How do I reinstall CS6 and all its components?

How do I reinstall CWS 6 and all its componentsd?

This is a public forum so there may be a delay in response.
In order to advise you on how to uninstall Creative Suite 6 can you please respond with the operating system you are using on your computer?

Similar Messages

How Do You UNINSTALL ITUNES And all its Components..

Hi can you help me.
after spending a solid 24hrs trying to get my itunes to recognise my ipod
after upgrading it says software missing!!!
tried a suggestion or 2 but I cannot get it to link up
I AM VERY UPSET
and have decided to remove itunes from my pc and start all over again..
Can you help me??
Thanks for reading
Andrew Carrington

Gah! Well at least it's not just me ;-))
Not to worry, I guess they'll let us in sometime soon hopefully. In the meanwhile, I'll keep on sticking profiteroles thru the letterbox in the hope that such goodies will pacify the Discussions hounds guarding the doormat...
Kind regards,
Gopha.

How to completely remove safari and all its files?

I have Windows Vista and I need to COMPLETELY remove Safari and ALL its files. It is important that it is completely removed, and I've already tried simply uninstalling (from "uninstall a program" in the control panel)it but it doesn't get rid of EVERYTHING safari. I think some of the files are damaged or something because Safari won't open. How would I do this?
Message was edited by: Friends of Apple

Just go into Control panel and Uninstall programs. Select Safari and select uninstall.

How to properly remove e17 and all its dependencies?

Hello,
I installed a while back e17 and would like to do some clean up...
Could someone confirm if all the below package (except notify-sharp-svn) are indeed e17 ones?
[10:30:54][root@phusis]
[/home/lcoumetou]Arch64# pacman -Qe | grep svn
e-modules-extra-svn 41098-1
e-svn 41080-1
e_dbus-svn 41042-1
ecore-svn 41085-1
edje-svn 41103-1
eet-svn 41307-1
efreet-svn 41084-1
eina-svn 41100-1
elitaire-svn 40502-1
embryo-svn 41042-1
emprint-svn 40505-1
engrave-svn 40228-2
entrance-svn 41032-1
epsilon-svn 40978-1
esmart-svn 41098-1
etk-svn 40990-1
evas-svn 41104-2
ewl-svn 41096-1
exhibit-svn 41086-1
exml-svn 40505-1
notify-sharp-svn 3032-1
Is there an easy to remove e17 and all its dependencies or do I have to do it manually for each package?
Thanks in advance
Ludo

Thanks!
The following did the trick:
[11:28:41][root@phusis]
[/home/lcoumetou]Arch64# pacman -Rcsn e17-svn e17-extra-svn
e17-svn not found, searching for group...
:: group e17-svn:
e-svn e_dbus-svn ecore-svn edje-svn eet-svn efreet-svn eina-svn
embryo-svn evas-svn
Remove whole content? [Y/n]
e17-extra-svn not found, searching for group...
:: group e17-extra-svn:
e-modules-extra-svn elitaire-svn emprint-svn engrave-svn entrance-svn
epsilon-svn esmart-svn etk-svn ewl-svn exhibit-svn exml-svn
Remove whole content? [Y/n]
checking dependencies...
Remove (21): exhibit-svn-41086-1 etk-svn-40990-1 entrance-svn-41032-1
engrave-svn-40228-2 elitaire-svn-40502-1 ewl-svn-41096-1
esmart-svn-41098-1 e-modules-extra-svn-41098-1 exml-svn-40505-1
epsilon-svn-40978-1 emprint-svn-40505-1 e-svn-41080-1
efreet-svn-41084-1 edje-svn-41103-1 embryo-svn-41042-1
e_dbus-svn-41042-1 ecore-svn-41085-1 evas-svn-41104-2
eet-svn-41307-1 eina-svn-41100-1 libmpd-0.18.0-1
Total Removed Size: 61.74 MB
Do you want to remove these packages? [Y/n]

How to print the Form and all its attached files

Hello,
I have a form created with Designer 7.0.7. I have extended the form to allow the data to be saved with the form, allow attachments, and allow printing of the form. What would like to do is to add a button to print the from and all of its attached files. If anyone has any samples I would greatly appreciate them.
What I really needed to do was to insert/append a PDF file but this is not supported by the designer.
Thanks,
-Yolanda

Hi Yolanda,
I need to do the same in my form. Would you mind let me know if you found any solution. Appreciate if you can share some code.
Thanks in advance,
SekharN

Zoom JPanel and all its components

Folkses,
I have a JPanel which contains a lot of different components, containers with components, etc.
The components are either images or drawn 'by hand' (overwritten paintComponent).
Is there a simple way of zooming in/out to get the whole picture larger/smaller? I know Graphics2D.scale() but I'm hestitant to implement this in each and every component of my JPanel.
Thanx,
Thomas
PS: searching the forum I only found answers on zooing images...

Hello camickr,
I am also very much interested in this.
Well, you can create an image of a panel and then zoom the image.But I think this will not increase the components' bounds and components would not respond mouse events etc. correctly. Am I right? Then, what is the way of zooming such that all the components respond to events correctly.
I hope you have done something like this before and help us.
Thanks!

How do I uninstall iphoto and all its contents and then reinstall?

For the last few years i have been deleting my photos from iphoto incorrectly which has resulted in many modified versions which has clogged up my HD, so i want to completely uninstall my whole iphoto application, before i reinstall it.
if you could tell me how to do that, that would be great
cheers
j

Welcome to the Apple Discussions.
Removing the application and re-installing it will not solve the problem you describe:
i have been deleting my photos from iphoto incorrectly which has resulted in many modified versions which has clogged up my HD
That's a Library issue. The library is quite separate from the application.
If you have unattached modifieds then I would suggest that you don't need to start over, but rather use iPhoto Library Manager to rebuild the Library. This will create a new Library preserving much of the work you've already done - albums and wanted edited versions and so on, and leave behind the unattached files. Then you can trash that old Library.
If you really want to slash and burn:
To create and populate a new *iPhoto 09* library:
Note this will give you a working library with the same pictures as before, however, you will lose your albums, keywords, modified versions, books, calendars etc.
In the iPhoto Preferences -> Events Uncheck the box at 'Imported Items from the Finder'
Move the iPhoto Library to the desktop
Launch iPhoto. It will ask if you wish to create a new Library. Say Yes.
Go into the iPhoto Library (Right Click -> Show Package Contents) on your desktop and find the Originals folder. From the Originals folder drag the individual Event Folders to the iPhoto Window and it will recreate them in the new library.
When you're sure all is well you can delete the iPhoto Library on your desktop.
Regards
TD

[REQUEST] update ibus and all its components

ibus 1.3.9 is released 9 months ago, so it is quite old.
could any TUs and DEVs update the ibus branches to git version on github?
It has quite a lot of bug fixes.
I think ibus is important because gnome is going to integrate it in 3.2. I really want to see several testing builds just like other important packages.

Usually, we stick with stable release for the packages in the repo. There are exceptions but the problem with ibus is that it's orphaned so no-one want to take the responsability in case the unstable release has problems. I took a look and some of the ibus stuff have newer stable release so I'll update them. There are also unstable releases which help a bit since you don't need to worry about choosing the correct git snapshot, but I'll need to see what other distro are doing. As I don't use ibus, I don't want to introduce new problems.

How can I save a page and all its component parts in a single file, like IE does as an MHT - it's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)

how can I save a page and all its component parts in a single file, like IE does as an MHT?
It's much easier for mailing to people where page address not available?? (as in output from an airline booking site, for example)
It is simply too painful to have to zip everything up into a single file to send. MHT format has been available for years now from IE, and with every new FF release it's the first thing I look for. I have been using FF for years, and hate having to come out of it, over into IE |(which I even took out of startup) and key everything in again, in order to send somebody something in a convenient format that they can open with a single click.
I can't believe this hasn't been asked before, so have you looked at it and rejected it? Have MS kept the file format secret?
Thanks
MG

This is not really an answer just my comments on your question.
I am sure I recollect efforts being made to get mhtml to work with FF.
Probably the important thing to remember about .mhtml is that if other browsers do support it they may need addons, and may not necessarily render the content correctly/consistently.
There are FF addons designed for archiving webpages, you could try them, but that then assumes the recipient has the same software.
You could simply save the page from FF to your XP pc; then offline open it with and save it using IE, before then emailing using FF, and attaching the .mht or mhtml file that you have now created on your PC.
As an alternative method, in some cases it could be worth considering taking a screen grab of the required page, then sending that to the recipient as a single email attatchment using either a bitmap or jpeg file format for instance.
Something such as an airline booking may be designed with a print option, possibly it could be worthwile looking at sending the print file itself as an email attachment.

How to run the Oracle SOA Suite and all its prerequisites on different mach

Greetings,
Due to the difficulty to run the SOA Suite and all its prerequisites, including JDeveloper, on a single machine, I would like to deploy the admin server, the soa server and the bam server on separate machines. Is it possible and, if yes, how ?
Kind regards,
Nicolas

yes.
You can just install db + rcu + wlst + soa on 1 machine. After that you middleware should be up and running.
Now you can install jdeveloper + soa extensions on your client and connect to the remote location of the soa server
or did i misunderstood you ?

I had Creative Suite 6 Design and Web Premium Win ESD on my computer, I had to have my computer reset to like a new computer, how do I reinstall CS6 back on my computer?

I had Creative Suite 6 Design and Web Premium Win ESD on my computer, I had to have my computer reset to like a new computer, how do I reinstall CS6 back on my computer?
Thanks,
Mel

you need your serial number and the installation files.
Downloadable installation files available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4, CS4 Web Standard | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
Lightroom: 5.7.1| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5.5, 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.

HT5527 I have had my storage reduced once already. In the process they removed my "Save" mailbox and all its contents. I do notcare about contents so much as starting a new Save box. How? (OS X 10.7.5)

My iCloud storage is being reduced. I have already had it reduced once. In the process they removed my "Save" mailbox and all its contents. (One would think that that would be the last thing they removed. But they took that and the "Trash" mailbox, yet left several thousand old and read messages which were in my "Inbox".) I do not expect to get the "Save" contents back, but I would like to restore the "Save" mailbox, so that I can start from scratch saving msgs in it again. But I cannot figure out how to do that. When I go to "Mailbox" on the top line (between View and Message) and select New Mailbox I get a dialog box in which I can name a new mailbox. When I type Save, for the name of the new Mailbox I get a response; "The mailbox 'Save" already exists." But I cannot find it.
Thanks, Bill Burner

Option 1
Back Up and try rebuild the library: hold down the command and option (or alt) keys while launching iPhoto. Use the resulting dialogue to rebuild. Choose to Repair Database. If that doesn't help, then try again, this time using Rebuild Database.
If that fails:
Option 2
Download iPhoto Library Manager and use its rebuild function. (In Library Manager it's the FIle -> Rebuild command)
This will create an entirely new library. It will then copy (or try to) your photos and all the associated metadata and versions to this new Library, and arrange it as close as it can to what you had in the damaged Library. It does this based on information it finds in the iPhoto sharing mechanism - but that means that things not shared won't be there, so no slideshows, books or calendars, for instance - but it should get all your events, albums and keywords, faces and places back.
Because this process creates an entirely new library and leaves your old one untouched, it is non-destructive, and if you're not happy with the results you can simply return to your old one.
Regards
TD

I use to have a cc membership which I discontinued and I reinstalled cs6 and now I can not open cs6 without the renew subscription window poping up. How can I still use cs6?

I use to have a cc membership which I discontinued and I reinstalled cs6 and now I can not open cs6 without the renew subscription window poping up. How can I still use cs6?

Sign in, activation, or connection errors | CS5.5 and later
Mylenium

I am about to replace my hard drive. How can I reinstall forefox and still keep all my bookmarks and other related information.

Question
I am about to replace my hard drive. How can I reinstall firefox and still keep all my bookmarks and other related information

Profile is a folder which store all your personal data in a safe place
* https://support.mozilla.com/en-US/kb/Profiles
* here explain how to backup profile https://support.mozilla.com/en-US/kb/Backing%20up%20your%20information
* here explain how to restore it
https://support.mozilla.com/en-US/kb/Recovering%20important%20data%20from%20an%20old%20profile

How do I reinstall CS6 Extended 64-bit after replacing hard drive and OS?

How do I reinstall CS6 Extended 64-bit after replacing hard drive and Windows 7 64-bit OS?

You can download the trial installer directly. Find the appropriate link below.
You must be on a trial download page to use the links, otherwise you get an error message.
For example, load the following page: http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements&loc=us
before pasting the link into the address bar.
http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.7z
http://trials2.adobe.com/AdobeProducts/PHSP/13/win32/Photoshop_13_LS16.exe
You need to kepp both files downloaded into same folder and after download click on .exe file to extract .7z

How do I reinstall CS6 and all its components?

Similar Messages

Maybe you are looking for