How do I "reformat" a nano 2nd gen?

My boyfriend just bought a new Classic - and we have decided to give my niece his nano 2nd gen. How do I remove all the songs off the nano so that the youngen can load her stuff - without having to wipe the library off BF's computer....

Restore your iPod. Just be aware that restoring will erase the iPod's hard drive, reload the software and put it back to default settings. Once the restore is complete follow the on screen instructions to name the iPod and automatically sync your songs and videos onto the fresh installation. Uncheck the box beside the sync automatically instruction and press Done, it will default to manual mode and it will be empty. Your niece can add her own songs when she connects to her computer:
Restoring iPod to factory settings with iTunes 7
Managing content manually on iPod and iPhone
Syncing Music to iPod
One thing to be aware of when using an iPod in manual mode is that the "Do Not Disconnect" message will remain on the display until you physically eject the device: Safely Disconnect IPod

Similar Messages

  • I need to get the music off my Ipod Nano 2nd GEN onto either ITunes or in a music foldes on my new computer. Not all the music was purchased from Apple Itunes HOW DO I DO THIS WITHOUT LOOSING ALL MY MUSIC??

    I have not had a computer for several years and I just got a new one. My old computer got a virus and when that happened all my music was lost. Thank goodness I had it all on my Ipod Nano 2nd GEN. Now my problem is that I don't know how to get the music off my Ipod Nano onto my new computer!!! I was able to get the songs that I purchased thru ITunes by just authorizing my new computer. But I have alot more music that is on my Ipod nano that I can't put into my ITunes library. In fact, I can't even get my music into a file folder on my computer!! I really need help. I don't have any copies of the music anywhere else and some of it is hard to get. How do I get my music either into ITunes or into a file folder on my new computer or even if I could get my computer to recognize my Ipod and sync all the music into windows media or something like that. Every time I connect my IPod all that happens is that it tells me if I sync the IPod that it will replace all the music from my ITunes library on to my IPod. And I am guessing that means all my music on the IPod will be erased. PLEASE HELP ME!!!! Thanks from the bottom of my songsters heart

    From the OP: "My old computer got a virus and when that happened all my music was lost. "
    They don't have the music on their computer so they cannot transfer the iTunes folder, from the computer to their iPod and then to the new computer. And if they try to enable disk use on the iPod it will erase all the music that is on it. The method you cited is moving the files in a data format using the iPod as a flash drive. It doesn't work if they are in music format. That is why I suggested Yamipod.

  • How do i readjust the right and left speaker in iPod nano 2nd gen.

    How do i readjust the right and left speaker in iPod nano 2nd gen.

    Are you playing a song in iTunes that listed in contents of iPod while it is connected. Try going to your music lib and play a song and disconnect your iPod.
    Also, make sure you are not located in some sub dir that utililizes iTunes.
    You can also hit 'ctrl,alt,delete' to see what applications are running on your PC.

  • Brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help

    brand new/never been used iPod nano 2nd gen keeps on charging and won't turn on when removed connection to pc/charger. how can i fix this? pls i need help
    i did that middle button and top button for 6-10 seconds, hold play button, that hold button and got it right back and still it won't on but it is detected on my pc and itunes. i've already even put on some songs but it keeps on charging and charging for how many hours and if i remove it, it shuts off and won't turn on again.

    brand new/never been used iPod nano
    Call Apple Care.   You are still under warranty.  You also have 14 days from the date of purchase to return your iPod with no questions asked. 
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired. 

  • When i connect my ipod nano 2nd gen, it charges but does not appear in windows or itunes.  I tried the reset but it didn't work.  how can i fix this?

    I bough a 4g Ipod nano 2nd gen for my cousins birthday.  When i plug it into my computer it charges but does not show up in windows or itunes.  I tried reseting it, reinstalling itunes, everything the site said but it didn't help. I am trying to sync songs to it for my cousin, but it won't work with it not connecting.  Could the wire have something to do with it or is there a bigger problem here?

    See
    iOS: Device not recognized in iTunes for Windows
    - I would start with             
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    However, after your remove the Apple software components also remove the iCloud Control Panel via Windows Programs and Features app in the Window Control Panel. Then reinstall all the Apple software components
    - New cable and different USB port
    - Run this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Also see:
    iPod not recognised by windows iTunes
    Troubleshooting issues with iTunes for Windows updates
    - Try on another computer to help determine if computer or iPod problem

  • Ipod nano 2nd gen and dock/alarm clock

    i have read through alot of the posts and have not seen anything similar to my question.
    i got my daughter an ipod nano for xmas.
    we really dont leave the computer on alot and she was wanting a docking station/speaker setup. i found one that charges it/ has speakers and is also an alarm clock.
    she likes the idea of having the alarm clock with it.
    this is the model she got: curtis iMode ip210 link to where it was bought http://hhgregg.com/ProductDetail.asp?SID=0B568914D18A4CBEB2E80A95E8C46043&Produc tID=17180
    we have not hooked it up yet because of a small problem maybe. (hooked up to power that is)
    it came with a bunch of different adapters for the different ipod versions. well the nano one is incorrect. i guess due to ours being a 2nd gen version.
    the ipod goes right on the dock fine with out it.
    the little plastic adapter i got with the ipod kinda works in the slot of the radio but would need a little modification to snap in. the difference is the outside shape and would just needed some sanding. i have called the support number for the radio and all i could get from the was its not compatable. and i am not too sure why.
    from what i have found out is all the ipod dock connectors are the same and there is no difference. not sure about this just what i have noticed.
    i tried to call my local apple store and ask them but that guy started talking about firewire and problems. i told him how it docked and what it was and he still insisted on talking about firewire and those problems. i hung up as it didnt sound like he knew anything.
    so now would i be ok in useing the adapter i got with the ipod and makeing some slight mods(sanding outside edge) to it. or is the something totally different between the 1st gen and 2nd gen that would mess up the ipod if put in this unit.
    the reason i want this unit as it will replace her current alarm clock and she has a loft bed and its the only unit that we have seen that will fit and is in our price range.
    thank you for your help
    dawg
    ipod nano 2nd gen   Windows XP  

    The dock adaptor that came with the iPod is meant to fit Apple's universal dock and not a 3rd party accessory.
    The reason you are having issues is because although the dock connectors on iPods are all the same (the pins are in the same place), the connector on the second gen nano is in a slightly different place than on the first. If you look at it from the bottom with the iPod face up, it's slightly more to the left. This, and the fact that it has a metal case with rounded edges, has made the new nano incompatible with almost all these type of accessories.
    It's been mentioned here several times, and a few people have been able to get the manufacturer of the dock to supply them with an adaptor.

  • I tunes does not find ipod nano 2nd gen

    about a month ago i got a nano 2nd gen...installed itunes and downloaded songs to my nano. Now my computer doesnt recognise it and itunes does not find at all. I completed the 5 r s and still nothing. My nano has been charged several timesbefore but will not charge now. HELP

    Until yesterday, I finally received a 4th Gen 20GB iPod (around 2 years old)from a friend and asked me whether I could fix it for him, which has been left untouched as a paper-weight for almost 2 months.
    I tried to turn it on, and the screen was completed blank and the device looked dead. Before doing anything I prepared the following:-
    1. A window based PC
    2. A Mac computer
    3. An USB iPod cable
    4. A Firewire iPod cable
    5. An iPod AC charger
    As the iPod was previously formatted on a PC, therefore I tried to plug it with a PC via USB cable, it did not response and not able to get recognized by the PC. I ejected the iPod and connected with an AC charger, after a few minutes, I did a Reset for the iPod
    How to reset iPod
    http://docs.info.apple.com/article.html?artnum=61705
    The iPod showed an Apple sign, it stuck there for almost a minute, the screen then showed a battery with an exclamation mark sign, and after a minute, the iPod turned off itself. I was sure that the iPod carried very low battery, and could not be charged by connecting it with any computer (both Mac and PC).
    I decided to let it have a charge with an AC charger for a bit longer, after 10 minute I did the Reset again, this time a sign of folder with exclamation mark showed up after the Apple sign, and again could not get recognized by a computer.
    I changed my mind, and put the iPod into disk mode
    Putting iPod into disk mode
    http://docs.info.apple.com/article.html?artnum=93651
    Instead of connecting with a PC, I plug it with my Mac using a Firewire cable, it did not response, so I switched the cable to an USB, interestingly, the iPod got recognized and a window pop up indicating that the iPod needed to do a Restore. Therefore I clicked “Restore”, after a few seconds, an Error message pop-up with Error Message 1417, the sign that I have been waiting for quite sometime.
    I ejected the iPod and the screen immediately showed a folder exclamation mark (a sign indicating a corrupted or a failure iPod OS). I am forced to put the iPod into disk mode again, connected with the Mac computer and open the Disk Utility
    1. Open the disk utility, hope your iPod appears there (left hand side), highlight it
    2. Go to Tab “Partition”, click either “Delete” or “Partition”, if fails, skip this step and go to 3
    3. Go to Tab “Erase” , choose Volume Format as “MAC OS Extended (Journaled), and click Erase, again if fails, skip it and go to 4
    4. Same as step 3, but open the “Security Options....” and choose “Zero Out Data” before click Erase. It will take 1 to 2 hours to complete.
    5. Eject your iPod and do a Reset
    6. Open the iTunes 7 and click “Restore”
    It managed to complete the Restore process, and started to sync with the iTunes. However, it got stuck at the song no.238 from the total of 2000. I left it for an hour, but with no process, instead the iPod became “Hot” and the iTunes showed an Error message of 1428. I ejected the iPod from my Mac computer, the iPod’s screen turn to show the famous killer icon;“The Sad iPod“.
    This time it was totally dead, even failed to put it into Disk Mode and non of the computer could recognize it. Sigh, I hated to do it but I knew that I must did the following:-
    Holding the iPod in my Palm, and hitting it on a surface of a Sofa with 5 attempts.
    Did not surprise me, the iPod turned on and it showed the Language Menu on the screen. So, I put it into Disk Mode and connected with my window PC.
    The PC showed a sign and indicated that an USB device had been connected with it. I opened the iTunes and did a Restore there.
    However, an Error Message 50 showed up, but I were not worried about it, connected it back with my Mac computer with it in Disk Mode. As expected the iTunes opened and allowed me to do a Restore there.
    This time it managed to complete the process and a window of register pop up. After the completed the process, the iPod started to sync with the iTunes again, which finally managed to complete the process.
    I left it connecting with the AC charger overnight. In the next morning, I switched it on and have a play with it, I am so glad as it is working like a charm.
    From the above experience, I would like to share it with the user the following:-
    1. It always better to charge with an ac charger instead of the computer, as when an iPod carrying with very low battery, it may not able to get charge from a computer
    2. Try to connect the iPod with a computer, switching between USB and Firewire
    3. Try to format an iPod with HD problem, with a different kind of computer e.g. Mac or PC, as the formats are totally different, the way it formats may able to solve the bad sectors on the HD
    4. It may get better chance to get your iPod recognized, if you put it in Disk Mode
    I hope the following works in your case as I did.

  • Sound almost completely lost on nano 2nd gen

    Sound almost completely lost on nano 2nd gen when using with headphones, though sound is fine when using speakers / in car lead. How can I restore full sound with headphones?
    Thank you!

    anyone have any ideas?

  • 'Other' listed on Nano 2nd gen after restore

    After I restored my Nano 2nd gen for the second time, I have an Orange bar along with the Green status bar that shows up on Itunes on the Summary page.
    It is called 'Other' with no additional details.
    I cannot find it on the ipod to delete it. Is it corrupted and if so, how do I get rid of it? It is 257 MB in size.

    Hello fairyfatale,
    And welcome to Apple Discussions!
    _The Other section can or will include any of the following items:_
    * Your iPod's O/S / Software (This will always be present)
    * Any notes you store on the iPod
    * Any external files stored on the iPod such as documents, etc
    * Lyrics (if you have any)
    * Album Artwork
    * Games (this includes the default games that come with the iPod. These cannot be erased )
    Usually this section's size is in MB and will always be there because at the minimum, it will contain your iPod's O/S.
    B-rock

  • My iPod Nano 2nd Gen has a battery problem.

    iPod Nano 2nd Gen keep dying after 10 mins of usage. 
    What should I do? How much for Apple service?
    Thank you.

    Do an out-of-warranty replacement for $65.

  • How do i fix my nano (6th gen) from automatical turning the volume down by itself

    how do i fix my nano (6th gen) from automatical turning the volume down by itself? I bought my first nano (6th gen) and it started to happen. so, i just bought a new one because i'm unavailable to take it to an apple store. now, the second one is doing the same thing.  i've reset them through itunes, and it continues to happen. any suggestions?

    Did you check your volume limit settings?
    copied from page 24 of the iPod_nano_6thgen_User_Guide

  • IPod Nano (2nd gen.) not displaying in finder or desktop

    iPod Nano (2nd gen.) not displaying in finder or desktop BUT shows up in iTunes, it used to show up on the desktop, I don't get it
    help would be appreciated
    Thanks

    Have the same issue but with latest iPod nano 7 Gen, second day trying

  • ITunes and my PC won't recognize my iPod Nano (2nd gen.)

    Just this morning, my iPod nano (2nd gen.) stopped getting recognized in my iTunes and on my computer hard drive. It still charges when it's plugged into the computer, but the device is not recognized otherwise. What is going on?? Thanks!

    p.s. I also connected it to my husband's laptop and his iTunes wouldn't recognize the device either (if that helps).

  • Itunes won't recognize my ipod nano 2nd gen anymore?

    itunes won't recognize my ipod nano 2nd gen anymore. it just charges it???

    Refer to this article:
    iOS: Device not recognized in iTunes for Windows
    http://support.apple.com/kb/TS1538

  • My computer doesn't recognize my ipod nano 2nd gen

    My computer running Windows 7 doesn't recognize my ipod nano 2nd gen.  Also my ipod not seen in my itunes.  I did all the reset stuff and nothing works.  Do you think it is just shot???

    Make sure you have the latest version of iTunes. Are you a Mac or PC user?
    Hm so have you also tried completely erasing your iPod?

Maybe you are looking for

  • Assert Failed:  Flashfarm

    I am having a problem on intel macs with a crash after an assert is tripped Assert failed: /flashfarm/depot/main/player/branches/FlashPlayer/FlashPlayer8_MacIntel_Integrated/platfo rm/mac/plugins/../mpi_player.cpp:5445 this is with 8.0r27 (is there a

  • IPhone 6 240fps slow-motion import

    Hey everyone, I understand when I import the clip into Final Cut Pro I choose 30fps, and then click on the clip and set it to automatic speed. Then I will get my 240fps slow-motion. 2 issues though. I would like to have the same effect as Quicktime P

  • MacBook and iMac via AirPort Extreme?

    Hello. If I get a new MacBook, can I connect directly with my APE-ed iMac and a USB hard drive ected to it? Or do I need to go via an AirPort Extreme Base Station? Would an AirPort Express work as the base station? Thanks.

  • External text issue

    I have tried to look up this issue in the flash help, lynda.com and here with no luck. I have an issue with external text that I import. The text loads fine but when I click to go to another frame in the same timeline the previous text stays and the

  • Problem with cesession.jar: Incompatible object argument for function call

    Hi, I'm looking for an actual file cesession.jar because my current version from BOXI SP2 (01.03.2007 09:22, 62 KB) causes an error. Who can help me? Best Regards Arnold type Exception report message description The server encountered an internal err