How do I remove a date and time mark on a stored photo so I can put it into a calendar

How do I remove a date and time mark on a stored photo so I can put it into a calendar.....?

In Iphoto, yes.  You can use PhotoShop Elements or some other editor.  You can also crop.  (You might be able to make the retouch brush smaller.)

Similar Messages

  • Is there a way to remove the date and time from pictures?

    Is there a way to remove the date and time from phoos in iPhoto?

    Are you referring to the Date and Time some cameras put right on the image?  If so there is nothing really good in iPhoto to do this. You could try the Retouch tool and see how that looks but I think you will need something more precise and powerful, like the clone tool in Aperture.
    Also something like PhotoShop or GIMP - The GNU Image Manipulation Program (free) should do what you want also.
    If your asking about some other date post back.
    regards

  • Can you remove a date and time stamp off a photo that has already been taken?

    Can you remove a date and time stamp off a photo that has already been taken?

    only with Photoshop or similar software that offer some clone/heal feature.
    Weekend Travelers Blog | Eastern Sierra Fall Color Guide

  • How do I find the date and time stamp on pictures?

    How do I find the date and time stamp for my pictures?

    The Photos app will not do this but other apps will. iPhoto has an icon that when tapped with the photo open will show the EXIF information you are looking for. iPhoto is not free but you can purchase it in the App Store.
    There may be other photo apps that provide this information as well.
    PhotoForge2 will show the EXIF data as well as the GPS data if it is available.

  • HOW DO I ACCESS PICTURE DATE AND TIME?

    HOW DO I ACCESS PICTURE DATE AND TIME ON A IPHONE 4?

    There may be a 3rd party app that provides for this. Apple's iPhoto iOS app provides this data.

  • I changed the date on my mac to 1995 now date and time or start up disks wont open what can i do?

    i changed the date on my mac to 1995 now date and time or start up disks wont open what can i do?

    Many system actions will misbehave, given an inaccurate date. If you cannot open System Preferences you can reset your system date and time using Terminal.
    Please read everything that follows before proceeding. Write them down if necessary because the effects of setting a preposterous system date are unpredictable.
    Quit System Preferences, force quit if necessary: OS X: How to quit an unresponsive application using Force Quit
    Open Terminal - it is in your Utilities folder and looks like this
    You can find Terminal by using the Finder's Go menu and choosing Utilities, then double-click the Terminal icon.
    At the prompt, you will be typing a command resembling the following:
    sudo date mmddhhnnyyyy
    ... but you must substitute the actual date and time in the command that corresponds to the date format used for your location. In other words if your custom is to use a date like 16 December 2013 then reverse the mm and dd values.
    Substitute numerals in the above command according to the following:
    mm = month
    dd = date
    hh = hour (24 hour format)
    nn = minutes past the hour
    yyyy = year
    Each of those values must be two digits except for the year which can be two or four digits. As an example if the current date and time is December 16, 2013 at 9 PM your command will be the following:
    sudo date 121621002013
    or
    sudo date 1216210013
    Either one will work.
    To recover from your inability to use System Preferences to set the date and time, the value entered does not have to be precise, it just has to be approximate.
    Enter that command using the actual time and date for your location and in the appropriate format, then press the Return key. Terminal will ask for your Admin Password - the same one you use when you log in to your Mac. Type it and then press the Return key. What you type will not appear, not even with •••• characters.
    To determine if your change was effective just type the date command and press the Return key. Terminal will reply with the date and time. If it appears correct and in the correct format, you should be able to open System Preferences > Date & Time once again. Selecting the "Set time and date automatically" and choosing an appropriate time server will adjust your Mac's system clock to the precise time.

  • How to enter a new Date and Time each day in a Numbers Spreadsheet...

    Hi... I have finally decided to move away from Excel and really give Numbers a shot... I have an application where each day I first enter the current date and time into a particular cell of a new row and then I enter some data in cells adjacent (in the same row) as that entered date-time. Then the next day I want to again enter the (new) current date and time and add more data next to that new date-time and so forth day after day... You can't use something as simple as =NOW() because then everyday, ALL of the date-times would change to the current time... Nope, now what I want... I just want to be able to EASILY and QUICKLY enter the current date-time value in one call and then have that specific value stay there forever... In Excel, this is accomplished with the keyboard shortcuts of
    <cntl> followed by a semicolon (;) for the date
    then enter a single space (for separation of date versus time) followed last by
    <command> followed again by a semicolon...
    So all together that is,
    <cntl><;><sp><command><;>
    and that puts something like
    4/10/2010 9:49:00 AM
    in a single cell...
    That's what I now want to be able to do in Numbers...
    How do I do that??? Do I use the menubar item "Insert Date and Time" and if so, how exactly do I get the current time to show up in the chosen cell??? With formatting??? Is there a keyboard shortcut method like the one I mentioned that works for Excel?? I've perused the manual and though I found lots on date-time, I didn't see how to do specifically what I want to do... I likely just missed it as surely it must be easy to do...
    Any feedback would be much appreciated... thanks... bob...

    Badunit wrote:
    The result of running that script is "UI Enabled = TRUE".
    I have cells named by the header values.
    This may be the problem.
    The script is an old one which deciphered only the letter+digit cell references.
    Here is a new version which works with every kind of cell reference.
    --[SCRIPT insertDateTime]
    Enregistrer le script en tant que Script : insertDateTime.scpt
    déplacer l'application créée dans le dossier
    <VolumeDeDémarrage>:Users:<votreCompte>:Library:Scripts:Applications:Numbers:
    Il vous faudra peut-être créer le dossier Numbers et peut-être même le dossier Applications.
    Placez le curseur dans la cellule qui doit recevoir la date_heure
    menu Scripts > Numbers > insertDateTime
    La cellule pointée reçoit la date_heure.
    L'aide du Finder explique:
    L'Utilitaire AppleScript permet d'activer le Menu des scripts :
    Ouvrez l'Utilitaire AppleScript situé dans le dossier Applications/AppleScript.
    Cochez la case "Afficher le menu des scripts dans la barre de menus".
    +++++++
    Save the script as a Script : insertDateTime.scpt
    Move the newly created application into the folder:
    <startup Volume>:Users:<yourAccount>:Library:Scripts:Applications:Numbers:
    Maybe you would have to create the folder Numbers and even the folder Applications by yourself.
    Put the cursor in the cell which must receive the date_time.
    menu Scripts > Numbers > insertDateTime
    The pointed cell receives the current date_time.
    The Finder's Help explains:
    To make the Script menu appear:
    Open the AppleScript utility located in Applications/AppleScript.
    Select the "Show Script Menu in menu bar" checkbox.
    Yvan KOENIG (VALLAURIS, France)
    2009/03/01
    2010/04/11 is now able to treat every kind of cell references
    property theApp : "Numbers"
    --=====
    on run
    set {dName, sName, tName, rname, rowNum1, colNum1, rowNum2, colNum2} to my getSelParams()
    my doYourDuty(colNum1, rowNum1, tName, sName, dName)
    end run
    --=====
    on doYourDuty(c, r, t, s, d) (*
    c = columnIndex
    r = rowIndex
    t = table's name
    s = sheet's name
    d = document's name *)
    local cdt
    set cdt to my cleanThisDate(current date) (* the new date_time as a clean date_time *)
    tell application "Numbers" to tell document d to tell sheet s to tell table t
    set value of cell r of column c to cdt as text
    end tell -- application …
    end doYourDuty
    --=====
    on cleanThisDate(dt)
    (* ugly code but once I got date_time with milliseconds so if necessary, I drop them *)
    local l
    set l to my decoupe(dt as text, ":")
    if (count of l) > 3 then set dt to date (my recolle(items 1 thru 3 of l, ":"))
    return dt
    end cleanThisDate
    --=====
    on getSelParams()
    local r_Name, t_Name, s_Name, d_Name, col_Num1, row_Num1, col_Num2, row_Num2
    set {d_Name, s_Name, t_Name, r_Name} to my getSelection()
    if r_Name is missing value then
    if my parleAnglais() then
    error "No selected cells"
    else
    error "Il n'y a pas de cellule sélectionnée !"
    end if
    end if
    set two_Names to my decoupe(r_Name, ":")
    set {row_Num1, col_Num1} to my decipher(item 1 of two_Names, d_Name, s_Name, t_Name)
    if item 2 of two_Names = item 1 of two_Names then
    set {row_Num2, col_Num2} to {row_Num1, col_Num1}
    else
    set {row_Num2, col_Num2} to my decipher(item 2 of two_Names, d_Name, s_Name, t_Name)
    end if
    return {d_Name, s_Name, t_Name, r_Name, row_Num1, col_Num1, row_Num2, col_Num2}
    end getSelParams
    --=====
    set {rowNumber, columnNumber} to my decipher(cellRef,docName,sheetName,tableName)
    apply to named row or named column !
    on decipher(n, d, s, t)
    tell application "Numbers" to tell document d to tell sheet s to tell table t to return {address of row of cell n, address of column of cell n}
    end decipher
    --=====
    set { d_Name, s_Name, t_Name, r_Name} to my getSelection()
    on getSelection()
    local _, theRange, theTable, theSheet, theDoc, errMsg, errNum
    tell application "Numbers" to tell document 1
    repeat with i from 1 to the count of sheets
    tell sheet i
    set x to the count of tables
    if x > 0 then
    repeat with y from 1 to x
    try
    (selection range of table y) as text
    on error errMsg number errNum
    set {_, theRange, _, theTable, _, theSheet, _, theDoc} to my decoupe(errMsg, quote)
    return {theDoc, theSheet, theTable, theRange}
    end try
    end repeat -- y
    end if -- x>0
    end tell -- sheet
    end repeat -- i
    end tell -- document
    return {missing value, missing value, missing value, missing value}
    end getSelection
    --=====
    on decoupe(t, d)
    local l
    set AppleScript's text item delimiters to d
    set l to text items of t
    set AppleScript's text item delimiters to ""
    return l
    end decoupe
    --=====
    on parleAnglais()
    local z
    try
    tell application theApp to set z to localized string "Cancel"
    on error
    set z to "Cancel"
    end try
    return (z is not "Annuler")
    end parleAnglais
    --=====
    --[/SCRIPT]
    It's available on my idisk :
    <http://public.me.com/koenigyvan>
    Download :
    For_iWork:iWork '09:for_Numbers09:insertDateTime.zip
    Yvan KOENIG (VALLAURIS, France) dimanche 11 avril 2010 14:16:41

  • How to detect the iPhone Date and Time

    Hi guys,
    I am new this plateform and I am working on an iPhone application in Objective-C. I need to detect the date and time of iphone clock in the objective-c.
    Please let me know if anybody knows how can I do it.
    Thanks,
    Ranjit Singh

    Ranjit,
    Be sure to consult the docs for the iPhone SDK. If you are running the simulator, you probably have access to frameworks and classes not available on the phone itself. The iPhone docs don't show NSCalendarDate as a valid class for iPhone (but it exists for MacOS). I think you'll need to use NSCalendar if you wish to have it run on the device (and not just the simulator).
    Do you have a device you are testing on? It would be good to verify this (I don't and therefore must use the simulator).
    Cheers,
    George

  • How to get the client date and time ?

    Dear Sirs...
    Using jdeveloper 10.1.2.0
    How can i get the client date and time using the HttpServletRequest ?
    thanks for any help in advance
    best regards

    If your code is running on the client pc you can just create a new instance of the java.util.Date class. That class automatically defaults to the current time of the client machine. Otherwise if you're running the code on the server, you could insert/post the client date/time by adding its string representation as a parameter to the HTTP request object.
    Ronald

  • How to set the system date and time in LabVIEW 6i?

    Hi,
    How can I set the time of the computer from Labview 6i? Is there any function to do this?
    Thanks.

    Arnau wrote in message news:<[email protected]>...
    > Hi,
    >
    > How can I set the time of the computer from Labview 6i? Is there any
    > function to do this?
    >
    > Thanks.
    Not natively that I know of. You could use a LabVIEW DLL call to link
    to a Win32 API call which sets the date and time. You would need to
    have privileges to do it.
    Doug D.
    [email protected]

  • How do you change the date and time

    how do i changethe time and the date on  hp photosmart plus B210 all in one series

    In most printers you go to the setup icon on the display, and then to either tools or preferences. In one of those menus there will be an option to adjust the date and time.
    Jon-W
    I work on behalf of HP
    Please click “Accept as Solution ” on the post that solves your issue to help others find the solution.
    Click the KUDOS STAR on the left to say “Thanks” for helping!

  • Okay, so my baby brother had put my iphone in microwave and now it turns on only on the charger, the screen will not work and the date and time has changed, is there any way it can be fixed or how much it would cost

    okay so my brother had put my phone in microwave , it now only turns on on charger, the date and time cahnged, but it will not let me use the screen, is there anyway this can be fixed ?or how much it would cost.

    I would very much doubt that. The radition level inside a microwave is termendous. I am totally flabbergasted that there is much of it is still that much working.
    Allan

  • How to get last modified date and time of a file which is in apache server.

    Hi ,
    I need to get last modified date and time of a file in remote machine.
    This file is in remote machine which has apache server installed.
    I am trying to get this information by connecting to apache server from client by giving absolute URI of the file to file object.
    URI is got from apache server URL by using toURI method.
    when I use lastModified method , its throwing exception , because scheme of URI is not file.
    I can't give scheme as file because ftp server is not installed on that server
    Is there any other way to get this information .

    No, unless you can use an FTP client.

  • How do you know the date and time synchronization in the windows version?

    Where can I see the date and time synchronization?

    There's a toolbar button sitting in the Customize Palette. Move that button to a toolbar or into the Open Menu box; when you hover the cursor over that button a tooltip will appear with the day-of-week and the time of the last Sync event.

  • How to get the current data and time of SCOM server via SCOM SDK (API) calls?

    Hi,
    I need to read the current date and time of SCOM server via SOM SDK.
    Is there a class in SDK that provides this info ?
    Thanks,
    satheesh

    To get time and date of Alerts of SCOM, You can use following command let "get-scomalert"
    Also, You can refer below links
    http://blog.tyang.org/2013/02/21/using-scom-2012-sdk-to-retrieve-resource-pools-information/
    Please remember, if you see a post that helped you please click "Vote As Helpful" and if it answered your question, please click "Mark As Answer"
    Mai Ali | My blog: Technical

Maybe you are looking for