How do I reinstall on MacMini server?

I've had an awful experience going from snow leopard server to lion server using the migration instructions and assistant.  So I am starting fresh again on a new Mac Mini server I've only had for a week. 
How do I reinstall Lion Server on the MacMini server when it came with Lion server and it's not in my app store?
I noticed that COMMAND + R gives me the internet recovery, but no the built in recovery. Why is that?
After agreeing to run the Lion installer through the internet recovery, I am told that features such as FileVault and Recovery mode aren't supported on my System disk (which is a mirrored set from the installed 500 GB drives) and these features will not be available because I am installing Lion (client) on the drive (which is necessary first before installing Server.app). No Recovery mode.  What does this mean and why not.
Doesn't it seem that if you buy a MacMini Server that the installed OS and Server ap would be placed in my app store account for emergencies?
I need a non-online way to recover this serve should it fail or I need to start fresh again.  I already had a Lion USB recovery disk that I made which worked for my Mac Pro, but not my Mini Server.  When I tried to boot frmo it, I just got a grey circle crossed out.
Anyd advice would be much appreciated
This all started because the migration didn't make my mini server an open directory master like the snow leopard server was.  I decided to start over and do i manually.
MacMini Server 2011

Reboot with Command + R. That will start your mini from the recovery partition. Once in recovery mode, use disk utility to erase your disk.
Now repartition it with 1 partition. Call it "Mini HD" or whatever you like. Format as Mac OS X Extended (Journaled). Click the 'Options' button, GUID Partition Table should be the default. Choose it if it's not. Now click Partition. Boom, you have a properly formated HD ready for a fresh installation of Lion.
Next, quit Disk Utility and choose the option to reinstall Mac OS X. It will download from Apple servers and when it's done you can do a clean install.

Similar Messages

  • How do I reinstall Snow Leopard Server on a Mac Mini Server 2010?

    How do I reinstall Snow Leopard Server on a Mac Mini Server 2010? I have already attached a Mac Superdrive and tried to download, but the buttons at the bottom of the dialog screen are greyed out.

    Not sure where you're getting tangled here or how much you know about OS X Server 10.6, so...
    AFAIK, Snow Leopard Server wasm't available as a download, it was a separate DVD distribution. 
    Unlike more recent versions of OS X Server, the 10.6 server distributions were usually standalone DVD disks, as well. 
    (There is a slight wrinkle if your Mac needs a newer version of 10.6 than your server distribution; there was a different streaming upgrade process for that.  IIRC, the appropriate OS X client version was installed first, then you booted that client version and loaded the DVD and installed OS X Server.)
    But if you have a Snow Leopard Server distribution that supports your particular Mac Mini model, then boot the DVD, use Disk Utility from the Utilities menu in the bootable DVD environment, wipe the disk, and then install OS X Server.
    You'll need a 10.6 license key, if you don't already have that.
    FWIW, here are the available manuals.

  • How do I reinstall my DNS server

    How do I reinstall my DNS server

    What happened that requires you to reinstall DNS?
    Is your DNS server an AD DC? If it is a DC, and you only have one DC, then I really don't recommend uninstalling then reinstalling it.
    If you can describe the problems you are seeing with DNS, maybe we can assist to help fix the DNS problems instead of reinstalling DNS.
    Ace Fekay
    MVP, MCT, MCSE 2012, MCITP EA & MCTS Windows 2008/R2, Exchange 2013, 2010 EA & 2007, MCSE & MCSA 2003/2000, MCSA Messaging 2003
    Microsoft Certified Trainer
    Microsoft MVP - Directory Services
    Complete List of Technical Blogs: http://www.delawarecountycomputerconsulting.com/technicalblogs.php
    This posting is provided AS-IS with no warranties or guarantees and confers no rights.

  • How can i reinstall os x server?

    I am having major issues with server and I want to completely reinstall sever but not mountian lion.

    After deleting Server.app, you may need to reset the LaunchServices database in order to reinstall it.
    This procedure will reset the LaunchServices database. All associations between file types and applications will revert to their defaults. If you don't want that to happen, STOP.
    Back up all data if you haven’t already done so. Before proceeding, you must be sure you can restore your system to the state it’s in now.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Terminal in the page that opens.
    Triple-click anywhere in the line below to select it. Copy or drag — don't type — the text into the Terminal window:
    /System/Library/Frameworks/CoreServices.framework/Versions/A/Frameworks/LaunchServices.framework/Versions/A/Support/lsregister -kill -r -domain user
    Press return. Log out, then log back in.

  • How do i reinstall mountain Lion after installing maverick. Maverick  is not compatible with FileMaker 13 server. Maverick is now objecting to reinstalling Mountain Lion. Where do I go from here? Help?

    How do i reinstall mountain Lion after installing maverick. Maverick  is not compatible with FileMaker 13 server. Maverick is now objecting to reinstalling Mountain Lion. Where do I go from here? Help?

    If you can download the ML installer you can make a bootable install media by using:
    http://liondiskmaker.com/
    If your Mini came with ML you can also boot to Internet Recovery
    OS X: About OS X Recovery
    and it will install ML. Make sure you boot to Internet Recovery and not the Recovery Partition. If to the partition you will only get Mavericks.

  • How do i reload OS X Server on Mac Mini, App store says installed but no reset or reload, system tells me to reinstall

    how do i reload OS X Server on Mac Mini, App store says installed but no reset or reload, system tells me to reinstall?

    Reboot holding down the Command and R keys.  This will get you in to the Recovery partition.  From there you can reinstall the entire OS.  Please note, Server.app will not be included in the reinstall.  You will need to log into your App store account to download it.

  • How do I setup permission to transfer files to the MacMini Server. I thought I had it setup to do such but apparently not as I get an error message?

    How do I setup permission to transfer files to the MacMini Server. I thought I had it setup to do such but apparently not as I get an error message that I don't have permission?

    Both the Mac and Windows units we are usinghave connectivity to the MacMiniServer (on the same network) to open and edit files but cannot transfer new files to the MacMini. FileSharing is on. I went to File Sharing on the MacMini and added the appropriate users and checked FileSharing. Is there something else I needed to do?

  • How to manage port open/close on MacMini server

    Dear all,
    In order to secure my server, I discover than some port are open.
    Is there a way to close all port and open only 445 and 548.
    I would like to make sure that no body can access the server from outside of the society ecepted if the have VPN client configured.
    The collaborator should be able to connect the server via afp, but form out side they need to use VPN.
    Then I am looking for a way to manage port on macmini server
    Many thank for your help
    Cheers

    Hi,
    I finally heart that port can not be closed on the router because I am usinf 1:1NAT.
    How can close all port on my Macmini and open only the port ssh. I will not use VPN.?
    If I turn on the firewall with the option to close all protocole. Is there a command to open a selected port?
    If there is only the port 22 (SSH) how can I mount a remote folder with afp or with somethin else? I also have on PC over the 7 iMac.
    Many thank for your help
    Cheers

  • I want to use a headless MacMini Server as a webhost for four sites.

    I am considering trying the MacMini server to use as a webhost. I have a comcast business account with 5 IP's. It's an extreme connection speed package.
    My sites would be:
    2 Joomla! CMS sites,
    1 WordpressMU Site,
    1 SugarCRM site.
    I am looking for something an idiot could install and manage. I'm using a hosting company right now, but would like more control of my OS.
    I don't like the fact that Apple doesn't include phpMyAdmin as a standard package with Snow leopard.
    I installed the above scripts on my macbook pro through MAMP and MAMP Pro, but all I can get is local access. The public cannot access my sites folder (regular snow leopard). So, I was told that I need snow leopard server to accomplish what I want to do. Can anyone help me figure out what I need, and how it's done?
    Walt

    It does sound like a simple port forwarding thing.
    Do take care with that Comcast account. If my experience is any indication you will not get the advertised speed. If you read the agreement it is only guaranteed for the first few kilobytes or so of any transmission and then backs down to normal speeds afterward.
    Comcast will also do you a "favor" and turn the firewall on by default in the supplied modem/router. You have to call them and have them turn it off if it interferes with anything.

  • Multiple domains and multiple IPs in the same MacMini Server

    I am sure that this topic has been faced already but I cannot find enough information to really dig into a solution.
    I have a macmini server with two IPs let say x.x.x.12 and x.x.x.13 .
    The server is set up on the first IP. It has his primary zone, machine record, mail aslias and www alias.
    Lets call the server domain server.domain1.com
    Everything works fine I have a couple of local users and a couple of LDAP users. Just to test the machine setup.
    I can send and receive emails using any of the users as [email protected]
    Now I would like to have another domain, domain2.com in the same server .
    The final goal is to have users under different domains. They have their own email box, calendar, etc.
    It will be preferable that I can share the same username with different domains. But I can live without that option.
    My first test was to have the second domain called server.domain2.com using the second IP. x.x.x.13 .
    For that I created another Primary Zone with domain2.com as machine record of x.x.x.13 . To use the second IP I simply create another Ethernet interface on the macmini.
    In the Mail -> Advance settings I added the host aliases as well as virtual hosting domains for domains2.com.
    With this setting I can send emails as [email protected] or [email protected] but when I replay to their messages I get a "Relay access denied" error from server.domain1.com .
    I also tryed another domain pointing to x.x.x.12, the same as server.domain1.com . I did not create any extra Primary Zone but the local host aliases and the virtual hosting domains.
    Same issue. I can send but I get a "Relay access " error.
    As you might notice I am a novice on servers settings. I just try to recreate a similar environment common to Virtual Hosting providers for my own website playground but I cannot cut through this email configuration obstacle.
    Any significant meaning that can be leading me to learn how to do it will be very very appreciated . (beside lynda,com tutorials that I followed already but do not mention multiple domains for mails).
    Thanks

    the problem I try to solve is to manage multiple domains in one MacMini Server.
    Having two IPs is secondary.
    I would like that each domains has his own users with emails, iCals, Wiki and web sites.
    The main problem is having emails to work for any additional domain beside the default one on the machine IP.
    I also got an additional IP address to be used on the same server hoping that it make things easier but apparently is making things more difficult.

  • I cannot open safari on my Macbook Pro Yosemite How do I reinstall it?

    I have recently purchased a new MacBook Pro Retina with Yosemite OS X.  I got Trovi.com adware on the computer and in the process of removing this I lost the use of Safari.   When I attempt to open Safari I get a message telling me It does not connect with the server.  How can this be rectified and  how do I reinstall the software if this is the method to use?
    John Atkinson

    JudySings,
    I tried all your suggestions without success.  However, I have now been able to recover Safari access to server, or at least Safari seems to be working.  I pick up the solution among a number on Duck Duck web site.
    Here is what was suggested and worked.
    Go to Safari> Preferences>Privacy
    Clk Cookies and Web site data-Highlight only "Always allow" option and "Remove all website data".
    Go to " Website use of Local Services and only highlight "Deny without prompting".
    The Safari message of "Safari cannot connect to server" did not appear and the browser bar opened.
    I cannot answer why this worked but it did.
    I thank you for your help.
    John B Atkinson

  • New MacMini Server

    I've just taken delivery of a new MacMini Server - which has proved to be a trifle difficult in understanding.  Firstl I have two drives - one is labeled Macintosh HD2 and the other Macintosh Server - although I cannot see it at the moment.  
    Starting up from new wasn't as straightforward as I thought and with a usb Mac Time-Capsule ready to load, it didn't exactly do what it should have.
    I eventually got it to load from the Time Capsule onto Macintosh HD2 so all file former files from the MacBookPro have loded accordingly into the HD2 drive.   So now I have the dock showing some of my applications except for the Macintosh HD logo that I am familiar with and resident on my desktop.   The question is how can I get this HD icon to appear on the desktop?  
    I actually don't require the server aspect at the moment, but I might in due course.
    Another puzzle is that in my User Folder, the next level shows many of my secondary folders but several of them, such as Dropbox, Music, My Images, pictures, Public etc  have a red (no entry) circle and clicking on them says I don't have permissions to enter the folder.
    I would welcome some input please as I fear that the setup hasn't gone exactly as I would have hoped.
    Thank you

    Thank you Dave. One assumes therefore that if I've installed all my programmes on the wrong drive, I should theoretically be able to move them over to the Server HD.
    I really don't know about this and Apple don't give any specific instructions as to the contrary.

  • MacMini Server as 40 users fileserver

    We have to create a new network and, instead to use Windows system, I'm suggesting to have Mac solution.
    I will have a network with 40 users (the idea is 40 MacMini), mostly working with office sw.
    The server will have only these duties:
    - it will be the file server for the 40 users
    - it will manage the users name and password (like a windows domain) to limit the users
    I was thinking about this configuration:
    2x MacMini Server (cloned configuration, to prevent any system stop) with a Pegasus RAID (thunderbolt) system for the storage.
    It will be able the macmini to manage it or I need more power?
    Any suggestion will be appreciated!!
    Thanks.
    M.P.

    Hi Marckus,
    You could do a backup via VPN with something like Carbon Copy Cloner.. You'd just need to make sure your backup volume was mounted at either end and you should schedule them to run at differing times. Backup over VPN will depend on how much data your backing up and the speed of your internet connection at both sites. You don't want to have slowdown when your users are in.
    Mac Mini - as you'll be sharing your data on the Pegasus it wont make that much difference. With the server having 2 HD's and mirroring them is a good form of redundancy and a bit cheaper than the SSD. The SSD will boot much faster..
    Hope that helps
    Beatle

  • Macmini Server for Mentoring program

    I am in the development stages of setting up a mentoring program. I have been looking at the macmini server as an option but have a some questions in regards of ease of use versus a linux setup.
    I will be using apple computers along with ipad for my coordinators.
    I see that I can host a web site, but will it be able to host a vbulletin forum as well?
    I am pretty proficient when it comes to software, but have not really messed around with linux much. tried ubuntu and liked it but it seems odd coming from mac osx and windows. How user friendly is SL server edition campared to Ubuntu server in regards to setup, maintaining and management. I do not have the budget to have an IT person on staff.
    The server will primary be used to host website, forum, and file sharing. I like the integration of ical and the mail server. Any advise and suggestions appreciated.

    I've never setup a Ubuntu server but a Mac mini server is very simple, use your 90 days of free phone support as much as you can. Or see what that new Joint Venture thing is that they launched the other day.
    The Web Server is good and the Mail and iCal integration I can't remember if a Forum comes as one of the easy setup site options so thats a bit more work under the hood.
    The Applecare gives you phone support for a very good price cant see you getting an option like that on Linux, both have good online forums for assistance as well.
    The applecare doesn't cover command line though just GUI which probably means a vbulletin install would not be covered it you ran into trouble (so online forums for that one).
    For the price and its abilities IMO you'd be mad not to go with the Mini, especially with other macs and ipads.

  • I had photoshop elements 10, the computer crushed how can i reinstall it in my new apple computer?

    i had photoshop elements 10, the computer crushed how can i reinstall it in my new apple computer?

    You can't sign in because there is nothing to sign in to. For PSE 10 the only sign in was to photoshop.com, which has been dead and gone for a year and half. Just skip the sign in. Reinstalling will not change this.
    PSE 8, 9, 10 Can’t Sign In, Error 404 | Barbara's Sort-of-Tech Blog
    PSE is locking up because it's looking interminably for the non-existent photoshop.com server.

Maybe you are looking for

  • Unable to get past message about "Find my IPOD Touch" when ITUNES starts

    When I connect my IPOD Touch to computer and Itunes opens, I get the screen shown below and unable to get past it. I can access all other stuff in Itunes. I am unable to sync by IPOD. Clickin on the supposed links in the message does nothing. This is

  • How to Print File as the same as picture/fax viewer ?

    Hallo : I wrote a program which can let the specified png file to be printed. (png file is about 17xx * 11xx, output to A4 paper) The goal is the print result as the same as the windows built-in picture/fax viewer (by Full Page Fax Print Mode) And I

  • Artist in order "HELP"

    My itunes libary used to have the artist names in alphabetely order,now its changed to name of song in alphabetely order.How do I change it back? THANKS custum   Windows XP  

  • IIS MP - Enabling Rules and Discoveries that are Disabled by Default

    Dears, In the IIS MP Guide they are asking to Enabling Rules and Discoveries that are Disabled by Default. For below: DotNetCLRMemoryPercentageOfTimeInGC                                                                        Failed.To.Perform.Initial

  • Web Object causes background to disappear

    I've noticed that, when going into a slide containing a Web Object, the background disappears for a moment. This just happens when published as HTML5 (and happens on both a Mac and an iPad). Is there any way to prevent this from happening? It looks v