I analyzed the video with "mediainfo":
General
Format : MPEG-4
Format profile : Base Media / Version 2
Codec ID : mp42
File size : 2.00 GiB
Duration : 20mn 13s
Overall bit rate mode : Variable
Overall bit rate : 14.2 Mbps
Encoded date : UTC 2013-12-11 13:56:13
Tagged date : UTC 2013-12-11 13:58:30
©TIM : 00:00:00:00
©TSC : 30
©TSZ : 1
Video
ID : 1
Format : AVC
Format/Info : Advanced Video Codec
Format profile : [email protected]
Format settings, CABAC : Yes
Format settings, ReFrames : 3 frames
Format settings, GOP : M=3, N=30
Codec ID : avc1
Codec ID/Info : Advanced Video Coding
Duration : 20mn 13s
Source duration : 20mn 13s
Bit rate : 14.0 Mbps
Width : 2 560 pixels
Height : 1 440 pixels
Display aspect ratio : 16:9
Frame rate mode : Variable
Frame rate : 30.000 fps
Minimum frame rate : 30.000 fps
Maximum frame rate : 30.030 fps
Standard : PAL
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.127
Stream size : 1.98 GiB (99%)
Source stream size : 1.98 GiB (99%)
Language : English
Encoded date : UTC 2013-12-11 13:56:13
Tagged date : UTC 2013-12-11 13:56:13
Color primaries : BT.709
Transfer characteristics : BT.709
Matrix coefficients : BT.709
mdhd_Duration : 1213733
Audio
ID : 2
Format : AAC
Format/Info : Advanced Audio Codec
Format profile : LC
Codec ID : 40
Duration : 20mn 13s
Source duration : 20mn 13s
Bit rate mode : Variable
Bit rate : 158 Kbps
Maximum bit rate : 254 Kbps
Channel(s) : 2 channels
Channel positions : Front: L R
Sampling rate : 44.1 KHz
Compression mode : Lossy
Stream size : 22.8 MiB (1%)
Source stream size : 22.8 MiB (1%)
Language : English
Encoded date : UTC 2013-12-11 13:56:13
Tagged date : UTC 2013-12-11 13:56:13
mdhd_Duration : 1213777
And there i can read that the "frame rate mode" is variable... and that's the bad thing... I want to change that point to a constant frame rate mode. I use the H.264 codec -
Files that used to be visible are now hidden in Mavericks 10.9.1. How can I change the setting to view the same files as before? I do not need the hidden files that are typically invisible.
I am having trouble locating such files as PDF's INDD, AI etc. When I view all hidden files and try to open it in the program..it looks like it is really not on the drive. Has anyone come across a solution?You may need to rebuild permissions on your user account. To do this,boot to your Recovery partition (holding down the Command and R keys while booting) and open Terminal from the Utilities menu. In Terminal, type: ‘resetpassword’ (without the ’s), hit return, and select the admin user. You are not going to reset your password. Click on the icon for your Macs hard drive at the top. From the drop down below it select the user account which is having issues. At the bottom of the window, you'll see an area labeled Restore Home Directory Permissions and ACLs. Click the reset button there. The process takes a few minutes. When complete, restart.
Repair User Permissions -
How can I deploy the setting of clear cache on exit for all users?
How can I deploy the setting of clear cache on exit for all users?
Note that Firefox disables the disk cache if you use "Clear history when Firefox closes" to clear the cache (see about:cache), so you can either disable the disk cache via its related pref or set the prefs related to clearing this data,but then other items that have a check-mark by default are cleared as well.
*browser.cache.disk.enable
*privacy.clearOnShutdown.cache
*privacy.sanitize.sanitizeOnShutdown
You can use a mozilla.cfg file in the Firefox program folder to lock prefs or specify new (default) values.
Place a local-settings.js file in the defaults\pref folder where also the channel-prefs.js file is located to specify using mozilla.cfg.
pref("general.config.filename", "mozilla.cfg");
These functions can be used in the mozilla.cfg file:
defaultPref(); // set new default value
pref(); // set pref, but allow changes in current session
lockPref(); // lock pref, disallow changes
See also:
*http://kb.mozillazine.org/Locking_preferences
*http://mike.kaply.com/2012/03/16/customizing-firefox-autoconfig-files/
*http://mike.kaply.com/2014/01/08/can-firefox-do-this/ -
How can I disable the setting "Needs password" in the mediathek settings?
How can I disable the setting "Needs password" in the mediathek settings for "Share my mediathek in my local network"? I unchecked it, but as soon as I opened itunes again, it was checked again. It was no problem unchecking the corresponding box with my laptop. This is important for me because otherwise I cannot watch my mediathek-content with Apple TV. Thank you for your help. Regards Klaus Hausmann
I am afraid you will just have to ignore it.
-
How can i rerun the set up assistant?
How can i rerun the set up assistant?
See the 'seond chance' option here - http://www.pondini.org/OSX/SetupLion.html.
Good luck,
Clinton -
How do you change the setting to view the iPhone Horizontally? It is locked in the vertical setting. Thanks
Orientation lock is covered in the manual.
Click Support at the top of this page, then click Manuals -
How do I finalize the set up of my Adobe Reader? My bank tells me it is not done.
How do I finalize the set up of my Adobe Reader? My bank tells me it is not done.
Can we assume you have installed it?
What exactly are you trying to do and what happens when you try to do it? What exactly did the bank tell you? -
Firefox keeps my history for too long. how can i change the setting to 2 weeks
<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/903677]]</blockquote>
firefox keeps my history for too long. how can i change the setting to 2 weeksDo you mean you have a Macbook Pro (laptop) versus a Mac Pro (desktop)?
You can back up the MBP, restart using Command+R to boot into the Mavericks Recovery HD, erase the Mactintosh HD and Reinstall OS X. Then you can go through setup and configure it with your information and Apple ID. Mavericks should not prompt you for an Apple ID when it goes through the install since that OS is free.
One thing you might want to consider is asking the previous owner to unregister the MBP from his Apple ID if he previously registered it. Then you can register it under your Apple ID.
The previous owner should have wiped it clean and reinstalled the OS that came pre-installed before selling it.
Maybe you are looking for
-
Not able to create connection or reset the password in Discoverer Plus
I keep encountering errors when I try to create a connection or change my password. Below are the error I get. During Change of Password: "An invalid connection key was specified. Please correct the connection key and try again." During Creating Conn
-
Hi, One of the vendor in my company code has open item and invoice was created last month and we have closed that period. One of the user here wants to reverse the open item doc using FB08 but she is getting an error posting period not open. Could an
-
I want to have the jingle in the new ads as my ringtone?
How do I do this or is it availinle to buy ? Thanks
-
Syntax error when adding variables in recordset (query)
MySql,PHP,Dreamweaver,WindowsVista Hi I am receiving a syntax error: invalid quantifier ++ $orderNum;s*?> when adding two variables in the recordset (query) dialog box. I get the error when clicking OK. Here is what is entered: name: fieldname type:
-
How to connect oracle and c# using namespace System.Data.OracleClient
Hi! I am using Microsoft Visual Studio 2005 and Orange for oracle version 4. I've been given a task, show the table of the database using datagrid. but first I have to connect to the database using namespace System.Data.OracleClient. What should I do