How do I register for the 3year warranty for printer 6700

Can not find page to register for 3year warranty for printer 6700

Shifad,
Please visit our Total Care for your HP printer or monitor site at http://www8.hp.com/us/en/support-drivers/total-care/totalcare-for-printers.html.
I work on behalf of HP.
Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
Click the KUDOS THUMBS UP on the left to say “Thanks” for helping! .

Similar Messages

  • Yesterday I purchased a new ipod classic to replace one that had worn out. The price was $179. I wonder if I am eligible for the extended warranty for $59. Can't seem to navigate through the apple support option to get answer. Anyone know?

    yesterday I purchased a new ipod classic to replace one that had worn out. The price was $179. I wonder if I am eligible for the extended warranty for $59. Can't seem to navigate through the apple support option to get answer. Anyone know?

    Put in the serial number but was not offered an extended apple care plan. I guess if you purchase a new one because your old one is out of warranty you get a deal for $179 but you don't get a chance for an extended warranty. You don't get a new box or earbuds, just a brand new iPod. Good deal but since my first died under warranty, got a new one for free, second one I smashed the screen and got a new one for (I don't remember) and now the hard drive went and I paid $179 for a new one, I was hoping to get an extended warranty. But I guess not...
    Thank you!

  • I got a new computer. How do I make this the primary pc for all of my apple devices?

    I purchased a new pc. How do I make this the primary pc for iTunes and all of my apple devices? I need to know how to take all Itunes files off old pc and put on new pc. Also, disable old pc.

    Backup your library using this User Tip.
    The same tool can be used to backup other important user data.
    Deauthorise the old computer
    Restore the library into the music folder of your new profile. (Use the same tool as for the backup)
    Install iTunes and sign in to your account.
    tt2

  • How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.

    How to set up Airport Extreme with Charter ARRIS Modem TM902A for the first time for WIRELESS.
    When Charter Tech goes to your site, have them connect the modem up, but do not connect the modem to your iMAC or MacBook Pro.  What you want to do is connect the Airport Extreme to the iMac or MacBook Pro first with the Ethernet Cable. You have to do this to configure via Airport Utility to set up the Base Station Name & Base Station Password.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple Tv, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.
    WHAT TO DO IF YOUR AIRPORT EXTREME WAS PREVIOUSLY SET UP FOR USE WITH ANOTHER CARRIERS ROUTER OR MODEM.
    NOTE:  If you already had your Airport Extreme connected for example, I previously had ATT Uverse and the Airport Extreme was connected to the Wireless Router Model 3801HGV, I disabled the Uverse Wireless and used the Airport Extreme for the Wireless signal in bridge mode, as the Airport extreme Signal is much stronger than the Uverse router, and I was able to obtain a Wireless signal with the Airport Extreme way much better with no signal loss which was very very frustrating with the Uverse router.
    Anyhow if you had it hooked up like this, now that you will be using it with the Charter ARRIS Modem TM902A, you will need to reset the Airport Extreme to clear out the old data it has in memory, with the previous set up otherwise it will not work. Trust me I spent 6 hours trying to make it work reading all Apple Support Community questions and answers relating to this type issue/problem others have been having trying to get their set up working. I tried all the tips, and I finally decided just to see if by chance I would be able to connect with someone with Charter Tech support who might be familiar with Apple to be able to assist me and by luck I did.  He told me why it was not working and was all due the previous configuration with the ATT Uverse router was still in memory with the Airport Extreme. Finally it was 10:30 PM when I decided to call Charter Tech Support and I had been working on this since 3:00 pm pacific. I did not call them earlier as all the post I read said they never received any good help from Charter. After calling them I finished up by 11:00 PM and was able to finally connect Apple Tv, iMac, iPhones and Macbook Pro. We love our Apple Product and Happy all is connected with the new
    Internet Provider Charter. I must say the speed is way way much better than it ever was with AT&T Uverse. 
    THIS IS WHAT YOU WILL NEED TO DO:
    First you will need to unplug the Airport Extreme, then by taking the tip of a pen or paper clip end you need to push the reset button on the back of the Airport Extreme and hold it
    down and at the same time plug the power cord back into the Airport Extreme count to 5 or 10 then release the reset button. Then once he light in front of the Airport Extreme stops blinking you need to plug the Ethernet cable from the Airport Extreme to your iMAC or Macbook Pro, and restart which ever one you have, then open the Airport Utility once it is back up.  If you see airport extreme pop up with the old network name or it shows and yellow triangle click on the Airport Extreme ICON it will not let you configure it but will ask if you want to get rid of it or remove and just do it.  Then Again restart your iMAC or MacBook Pro, open up Airport Utility again, and on the top left you should see under “Other Airport Base Stations” the MAC ID for the Airport Extreme.
    You will then create/configure a Wireless Network, create your Wireless Password that will be entered on each of your Devices, example, Apple TV, your iPhone, etc., you want to allow access to your Wireless Network you are creating.
    Wireless Security will be -> WPA/WPA2 personal or just WPA2
    Enter the Wireless Password you want
    Verify the Wireless Password (enter it again)
    After it is created you will see it on the Airport Utility window with the name you created for it and to the left, will be a Dot (circle that will be yellow).
    Next you then want to unplug the power to the Airport Extreme, and then take the end of the Ethernet cable you unplugged from the iMac or Lap top MacBook Pro and connect it to the back of the Modem.
    Next unplug the power cord from the modem and wait about 5 minutes, then plug the power back into the Arris Modem and wait until all lights come back on the modem wait
    about 5 minutes, then plug the power cord back to the Airport Extreme and you will see it the light blinking yellow.  Wait about 5 to 10 minutes, during this time Restart you IMAC or MacBook Pro, and once it is back up click on the Airport Utility and you should see on the Airport Utility screen.
    For INTERNET to the left the light should be green and you should see the Airport Extreme also appear and the light to the left on the screen should also be green.  If they are, you then should be able to click on the Wireless Symbol on top of bar of the screen and click to select the Wireless Network Name you created.
    If you Do Not See the light (Icon) next to INTERNET turn Green, or if you see the Internet Light Green, but the Light (Icon) next to the Airport Extreme is yellow, unplug the power again to the modem and unplug the power again to the Airport extreme and wait about 15 minutes or up to 30 minutes. Then plug the power cord back to the modem wait till all the lights light up then, plug the power cord back into the Airport Extreme and Restart your iMAC or MacBook Pro.
    The Airport Extreme light should change from yellow to green. Open up the Airport Utility to see what the indicators are showing they should both be green.  Again select Wireless network you created under the Wireless Icon on the top right of the screen. Open Safari and see if you are able to Route to a web page or the apple site should appear.

    I just got a Charter Modem. Model TM822. While I was moving, my Airport Extreme was still at my old place.
    I have a Linksys WRT320N I used for the initial Charter setup.
    I can get my Airport to work here, but the Internet light on the Modem flashes Yellow.
    Hasn't caused any issues so far but one thing I did notice.
    On the Linksys there were 3 DNS servers listed.
    The Airport Extreme only lists 2 and i don't see where I could add another, only change whats already there.
    I tried everything above, but light on modem still flashes yellow.
    I have the technicians cell phone. Told me "that shouldn't be" and gave the same advice listed above.
    I'll break down and call Charter one day, see if it's on their end. NSA tracking may need a reset LMAO.

  • How can I list all the domains configured for Weblogic Servers?

    How can I list all the domains configured for Weblogic Servers?
    I saw a note, which says the following:
    "WebLogic Server does not support multi-domain interaction using either the Administration Console, the weblogic.Admin utility, or WebLogic Ant tasks. This restriction does not, however, explicitly preclude a user written Java application from accessing multiple domains simultaneously."
    In my case, I just want to list all the domains, is that possible by using any scripts?
    Thanks
    AJ

    If you use WLS Node Manager and the Config Wizard was used to create the domains, then the list of domains should be in a location like this:
    <MIDDLEWARE_HOME>\wlserver_10.3\common\nodemanager\nodemanager.domains
    Enterprise Manager Grid Control also has support for multi-domain management of WLS in a console.

  • How do I find out the base dir for the current workspace ? Change?

    Assume I took over a colleagues JDeveloper installation.
    How can I find out the base dir for his JDevelopers workspace?
    Can I change this workspace base dir afterwards/later (without
    problems for the included sources and projects) ?
    Where can I change it ?
    I did not found an option in the settings?

    If you hover your mouse over the workspace you'll see the directory where the jws file is stored.
    For each project in the workspace you can go to the project properties and look up information in the content node of the preference - there you can also change the location preferences for where code is created.

  • How to implement tooltip for the list items for the particular column in sharepoint 2013

    Hi,
    I had created a list, How to implement tooltip for the list items for the particular column in SharePoint 2013.
    Any help will be appreciated

    We can use JavaScript or JQuery to show the tooltips. Refer to the following similar thread.
    http://social.technet.microsoft.com/forums/en/sharepointdevelopmentprevious/thread/1dac3ae0-c9ce-419d-b6dd-08dd48284324
    http://stackoverflow.com/questions/3366515/small-description-window-on-mouse-hover-on-hyperlink
    http://spjsblog.com/2012/02/12/list-view-preview-item-on-hover-sharepoint-2010/

  • How do I make Pages the default program for .doc files?

    How do I make Pages the default program for .doc files without having the need to change the default program for each individual.doc file?

    Navigate to a .doc file.
    Ctrl click the file
    Choose Open with and then go down the list, past pages, to other
    Navigate to pages
    Before you click Open make sure you click the 'Always open with' check box.
    You should be okay.
    You can do a similar think by selecting the file, Choosing File-Get Info
    Then open the Open With Disclosure triangle.
    select pages and then click CHANGE ALL
    Hope this hleps.
    M.

  • How do you turn off the special characters for letters?

    How do you turn off the special characters for letters? Where you hold down the key and it comes up with variations of the letter. For example ï í î ò œ å ß ł û
    It is very annoying when I try to play any online games. Thanks for the help

    Thank you so much It worked Thank you

  • How to check what are the enhancement done for MIRO transaction

    Hi Experts,
    Please help me out, how to check what are the enhancement done for MIRO transaction.
    Thanks in advance.
    Thanks,
    Basanagouda

    Hi
    Use the BADI
    Please refer these documents: [Enhancements required in MIGO|Enhancements required in MIGO; and
    [Enhancement in MIGO for Goods Movement|Enhancement in MIGO for Goods Movement;
    Hope this helps!!
    Regards
    Vijay

  • How do I set up the port interface for the WAN side of my RVS4000 to 100T Full Duplex?

    How do I set up the port interface for the WAN side of my RVS4000? The ISP says I need to set it to 100T Full Duplex, but where would I do that? In the Router's administration GUI I can't find any options to make such settings for the WAN side.

    The setup of the folders in Finder is entirely up to you. Whatever suits your needs is what you should do. Lightroom will be fine no matter how you set it up.
    So I'm not really sure what your question is.

  • I bought a macBook Air, all my devices were synchronized on a old PC. How can my MAC be the main basis for my devices?

    I bought a macBook Air, all my devices were synchronized on a old PC. How can my MAC be the main basis for my devices?

    Hi Sodam,
    Welcome to the Support Communities!
    The article below may be able to help you with this.
    Click on the link to see more details and screenshots. 
    iTunes: How to move your music to a new computer
    http://support.apple.com/kb/HT4527
    iTunes Store: About authorization and deauthorization
    http://support.apple.com/kb/HT1420
    Cheers,
    - Judy

  • How and where to modify the BAI File for Electronic Bank Statement

    HI,
    Can anybody explaing me How and where to modify the BAI File for Electronic Bank Statement.
    thanks
    Sap Guru
    kischowdary--gmail.com

    Hi
    Actually there were two formats BAI & BAI2, BAI2 format is latest one.
    Please ask for the latest file from bank and try to process.
    Thanks
    Kalyan

  • I am already customer and want to upgrade and take the offer of $29.99/month for the complete CS for existing customers (which I qualify for) but when I try 'BUY' - it keeps sending me to this forum?? How do I get the $29.99/month deal?

    I am already customer and want to upgrade and take the offer of $29.99/month for the complete CS for existing customers (which I qualify for) but when I try 'BUY' - it keeps sending me to this forum?? How do I get the $29.99/month deal?

    Hi Bev,
    Thanks for the the email - I understand now.
    I would just like to ask another question with regards to my new order for complete Creative Cloud which you suggested. I have now pre-paid for a full year but I’m not
    sure when I can start downloading the other APPS as they don’t seem to be updating on my current Creative Cloud account app display. It still shows my old configuration
    of products (i.e. Photoshop etc) and my ‘activity stream’ relates back to 9 days ago.
    Please let me know how to get my new order activated.
    Thanks
    Kevin Bartley
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

  • How can I turn off the auto renewal for Hulu plus?

    How can I turn off the auto renewal for Hulu Plus?  I can not seem to follow the instructions given...I can not launch I tunes and have a menu appear.......
    My special needs son accidentally signed up for this trial offer and I want it cancelled immediately.  I have received an email from them, but can not get it to work and I have been trying for over a week.......feeling frustrated.

    How/where are you trying to stop the subscription ?
    If you are using iTunes on a PC and the drop-down menus aren't showing at the top of iTunes then see if control-B gets them to show, or try alt-S and see if that gets the Store drop-down menu to show. You should also be able to cancel subscriptions by tapping on your id in Settings > iTunes & App Store on your iPod Touch an logging into your account.
    Auto-renewing subscriptions : Manage your auto-renewing subscriptions

Maybe you are looking for