How do I regain emojis after resetting my Air iPad?

How do I regain emojis lost when I reset my Air iOS7. v 7.1.2. ?

Hooray..... Solved.  It appears there was a "glitch" somewhere in its innards and when I powered down and rebooted all was fixed!!!  Thanks.

Similar Messages

  • How do I regain ITunes after pc crash

    How do I regain iTunes after pc crash

    Restore your lost data from the most recent backup you made of the PC before it crashed.

  • How do I recreate passwords after resetting phone?

    How do I recreate passwords after resetting my iphone5?

    Yep, that erases all saved WiFi passwords. Means you'll have to input them again when you join each network. There's no way to "just add them back", if that's what you're asking, nor can they be retrieved anywhere.

  • How Long will it take to reset the 16gb ipad with clear all data in it.

    How Long will it take to reset the 16gb ipad with clear all data in it.

    I have the same problem. I try to reset my ipad / iphone 3g using the reset and delete all content on general. It is almost 2 days now but my ipad / iphone 3g are not yet finish. Only apple logo / looping circle appears on the screen. What will i do? thanks... iOS 5.0.1

  • How do I do a hard reset on my ipad.  It's locked with a passcode., How do I do a hard reset on my ipad.  It's locked with a passcode.

    I forgot my passcode, how do I do a HARD RESET to clear everything out?

    A hard reset will not help you now. That won't work and it won't "clear everything out".
    You have to restore the device within iTunes. You want to use the same computer that you always sync with so that you can restore your app data and settings. You can restore with any other computer, but you will lose everything on the iPad.
    You will probably have to use recovery mode
    http://support.apple.com/kb/ht4097

  • How to find iCloud backup after reset

    Hi,
    recently my iPad2 froze/Hung after an update to iOS7xx. After a non responsive period of a few hours and with no response to shutdown/startup I tried to enter DFU mode with the hope that I could then simply use recboot or something similar to exit DFU mode. No such luck so after downloading many different versions of firmware, I finally got the iPad to install as a new device using a new computer and fresh iTunes. Now I need to find my backup so I can restore using my Apple ID but don't know enough about iCloud to go about it. Can someone please help me with this. Many thanks.

    Go to Settings > General > Reset > Erase all contents and settings.  After the reset, go thru the setup until you're on that page that gives you the option to "Restore from iCloud backup".

  • How do I install ilife after resetting my macbook to factory settings

    I reset my Macbook to factory settings with the one disc, then tried to download the ilife from the applications disc and it comes up with an error message and it won't install ilife.  What do I do?

    Restore the iPod.
    Thanks for the reply. My issue is that I have restored the ipod but the issue is itunes. It doesn't seem to recoginze my ipod as restored.

  • How do I rescue OS X Lion after reseting the hard drive ?

    After reseting the hard drive I need now to replace my old OS X Lion. I don't have a copy in any other physical way but the internet by the App store. How do I manage to get back my old version of the OS in order to put my litlle mac-mini back to work?
    Thank you in advance.

    Try reinstalling by following these instruction: http://support.apple.com/kb/HT4718?viewlocale=en_US&locale=en_US

  • I lost all apps after reseting and updating to IOS 7.1.1 How do I get them back?

    I lost all apps after reseting and updating to IOS 7.1.1 How do I get them back?
    I did a reset of my phone yesterday and now when I go to purchaed to download my paurchsed tabs there is nothing there.
    I see them in my ipad but they are not in my itunes app section either.
    I searched for one in the app store and it usually said "open" or had the cloud icon with the little arrow to downlaod again (free). But none of that shows up at all this time. All the apps that I'm missing show up in the pp store for me to buy again like I never purchased them at all!
    What's going on?
    I'm missing a ton of apps!
    Pleae help me!
    Gaby

    I just wanted to add this information to my post:
    I have purchaed, free and paid, 618 apps.
    In my phone apps to add to my phone when I plug it in my computer only 266 apps show up.
    In my itunes "puerchased list" only 266 show up.
    Thank God I have not updated my ipad. There I went to my "purchased" under the ALL list in the app store and there I do see my 618 apps!
    Where did my other 352 apps go? Which many were paid.
    I want my apps back.
    Thanks,
    Gaby

  • [SOLVED] How to unload any driver(dll) at the start up after reset??

    Dear Developers,
    Greetings!!!
    As, I am using AM335x BSP with WinCE 7. We have one vendor Wifi device and its binary images(driver installer). When we reset the target board, the modules do not reset and during the time of board booting, I found the following logs
    7771 PID:400002 TID:9e0006 Warning! Kernel DLL 'rwlpsdio.dll' is registered for thread creation/deletion notification. To improve performance if you dont need thread notifications call DisableThreadLibraryCalls from inside D
    7774 PID:400002 TID:9e0006 DriverEntry!!!!!!!!!!!!!
    7777 PID:400002 TID:9e0006 SDIO not initialized, returning!!!!!!!!!!!!!!
    7778 PID:400002 TID:9e0006 OSAXST1: <<< Unloading Module 'rwlpsdio.dll' (0x9E438000) at address 0xA7C90000-0xA7D47000 in Process 'NK.EXE' (0x87FDFAD0)
    PB Debugger Unloaded symbols for 'rwlpsdio.dll'
    We conclude that when we reset the device, the driver is not unloading and that why, its not releasing the resource. 
    My motto to solve the issue by creating an application that run at every startup after reset and unload the driver. So, that during the time of loading it, it re-loads properly..
    I am searching it on google but unable to find any way so far.
    ASAP reply must be highly appreciated 

    Dear Developers,
    @balaji,
    As I had read the link https://social.msdn.microsoft.com/Forums/en-US/98aa5eca-0b38-4f6e-bf7b-81cb7068422e/sdio-wifi-driver-and-prefetch-aborts-problem?forum=winembplatdev
    And, in the above thread you were replying as 
    Hi Misbah,
    NdisMRegisterMiniport sure needs to be called from DriverEntry. Can you check if NdisRegisterAdapter is present. This ideally should be somewhere in your stream interface. 
    I am taking a wild guess here , perhaps you can may be introduce some delay in DriverEntry , so that the stream driver gets a chance to load?.
    e.g. you can use one of NdisWaitEvent functions.
    All the best.
    Regards,
    Balaji.
    As, per my knowledge, the DriverEntry is the first function that is called by ndis after loading the ndis.dll and it is responsible for registering the driver with NDIS by  using
    NdisRegsiterMiniportDriver.  
    Any how in my case, DriverEntry is called but the same function we are getting one error and that's why driver is not registered with NDIS.
    We are checking SDIO  interface status, either it is uo or not. If it is up then fine and if not then display warning and unload the driver.
    So, in my case, the SDIO status is not up after resting the device.
    Any suggestion will be appreciated????

  • My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

    My husband uses adobe cs5. The clone tool isn't working and after resetting the tools adobe bridge now goes to picasa. How can we make the clone tool work and have bridge go to cs5 not picasa?

    A lot more information about your hardware and software is needed.
    BOILERPLATE TEXT:
    If you give complete and detailed information about your setup and the issue at hand,
    such as your platform (Mac or Win),
    exact versions of your OS, of Photoshop (not just "CC", but something like CC2014.v.2.2) and of Bridge,
    your settings in Photoshop > Preference > Performance
    the type of file you were working on,
    machine specs, such as total installed RAM, scratch file HDs, total available HD space, video card specs, including total VRAM installed,
    what troubleshooting steps you have taken so far,
    what error message(s) you receive,
    if having issues opening raw files also the exact camera make and model that generated them,
    if you're having printing issues, indicate the exact make and model of your printer, paper size, image dimensions in pixels (so many pixels wide by so many pixels high). if going through a RIP, specify that too.
    a screen shot of your settings or of the image could be very helpful too,
    etc.,
    someone may be able to help you (not necessarily this poster, who is not a Windows user).
    Please read this FAQ for advice on how to ask your questions correctly for quicker and better answers:
    http://forums.adobe.com/thread/419981?tstart=0
    Thanks!

  • I inadvertenly reset my phone and now all my wife's info is part of my phone and I have lost my stuff. How do i regain?

    I inadvertenly reset my phone and now all my wife's info is part of my phone and I have lost my stuff. How do i regain?

    Have you tried basics from the manual?
    Restart?
    Reset?
    Restore?

  • My iPad crashed when I updated latest iOS software. After resetting the system, I am unable to get back Pages, Numbers and Keynote Apps. Anyone has same problem? And how can I get back the apps?

    My iPad Air crashed after updating latest iOS software. After resetting the system, Pages, Numbers and Keynotes are not available. How do I get the apps back into my iPad?

    You can also re-download the apps.
    App Store>Purchased>Re-download apps

  • After resetting my password my FaceTime and I cloud can not verify email already in use how do I fix this

    After resetting my password FaceTime and I cloud cannot verify email how do I fix this

    Try here...
    The Backup disk image ... sparsebundle ... is already in use.
    From Pondini’s excellent Information Here...
    http://pondini.org/TM/Troubleshooting.htm

  • HT1459 how to permanently fix white screen after resetting and restoring

    How to permanently fix a 'White Screen" after resetting and restoring? 2nd generation ipod

    There are two different resets. The reset you did involved holding the sleep/wake & home button.
    The other reset will do exactly what it says. That reset is located in Settings - General - Reset.

Maybe you are looking for