How do I remove a reflection from my photo slideshow?

I have set up a slideshow on a photo page and published OK. However I have reflections under some images and not under others, regardless of whether I view via Safari or Firefox.
Actually I would rather not have a reflection at all. I have read through all the other debates about how to try to ensure one inserts images correctly in order to ensure the reflections work well. I like others can not select the reflection option as it is greyed out, although the shadow and opacity can be altered.
How else can I remove this reflection?
Any ideas greatly received!
with thanks

As far as I can see I can not turn the reflection off as it is only in Grey not black text.
But maybe I am not looking in the right place? Just to recap: I have set up a slide show by dragging and dropping images into a photos page. Then I am looking at the Graphics section of the Inspector where it gives you options on Shadow and Opacity but it won't let me do anything with the reflection.
Or should I be looking elsewhere to set the parameters of the slideshow?

Similar Messages

  • How do you remove a person from a photo and replace her with another person

    How do you remove a person from a photo and repalce her with another person.

    There are many tool and "tricks" to accomplish this manipulation. However, depending on the image one technique might be more appropriate than an other. And then there is the question of how to do it "skillfully". For example, the shadows in the person that is being substituted might be different than in the original image creating the obviously "photoshopped" look.
    Doing an Internet search on your posting title brings up lots of examples.

  • How do I remove aberation/halo from composited photos.

    I want to replace the sky in one photo with the sky from another photo.
    In Bridge I selected the photos and  load the photos into Photoshop layers.  This is Photoshop CC 2014 64-bit.  When they arrive in Photoshop, neither photo has any type of halo or aberration along its skyline.
    In Photoshop I create a mask in the upper photo using the Magic Wand.  I create a layer mask reveal all and fill the selection with black.    Then a thin white halo appears on the edge of the selection at 100%.  .
    If I disable the mask, the halo disappears; enabling the mask causes the halo to reappear.
    I have tried everything I can think of using Refine Edge.   Nothing removes this halo.
    I appreciate any comments or suggestions.

    If you're trying to replace a completely blown out sky with a pretty blue one, it's going to take a fair amount of artistry to make it look convincing.  Depending on how blown out the sky is there's going to be some amount of 'leak', where the highlights creep onto the skyline (skyline being anywhere the sky interfaces with the foreground/background, be it buildings, trees, hair, etc).  And the more detailed the skyline, such as in hair and tree leaves, the more difficult it'll be.
    First, I'd recommend doing it in multiple layers.  Don't try to fix it in one step, it won't look good.  Several layers trying to mask in the new sky, adjust the highlights, etc.  Multiple layers of small changes is the secret to realistic compositing.
    Second, I'd start with using Select Color Range, not the magic wand.
    If it's a really detailed skyline, I'd use channels and "burn" to try to make a selection.  You can search tutorials on YouTube.  The idea is that you find the channel with the most contrast, then burn/dodge/curves for even more contrast, then make your selection.
    Beyond that is where the 'art' comes in.  I'd probably add a hue adjustment layer, with colorize on, and try to color the blown out sky a light blue.  Then I'd invert my mask and try to lightly paint in some blue highlights around the halo area.  I'd probably even add a blank layer and literally paint in some blue - soft brush, very low opacity and fill - to even it out a bit.  Again, small steps.
    I'd also consider lowering the opacity/saturation of the sky you're adding in.  Don't try to take it from a completely blown out sky to a perfectly blue one, it's just not going to work.  Lighten it up a bit.  And lighten it up more at the horizon.  Something people usually don't do when replacing skies, and it's always obvious.  The sky should be lighter at the horizon.
    Finally, I'd get some more blue into the foreground/background.  If there was a blue sky then the rest of the photo would reflect this to some bit.  Your reflections are going to be all white because you have a white sky.  I'd start with a color balance layer to add a bit more blue and warmth.  But I'd also paint in some highlights:  Sample some colors from the sky, and on a blank layer I would paint in some blue onto the foreground/background.  Change your blending mode to something like soft light.  Then, in the layer properties there's two sliders for "Blend If".  On the lower one (for the underlying layer), hold down "Alt" and move the slider from the left towards the right.  You're changing where your blue modifications apply, and since they're not going to apply in the shadows as much as the reflected highlights, I'd move them out of the shadows.  Play around with it till it looks right.  Making your adjustments not apply equally to all parts of the photo will really help it look more realistic.

  • How can you remove a figure from one photo and put it in another?

    I am trying to move a figure (dog) from one photo/pic to another.  Is this possible with elements?

    Yes, you should not have any trouble.
    In Editor, go to the expert tab.
    Open picture B, the one you wish to select something from (the dog) to add to another picture.
    Use one of the selection tools, e.g. selection brush, lasso tool, to select the object. You will see an outline ("marching ants") once the selection is complete
    Go to Edit menu>copy to copy the selection to the clipboard
    Open picture A, then go to Edit>paste
    Use the move tool to position object from picture B.
    In the layers palette you should see picture A as the background layer, and object B on a separate layer.

  • How do I remove a device from my photo stream?

    I lost an iPod touch about a year ago and the person who "found" it continues to use it (in a different country) and I occasionally still see some of their photos on my photo stream.  How can I "disconnect" from that device?  It kind of freaks me out that if I can see their photos, then I know they can see my photos.  (the device did NOT have 'find my iphone' app loaded on it)

    Change your iCloud password.  That will prevent further access to your account by anyone without the new password.  See http://support.apple.com/kb/PH2617.

  • How can I remove a tower from a photo using Adobe Photoshop Elements 12?

    I have found video instruction, but not for the same software that I have, so it is very difficult to follow.

    cynthiah76608922,
    Use the Spot Healing Brush. Check "Proximity Match" on the tool's option bar. I used 20px brush size.
    Left click sequentially over the tower from North to South.

  • How can I remove all faces from certain photos

    I've done some photography at my church for a camp and I've got tons of photos with dozens of people that I have no idea who they are - and I don't want iPhoto to suggest them as possibilities for the people I actually do know.
    The same goes for any type of crowd shot, i don't know these people! It just take a really long time to go through each photo and remove each face box manually.

    That is not currently a feature of iPhoto - suggest to Apple - iPhoto menu ==> provide iPhoto feedback
    LN

  • How to remove a reflection from a windshield on a car photo?

    I am trying to remove a reflection from a windshield on a car photo.  Cloning does not work for me.  Any suggestions?

    Please post the picture.
    You can do it via the camera icon in the reply box here, or at www.pixentral.com. If you use pixentral, please provide the URL so that we can open it.

  • HT4623 how do I remove credit card from information can't download or update anymore

    how do I remove credit card from information can't download or update anymore

    Open iTunes on your computer, click on your Apple ID and log in with your password. Edit your payment information.

  • How can we remove the commas from the Formula value in SAP BW BEx query

    Hi All,
    How can we remove the commas from the Formula value in SAP BW BEx query
    We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
    Regards
    Venkat.

    Do you want to remove the commas when you run the query on Bex Web or in RSRT?
    Regards

  • How can i remove a card from iTunes ?

    How can i remove a card from iTunes ?

    If you want to remove a credit/debit card from your account then on your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link.  If you are doing it on your iOS device then tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account  - that should also give you a payments link on your account's page.
    Changing payment info : Change or remove your payment information from your iTunes Store account (Apple ID)
    If you don't get the 'none' option on the payment details screen : Why can’t I select None when I edit my Apple ID payment information?

  • How do you remove credit card from apple store ios7

    How Do You Remove Credit Card From Apple Store With IOS7

    After establishing the Credit Card account (i.e. after you have made purchases), you can remove the credit card information by editing your payment info, choosing "None".
    Settings>iTunes and App Stores>Apple ID>View Apple ID>Sign-in>Payment Information

  • How do you remove credit card # from iTunes account

    How do you remove credit card # from iTunes account without entering a new one because added money to account from gift card?

    On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link.  If you are doing it on your iPhone then try tapping on your id in Settings > iTunes & App Store and select 'View Apple ID' on the popup - that should also give you a payments link on your account's page.
    Changing payment info : http://support.apple.com/kb/HT1918

  • HT202667 how can I remove credit card from apple id ?

    i don't want to use apple id with credit card anymore i purchased enough apps for my apple device so now i wanna remove it so how can i remove credit card from apple id

    On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link.  If you are doing it on your iPhone then tap on your id in Settings > iTunes & App Store and tap on 'View Apple ID' on the popup and log into your account  - that should also give you a payments link on your account's page.
    Changing payment info : http://support.apple.com/en-gb/HT1918
    If you don't get the 'none' option on the payment details screen : http://support.apple.com/en-gb/TS5366

  • How do you remove credit card from account so child can't make purchases?

    How do I remove credit card from apple ID so child can't make purchases?

    Account section of iTunes or App Store.
    Barry

Maybe you are looking for

  • Multiple iTunes accounts with iPad2.

    I have the following scenario: We have purchased several iPads for our employees and we are trying to find the best way to administer them. We would like to be abble to: 1. Users to use their home computer and personal iTunes account to purchase apps

  • Outlook 2010/Error sharing Calendar: Error while preparing to send sharing message

    Everyone that is connected to this exchange is receiving an error when they attempt to share a calendar in outlook 2010.  We are using Exchange 2010 and Outlook 2010.  The error reads:  Error while preparing to send sharing message.   Any ideas on a

  • Any example to import and export itab to function module

    hi all, as the table parameter in function module is obsolete, please advise an example on how to pass in an internal table and return back the result in an internal table as well. for example, i have itab1 and itab2. By using table parameters i got

  • My iMac HD seems to be shrinking...

    I am using an iMac intel chip 17inch with 2 gig ram running OS X 10.4.11 I've noticed that the HD on my iMac seems to be getting smaller and smaller... Currently, I only have 66 gig of HD space yet two weeks ago, had almost 100 gig. Haven't created a

  • How to show view tab Main Report and all of Sub Report in one action through Visual FoxPro

    How to show all view tab (Main Report and all of Sub Report) in one action. I already know how to show Main Report with this code sample: oRptRun=createobject("CrystalRuntime.Application") oRptView=this.Parent.oleRptViewer oRptOpen=oRptRun.OpenReport