How do I reinstall an upgrade version of Acrobat X

I lost my HD. How do I reinstall my upgrade version of Acrobat?

Hi JoeMazzeo2,
Please download Acrobat 10 from : http://prodesigntools.com/adobe-acrobat-x-10-pro-reader-suite-direct-download-links-ddl.ht ml   and use the serial number you have to activate it.
Since you own an upgrade serial number, make sure you have the older base version serial number too as the installer will prompt you to enter both the serial numbers to validate before activating.

Similar Messages

  • How can I reinstall a previous version of muse?

    How can I reinstall a previous version of muse? I tried under Apps in Creative Cloud - previous versions- but there are no previous versions of muse showing up. What can I do? Ever since muse upgraded yesterday it crashes every time I try to publish, preview or save a site...
    Edward

    The last update is horrible:/
    Muse crashes again and again and again. Not possible to work with this version!!!
    Sorry, but we don't have time to try this or try that... The fact is, using version 2014.2 no problems. Suddenly it's impossible to work with.
    Make a version 2014.2 available for download so that we can downgrade. I can't wait until the problems are solved, because we have to change some things very urgently.

  • How to re-install CS3 upgrade version?

    had to delete my hard drive and start anew. I reinstalled my old CS2 and to start it would not let ne register it and now it won't let new use my CS3 upgrade. can anyone help

    but it's not giving me an error it just starts and shows the icon on the launch bar and then the icon disappears and nothing happens. Jeff L Franz <Removed by Moderator>
          From: Jeff A Wright <[email protected]>
    To: jeff franz <Removed by Moderator>
    Sent: Friday, November 21, 2014 6:42 PM
    Subject:  How to re-install CS3 upgrade version?
    How to re-install CS3 upgrade version?
    created by Jeff A Wright in Downloading, Installing, Setting Up - View the full discussionI am sorry Jlfranz please be aware you have posted in a public forum.  If you can provide details on the type of error you are experiencing then it may be possible to suggest a next step. If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/6952663#6952663 and clicking ‘Correct’ below the answer Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page: Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/6952663#6952663 To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in Downloading, Installing, Setting Up by email or at Adobe Community For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • How do I reinstall an older version of the software on my IPod touch?  Installed the latest update and now it no longer works in my car

    How do I reinstall an older version of the software on my IPod touch?  Installed the latest update and now it no longer works in my car.

    I'm sorry, but Apple does not provide a downgrade path for iOS. Because downgrading is unsupported by Apple we cannot discuss it on these forums.
    You may leave comments at Apple Feedback.

  • Reinstalling CS6 upgrade version after drive failed.

    I am reinstalling CS6 upgrade version after the hard drive in the computer failed. The CS 4 that was used as a previous product is gone and now the installation program is looking for CS 5 or 5.5. What do I do?

    As long as you registered, you should be able to go to Adobe.com from this site (you should stay logged in that way) and mover the cursor over your name (upper right). Select My Products and Services. You should get a list of your serial numbers. Again, you have to be registered to have this option.

  • How can I reinstall a downloaded version of CS5.5 without a purchase upgrade to CS6.0?

    My hard drive had issues and needed to be wiped clean.  I just want to reinstall the original version and not pay to upgrade due to a hard drive issue.

    You can download CS5.5 products from - http://prodesigntools.com/adobe-cs5-5-direct-download-links.html
    You will need serial number to activate CS5.5 - http://helpx.adobe.com/x-productkb/global/find-serial-number.html

  • How can I reinstall the trial version of Photoshop 2014 cc?

    I downloaded a trial version of Photoshop 2014CC and installed it but the software did not work. I did the update but it still did not work. So I uninstalled the software and tried to reinstall the trial version but adobe download allow me only to update which always failed as the trial version was uninstalled. How can I do. Without the trial version installed, can I buy, install the software and activate?

    I finally resolved the problem by uninstalling the creative cloud and reinstall both cc and photoshop 2014 cc. This time it allowed me to reinstall. I guess the problem was caused by cc still flagged that the photoshop had been installed.
    BTW my os is Mac OSX 10.7.5
    Thank you for yr prompt response.
    Rgds,
    Nuekruk
    Sent from my Samsung Galaxy smartphone.

  • Firefox 4 is too uncomfortable for mouse operations, menues are too tiny, how can I reinstall the older version 3.6 ? in German or English

    firefox 3.6 is much more convenient for me, than version 4. I want to get it back, but how?
    Look at the little firefox-button on the topside left (red button) , where are the comfortable menues to konfigurate the browser, to handle all menues easily ?
    I urgently want to reinstall the precious version again!!!

    You can also look at:
    * http://www.computertechtips.net/64/make-firefox-4-look-like-ff-3-6/
    *Theme Font & Size Changer: https://addons.mozilla.org/firefox/addon/theme-font-size-changer/
    You can use one of these extensions to adjust the default font size and page zoom on web pages:
    * Default FullZoom Level - https://addons.mozilla.org/firefox/addon/6965
    * NoSquint - https://addons.mozilla.org/firefox/addon/2592

  • How do i install cs5 upgrade version from cs2?

    hi
    unsure whether this new win8 machine is 32 bit or 64 bit
    not sure if my upgrade from cs2 to cs5 purchase is 32 bit or 64 bit

    Thank you John,
    Very helpful.  Unfortunately, when it came to the point that the install asked for the earlier version, it said it was not a valid upgrade version.  In seeking an answer to this problem i went onto Adobe chat and was informed that
    Laishram: I have checked and see that the serial number for the CS2 is not a valid upgrade path to the CS5 product.
    Chris: hmmmm. everything i read is that the upgrade version was for cs2. i just purchased it because the computer i had died and i bought a new one. i knew that my upgrade to CS5 version wouldn't work without an earlier version so I bought CS2 on ebay just two weeks ago. what can i do?
    Laishram: I am sorry CS2 is not a valid upgrade path to the CS5.
    I couldn't get more info from Laishram as to WHY is wasn't a "valid upgrade path" and I don't know what "not a valid upgrade path" means but, i'm guessing that i did something wrong when purchasing CS2.  I was told that i could use the upgrade version(of CS5) that i purchased (to upgrade FROM CS2 to CS5)  to upgrade to CS 6.  So I'll have to do that I reckon.
    Chris

  • How can I get the previous version of Acrobat back?

    The new DC version is **** and keeps crashing itself and the program I'm printing from when I print to PDF which has wasted too much of my time.  I'm using CC and can't see an option to reinstall a previous version.

    Uninstall, and go here for previous versions of Acrobat Reader.
    Acrobat Reader - Download Old Versions for Windows

  • Trouble installing Acrobat X Upgrade Version using Acrobat 7 standard

    Hi forum,
    some years ago I bought a Acrobat X Upgrade-Version for upgradeing my Version 7 standard. No problems installing that software that time.
    Now I bought a new notebook and wish to install the software again on this new machine.
    I installed the version X, using the key from the CD. Starting the program, I have to type in te key again. The software accepts the key, but wants to know the key of version 7. No problem, I thought, typing the version 7 key in the following field.
    But now the software says that ist a wrong key?!?
    So I can´t aktivate the software... :-(
    Installing version 7 first and then version X causes the same problem.
    Any help? What can I do?
    Thank you very much in advance!
    Werner

    Hi Werner ,
    Please connect with the customer support for the same.Here is the link .
    https://helpx.adobe.com/adobe-connect/kb/connect-chat-support.html
    Regards
    Sukrit Dhingra

  • How do I download the latest version of acrobat?

    I am trying to print a pdf and a box keeps popping up stating that i don't have the latest version of acrobat...........so when I try to print, it prints a blank.

    For printing the pdfs you can download the free Adobe Reader from this location: http://get.adobe.com/reader/
    If you are looking for Acrobat, you can download 30 day free trial from this location: http://www.adobe.com/products/acrobat.html
    ~Deepak

  • Upgrade to Lion: Mail is not compatible and won't open.  How do i reinstall an updated version Mail?

    So, I'm currently trying to update my parent's computer and in the process of updating their Mail application it has become unusable.  My computer at home (not my parents computer) ran into the same problem before I updated to Lion and deleting the preferences for Mail solved it.  Plus, I have read previous posts about this similar problem and a typical troubleshooting solution was to delete the Mail preferences.
    After all of my software updates (Mac OS X Snow Leopard 10.6.8) and deleting the preferences for Mail, I still receive the same error message when trying to open the application.  "Mail can't be used on this version of mac OS X.  Try opening the version of Mail located in the Applications foler on your computer."  My applications folder has not been adjusted, edited or even touched from it's original state in the dock/home folder.
    I contacted AppleCare support and they advised me to reformat my computer.  I think that's a little... unneccesary??  It's just Mail that isn't working.  The rest of the applications (e.g. Safari, Address Book, iPhoto, etc.) open just fine.
    After a second call to AppleCare, they had advised me differently than before.  Once they found out that my personal computer has Mac OS X Lion installed from the App Store, they suggested I simply upgrade my parents computer to Lion.
    So, I used my download from the App Store and upgraded.  It went smoothly, but Mail still will not open properly.  And instead of the original error message, it comes up with this:
    "Check with your developer to make sure Mail can work with your version of Mac OS X.  You may need to reinstall the application.  Check if there are any updates available for the application."
    How can I re-install just Mail?  A startup disk is not accessible for me right now.  Can I download the latest version of Mail and install it from the Apple.com website?

    Applesince822 wrote:
    Do we get money back if it no longer opens?
    Certainly not without going through basic troubleshooting steps first. Many times some basic troubleshooting will fix things. If you haven't tried anything yet, you cannot say for sure that the app will not work at all.
    There are a number of things in here that you can try.
    http://support.apple.com/kb/TS1702?viewlocale=en_US&locale=en_US
    In a worst case scenario, you can always delete the app and download it again and see if it will work. You will not be charged again as long as you use the same Apple ID that you bought the app with.

  • How do I reinstall an older version of Aperture from the App Store?

    Hello,
    I have an older Macbook - 13 inch early 2008. It is still running fine on 10.7.5 Lion, but can't update to a later version of OS X, as it is not compatible. I have Aperture 3.4.5, which I purchased from the App Store.
    Following a hard disk problem, I've reinstalled the laptop, used software update to get all the latest patches, and have recovered my files and applications from my Time Machine Backup. Unfortunately, Aperture is no longer able to open files from my Sony Nex camera ("Unsupported Image Format" message") even though it worked before I rebuilt my Mac, and is listed as supported under Aperture 3.4.5. I've done all of the "Repair permissions", "repair database" and "Rebuild Database" things, but it hasn't helped.
    I've tried to fix this by removing Aperture (in case my Time Machine backup version is in some way corrupted) and reinstalled from the App Store, but the App Store won't let me have Aperture anymore, even though I've paid for it, because my system is no longer compatible with the current version, 3.5. I can't see a way of downloading a full copy of the older version compatible with my system. I can see updates for Aperture listed at http://support.apple.com/downloads/#aperture, including Aperture 3.4.5, but these require a copy of Aperture 3.0 or later already installed to update, and even if I run the 3.4.5 update, it tells me it won't work because my copy of Aperture is from the App store.
    Can anyone help me find a way of navigating the App Store or Apple web site to get the copy of Aperture 3.4.5 I have licensed from Apple?
    Many thanks.

    @léonie
    Thanks for your help with this. I've downloaded the latest RAW support updates supported on my machine - V4.09 that seems to contain all of the RAW formats for previous updated including V4.06, which includes the NEX 3N, my camera. After a short while (there seemed to be some sort of background processing ging on in Aperture) it started to allow my NEX 3N photos to be viewed. Some of the thumbnails were corrupted, but if I made a slight edit in each of these files, the thumbnails updated and all was well.
    Prior to this, I raised a call with Apple, because the inability to reinstall software from the App Store that I've purchased from in App Store to a machine that supports OSX 10.7.5 and no later strikes me as a problem. I need to know that if my Time Machine backup fails and I need to reinstall, I've got somewhere I can go.
    The support people at Apple were very helpful, and it feels like they recognise this as a problem, and are working to resolve it behind the scenes. The App Store will not allow me to download the last version that works on my machine at the moment, but it sounds like Apple is thinking about how to do this. In the meantime, they are shipping me a copy of Aperture 3.0 on CD, and sending me a registration code. This will solve my immediate problem.
    This does make me wary about using the App Store for purchases in the future. I don't upgrade my hardware that frequently - I have no real need to as it just keeps working - and so not having physical copies of installation media for when the applications stop supporting my OS is a worry. On the face of it, maintaining prior versions of the software for older machines to download from the App Store seems like a reasonable solution, but they are not there yet, and there is no real commitment for them to do this. Anyone who doesn't back up their Apps in Time Machine (probably the majority of users) could loose them altogether when Apple moves on, and cuts app support for older OS versions.
    Thanks to @léonie and @Frank Cagianno for your help.
    Andy

  • How do I reinstall an OEM version of Photoshop Elements 6?

    I have recently upgrade my os to windows 7 and when i try to launch photoshop, i recieve a message informing me to delete and re-install the mentioned file. The issuse i have is that photoshop came pre-installed on my laptop so i dont have a hard copy to do so. I cant seem to find any re-download link anywhere so can someone point me in the right direction to reinstall it. Thank you in advance
    Message title was edited by: Brett N

    Sorry, but you have not understood me. No serial number forf PSE 6 can be entered into the trial to make it work like a purchased version.. You cannot use a serial number from PSE 6, any format of PSE 6, in any other version. Each new version number requires a new purchase. I was merely pointing out that while you can convert a trial of PSE 9, 10, or 11 into an activated version by entering a serial number for that version, you could not do that before PSE 9.
    In other words, the trial for PSE 6 is a trial only and always. The trial for PSE 7 is  trial only and always, etc. You had to uninstall the trial and install the bought version in all versions of PSE prior to PSE 9.

Maybe you are looking for

  • How do I find the total size of all my Music in iTunes 11?

    I'm looking to get a new iPod, either a nano or Touch, so I'm trying to find the total size of all of my Music. Since iTunes 11's interface is so different from previous versions, I don't see a way to view that.

  • How do i backup only 1 particular folder in Time Machine

    I dont know if this has been asked or not-frankly i just want to know because ive never even touched time machine before. I have a time capsule now at work and boss is telling me to backup my work to the time capsule using time machine. I keep hearin

  • How to assign tasks in Approval Workflow to a set of users selected from a Lookup table

    Hi all, I am new to Project Server and I am using Project Server 2013 On premises deployement. Please help me on how to achieve the below scenario: I have a requirement where, the initial PDP will have 2 fields (Reviewers and Approvers), wherein the

  • GeneratedReceiverChannel_HTTP

    Hi people In file2file scenario i am activated IR object that's ok,  i will able to activate in ID part, in that part what ever i created that object's(CC & ID IR SA RA that activating) and also coming GeneratedReceiverChannel_HTTP this will not acti

  • What are the minimum files needed?

    Under Windoz, can I simply copy the JAVA.EXE, the JAR files and the DLLs to a subdir (along with my CLASS file) and run my app? If not, then what would be the minimum required to do so? I'm trying to get away with not running the JRE install. If ther