How do i reload elements 9 when it says files are missing

it tel me to reload but all the disc does is try to remove it and says i do not have right aurthrity

What OS are you on? If on Mac, go to //Applications/Utilities/Adobe Installers/Uninstall Adobe Photoshop Elements 9. On Windows XP, go to Control Panel > Add/Remove Programs and find Photoshop Elements 9 on the list. If on Windows Vista/7, go to Control Panel > Programs and Features and find Photoshop Elements 9 on the list.
Once you have uninstalled the software, reinstall using the disk.
If you are getting errors about authority, this would have to do with the user account you are currently logged in as. Make sure you are logged into an account that has full administrative privileges.

Similar Messages

When opening says files are missing

Have just reinstalled itunes and when I try to open the application it says that thereare files missing. My wuestion is what files. I had a previous problem with missing and msi file. Now I'm not sure what is wrong. Have uninstalled and reinstalled several times.

For general advice see Troubleshooting issues with iTunes for Windows updates.
The steps in the second box are a guide to removing everything related to iTunes and then rebuilding it which is often a good starting point unless the symptoms indicate a more specific approach. Review the other boxes and the list of support documents further down the page in case one of them applies.
Your library should be unaffected by these steps but there is backup and recovery advice elsewhere in the user tip.
tt2

ITunes won't launch after upgrade - says files are missing

I had trouble upgrading to version 6 but disabled my anti virus software (McAfee) and the upgrade seemed to run OK. After restarting my computer iTunes won't run as it says files are missing and I need to install them. It was all working fine before. I have over 4200 tracks and I'm worried I've lost them although they are all still on my iPod. What do I do next? Please help.

Sorted! Panic over. I ran the download again and everythin seems OK.

When i ran itunes latest update i got a virus from it and now itunes will not open as it says files are missing. i was able to get rid of the virus.

When I ran an itunes update yesterday it downloaded a virus with it. Was able to remove the virus but itunes will not run now as it says certain files are misssing. What do I do now?

Where did you download the update from?
You may have to uninstall iTunes and re-install it from apple.com/itunes
Here is the article for uninstalling iTunes for Windows XP: http://support.apple.com/kb/ht1925
And the article for Windows Vista/7: http://support.apple.com/kb/ht1923

Can't figure out why FPGA code won't compile, says files are missing

Hey guys, I get the following error, sorry for the big vomit of error code. As near as I can tell from reading that, it thinks a number of the files it requires to run some of the subvi's I'm calling are missing. I don't understand how to fix this when these are LabView native files, for example, the high-throughput rectangular to polar converter?
Help much appreciated.
Error code follows:
Error 7 occurred at Open VI Reference in nirviOpenVIRefByNameOrPath.vi->niFpgaRemapObjsAndListIfUnderXNode.vi->niFpgaRemapObjsHandleXNodeSubErrors.vi->nirviMassageErrorList.vi->nirviParseAndMassageErrors.vi->nirviReloadErrorList.vi->nirviGenerateErrors.vi
Possible reason(s):
LabVIEW: File not found. The file might have been moved or deleted, or the file path might be incorrectly formatted for the operating system. For example, use \ as path separators on Windows, : on Mac OS, and / on Linux. Verify that the path is correct using the command prompt or file explorer.
=========================
NI-488: Nonexistent GPIB interface.
VI Path:
All text parsed:
<CodeGenErr>
<ErrorCode>-61160</ErrorCode>
<DynamicText><TreeLineInfo><LineInfo><DiagramObject><VIPath>C:\NIFPGA2009\clntTmp\FPGAImagi~2C_FPGATarg~A7_2Tap8bit~6A_nagEfsCz~08\MungedForFPGA\NI.Munge.2 Tap 8 bit RT Image Processing Initial.vi_FPGACompileCopy00000001.vi</VIPath>
<UID>5485</UID>
<ObjectName>High Throughput Rectangular To Polar</ObjectName>
</DiagramObject>
</LineInfo>
</TreeLineInfo>
</DynamicText>
</CodeGenErr>
<CodeGenErr>
<ErrorCode>-61101</ErrorCode>
<DynamicText><TreeLineInfo><TreeInfo><TreeID>1</TreeID>
</TreeInfo>
<LineInfo><DiagramObject><VIPath>C:\NIFPGA2009\clntTmp\FPGAImagi~2C_FPGATarg~A7_2Tap8bit~6A_nagEfsCz~08\MungedForFPGA\NI.Munge.2 Tap 8 bit RT Image Processing Initial.vi_FPGACompileCopy00000001.vi</VIPath>
<UID>5036</UID>
<ObjectName>SubVI: 'Butterworth Filter'</ObjectName>
</DiagramObject>
</LineInfo>
</TreeLineInfo>
</DynamicText>
</CodeGenErr>
<CodeGenErr>
<ErrorCode>-61101</ErrorCode>
<DynamicText><TreeLineInfo><TreeInfo><TreeID>1</TreeID>
</TreeInfo>
<LineInfo><DiagramObject><VIPath>C:\Program Files\National Instruments\LabVIEW 2009\vi.lib\rvi\Analysis\utilities\niFPGA I32xI32 Dot Product - 3 elements I64.vi</VIPath>
<UID>63</UID>
<ObjectName>Timed Loop</ObjectName>
</DiagramObject>
</LineInfo>
</TreeLineInfo>
</DynamicText>
</CodeGenErr>
<CodeGenErr>
<ErrorCode>-61101</ErrorCode>
<DynamicText><TreeLineInfo><TreeInfo><TreeID>1</TreeID>
</TreeInfo>
<LineInfo><DiagramObject><VIPath>C:\NIFPGA2009\clntTmp\FPGAImagi~2C_FPGATarg~A7_2Tap8bit~6A_nagEfsCz~08\MungedForFPGA\NI.Munge.2 Tap 8 bit RT Image Processing Initial.vi_FPGACompileCopy00000001.vi</VIPath>
<UID>5036</UID>
<ObjectName>SubVI: 'Butterworth Filter'</ObjectName>
</DiagramObject>
</LineInfo>
</TreeLineInfo>
</DynamicText>
</CodeGenErr>
<CodeGenErr>
<ErrorCode>-61101</ErrorCode>
<DynamicText><TreeLineInfo><TreeInfo><TreeID>1</TreeID>
</TreeInfo>
<LineInfo><DiagramObject><VIPath>C:\NIFPGA2009\clntTmp\FPGAImagi~2C_FPGATarg~A7_2Tap8bit~6A_nagEfsCz~08\MungedForFPGA\NI.Munge.2 Tap 8 bit RT Image Processing Initial.vi_FPGACompileCopy00000001.vi</VIPath>
<UID>5036</UID>
<ObjectName>SubVI: 'Butterworth Filter'</ObjectName>
</DiagramObject>
</LineInfo>
</TreeLineInfo>
</DynamicText>
</CodeGenErr>

GotRobotFriends,
Hello! First of all, can I get the following information from you?
1.) LabVIEW and LabVIEW FPGA Versions
2.) FPGA Target you are trying to compile code for.
Typically errors 61101 and 61160 are thrown when a Single Cycle Timed Loop (SCTL) has elements within it that won't allow it to finish it's execution in 1 clock cycle.
Looking through the error codes below, do you have any of the following items in a Single Cycle Timed Loop?
High Throughput Rectangular To Polar
Butterworth Filter
Also, are you using xnodes? Problems have been seen when items that would normally return an error when placed in a SCTL do not return errors if they are used with xnodes.
Ben Sisney
FlexRIO V&V Engineer
National Instruments

I tunes says files are missing, have deleated and reload still same

I tunes will not work since loading firefox, it said files were missing, so I re-installed, still did not work, deleated firefox but that did not cure it

I tunes will not work since loading firefox, it said files were missing, so I re-installed, still did not work, deleated firefox but that did not cure it

ITunes won't open, says files are missing. reinstall?

I've been using iTunes for a couple years now today I can't open it. A message keeps popping up saying I need to reinstall iTunes due to files missing. Is there a way to do a "repair install" What do I need to do to not loose all of my music.

You should not loose any music if iTunes was maintained properly.
In most cases it is so no need for concern. But to verify.
Go to My documents - My Music - iTunes - iTunes Music - Inside this folder you should see all your music, videos, podcasts, etc.
If you get the chance right click on iTunes Music folder, select properties. This will show you the file size. The file size should be pretty big depending on how much music you had.

I have recently purchased a new computer and photoshop element. It looks like its downloaded it but I don't know how to access it. it says file are ready...down load files have been extracted and saved to folder....launch PS elements and open specific fol

I have recently purchased a new computer and photoshop element. It looks like its downloaded it but I don't know how to access it. it says file are ready...down load files have been extracted and saved to folder....launch PS elements and open specific folder. it looks like it downloads. It then keeps taking me back to this page. Im not sure where to go next

if you have a win os you should have dl'd an exe and a 7z file.
put both in the same directory and double click the exe.

How do i quit bootcamp when it say "No bootable device -- insert boot disk and press any key"

Hi,
How do i quit bootcamp when it say
"No bootable device -- insert boot disk and press any key"
cuz i resraart my imac and the nextday i went to use my imac i just say mi that.
Can you please help mi out ?

Reboot holding down the Option key between the tone and the apple logo w/pinwheel. When the boot manager gives you a selection of boot partitions, choose your Lion partition. Once booted, go to System Preferences > Startup Disk > select your Lion partition.
Regards,
Captfred

TS3212 How do I install it when it says I can't install?

How do I install it when it says I can't install? I already have iTunes but it won't let me sync my iPod.

What does the install error message say? (Precise text, please.)

How come when i open my itunes it says "itunes cannot open because some of it's required files are missing. Please reinstall itunes." What do i do?

last night i wanted to update my ipad to 4.3 and when i tried to; it told me i had to download the new itunes too. so i tried downloading the new updated version on itunes, and this morning when i tried to open my itunes it said "itumes cannot open because some of it's required files are missing. Please reinstall itunes." what do i do?

With that one, I think we should try getting the malware possibilities off the table first.
Try downloading and installing the free version of Malwarebytes AntiMalware. Update your MBAM definitions and then run a full scan of the PC. (Takes about 2 hour on my Lenovo.)
http://www.malwarebytes.org/mbam.php
Does the scan find any infections? If so, please paste the contents of the log file for the scan in a reply here so we can have a look.

Cant run itunes on my windows xp,when i install it and try to open itunes,it keeps on saying "itunes cant run because some of its required files are missing. please reinstall itunes... what can i do...

cant run itunes on my windows xp,when i install it and try to open itunes,it keeps on saying "itunes cant run because some of its required files are missing. please reinstall itunes... what can i do...

You should first uninstall iTunes completely.
This is not an easy task!
Read this article on how to remove iTunes completely
http://www.howtogeek.com/howto/23959/completely-remove-itunes-and-other-apple-so ftware-from-a-windows-computer/
Then download the latest version of iTunes for your Windows Version and install it.

FAQ: My files are missing from Elements Organizer, or How to reconnect your images?

What is Elements Organizer?
The Elements Organizer can be used to arrange, codify, systemize, group, and classify your media. When you import your images and video into the Orgnizer, you are adding information about your files to a catalog. Your files remain on your hard drive where they were, unless you are importing them from a camera, in which case the files are copied to your hard drive to a location of your choosing.
What is an Elements Organizer catalog?
The catalog is a database that stores information about the files you've imported into Elements Organizer. When importing a file, the first thing Organizer does is collect the file's name and location on the hard drive. If the file has any attached compatible metadata, such as keyword tags, these are imported as well. You can use multiple catalogs and yourr catalogs can be carried forward from version to version.
Why does Elements Organizer say my files are missing?
Since the catalog database only stores information about your file, and not the file itself, if any of that information is changed outside of Elements Organizer, the connection to the file is lost. There are three ways this can happen: the file name is changed, the file location is changed, or the file has been deleted. If you need to rename, move, or delete a file, you can do so within the Elements Organizer, and then the connection is not lost.
What is Reconnecting?
When a file has been renamed, moved, or deleted, the catalog database needs to be updated with that new information. The Reconnection process allows you to point out a file's new name, it's new location, or to delete the database entry on your file if the file no longer exists on your hard drive.
Where can I learn more?
Managing Files in Elements Organizer
Get photos from files and folders
Importing photos from a digital camera
Import photos from a previous version
Moving files
Hiding and deleting photos
Managing Catalogs in Elements Organizer
Use Backup, Restore to move catalog | Organizer | Elements 6 or later
Troubleshoot catalog backup, upgrade | Organizer | Elements 6 or later
Freeze when you repair a catalog | Organizer | Elements 6 and later
Reconnecting Media in Elements Organizer
Reconnect missing files | Photoshop Elements | Windows
Can't edit, open, reconnect photos or media | Incorrect drive letter | Elements 6 or later Organizer | Windows

Anything besides reconnecting all the files, such as switching the drive letter (if that is even possible)?
The easiest way to fix this is to change the drive letter. Here are instructions for Windows 7: http://pcsupport.about.com/od/windows7/ht/change-drive-letters-windows-7.htm
To prevent this from happening again, you can change the drive to some very high letter, like X:, and then it should remain constant. In Lightroom, right-click on the top level folder ,and select Find Missing Folder, and then point it to your X: drive.
I know I can "Import---Add to catalog" all the photos from my external hard drive back into the catalog but I do have a question:
I won't address your question specifically, since re-importing is a very bad idea. A very bad idea. You will lose information that is not in the sidecar files, such as collection members, edit history, flags, virtual copies, stacks and a few other things. Just don't go there. Change the drive letters, as I explained.

ITunes wont open. when I click on it, it says " iTunes can not run because of the required files are missing. please reinstall iTunes.

iTunes wont open. When I click on it, it says " iTunes cannot run because some of its required files are missing. please reinstall iTunes". PLEASE HELP!

See the advice given in the user tip:Troubleshooting issues with iTunes for Windows updates for a very workable approach.

"I am constantly getting a message which says Itunes cannot run because some of it's required files are missing. Please reinstall iTunes." I've reinstalled a number of times and re-booted but it only seems to last a short time. How do I fix it?

I am constantly getting a message which says "iTunes cannot run because some of it's required files are missing. Please reinstall iTunes." I've reinstalled a number of times and re-booted but it only seems to last a short time. How do I fix it?

HI daddio,
Ok some things first I need to know...Did you use Microsoft cleanup utility to clean up all those uninstalls you have done?
I hate Norton and anyone who reads my posts will know that. I have seen way too many infected PC's by Norton users. Did you try the EWIDO and AdAware scan? I see you said you read lots of posts. That is helping folks remove the malware in order to get iTunes and quicktime back to health.

How do i reload elements 9 when it says files are missing

Similar Messages

Maybe you are looking for