How do I reinstall CS2 on Windows 7?

I had to reformat a HD and reinstall Windows 7 and all my applications. When I try to re-install CS2, I get two problems. It doesn't let me install into its default folder (C:\Program Files (x86)\Adobe). There is a message that illegal characters are present in the file path. I believe that it was installed there initially (computer was purchased with Windows 7 - not an upgrade). I did install in the Program Files folder but it will not let me activate the program and says my 30 day trial is over so the program doesn't even give me a chance to enter anything.
Any suggestions?
Thanks.

There is a message that illegal characters are present in the file path.
Language and region settings --> Default language for non-Unicode programs. Check it. For the activation issues simply contact support.
Mylenium

Similar Messages

How do you reinstall 64-bit Windows 7 in UEFI mode?

I have a PC with a single hard disk and, a while ago now, I installed 64-bit Windows 7 on it in UEFI mode.
The disk has two primary partitions: a C: partition which contains my Windows 7 system and other installed software such as Office, and a D: partition which contains only personal data.
(In other words, I don’t have a multi- or dual-boot system.)
I now wish to reinstall 64-bit Windows 7 into the same C: partition, again in UEFI mode.
There is a procedure for reinstalling Windows 7 documented on the following MS Web page:
http://windows.microsoft.com/en-us/windows/installing-reinstalling-windows#1TC=windows-7
in the section entitled “Using the Custom installation option without formatting the hard disk”.
The following YouTube video demonstrates this procedure:
http://www.youtube.com/watch?v=fr_s29MWOA0
and it looks relatively straightforward.
Essentially, the re-installation starts by inserting the installation DVD into the optical disk drive and running setup.exe while still logged on to Windows 7 with an administrator user ID.
At the screen entitled “Where do you want to install Windows?”, both the System Reserved partition (the example in the video is a legacy BIOS installation) and the C: primary partition are visible.
On that screen, you simply select the C: primary partition and click
Next, and Windows 7 is effectively reinstalled over Windows 7.
Any personal data in the C: partition is preserved in a folder called Windows.old.
The big question is, does this procedure work for a UEFI installation?
The documentation does not state that it works only for a legacy BIOS installation.
If I were to follow the procedure, when I reach the screen entitled “Where do you want to install Windows?”, I would expect to see the EFI System Partition (ESP), the Microsoft Reserved Partition (MSR), my C: primary partition and my D: primary partition.
Can I simply select the C: primary partition and click Next to start the (re-)installation?
It appears that nowhere in the procedure do you specify what mode of installation (legacy BIOS or UEFI) is required.
Does the installation setup simply use the same mode as that of the existing installation?
Does anyone have any experience of reinstalling Windows 7 in UEFI mode, using this procedure or any other method?

Hi,
It depends. Do you have Windows 7 DVD? Does your computer have a Boot from EFI Drive option?
Windows 7 DVD can boot in either BIOS mode or UEFI mode. Different UEFI firmware implementations support different methods for handling the installation operation. The processes for booting the computer into UEFI mode for the Windows product DVD are
the same. If you can find a boot from EFI Drive option, please perform the suggestions as i referred to.
If you cannot find any boot option, perform the steps below:
Use Device Manager's Firmware option and select Boot from EFI Internal Shell.
Use the EFI internal shell, as follows:
Start the EFI internal shell from the EFI boot menu and select the drive with the Windows product DVD. The following example assumes that the drive is Fs0:
Shell> Fs0:
Start the EFI boot application. For example, on an x64 system, run the following command:
fs0:> \EFI\BOOT\BOOTX64.EFI
After the application starts, you may be immediately prompted to press a key to boot from the drive to continue. Press a key to continue booting from the installation media.
Andy Altmann
TechNet Community Support

How to install PS CS2 on Windows 7 64 bit???

Please do not advise me to buy or upgrade to CS4, 5, or 6 PLEASE!!!
I've read that there's a definite way to install CS2 (or any 32 bit version of PS) on Windows 7 64 bit successfully with some folder code "C:\progra~2\adobe" or... C:\program~2\adobe...or the same code but with the back slashes in the opposite direction like /.
I'm totally confused: why does the first code say "progra" and leave off the "m" and other say to spell out "program" entirely?
WHICH is correct "progra" or "program" and which way should the slashes go?
I'm very untechnical and don't understand how to do this at all so can someone please explain the install procedure in specific clear steps from inserting the CD to the end?
I saw a member named Marian Driscoll post about this install but don't understand how to do it each step of the way.
I need a new PC and was thinking I would be forced to get a used Windows XP machine to use CS2 but would prefer to get Windows 7 64 bit but won't unless I can install PS CS2 on it successfully.
Can someone please help with detailed install instruction using this floder code?
Thanks so much, I'm desperate!!!

Guys, I appreciate the irritation, but as the Original Poster asked for clear, detailed and plain English explanations for every step from inserting the install disc and on from there I can see why they're lost with such accurate but efficient explanations.
OP, in case you are still looking for support:
1. Insert your CS2 CD, open Windows Explorer, navigate to Computer and then to the drive for your CDs (usually labelled D: or similar), right click it, and choose to Open or Explore.
2. Create a temporary folder on your desktop. Call it something like TempCS2.
3. Find the installing program, usually called setup.exe, and copy that to your temporary folder. If you want to be sure, copy all the contents of the CD to that temporary folder.
4. Right click on setup.exe in your temporary folder.
5. Select "Properties".
6. Click on the tab that says 'Compatibility' in the box that pops up.
7. Click 'Run in Compatibility Mode' and a menu will drop down - from that menu, choose the option 'XP SP2' (Windows XP Service Pack 2). Your Windows 7 computer has now been told to recognise the program as one made for Windows XP (which it is). Also tick the 'Run as Administrator' checkbox at the bottom.
8. Click OK on each box so that all these settings are saved.
9. Now, run (double click) setup.exe FROM YOUR TEMPORARY FOLDER, ie, the one we've made all the changes to, and it should hopefully work properly and start the installation wizard.
10. When you get to the point in your installation wizard's window where it asks you to choose where to install your product, THAT is your INSTALLATION PATH. You need to change it from C:\Program Files (x86)\Adobe to C:\Progra~2\Adobe and it will install in the Program Files (x86) location. That's it!
If you are interested, the reason for this is that CS2 is very old software and does not recognise paths (locations) with certain characters in the name like the ( ) brackets in Program Files (x86). We therefore have to use an alternate name for the location, that is, an alternate path. Progra~2 is an 8-character abbreviation for Program Files (x86): the ~ signifies the remainder of the folder name to the computer, and the 2 is simply a record of where the folder falls in the order of all those folders in C:\ which start with 'Progra'. Since you're using Windows 7 64 bit, you have another folder just called Program Files that holds all your 64 bit capable programs: the folder you need is Program Files (x86), the second one down, hence 2. This way, the installer has a path name that it can recognise, and the program is installed in the correct location, rather than in a location which will try to open it with 64 bit architecture instead of the 32 bit architecture that it can handle. Using Compatibility to get Windows to treat it as an XP program allows some aspects of the CS2 suite to work more smoothly and also helps with installation.
If the above doesn't help then I'm sorry but I can do no more for you - I don't have the CD myself to test with!

How can I reinstall CS2 after not uninstalling properly?

I hope someone can help me since after being on the phone with Adobe for almost 3 hours, they told me they don't do 'support' for CS2 anymore.
I bought CS2 and registered it about 4 years ago. I've had it installed in the same computer ever since.
Just recently I had virus problems and Dell re-set my computer back to factory settings. The Geek Squad backed up all my photos and documents, but I have to re-install all the software.
I installed CS2 and the last step was to put in my serial number, which I did. I got a message insinuating that I didn't have a legit copy. I called Adobe, and they told me that it was the correct number. But, they flat out refused to give me any 'technical help' as to why I can't complete the installation.
I read some of the questions here and am now thinking I was supposed to have uninstalled the software. But I didn't. So, it must be looking like I'm someone else trying to get the program for free. I just don't know.
Please, please help me. I'm not awfully computer literate and I'm totally stressed out from all that has happened with the computer.
Thanks much for any advice!

Here's an update on my CS2 "reinstall" problem. I didn't have to reinstall!
I tried to no avail some of the suggestions you all kindly sent. I hesitated to deinstall or replace folders from the CDs, but rather took a look on the Web for information. I found a useful hint at (http://www.justskins.com/forums/reinstallation-problem-128281.html). Though the article was about CS3, I realized that my problem might have resulted from a corrupt preferences file. I followed the suggestion to create a new XP user account. IT WORKED; that "new user" could immediately use all my CS2 products without reinstalling. One exception was that Illustrator would start and then just disappear, but "new user" was able to reinstall it from the CDs with no problem. My original XP user account still cannot use CS2 or reinstall. My next step will be figure out how to fix the original XP user, and then reinstall FlashPlayer 10 to see if it reproduces the original problem.
After going through all this, I remembered that once long ago Adobe Support helped me fix a corrupt preferences file without creating a new XP user account. I searched the Knowledge Base, and though I could have missed it, I didn't find any related info.
Thanks again and cheers, KvF

How to reinstall itunes without windows error 2

how can i reinstall itunes without "windows error 2"

Ah iTunes, how you make me lose my hair.....
I got it working, but not before it imported all of the wrong stuff. I set the Media Folder to precisely what I wanted it to import (all of my daughter's Top 40 songs), and then found the Music option "Add MP3 and AAC Files from your folder". That seemed to be the correct option, so I clicked it. Unfortunately, it didn't just stick to my folder, but went off on its merry way adding any song from any folder. It dumped hundreds of ACDC and Aerosmith songs into iTunes (neither band is particularly stingy with F-bombs on live albums) into my daughter's list of teeny bopper titles. When I tried to remove them from the iTunes library, it put up a scary warning that if I removed those songs it would delete them from every iDevice within a 5KM radius.
There doesn't seem to be any way within iTunes of removing all songs from a particular folder or hard drive directory, which would have been nice. In fact, I can't figure out how to show the filename anywhere within iTunes (isn't that a bit odd?). So I manually removed the 2K songs it had imported, which took a good hour. Then I found the File - Add Folder to Library option, and that one allowed me to select the folder I wanted to import. I hate to say it, Apple makes great hardware products, but iTunes seems to come from an entirely different planet.

How do I reinstall Acrobat 8 Standard on Windows 7? [was: Reinstall]

Just got a new computer with Windows 7. How do I reinstall my Adobe Acrobat 8 Standard?

if you need the installation file, contact the reseller that originally sold acrobat 8 std to you.
if otherwise, explain the problem.

How do i uninstall CS2 - the old version doesn't open on my macbook pro i am reinstalling an updated version

how do i uninstall CS2 - the old version doesn't open on my macbook pro i am reinstalling an updated version

You simply trash it.
Mylenium

How do I reinstall iTunes 11.1.4 and Quicktime to Windows 7 PC?

I have noticed a fair number of users being unable to reinstall 11.1.4 by iTunes after deinstalling due to errors from the update. I have attempted to reinstall several times but the download installation never shows up on the desktop even though the welcome comment from the manufacturer thanks me for installing the product.
How do I reinstall iTunes and Quicktime and actually get the product back to my PC for use? I am using Windows 7 and have been a supporter of the iTunes for several years and would appreciate being a happy customer again! Thank you.

I have attempted to reinstall several times but the download installation never shows up on the desktop even though the welcome comment from the manufacturer thanks me for installing the product.
Try downloading an installer from the Apple website using a different web browser:
http://www.apple.com/itunes/download/
If you use Firefox instead of IE for the download (or vice versa), do you get a working installer?

How do you reinstall elements 12 in windows 7 ?

My elements 12 program is corrupt how do I reinstall the program

Press Ctrl+Alt+Del and go to Task Manager
Select the Applications tab. If Elements is still shown as running, highlight and click End Task to force quit.
You can use the link below to download PSE12 if you have your product serial number. It’s probably best to uninstall first by going to the Windows Control Panel.
http://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-10-11-downloads.html

I would like to thank JJMack for his response to my discssion of 9 6 14, 8:43 pm regarding difficulty with downloading photos to PS CS2 in Windows 7 I don't know how to reply as I am new to the Forum.

regarding difficulty downloading photos from camera to PS CS2 in Windows 7. I don't know how to reply as I am new to this forum.
Thank you,
Elena de la Vega

How can i reinstall itunes 10.5.2 on windows xp, after i deleted the older version? help please!

it's been painfull not to get the answer for this issue, since i did update every single apple features that works with my pc windows xp, thi's the 1rst time that i have this problem! anyone out there can help pleeeaasseee?????

"how can i reinstall itunes 10.5.2 on windows xp, after i deleted the older version?"
Go to apple.com/itunes/download
Download the current version.
Install it.
When installing, are specific errors being generated?

I install windows 7 on my mac pro. and participate in windows 7 to 50gb 2 disk. but now i cannot enter my mac. only windows is appearing what should i do. when try enter my mac want me to format rest of disk. how can i reinstall my mac

i install windows 7 on my mac pro. and participate in windows 7 to 50gb 2 disk. but now i cannot enter my mac. only windows is appearing what should i do. when try enter my mac want me to format rest of the disk. how can i reinstall my mac?

If you use Windows program to partition the Hard Drive, the Apple partition gets destroyed.
Windows does not understand it is a guest on your Mac, and throws garabge wherever it pleases.

How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

How Can you reinstall Photoshop Elements12 to a computer that its was there but loss it after installing windows 8.1

Reinstalling Mavericks depends on several factors:
if you erased your recovery partition
what OS originally came on your Mac.
I'll assume you don't have a backup available that you made before your mishap, because you didn't mention it.
That's really the take home message here: have a backup!
If you still have your recovery partition:
boot into the recovery partition (command R at restart)
use the recovery partition to reinstall Mavericks. see: OS X: About OS X Recovery
if you do not still have your recovery partition, then it depends on whether your Mac originally came with installer disks or not.
If it originally came with installer disks, you would boot from the installer disks, erase your HD, and then reinstall the OS that is on the installer disks, and then upgrade as necessary until you get to Mavericks.
If your mac did not originally come with installer disks, but you managed to erase your recovery partition, then you can try to boot into internet recovery (option-command-R at restart), and use internet recovery to erase your HD and reinstall the OS that originally came with your computer, and then upgrade to Mavericks if you need to. See: Hands on with Mountain Lion's OS X Recovery and Internet Recovery | Macworld
(the reference refers to ML but it applies just as well to Mavericks).

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back

Hello, I have mistakenly deleted all partitions on my mac while trying to install windows on my macbook pro, how do i reinstall the mac os back. I just wanted to have them both, please help. thank you in advance

Install Mavericks, Lion/Mountain Lion Using Internet Recovery
Be sure you backup your files to an external drive or second internal drive because the following procedure will remove everything from the hard drive.
Boot to the Internet Recovery HD:
Restart the computer and after the chime press and hold down the COMMAND-OPTION- R keys until a globe appears on the screen. Wait patiently - 15-20 minutes - until the Recovery main menu appears.
Partition and Format the hard drive:
1. Select Disk Utility from the main menu and click on the Continue button.
2. After DU loads select your newly installed hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
3. Under the Volume Scheme heading set the number of partitions from the drop down menu to one. Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed. Quit DU and return to the main menu.
Reinstall Lion/Mountain Lion. Mavericks: Select Reinstall Lion/Mountain Lion, Mavericks and click on the Install button. Be sure to select the correct drive to use if you have more than one.
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

My Bluetooth disappeared from my MacBook. How do I reinstall? That was my question, I recommend intalar MAC OS X 10.5 Leopard, but would have to format the MAC to have bluetooth, but I ended up installing snow leopard and windows 20011. I'll install Windo

My Bluetooth disappeared from my MacBook. How do I reinstall?
That was my question, I recommend intalar MAC OS X 10.5 Leopard, but would have to format the MAC to have bluetooth, but I ended up installing snow leopard and windows 20011. I'll install Windows 2011 with the same key? Why does the snow leopard has not fixed the bluetooth?

Download and install this update combo. This update combo for Snow Leopard can bring any version of Snow Leo up to 10.6.8 with the lastest version of App Store for Snow Leo.
OS X Snow Leopard 10.6.8 v1.1 update combo
http://support.apple.com/kb/DL1399

How do I reinstall CS2 on Windows 7?

Similar Messages

Maybe you are looking for