How do I reinstall MSVCR71.dll?

I have a HP Pavillion HPE 1012cb - I was uninstalling some unwanted programs and then when I rebotted, there was the above MSVCR71.dll missing - how do I reinstall this back into my system?
This question was solved.
View Solution.

Hi Tika,
If you haven't already done so, I would try checking your recycle bin first, to see if you can restore the file from there. If you need help in restoring the file from the recycle bin, take a look at this article: Recover files from the Recycle Bin. Let me know if you've already tried this or if it works for you. If you need further help, please let me know, and I will see what I can do. Best of luck to you.
Ryan1216
I work on behalf of HP
The advice and opinions given here are my own and not those of HP

Similar Messages

  • How do I reinstall PNCRT.DLL?

    How do I reinstall PNCRT.DLL?  
    Thank You!

    Hi,
    Did you receive any error message that shows that you need to install the Pncrt.dll?
    When did the error appear?
    In some cases, pncrt.dll errors could indicate a registry problem, a virus or malware issue or even a hardware failure.
    If you receive the message when using a program, just like the above MVP said, reinstalling the program should fix the issue.
    If you receive the message in other scenarios, please refer to the steps in the following article.
    How To Fix Pncrt.dll Not Found or Missing Errors             
    http://pcsupport.about.com/od/findbyerrormessage/a/pncrt-dll-not-found-missing-error.htm
    Please note: since the website is not hosted by Microsoft, it may be changed without notice, Microsoft does not guarantee the accuracy of the message.
    Hope this helps,
    Ada Liu
    TechNet Community Support

  • Sqldeveloper installation trouble shootings = can't start because MSVCR71.dll is missing from your computer

    I cannot install sqldeveloper due to the error received: can't start because MSVCR71.dll is missing from your computer "can't start because MSVCR71.dll is missing from your computer". I have Windows 7 and jre installed and first time I have have installed the same sqldeveloper, but after I have tried to installed data modeler, sqldeveloper run in error. I have deleted first sqldeveloper that successfully being installed and then when try to reinstall the installation failed with the reason: "can't start because MSVCR71.dll is missing from your computer...". A new error occured after reinstallation: "Unable to launch the Java Virtual Machine located path...\..\jdk\jre\bin\client\jvm.dll""Please tell me if you have a clue how to fix it and install both sqldeveloper and data modeler. Thank you for your time to reply to my question. Best regards!

    I researched the advice on the link provided by b noir as well as very similar advice from apple support: http://support.apple.com/kb/TS5376. It worked for me (for now).
    Some things of note:
    I did all of the things requested by the link I provided
    My computer WOULD NOT uninstall Apple Mobile Device Support. I had to manually remove the folder (also as instructed by the url)
    I also uninstalled MobileMe. Was a little different than removing the other apps. Follow instructs provided here: http://support.apple.com/kb/HT2992
    I did not uninstall iCloud
    I have to admit it was a bit scary removing all those things. Is important to note that when re-installing Apple, follow steps to do so as Administrator (the right-click thingy and whatnot).
    Hope this helps!

  • Encountered SQL Developer Error 'Can't Start because MSVCR71.dll is missing

    Hello,
    Thanks for looking at this entry
    I have an older version of SQL developer and it suddenly won't run with the following error
    'Can't Start because MSVCR71.dll is missing from your computer. Try reinstalling the program.........'
    And it is indeed missing. So, rather than download what might be a virus from the internet (new version of MSVCR71.dll ), I tried to do a new install of SQL developer from:
    http://www.oracle.com/technetwork/developer-tools/sql-developer/downloads/index.html
    I put it on my D drive, unzipped and tried to launch.
    It asked where I had java.exe (full path name). I found it at C:\Windows\System32\java.exe
    Now I encounter: Cannot find J2SE SDK installed at path C:\Windows\System32\java.exe
    Please help
    Regards
    Bill

    Hi,
    The 32-bit and 64-bit Java 7 JDKs include only msvcr100.dll, 32-bit Java 6 includes only msvcr71.dll, and 64-bit Java 6 has neither!
    Also, keep in mind that Java 7 is not certified yet for ANY* version of SQL Developer. The standard recommendation is to install the latest update in the Java 6 JDK code line (currently 1.6.0_45) and use that. Make sure to get the 32-bit version!
    Regards,
    Gary
    Edited by: Gary Graham on Apr 24, 2013 1:15 PM
    Corrected which Java downloads actually contain the msvcr71 and msvcr100 DLL versions. Sorry for messing it up the first time!

  • Missing MSVCR71.dll Error Message During Launch

    I just wanted to pass along an error message that I have found the solution to and have passed onto Adobe through the bug submission process.
    I have discovered a QuickTime Component that causes Adobe Encore CS5 to give an error message during launch.  The Error message states “The file MSVCR71.dll could not be found. Please reinstall Adobe Encore to resolve the problem” (Well, it is something really close to that.  I did not write down the error message before fixing the problem).  There is an “OK” button below the message to continue loading Adobe Encore.
    The error message is only displayed if all other CS5 programs are closed.  During my findings, I discovered that if you open Adobe Encore CS5 through Premiere Pro CS5 or After Effects CS5 by using Dynamic Link, the error message will not be displayed.
    The QuickTime Component that causes the error message is “XiphQT”, which is used to play Xiph formats in any QuickTime based application.  The Component can be located here: http://www.xiph.org/quicktime/
    When installing the latest version of the program “Juicer” from digital juice, the QuickTime Component is installed.  Juicer will run without the Component, but gives a message that it is missing.  I have removed the Component since I use Encore to a much greater extent.
    To remove the XiphQT Component from QuickTime, you must remove it manually because when QuickTime is uninstalled, the Component is left behind and will be a part of future installations of QuickTime.
    While the error message displayed during the launch of Adobe Encore CS5 is not detrimental, it can be frustrating, so I hope this may help others that receive the error message from above.  I should also note that I am using Windows 7 Home Premium.

    Greetings,
    My solution was attributable to my firewall (Microsoft Defender) blocking TCP connections to QuckTime.  Here's the steps that resolved my problems on CS5, Windows 7, 64 bit:
    Control Panel
    Windows Firewall
    Advanced Settings
    Outbound Rules
    New Rule...
    Program/Next
    This program path:  (use Windows Explorer to search)
    c:\Program Files (x86)\Adobe\Adobe Bridge CS5\msvcr71.dll
    Allow the connection
    (Leave checks Domain, Private, Public)/Next
    Name Description: (whatever you like - will display at top of Windows Firewall Advanced Security Outbound Rules)
    Good luck,  Michael

  • HT4623 I Installed the new ios6 and my siri stoped working how do i reinstall it?

    I installed the new ios6 and my siri stopped working how do I reinstall it?

    It says " application failed because MSVCR80.dll is missing from computer and then when I click okay it says I tunes wan't installed correctly Please reinstall
    Many thanks, that's perfect. Try the following user tip with those ones:
    Troubleshooting issues with iTunes for Windows updates

  • Sqlplus.exe fails to launch under Windows XP ([...] MSVCR71.dll [...])

    Hi,
    when I try launching sqlplus.exe under Windows XP, I get the error, in French
    "Cette application n'a pas pu démarrer car MSVCR71.dll est introuvable. La réinstallation de cette application peut corriger ce problème."
    which is approximately translated to
    "This application couldn't start since MSVCR71.dll can't be found. Reinstalling this application could fix this problem."
    I don't suppose reinstalling would help since I just unzipped Basic Lite and SQL*Plus, then set PATH.
    I'm getting this after failing to connect to my server on Debian. My Windows administration talents are fading. What could cause and fix this problem?

    from metalink note 338900.1
    1 - Download .NET from the Microsoft Website as this will include this run-time library.
    This should install the file under the Windows\System32 directory automatically.
    OR
    2 - Search for available sites to Download the MSVCR71.DLL file.
    This can be placed within the Windows\System32 directory or any other location but the location
    must be found listed within the PATH environment variable. Keep in mind, downloading this file from a site other than Microsoft's may have some adverse affect to your machine as the actual source of the file may be unknown.

  • MSVCR71.dll error message

    I am trying to run a Backup.1.exe file to restore documents after my hard drive failed.  I have copied the backup files from my external hard drive to a different HP computer.  Whenever I try to run the application Backup.1.exe, I get an error message that says "This application has failed to start because MSVCR71.dll was not found. Re-installing the application may fix this problem."
    Any ideas on how I can fix this and get my files off the hard drive?
    Thanks,
    Brad

    Hello Brad 131415:
             Welcome to HP's forum . I am not one for downloading these fix it tools. I have Iyogi Technical Support if I ever need them. Not every one can afford them. Here is the search results on bing for fixing
    your error http://www.bing.com/search?q=error+MSVCR71.dll&src=IE-SearchBox&FORM=IE10SR&pc=HPDTDF . You are welcome frrw. It did not list any thing from Microsoft. My McAfee's Browser Guard reports every thing listed is safe except Msvcr71 Dll Easy fix RegEasyPro.com on right hand side is a bad website. Everything else on page is green.  You are welcome frrw

  • Encore and AE crash on open..msvcr71.dll

    I am recieving this same message upon startup for each of these programs (The program can't start because MSVCR71.dll is missing from your computer. Try reinstalling the program to fix this problem,) and then the program will shut down! I have tried an uninstall reinstall with no luck and I have downloaded all updates available for all products in Production Premium. I am running a PC with 64 Bit Windows 7, I have googled this error message and found quite a few websites with "fixes / repairs" but am unsure as to what to trust and what not. "I am a video editor...not extreemly great with the tech aspect of these things". Your help would be greatly appreciated!!

    msvcr71.dll is a driver kept in most applications.
    As a first look I'd check if you have it in your windows folder (SYSWOW64 for 64bit O.S).
    Then, it must be in almost every Adobe Applications, THIRD PART PLUGINS INCLUDED, as well as in not adobe ones.
    If re-installation of your suite (or simply applications) has not worked, then, trouble is in another application and/or plugin.
    Everything must be installed and run as admin.
    If this isn't your best day should be also a windows trouble.
    Many website suggest a copy-paste work-around: personally I'm bit afraid of it.
    Hope this will help
    Ciao
    Giorgio

  • Copying msvcr71.dll from JRE installation

    Hi,
    When we started developing with Java 6, we found that the exe files we generated would fail because they could not find "msvcr71.dll". We know how to resolve that problem - the release notes for Java 6 say that we should include that dll in the same directory as the exe.
    http://java.sun.com/javase/6/webnotes/
    (under Windows notes)
    Does anyone know what the licensing issues are for this? The release notes for Java 6 only tell us to distribute the DLL, but they don't mention any license obligations on us for doing so, and the page that they link to on the MSDN contains no information about redistribution.
    We were hoping to copy the DLL that is included in the JRE installation into our own installation, but we aren't sure if this is legal.
    The only thing we've been able to find about this is a similar issue with Python distributions where because developers would be distributing a version of Python with their software, and that Python distribution was created with a licensed version of MS Visual C (where the DLL comes from), then it would be ok that they were "distributing" the dll with their own software.
    The text of that argument is at http://www.thescripts.com/forum/thread554311.html
    Does anyone know what the licensing situation is?
    Thanks

    If you have a license for Microsoft Visual C++ 2003 then it works
    check the link
    http://www.thescripts.com/forum/thread554311.html
    Regards

  • Missing dll file, MSVCR71.dll

    I cannot get my Photoshop Starter Edition to open.  I've been using this program for years and a couple weeks ago I received an error report stating, " The application or DLL C:\Program Files\Adobe\Photoshop Album Starter Edition\3.2\Apps\MSVCR71.dll is not a valid Windows image."  I can't open any of the program files.  Its telling me to check my installation diskette, which I can't find.  I use this program all the time for all my photos and I'm lost without it.  Can anyone give me some advise as to how I can fix this program.  I don't want to re-install it as I'm afraid of losing all my photos etc..  If anyone has some advise for me I would really appreciate it.  Thank you.

    Thanks, John. I found the missing file on the web by following your link and put it back where it belonged. Program boots up just fine, now. The computer still bothers me about the drive door being open, but that is more an irritation (as I simply close the dialog box) than anything else...
    Bill

  • How do I reinstall Adobe Acrobat XI Pro from the Creative Cloud? I was deleting another program and accidently deleted Acrobat.

    How do I reinstall Adobe Acrobat XI Pro from the Creative Cloud? I was deleting another program and accidently deleted Acrobat.

    Sweetmelissa63 for information on how to reinstall Adobe Acrobat XI Professional please see CC desktop lists applications as "Up to Date" when not installed - http://helpx.adobe.com/creative-cloud/kb/aam-lists-removed-apps-date.html.

  • How do I reinstall ipod 5th gen software after formatting my ipod?

    I formatting my ipod because my PC asked me too and now my ipod has a white screen. I've tried resetting it and it won't work. How do I reinstall the ipod's software? It says I need to "use itunes to restore"

    I would have a look at your iPod's User Guide for assistance on the different syncing preferences you can set up with your iPod and the different content that can be synced to it.
    http://manuals.info.apple.com/en_US/iPod_Late_2006_Features_Guide.pdf
    B-rock

  • How do I reinstall Acrobat 8 Standard on  Windows 7? [was: Reinstall]

    Just got a new computer with Windows 7.  How do I reinstall my Adobe Acrobat 8 Standard?

    if you need the installation file, contact the reseller that originally sold acrobat 8 std to you.
    if otherwise, explain the problem.

  • My iTunes library is missing since upgrade Lion 7.2.  I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each one upon reinstalling the backup copy? Thank you for help

    Almost my iTunes library is missing since upgrade Lion 7.2. (the last 2.5 weeks worth of added music has transferred post-upgrade, none of whcih was bought from iTunes)
    I have it all backed up so that's not the issue. How can I reinstall it with all my hundreds of playlists intact or do I have to recreate each playlist upon reinstalling the backup copy? This would save a HUGE amount of time and efforts. Thank you for your help!

    hi Limnos,
    I do not mean the entire ITunes folder but, rather, the contents of the ITunes folder prior to September 29th.  (90% of the media is missing, along with all playlists)  The media that remains says it was added on 9/29 although I know most of it was added many months or even years earlier. There are no playlists listed at all, before or after 9/29.  (I know for certain that I added non-iTunes purchased songs on 10/6 although I had not created playlists for them)
    I have my iTunes folder backed up on both an external drive as well as Time Machine.
    I run iTunes off of an ITunes folder on my computer rather than from the external, if that's what you mean about how I have it set up. 
    Is it OK to drag the entire iTunes folder from the external drive onto my laptop's drive and see if that fixes it?
    Thank you for your help!
    Deb

Maybe you are looking for