How do I register my address with BT?
Hello!
I recently moved to a newly built flat, part of new development. The address is register with royal mail and water. The landlord did receive a letter from BT but the last two letters of the postcode was incorrect. I was informed by the landlord that a bt line has been installed and all I need to do is call BT for creating an account. Previously I had my tv, phone and broadband through SKY. I called SKY to have my services up running in my new property. Unfortunately I was only successful with my TV. I was told by SKY that due lack of exchange server near my area the provision of phone and braodband is not possible. I was also advised to contact BT to sort the problem. I tried reaching Openreach initially and they told me my address is not found in their BT database. Fewdays later, I wwas able to pick up another SKY wifi broadband signal in my laptop and so called SKY to discuss it further. This time I was informed that exchange server might be available and due to lack of provision for lines they will not be able to provide me any service. I did not spare them and demanded for more clarification. Finally I realised that the CSA was guessing the situation from my input as he had not access to the exchange server in my area. All he knew was that my postcode doesn't in his system and I was asked to call BT and register my address.
In the meantime, I did contact BT and placed an order for a new phone line. At thie point in time, I am not sure if I will really get a phone line and broadband. I was told by BT Sales agent that for sure they will get me a phone line first and then a week later my broadband will be sorted.
I'm desparately in need of a phoneline and broadband. Any help to resolve my problem will be much appreciated.
Thanks for your time and patience.
Regards,
Fred
Solved!
Go to Solution.
Hey, I have just read your mail and found it too similar to my case.
I am also going through the same phase.
We have just moved In a brand new development in canning town.
My provider for broadband and telephone line is Sky.
Everytime I contact to home move department to move our connection to new home , they always replied us by saying that they cannot find my address in BT openreach database.
I don't understand why they need my address to be registered with BT Openreach .
These days I am using BT openreach wifi hotspot and two devices are already placed in our home, even then our address in not registered in their database.
Also I have no idea whom to contact for registering my address.
I would be really helpful to you if you please let me know what success you have got in connecting SKY, so that I will also do the same.
Thanks,
Pallavi
Similar Messages
-
How can I register a number with iMessage for my iPad2?
I've got a 3G card with a mobile phone number. How can I register this number with iMessage?
Good afternoon;
So to confirm your posting,
lllaass wrote:
If it is a number/email address yu are calling:
- Is it entered in a contact in your Contact app.
- Does the person have the number/email address registered as their messaging number/emai addrrss.
the other person needs to register thier information? -
How do I register my iphone with itunes
how do I register my iphone with itunes
You don't as far as I know.
You can only buy from the itunes store in the country in=which you reside.
"Purchases or rentals (as applicable) from the iTunes Store are available to you only in the United States, its territories, and possessions, and are not available in any other location. You agree not to use or attempt to use the iTunes Store from outside of the available territory. Apple may use technologies to verify such compliance."
http://www.apple.com/legal/itunes/us/terms.html -
How can I get rid of this new 7.0.2 update and go back to the previous one and how can I register a complaint with Apple?
You can't go back.
You can leave feedback: http://www.apple.com/feedback -
HT1688 how can i register my phone with apple to obtain my 1 year warranty
how can i register my phone with apple to obtain my 1 year warranty
The one year standard hardware warranty comes with iPhone. No registration required.
If you have purchased AppleCare Protection Plan (APP) or AppleCare Protection Plan Plus (APP+) during the purchase of your iPhone, it is Auto-Registered if you purchased it at the Apple Retail Store or Apple Online Store.
If you purchased the boxed APP or APP+ from Apple or any reseller, you will need to go to supportprofile.apple.com and sign in with your AppleID username and Password.
You will need to register your Serial Number (found on iPhone Box or in Settings>General>About) and then register your APP or APP+ with the slip of paper that came in white box with the red Apple Logo.
Hope this helps! -
How do I register my email with imessage?
I tried imessage today for the first time. I do not know anyone with imessage so I tried sending an imessage to myself. When I typed in my email address it said that "this person is not registered." How do I "register?"
I have same problem.
But before I received messages normally. Today, my email is to give a warning to my friends, that my email is not registered! -
How can i get the address with drag and drop from address book into pages?
I want to creat a letter withe the new pages. Normaly it was possible to put the adress from the adressbook with drag and drop into the letter. So it was possible to create one letter with many different adresses. But now I didn't find this function any more. How to do ist now?
Withe best regards and I'm sorry for may bad english
KlausSounds like you "upgraded" to Pages 5.
Apple has removed over 90 features from Pages 5.
http://www.freeforum101.com/iworktipsntrick/viewforum.php?f=22&sid=3527487677f0c 6fa05b6297cd00f8eb9&mforum=iworktipsntrick
Pages '09 should still be in your Applications/iWork folder.
Archive/trash Pages 5, after Exporting your files to Pages '09, and rate/review it in the App Store, then get back to work.
Peter -
How do i register a number with Imessage?
I can't seem to find out how I register a number on iMessage. It keeps saying "this number is not registered with iMessage". Please Help!!!!
Good afternoon;
So to confirm your posting,
lllaass wrote:
If it is a number/email address yu are calling:
- Is it entered in a contact in your Contact app.
- Does the person have the number/email address registered as their messaging number/emai addrrss.
the other person needs to register thier information? -
How to Guarantee Response IP Address with Multiple Addresses
Scenario: the server has a NIC with two IP Addresses associated with it, and is running two instances of Sun ONE, one for each IP address.
How do I guarantee Sun ONE responds using the same IP address that the request came to?
I have seen issues on other servers where you sent a request to one IP address, it came back from a different IP address, and the firewall blocked the response because it did not match up with a request.Sorry, I meant "it is not possible for any web server to return a response from an IP other than the IP that received the request."
-
Registering email addresses with imessage
Attempting to send or write an email the recipients email address is marked with a red circle which says it is not registered with i message.
You can have 1 email address and 3 aliases which will work as email addresses.
-
How to use 2 email addresses with Digital editions
How do I get Adobe Digital Editions to recognize both my e-mail addresses, since I use both for mye-reader. ADE only recognizes ebooks from email addressed used when setting up ADE
Kobel,
Both cameras are being triggered at the same time, and both boards are aquiering the image at the same time. The problem you are seeing is related to copying the correct image.
The IMAQ driver is not currently multithreaded, therefore your second copy opperation can not execute until your first one is done. The trouble is that you have the immediate terminal set to false which forces the copy to wait for the next available image before returning.
Since the second copy does not execute until the first one is complete, it will consider the frame that just passed as old and wait for the next available frame.
The quick solution is to change the immediate terminal to true on both copies. The best solution depends on your entie application. You may want to re
ad this application note on Ring Aquisitions for ideas.
Regards,
Amaury Rolin
NI Applications Engineer -
How can i register my ios with apple id
Beste Apple Support,
Ik heb een macbook Pro (oude model) met lion ios erop. toen had ik geen apple id nodig om het apparaat te installeren, ik heb het ios nooit bijgewerkt. nu mijn ios niet meer werkt, heb ik de laptop door middel van fabriek instelling proberen in te stellen. dit lukt niet. ik krijg een foutmelding dat ik mijn apple id aan de toestel moet koppelen. ik heb van u collega begrepen dat ik mijn apple id eraan moet koppelen. kunt u dat in het systeem koppelen zodat ik gebruik kan maken van de fabriek instelling? zo niet wat kan ik verder doen???
Met vriendelijk groet
Dhafar Al fartousi
casusnummer: 541669361The one year standard hardware warranty comes with iPhone. No registration required.
If you have purchased AppleCare Protection Plan (APP) or AppleCare Protection Plan Plus (APP+) during the purchase of your iPhone, it is Auto-Registered if you purchased it at the Apple Retail Store or Apple Online Store.
If you purchased the boxed APP or APP+ from Apple or any reseller, you will need to go to supportprofile.apple.com and sign in with your AppleID username and Password.
You will need to register your Serial Number (found on iPhone Box or in Settings>General>About) and then register your APP or APP+ with the slip of paper that came in white box with the red Apple Logo.
Hope this helps! -
HT201342 How to use another email address with iPad
How do I use another email server name other iCloud
rdepom wrote:
Is there any way round this
I'm afraid not
or any way to put pressure on Apple to add this basic feature???
http://www.apple.com/feedback/icloud.html - but I don't think it's very likely they'll change it. -
Error while Registering the Database with Catalog..
I m creating recovery catalog in same database, and getting the errors.
1. I have created TOOLS tablespace
2.CREATE USER RMAN2
SQL> CREATE USER rman IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4 QUOTA UNLIMITED ON tools;
CREATE USER rman IDENTIFIED BY cat
ERROR at line 1:
ORA-01920: user name 'RMAN' conflicts with another user or role name
SQL> ed
Wrote file afiedt.buf
1 CREATE USER rman2 IDENTIFIED BY cat
2 TEMPORARY TABLESPACE temp
3 DEFAULT TABLESPACE tools
4* QUOTA UNLIMITED ON tools
SQL> /
User created.
3. GRANT RECOVERY_CATALOG_OWNER
SQL> GRANT RECOVERY_CATALOG_OWNER TO rman2;
Grant succeeded.
4. To create the recovery catalog:
1. Connect to the database that will contain the catalog as the catalog owner.
H:\>rman catalog rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 10:45:52 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
connected to recovery catalog database
2. Run the CREATE CATALOG command to create the catalog.
RMAN> CREATE CATALOG;
recovery catalog created
3. Optionally, start SQL*Plus and query the recovery catalog to see which tables were created:
H:\>sqlplus
SQL*Plus: Release 10.2.0.1.0 - Production on Fri Sep 5 11:53:36 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
Enter user-name: rman2/cat
Connected to:
Oracle Database 10g Enterprise Edition Release 10.2.0.1.0 - Production
With the Partitioning, OLAP and Data Mining options
SQL> select count(*) from cat;
COUNT(*)
91
SQL> ed
Wrote file afiedt.buf
1 select owner, table_name, tablespace_name
2 from dba_tables
3* where table_name='DB'
SQL> /
OWNER TABLE_NAME
TABLESPACE_NAME
RMAN2 DB
TOOLS
RMAN DB
ABAMCO_TEST
Next step is to registering the Database in the Recovery Catalog.
Registering a Database in the Recovery Catalog
H:\>rman TARGET / CATALOG rman2/cat@rock
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 11:56:09 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00554: initialization of internal recovery manager package failed
RMAN-04005: error from target database:
ORA-01031: insufficient privileges
I m getting above error while registering the Database with Catalog,
Can anybody help me how can I register the Database with Catalog.????
Waiting for Reply!!!!!!!Dear Manoj I can log in at TARGET Database.
H:\>rman
Recovery Manager: Release 10.2.0.1.0 - Production on Fri Sep 5 12:41:59 2008
Copyright (c) 1982, 2005, Oracle. All rights reserved.
RMAN> connect target sys/rock
connected to target database: ROCK (DBID=3255117147)
RMAN>
============================================================
USING CONNECT STRING as you said.
H:\>rman target "sys/rock@rock as sysdba" catalog rman2/cat@rock
Argument Value Description
target quoted-string connect-string for target database
catalog quoted-string connect-string for recovery catalog
nocatalog none if specified, then no recovery catalog
cmdfile quoted-string name of input command file
log quoted-string name of output message log file
trace quoted-string name of output debugging message log file
append none if specified, log is opened in append mode
debug optional-args activate debugging
msgno none show RMAN-nnnn prefix for all messages
send quoted-string send a command to the media manager
pipe string building block for pipe names
timeout integer number of seconds to wait for pipe input
checksyntax none check the command file for syntax errors
Both single and double quotes (' or ") are accepted for a quoted-string.
Quotes are not required unless the string contains embedded white-space.
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-00552: syntax error in command line arguments
RMAN-01009: syntax error: found "as": expecting one of: "append, at, auxiliary, catalog, cmdfile, clone, checksyntax, debug, log, msglog, mask, msgno, nocatalog, pipe, rcvcat, script, slaxdebug, send, target, timeout, trace"
RMAN-01007: at line 0 column 16 file: command line arguments
H:\>rman
It didnt work either.
I have only one database rock, and created recovery catalog in it. I want to register rock database with recovery catalog. -
Re register Hyperion product with Hyperion shared services
Hi all,
We have distributed environment.foundation,epma,cmgr on windows say node1,HFm on node2,planning on windows node3,initially i have installed essbase modules and configured them on node3. after that i have installed and configured essbase studio, essbase server and eis on oel linux. I have unistalled essbase, studio, and eis on node3.Now my planning module is not able to communicate with essbase installed on oel linux. iam able to view the essbase app group in shared services.and also i am able to create the datasource,where the connectivity of essbase is succesful.I feel that i need to re register planning module with shared services. Am i correct .If i am correct please help me how can i do that.also i followed the oracle document how to re register a module with hyperion shared services. i cannot find the config file for planning .please help me on this.
Thanks,
JeevanI think it will be helpful if you analyse the logs and then post the errors you are seeing.
Cheers
John
Maybe you are looking for
-
Trying to get values from a table in apex item.. form.. not sucessfulll
I have a form and have 3 fields.. .i need the value to be fetched from some other table... at the start... Note if the values are present in the fields it donot need to be fetched... Now how can i accomplish this.. I tried using ...onload event.. but
-
My iPhone 4s is recognized by itunes and iphoto however it does not show up in finder under devices.
-
Issues with iTunes 7.1 with Windows Vista
I recently purchased a laptop with Vista previously installed. After I installed iTunes I noticed problems with quitting iTunes, interface glitches, and at times it will freeze/shut down when iTunes Store is opened. I'm not sure if this is resolvable
-
How to add icon in front of Send To menu in context menu?
Is it possible to add icon to the Send To entry in the windows explorer context menu?
-
Server Running mac osx 10.4 Server Admin does not reflect recent changes made within WGM in relation to Mail quota increases. I have rebooted, refreshed mail system etc but the mail quota appearing in mail accounts is incorrect. Please advise the bes