How do I reinstall apps after doing a clean install on my MBP?

My 2009 MacbookPro is running slow and crashing every now and then so I want to do a complete erase and reinstall of the OS. I am running Snow Leopard but will probably upgrade to Lion afterwards but not until I have everything back up and running properly again.I have my TimeMachine backup and also have a second copy of the folders and files I will want to restore onto the clean system. I don't want to simply restore everything again from TimeMachine as that will probably just bring back all the icky stuff that was causing the slow down in the first place.
I have purchased some applications from the App store so they are currently showing "installed" instead of "Buy", so how do I reinstall them again to my fresh system? If I click on the button will it still download even though it says "installed", or if not, how do I do that?
thanks

Follow the instructions here >  Downloading past purchases from the App Store, iBookstore, and iTunes Store

Similar Messages

  • How do I import my address book after doing a clean install of Leopard?

    I just finished doing a clean install of Leopard and I realized that I forgot to export an Address book archive before erasing my hard drive. I still have all the Address Book files stored in Application Support in my Library (on my backup hard drive) but I don't know how to get those files into Address Book. Whenever I try the different import options they are all grayed out.
    I also have the Address Book files stored on my iPod Touch but syncing with my Touch doesn't seem to bring them into my computer. Is there anything I can do at this point besides entering them in one at a time?! Copying and pasting the files from the backup to the current folder doesn't seem to do any good either. It will tell me that the files I am trying to write over and in use. It says this even after I close Address Book.

    Ok, I got is to work by selecting the folder itself and copying it over. Aparently it does work if you open the folder, select all the contents and then paste it. I didn't think it would matter which way you did it.

  • After doing a clean install of Windows 10

    I am worried that if I do a clean install of Windows 10, I won't be able to re-install the pre-installed apps that were on the laptop when I purchased it. Afterward, will it still register as a Toshiba and allow me to re-install any/all of their programming? Thank you!

    What computer do you have?

  • How do i reinstall pages, after it failed to install due to network error ?

    I purchased page's from the app store, all seemed well, then i get a message on my screen telling me failure due to network error
    i then tried to go back to the app store to try a re install and the crummy thing is telling me it is installed 
    i have tried to get a solution by contacting Apple support, and that is useless , have searched to find a resolution but
    i haven't found a sound thread to my problem ...
    please some advise if you can
    Thank you Aid

    Why not try the App Store forum, Pages, and MacBook Pro.
    Mac App Store
    MacBook Pro
    Pages
    Apple - Support - Site Map

  • How can I restore my dock from a backup after doing a clean install?

    I restored the dock plist file as well as the db file (which I had to delete the original first, since it was "in use") but the standard dock remains.

    I haven't tried this myself, but I'm guessing that the Dock writes its settings back to disk when it quits, overwriting what's in the restored files. There are two ways you might work around this:
    Restore the files, then in the shell enter
    killall -9 Dock
    If that doesn't work, enter
    launchctl remove com.apple.Dock.agent
    Restore the files, then log out and log back in.

  • How do I reinstall Muse after accidentally uninstalling?

    How do I reinstall Muse after accidentally uninstalling.The apps download does not allow and reads as updated.

    Tehill which operating system are you using?  I would recommend reviewing the steps in CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html in order to reinstall Muse.

  • How to remove an app that does not have an X

    how to remove an app that does not have an X
    i.e.  stocks

    @greg1424
    Who needs newsstand ? It depends if you enjoy reading the newspaper or magazines in your spare time.  Back in the day, you find that small child delivering your morning newspaper.  You open the door, you found out that the next door neighbor stole your daily newspaper, now you have to buy a new one at the neighborhood deli.  Now Newsstand, fix that by delivering the news you love to your iOS device.  Drink some coffee, while flipping pages on your phone or iPad.  Guess what?  You saving the earth, no one stealing your paper and is available anytime you want.   Plus their subscriptions are cheap, so view the link to read more about it.
    Use Newsstand on your iOS device - Apple Support
    Is pages and numbers free?  Is free, you activated or purchased on or after September 1, 2013. Read the link below for more details
    Free Apple apps for your iPhone, iPad, and iPod touch with iOS 8 - Apple Support
    Cheers,
    Wilkie

  • How do I close apps after I have updated them? I have 30 apps saying open.

    How do I close apps after I have updated them? I have 30 apps saying open after I have updated them.
    IPin other words, all of my updates are still showing on the screen after they have been updated.

    The word 'OPEN' next to the name of the app doesn't mean the app is running. Instead, it is a button you can use to launch the App.
    If you don't do anything, then the list will eventually disappear on its own, along with all those buttons saying 'OPEN'.

  • How do I reinstall itunes after reformatting windows 8?

    how do I reinstall itunes after reformatting windows 8?

    If you didn't back up the library but have content on an iPod, iPhone, or iPad, see Recover your iTunes library from your iPod or iOS device.
    tt2

  • How do I reinstall Indesign after my hard drive has been deleted?

    How do I reinstall Indesign after my hard drive has been deleted?

    After getting a hard drive back in working order you can either reinstall the software using the disks if you purchased disks, or you can download your software as a trial version and use your original serial number to activate it. 
    If the software is the latest version you can download it from Adobe's product pages. 
    If the software is an older version you can download the trial version of the software using the link below and then use your current serial number to activate it.
    Be sure to follow the steps outlined in the Note: Very Important Instructions section on the download pages at this site.
    http://prodesigntools.com/tag/ddl

  • How do I reinstall CS6 after putting in a new hard drive?

    How do I reinstall CS6 after replaceing hard drive?

    I don'T HAVE A DISK. i THINK i HAVE THE CLOUD.
    In a message dated 11/19/2012 9:08:34 P.M. Mountain Standard Time, 
    [email protected] writes:
    Re:  How do I reinstall CS6 after putting in a new hard drive?
    created by John Waller (http://forums.adobe.com/people/John+Waller)  in 
    Downloading, Installing, Setting Up - View the full  discussion
    (http://forums.adobe.com/message/4860619#4860619)

  • HT5858 How do you close apps after the new apple update?

    How do you close apps after the new apple update?

    Double tap the home button and swipe upwards on the preview of the App (not the App Icon).
    http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf

  • After a Lion clean install, how do I retrieve my data from external back-up? Following Apple advice for use of Migration Assistant did not work creating similar issues leading to clean install.

    After a Lion clean install, how do I retrieve my data from external hard drive?
    Following Apple advice I used Migration Assistant which crashed new system twice which is why I had to clean install Lion in the first place.
    Is there a sure way of doing it?
    I have only a few programs that I will have to install myself and that should not be a problem.
    I just want my data, music and photos back where I can use them.

    Time machine backups. I went to migration assistant a few hours ago and limited my selection to "users", no need for applications, settings and other files.  Stuff started moving over at a fast pace but has now seemed to stall.
    I will let it run overnight as there are lots of songs and photos as well as a few movies.
    If that does not work, then I will go into TM and try restore. I have restored some things in the past such a mail files and it has worked well. 
    The Apple fellow at the store told me to go right into TM, he may have had a point. I'll get it eventually.

  • Is installing mountian lion the same as doing a clean install of an iOS

    is installing mountain lion the same as doing a clean install of an ios?

    Haven't a clue what an ios is, but reinstalling SL, Lion, or ML replaces all OS components and the basic Apple apps, such as TextEdit, Safari, Mail, and Terminal. What it doesn't do is touch any user data, settings, or other apps.

  • Could someone help me with instructions for doing a clean install for iMac with mountain lion 10.8.4 ?

       Could someone help me with instructions for doing a clean install for Could someone help me with instructions for doing a clean install for an early 2009 iMac 20"  with Mountain Lion 10.8.4 ?
       Thank You,
                                leetruitt

       Barney,  William,  nbar, Galt\'s Gulch:
       A nephew stayed with us to take a course at the local community college last semester. I allowed him use of my mac for research just after I installed Mountain Lion. He decided to "help out" and ran a 3rd party clean and tune up app., Magician.  The tune up wiped over 1200 titles of my music in iTunes,  also a path of folders with names containing nothing but more empty folders with names. Almost every program I open and run for a short time crashes, also folders and programs are in wrong places, or cannot be located (the nephew, for instance). Up to this time I have always been able to track a problem far enough to resolve it by careful persistence and good luck, but I do not have the tech savvy to solve this one without getting in deeper. I have run disk utility saveral times and always get  variations of this:
    ACL found but not expected on
    "private/etc/resolve.conf"
    "private/etc/raddb/sites-enabled/inner-tunnel"
    "private/etc/rabbd/sites-enabled/control-socket"
         Also, after four years of intense daily use it is cluttered with much junk,  and every app that I was curious about, and I am a very curious guy.
       So I know my limits, (and now my nephew). I dumped my pc for a Strawberry iMac a few years ago, and so far every problem I've encountered, or brought on myself, the Mac has resolved with its own inner elegance - in spite of my novice bungels - and now I honestly feel ashamed, in addition to the need to apologize to a machine for allowing a peasant into the Royal Grounds - so I am calling the Wise Ones in for this one.
       Crazy, I know, but to me a Mac represents something far beyond the ordinary  input ➛ process  ➛ output  title/function customarily assigned to a machine - I sense an odd kind of morality involved, one that I need to respect.
        So, these are my reasons for wanting to do a clean install, correctly.
            Thank you,  Truitt

Maybe you are looking for

  • Inactive Items Report

    I would like help writing a query similiar to the inactive items report except i need to show components that have not had any transactions in the past 24 months. i figured i can query the oinm table but not sure how to write this query. thanks, Rich

  • How to divide in folde

    I just bought a Zen micro, because I have a lot of audio books on MP3. The audio books are divided in cds, directories, and tracks, e.g. cd, cd2, cd3, the tracks are numbered as 00.mp3, 002.mp3 etc. etc. I looked for about one hour, but I cannot find

  • Is it possible to pass a field symbol as parameter from any method of view?

    Hi Is it possible to pass a field symbol as an importing parameter to teh globally declared attribute??

  • When opening flash cs4 fla file it crashes flash cs4 and asks to reopen

    Application Basics Name Firefox Version 4.0 User Agent Mozilla/5.0 (Macintosh; Intel Mac OS X 10.6; rv:2.0) Gecko/20100101 Firefox/4.0 Profile Directory Show in Finder Enabled Plugins about:plugins Build Configuration about:buildconfig Extensions Nam

  • PI Monitoring Dashbord

    Hello All, I have a question if there is a way to see the status of a com channel whether it be a dashboard or something automated with out having someone physically checking and then have it displayed on a web page or portal page that could be kept