How do I reformat a external drive to read MAC and windows

I purchased a WD external drive and found that someone had returned it to the store with info on it. I have switched from a windows PC to a MacBook Pro. I would like to transfer some info from a old external to the new one but I need to reformat the new one to clear the info already on it. Also I was told that I could reformat a external so that my Mac could read both Mac and Windows info.

errollflynn2000 wrote:
I was told that I could reformat a external so that my Mac could read both Mac and Windows info.
Aside of using crappy FAT32 with its 4GB limitation or the not really better ExFAT, there are two alternative ways:
Enable your Mac to "understand" Windows NTFS.
There also at least two ways. MacFuse/ntfs-3g for the more experienced user ( http://macntfs-3g.blogspot.com/ ) or Pargon's NTFS for Mac ( http://www.paragon-software.com ) for the not so experienced.
Enable your Windows machine to "understand" Mac's HFS+ filesystem. on a similar way.
Lupunus

Similar Messages

  • How can I interchange a Toshiba external drive with my Mac and Windows? It only works read only with the Mac.

    I bought a Toshiba external drive IT and I can copy files to it from my Macbook Pro 5,3. I would like to know how canI interchange files with Windows and the Mac.

    If the disk is read only, it is formatted for Windows and the Mac can't write to it
    Reformat to FAT32
    This will of course wipe all data so move it first
    Allan

  • How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?

    How do I extract 1 page of a pdf file? How do I send that as a original for mac and windows users?

    This is not really a Numbers question.  I will provide an answer but suggest you make the question relavent for the forum where you post.
    1) Open the PDF in Preview
    2) select the menu item "View > Thumbnails"
    3) select the page you wnt to share
    4) copy (by using the key combination <command> + c OR select the menu item "Edit > Copy"
    5) select the menu item "File >  New From Clipboard"
    6) save as a new name
    7) share the new file

  • TS1550 OSX Upgrade (Mountain Lion) turned external drive to "read-only" and now I can not do back-ups on time machine.  How do I fix this?

    I recently upgraded to mountain lion, latest version OS and now my external drives are read-only.  They are formatted Mac OS Extended and I have been using one of them for Time Machine.  How do I fix?
    Thanks

    http://pondini.org/TM/C6.html

  • External Hard Drive Compatible with Mac and Windows?

    So my old laptop is a Dell Latitude and I bought a Western Digital external hard drive and put all my files/pics/music on it. The information the WD came with said its compatible with Mac and Windows, but when I plug it into my brand spankin new Macbook, it doesn't register with the computer and won't show up. What's going on?
    Message was edited by: philliesphan

    I recently ran into that problem. In order to have the hard drive compatible for both PC and Mac it must be in a FAT32 format. In order to do this though all your files will be deleted (in order to reformat). You can do this by plugging in the hard drive into you mac and going under disk utility and there you will find your hard drive and under erase change the format to FAT32 and then you press erase (all will be deleted off the external drive though)

  • How to increase Boot Camp partition without harming both Mac and Windows partition

    Hello Apple Support Communities.
    I have made a Boot Camp partition with my Mac partition, but the problem is that I am running out of space on my Windows partition. (Darn you, Steam Summer Sale! )
    Anyways, is there any way to increase the space on my Windows partition without harming both Mac and Windows partitions. I would prefer if I didn't need to delete the Windows Partition and do everything all over again, as I need to download and set up everything all over again. I also know that changing the Windows partition is a tricky and hard thing, and one step can harm my whole computer, but I think that it is worth the risk.
    I really don't care how to do it, anything, from a bootable program, to anything. I just want to know how to do it.
    So is there any way that I can increase the Windows partition of my Mac without harming both Mac and Windows partitions? Thanks.

    This cannot be done using Boot Camp Assistant. But, you can try using Paragon Camptune X for Mac® – How it works.

  • How do I reformat my external drive for Time Machine?

    I think I might have messed up My Passport (external hard drive) when I disconnected my iMac to take it to the Apple Store to have the screen repaired (was replaced).  I turned Time Machine off before I disconnected the external hard drive but didn't eject it.  I reconnected everything Monday morning and it was backing up fine until this afternoon but suddenly stopped and gave me warning messages about it not being able to back up.  The message directed me to Repair Disk which I tried but that didn't work.  and I was "told" to reformat the drive.  But when I reconnect it to my mac, the mac doesn't recognize that its there.  I don't know if its worth trying to fix, or if I should just get a new one.  (I have an on line back up service so all my data is safe and backed up elsewhere).  I've only had the drive for maybe 6 mts, or a little longer and I know it was far from full.  I have Time Machine turned off now and the drive disconnected .  Is it worth repairing.  If there is something wrong with it a new one might make more sense.  I hope I have explained this okay.   Thanks for any suggestions.  It is a Western Digital external drive.
    laverne's mom

    WD drives are not all that reliable according to some reports going around.
    And BUS powered drives are not good choices for backups if it's drawing too much current, Apple can cut if off in a update, use self powered drives instead.
    You can use the drive, but as a transport drive, not as a vital backup.
    TM drive isn't quite as good as a backup as it could be, and online storage is slow to upload and can be compromised or lost (it's happened before) so you should diversify more with clones and storage drives in addition to TM drives.
    Read my backup, bootable clones, troubleshooting, performance, wifi security and restore info/advice here
    https://discussions.apple.com/message/16276201#16276201

  • How do I manipulate & share pictures from an external drive on my Mac and PC using iPhoto?

    I recently got an imac, and I am new to the the mac world but decided I loved my iphone how bad could a mac be?  My husband and I each have our computer he has a PC & I have a mac and a PC laptop.  We bought an external hardrive to dump all my many many pictures on it.  The idea is we will not save anything on our computers but instead work off of the hard drive that is automatically backed up.  Ok now that you know the back ground. 
    How can I view pictures from the external hardrive in iphoto with out haveing to make an iphoto library on my external hardrive.   I would not mind putting all my pictures in the iphoto library as long as I could view or manipulate the pictures from a PC, does anyone know if this is a possibility?  I have asked at the one to one sessions that I paid for but they can't help.  I guess it also hard for them to help when I can't very well be lugging my desk top in and out of the mac store for help.
    Any ideas I really like the iphoto tools and it could be very helpfull, but only if it doesn't limit me to always working from my computer.  I have great photo editing software on my laptop and want to be able to access the pictures from my laptp edit save and later view from my mac.
    Any ideas?  I found out how to make iphoto open the iphoto library on my external harddrive but I am asking for more.
    Please help  thanak you

    System Preferences - Sharing. If you cannot find System Preferences, then use Command - Spacebar and type System Preference and when you see it in Spotlight (uper right) hit return.

  • How to format a pc external drive with a mac

    Hello everyone! It's about a week I've bought a new imac. I used to have a pc. I have an WD external drive which was not compatible with macs, I am trying to format it using the disk utility and choosing Mac OS extended (journaled). When I am trying to erase it, I always get the following message: 'Disk erase failed with the error: couldn't unmount disk.   I really need your help people, because I'm new to macs and I have already spend hours googling on that...
    Thank you in advance for your response..
    My operating system is Mac OSC (10.7.3)

    It seems so ironic, but I have just found the answer to my question. I saw a movie which was stored in my WD hard drive yesterday and I hadn't quitted quick time. When I quitted quicktime I was able to erase the disc. I apologise for that people!!

  • Can i use time capsule as external hard drive for both mac and windows

    I have a mac book pro, ipad and iphone and ipod and a windows pc
    Can i use time capsule as a external hard disk only for all of the above ( including windows ) without the back up activity for mac ?

    You cannot access the TC from iOS devices without a browser. eg filebrowser.
    Can i use time capsule as a external hard disk only for all of the above ( including windows ) without the back up activity for mac ?
    Yes, with the following proviso.. the TC is not able to back itself up.. so if you store files on the TC without backups one day you will discover all your files are gone because of a hard drive failure of the TC. TM also cannot backup TC.. so you will need to buy a proper backup software.
    It is also much slower than a real NAS..
    And windows can be a bit painful.. especially windows 8.. other versions should work if you spend the time getting everything set right.

  • External hd using for Mac and Windows

    I'm using external free agent drive - seagate, My Mac can access and read and do anything with my drive but when I switch to other computer, it cant recognize my drive...What can I do now to fix it??? - I wanna share files from my drive to other computer as well. Besides, I dont wanna erase my drive to fix it...or if i have to, does anyone know how to back up my drive's data?

    How have you formatted the drive? if you format in FAT, or FAT32, both systems should be able to read it. The MAC side will put some hidden folders (proprietary to MAC, leave them alone), but other than that, you should be able to use on both systems.

  • FAT or exFAT for external hard disk for MAC and Windows

    Hello, could you tell me which format I have to format an external hard disk to use with Time Machine in order to recover data on MAC or Windows.
    Thank you very much for your answer.

    Like Kappy says, TimeMachine only works on Mac's and it formats the drive itself, then it's files are mosly a pain to get at via anything else but TimeMachine on a Mac.
    If you want something to backup the entire OS X side of the Mac and that can also be later accessed by a Windows PC (with MacDrive installed to read te HFS+ format), like if your not going to get another Mac again and want to get at your files, then you need a bootable clone drive.
    If you want something that backs up only your user files to a external exFAT drive, (to be read on Windows, Mac or Linux machine) then there is plenty of software to do that, one is free called SyncTwoFolders and it does that, it makes sure both folders are Synced in ethier or in one way directions.
    Most commonly used backup methods
    Drives, partitions, formatting w/Mac's + PC's

  • Hard Drive Compatible for Mac And Windows

    This is a strange problem, and I cannot find a solution.
    I just built a PC with a 300gb drive for just installing programs. I also bought a 500gb internal for storage of music, movies, pictures.
    I want the 500gb to be able to be accessed over the network by my Macbook. I know that I need to format the drive to FAT32 so it can be read by both my mac and my PC, but Windows XP does not give me an option to format it into FAT32.
    I have partition magic and it does not give me the FAT32 option either. What should I do. My goal is to use this drive as network storage and it will be my iTunes and iPhoto library for my macbook.
    Thanks for your help.
    Jake

    If you are going to access the drive over a network you can go ahead and format NTFS as the Mac will never access the drive directly. OS X supports the SMB protocol used by Windows XP for network access, so any Win XP format will work.

  • USB flash drive security on mac and windows

    Hi
    I've got an USB flash drive and I would like to secure it so that data on it will not be accessible unless a password is provided.
    The point is that I need to use it on both my macbook with tiger OS and on another PC with windows XP.
    The USB flash drive is a sandisk cruzer titanium that comes with U3. Originally I was using an U3 protection that asks for a password when the flash drive is plugged in.
    U3 is not supported by MAC so I had to disable the password protection to use it on my brand new macbook.
    Appreciate any help
    Thanks, Ste
    macbook c2d   Mac OS X (10.4.8)  

    You will be able to open it if you make it a .iso
    image. There is software available for both OSes to
    open and browse/modify a .iso image file. I do not
    know how well any of them use passwords for the
    images.
    Maybe it's winiso
    What I would recommend is using Winrar
    (http://www.rarlabs.com/) and just using a compresses
    and encrypted file that both OS's can manipulate.
    With winrar you create an archive and then each time you want to edit a file you have to extract it, modify it and then reinsert it in the archive.
    What I was looking for is something more user friendly.
    Images created with mac, protected with a password, are ok but are not compatible with windows.
    Viceversa, U3 is compatible with windows but not mac ...

  • How can i run AirPort Express for both a Mac and Windows 2000 SP2?

    I have my AirPort Express set up for my iMac and it runs fine. We have a house guest who has a laptop running Windows 2000 SP2. Can I set up Airport so that both computers can access internet wirelessly?

    Just did a quick check of the Unofficial Averatec Support Forum. Several posters there upgraded the driver for the wireless card to support WPA on the 5110.
    They used drivers from other computer manufacturers and indicated that Averatec has not provided updated drivers.
    They were running XP SP2.
    Many Averatec models have weak wifi cards. Mine included. Sorry I am unable to be of more help.
    Good luck
    susan
    iBook G4   Mac OS X (10.3.4)  

Maybe you are looking for

  • Error while running Project Creation BP in Unifier 10

    Hi Friends, Getting the error[/shell/action.xml:1748: Could not invoke method cloneProjectBP] while running Project Request BP. Regards Kedar

  • How to setup Facebook notifications on OS X Mountain Lion notification center?

    Hi! Well, I'm having a bit of a problem here on my OS. I had a Facebook account and I used to receive notifications in the OS Notification Center about comments, likes, messages, etc., as if I was at my iPhone or iPad. In the meanwhile I deleted that

  • Unable to change the scoring scale from 1-10 to 1-5

    Hi, We are using E-sourcing 5.1 We didn't see any options to change the scoring scale to 1-5. Note: For manual score question : system is asking us to score the scale 1-10 only but would like to have 1-5 instead of scoring scale 1-10. Kindly let me k

  • Systemd migration issue

    I'm having some serious issues migrating a machine to systemd.  The first error I had was with dbus refusing to start, apparently when I did my upgrade this morning it did not add the dbus user/group. I created the user and then dbus.service starts b

  • How to make values by the axis of charts hidden?

    Hi, VC has the ability to hide axis and the frame and etc. However the values by the side of the axis remains visible. Is there any visibility condition I could use to hide all the values? My end result would be only the line graph, without any figur