How do I remove access numbers that are no longer ...
as the title states.....
you can disable a Skype To Go number when you sign in and modify your account settings at www.skype.com
but actually I don't even think there is a need to disable a Skype To Go number -- simply stop using it if you wish -- your Skype To Go number is only intended for your personal use and the PIN is secret, plus you control the phone numbers that are authorized to call the Skype To Go number, so it's not like it can be abused by others
Regards,
Neil
Similar Messages
-
How can I remove email addresses that are saved in itouch automatically
It seems that every time I send or receive an email, the recipient email address is saved. how do I remove these email addresses. I do not want to keep some of these addresses. I have also found that if I had typed in the email address wrong, this is saved as well and I have no way to correct the wrong address. Your help is appreciated.
Unsync and resync all of your movies from your iPod. You can do this by removing the tick mark next to Sync Movies from under the iPod's Movies configuration tab in iTunes assuming you have your iPod set up for automatic syncing.
To access this tab, plug your iPod in and click on it from under Devices in the left hand pane of iTunes. Over to the right locate the Movies tab along the top. Here you will find the options for how and what movies to sync. Hit the Apply button in the lower right hand corner to sync the updated changes to your device when you remove the retick the option to Sync Movies.
B-rock -
How can I remove a file that is no longer associated with a page?
I have a hurdle that is preventing me from completing a task.
I am trying to build a spry asset--specifically a vertical menu. When I initially built the page, I built the menu. However, the look was rejected and I was asked to re-create it. I went back, removed all references to the spry asset, and stripped the menu from the page. But when I open the page which I want to build the menu on again, it is still showing that a .css and .js file are associated, event though they aren't. And when I try to rebuild the asset, it won't add the proper .css and .js file because it thinks the files are already created.See the screenshot below to view what I'm talking about.
If anyone has an idea of how to tell Dreamweaver that those two files are no longer associated with the page, I would appreciate some help. THis is the last major hurdle before I can complete a project.
Thanks,
KenHi
Providing you have removed all references to the js/css files, (have you removed the code at the bottom of the page?), use the spry updater to insert your new js/css.
You can get the spry updater extension form the downloads box here - http://labs.adobe.com/technologies/spry/.
PZ -
Windows OS 7
iTunes 12
Ever since the new update with iTunes 12, all of my song titles have a track number before them.
Is there any easy way to remove this without having to go through my entire library?
Any help would be appreciated.
Thanks,
Nancyturingtest2 wrote:
OK, that was the wrong approach. What should have worked would have been the process described in Empty/corrupt iTunes library after upgrade/crash. No doubt your songs not only start with two leading digits, but have also lost the information regarding artist, album and their actual track numbers.
Make a strong cup of coffee/tea/your favourite beverage and review this thread: Any software that can rebuild iTunes songs lost to Unknown Artist/ Unknown Album. It should be possible to restore a pre-upgrade version of your library, the reconnect it to the files (assuming they have been moved). Please feel free to ask questions.
tt2
I couldn't get that script program to open. I'll just have to manually fix this mess.
Thanks! -
How to quickly delete all songs that are no longer on my computer
I just deleted a huge music folder, and I am wondering how itunes could find out all these no longer available tracks and delete them from itunes.
Check the link below, there may be a script that does that.
[Dougscripts|http://dougscripts.com/itunes/scripts/scriptcount.php?sortBy=Name&o p=y] - Many itunes scripts -
All on original computer: how to deauthorize ipod devices (shuffles) that are no longer available or working? We need to add our current (new) devices...
Ipods/iphones/ipas/apple tvs are not authorized at all.
Authorization applies ONLY to computers.
You need do nothing. -
How do you remove previous recipients from a message list? When I begin to type a number, I have numbers appear that are no longer in use, or are incorrect. They are not in my contacts list either.
I apologize. I didn't see that you hadn't updated to iOS 7. That's an iOS 7 option. With iOS 6, you'd need to restore the device as new. Note that that will result in your phone being updated to iOS 7.
Best of luck. -
I bought a used iphone. I installed ios 7 before I realized that the previous owner's email and password are still in the phone. How can I remove them so that I can use the icloud and "find my phone" feature?
Thanks so much! It will be kinda weird to contact the person directly, but I guess I will give it a try. Is there anything that I can refer her to in this discussion to let her know I am legit, and not a creeper? Also, I don't know if you can answer this or not. When I plug my phone into itunes, and it says that it is backing up, does that mean that it is going into the other person's cloud, since I cannot access it?
-
How can I get rid of numbers that are covering my entire desktop, caused by right-clicking "Clean Up Selection" on an icon? The Apple OS X Mavericks blue & green desktop is totally gone. HELP!
Here's a screenshot of my desktop, as of a few minutes ago: http://lewgoodman.com/desktop.tiff
-
on a iphone4, under settings, messages, send and receive, there are multiple phone numbers listed. How do I remove them? they are constantly checked even when i uncheck them. this is causing copies of my text messages to go to those phones.
Are you using the same AppleID for all those phones? If so, get them all their own AppleID.
KOT -
How do I include those empployee numbers that are not 8 digits?
Hello all again.
My script currently doesn't find those employee numbers that are NOT 8 digits (some emp nos are 6, 7, 9) when doing comparisons. I've tried LPAD but it still doesn't find. Can anybody suggest a reason for this? I can post my whole script if you want but basically it doesn't match record in my temp table (SU_TEMPLOYEE_DETAILS):
SELECT std_hire_date, std_last_name, std_sex, std_date_of_birth,
std_email_address, std_emp_status,
LPAD (std_employee_number, 8, '0') std_employee_number,
-- std_employee_number,
std_first_name, std_marital_status, std_middle_names,
std_nationality, std_title, std_national_identifier,
std_address_line1, std_address_line2, std_address_line3,
std_address_line4, std_post_code, std_telephone_1, std_country,
std_location_id, LPAD (std_supervisor_number, 8, '0') std_supervisor_number
FROM SU_TEMPLOYEE_DETAILS
WHERE std_employee_number = :p_emp_number..with the existing record in Production instance:
SELECT DISTINCT per.person_id, per.business_group_id, per.last_name,
per.start_date, per.date_of_birth, per.email_address,
--LPAD (per.employee_number, 8, '0') employee_number,
per.employee_number,
per.first_name,
per.marital_status, per.middle_names, per.nationality,
per.national_identifier, per.sex, per.title,
padd.address_id, padd.primary_flag, padd.address_line1,
padd.address_line2, padd.address_line3,
padd.town_or_city, padd.postal_code,
padd.telephone_number_1, paas.assignment_id,
paas.assignment_number, paas.object_version_number,
paas.effective_start_date, paas.effective_end_date,
paas.job_id, paas.position_id, paas.location_id,
paas.organization_id, paas.assignment_type,
paas.supervisor_id, paas.default_code_comb_id,
paas.set_of_books_id, paas.period_of_service_id
FROM per_all_people_f per,
per_all_assignments_f paas,
per_addresses padd
WHERE padd.person_id(+) = per.person_id
AND paas.person_id(+) = per.person_id
AND per.employee_number LIKE 'C%'-- :p_emp_number
AND per.national_identifier = :p_ni_number
AND REGEXP_LIKE(per.employee_number, '[[:alpha:]]');The Employee Number is 7 digits long (0000016). But I need the script to match its record where it may be 000016 or 00000016 in Production. Is this possible?
Many thanks for looking..
StevenJackyWhite wrote:
My script currently doesn't find those employee numbers that are NOT 8 digits (some emp nos are 6, 7, 9) when doing comparisons. I've tried LPAD but it still doesn't find. Can anybody suggest a reason for this? I can post my whole script if you want but basically it doesn't match record in my temp table (SU_TEMPLOYEE_DETAILS):
The Employee Number is 7 digits long (0000016). But I need the script to match its record where it may be 000016 or 00000016 in Production. Is this possible? I would like to use the TRIM Function here rather than a simple LPAD (with hard coded length) especially if the length of the column std_employee number varies based on the leading zeroes. Something like:
SQL> WITH test_tab AS
2 (SELECT '000016' col
3 FROM DUAL
4 UNION ALL
5 SELECT '10000016'
6 FROM DUAL
7 UNION ALL
8 SELECT '00000016'
9 FROM DUAL)
10 -- "end of test data "
11 SELECT col, TRIM (LEADING '0' FROM col) changed_col_2
12 FROM test_tab
13 /
COL CHANGED_
000016 16
10000016 10000016
00000016 16
3 rows selected.
SQL> variable param VARCHAR2(30);
SQL> exec :param := '00016';
PL/SQL procedure successfully completed.
SQL> WITH test_tab AS
2 (SELECT '000016' col
3 FROM DUAL
4 UNION ALL
5 SELECT '10000016'
6 FROM DUAL
7 UNION ALL
8 SELECT '00000016'
9 FROM DUAL)
10 -- "end of test data "
11 SELECT col, TRIM (LEADING '0' FROM col) changed_col_2
12 FROM test_tab
13 WHERE TRIM (LEADING '0' FROM col) = TRIM (LEADING '0' FROM :param)
14 /
COL CHANGED_
000016 16
00000016 16
2 rows selected.
SQL> exec :param := '016';
PL/SQL procedure successfully completed.
SQL> WITH test_tab AS
2 (SELECT '000016' col
3 FROM DUAL
4 UNION ALL
5 SELECT '10000016'
6 FROM DUAL
7 UNION ALL
8 SELECT '00000016'
9 FROM DUAL)
10 -- "end of test data "
11 SELECT col, TRIM (LEADING '0' FROM col) changed_col_2
12 FROM test_tab
13 WHERE TRIM (LEADING '0' FROM col) = TRIM (LEADING '0' FROM :param)
14 /
COL CHANGED_
000016 16
00000016 16
2 rows selected.
SQL> So your where clause will become something like:
WHERE TRIM (LEADING '0' FROM std_employee_number) =
TRIM (LEADING '0' FROM :p_emp_number)Hope this helps.
Regards,
Jo -
How do I back up documents that are stored in iCloud to my own hard drive?
The trouble is, however I search for an answer to this question, I get instructions on how to back up stuff TO iCloud.
I want to back up stuff that applications like Pages and Numbers are already storing IN iCloud.
See, I don't want to have to trust iCloud to safely store my documents. Not unless there are copies somewhere that I can fall back on if (it's really only a matter of when) something goes fatally haywire in iCloud.
It's easy enough to do with a service like, say, Dropbox, which treats my "cloud-stored" files like they are in a folder on my hard-drive. So when I run either a local (Time Machine/Capsule) or a cloud (Crashplan, in my case) backup, those files get backed up. So I have at least three copies of those files - in Dropbox, on my Time Capsule, and on Crashplan's servers.
So how do I do that with docs that are stored in iCloud? Apple wants me to store stuff in iCloud - if I have iCloud enabled and want to save a doc to another destination, there are multiple steps I want to go through. And I'm fine with using iCloud if I'm creating documents that I want to be able to access from my iOS devices as well.
Yes, I can do that with Dropbox, but it's less seamless than doing it through iCloud.
But I want my own backups of those files, and near as I can tell, Apple makes that nearly impossible because iCloud does not show up anywhere as a folder that I can access or sort.
Or does it? Am I missing something?
If so, let me know.... if not... is there a solution to this dilemma, or is it just one more aspect of iCloud that Apple has not clearly thought through?
Thanks,
--PSRight. You didn't read the post, you only read the title.
The title came from an earlier step in the process when I was posing a question to the systen.
The pertinent part of the question is "How to I back up documents that are stored in iCloud"
That the destination for the backup is NOT my internal HDD should be clear from the rest of the post.
And frankly, even if that is where I want to back up to, that would at least give me two copies, at least giving me one duplicate of the stuff on iCloud.
So please stop wasting my time if you can't answer the actual question: How do I backup content that is stored in iCloud. The destination of the backup is irrelevant.
--P -
I have a new iPad with wifi. When I send messages I can see my sons and my husbands but not my phone number. We all have an iPad and all use the same apple ID as iPad the bill. How can I remove their numbers and add mine?
Add another e-mail account to your messages, so people could reach you on that e-mail from messages. As soon as you are online (if you have wifi only iPad) you are able to send and receive messages. i.e. your son can send you a messages from his iPhone addressing it to your (that additional) e-mail address.
-
How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder?
SamanthaR22 wrote:
How do I see my pictures that are in my aperture library in finder? I would like I be able to select photos in finder when I am making photo books online without having to export them first from aperture jinto a new folder. Is there any way to view and download my pictures directly from finder? [Emphasis added.]
The digitization of data has introduced a complexity to our interactions with it that we continue to struggle with. "Picture" and "Photo" now mean different things in different contexts. In this case (and in general) defining our terms clearly is the first step towards understanding what we are trying to do. Understanding is the path that allows us to do it.
All pedantic, but please stick with me here .
You record a set of instantaneous data with a camera.
That data is processed by your camera and saved to a file.
The file format is usually either RAW or JPG.
You transfer those files to your computer, and you import them into the program Aperture (often in one operation).
From each camera-file imported, Aperture creates a record in its database (called, imho unhelpfully, a Library) and an Image that you see in the Aperture Browser and Viewer.
Aperture links the Image and the imported file.
The imported file is called, within Aperture, an Original.
Every Image has an Original.
The Image is not the Original. The Image is what you see in Aperture.
The Original is a file that is stored on your computer.
You can make changes to an Image.
Aperture calls these changes Adjustments.
Adjustments are saved to another file attached to the record in the database. Let's call this file the Changes File.
Aperture uses these two files attached to the record in the database to create the Image.
Image = Original + Changes File.
The Image is not a file.
Because the Image is not a file, it cannot be shared with other programs. It exists only inside of Aperture.
In order to share an Image with another program, you must first create a file of the Image.
You do this by exporting Images ("File ▹ Export ▹ Version" is the command in Aperture; should be, imho, "File ▹ Export ▹ Image").
You may ask, "Why all the complexity? Why doesn't Aperture save Images as files?" The answer is simple: Images can require less — and in many cases very very much less — storage space than files of Images. Rather than save a full-size file for every Image, Aperture saves only instructions on how to make that full-size file. The gain in storage efficiency is huge. The trade-off is that although your Images are always available to be made into share-able files, you must create those files when needed (which you do by exporting selected Images).
Here is your question reworded with more precise terms:
SamanthaR22 might have written:
How do I access Images in my Aperture Library in the Finder? I would like I be able to select files in the Finder when I am making photo books online without having to create them by exporting Images from Aperture into a new Finder folder. Is there any way to view and download my Images directly from the Finder?
No, there is not. Images exist only in Aperture, and are not accessible for use in other programs. You must create, for each Image in your Aperture Library, a new file outside of your Aperture Library in order to use it with another program.
Aperture does allow you to create and save within your Library share-able files of your Images. These files are called Previews. You specify the file parameters in Aperture Preferences on the Previews tab. These files are available to other programs via the OS X Media Browser. These files are what you get when you drag selected Images out of the Aperture program and drop them on another program or on your desktop (which is part of the Finder).
HTH.
—Kirby. -
How do I remove access charge on suspended line?
I have two suspended lines on our More Everything Plan. How do I remove access charge on both these lines?@
tanishas_vzw - I think you mean that the lines need to be suspended "without billing, i.e., from the FAQ in the link:
Suspended with billing You'll be billed for all services and features during the suspension period. However, your contract and upgrade eligibility dates won't be impacted. If you subscribe to Equipment Protection, coverage continues throughout the suspension period. This includes Asurion Wireless Phone Protection (WPP), Total Equipment Coverage (TEC), Total Mobile Protection (TMP), and Extended Warranty (EW).
Suspended without billing You won't incur voice, data or feature charges while your service is suspended*. Monthly Verizon Edge payments will continue under your Verizon Edge contract. If you choose this option, your contract and upgrade eligibility dates will be extended for however long your line is suspended. If you subscribe to Equipment Protection, coverage continues throughout the suspension period. This includes Asurion Wireless Phone Protection (WPP), Total Equipment Coverage (TEC), Total Mobile Protection (TMP), and Extended Warranty (EW).
Maybe you are looking for
-
Photoshop Elements12 free trial install doesn't work
I'm a longtime Photoshop/mac user and am trying to download a trial version of Photoshop Elements 12 so that I can figure out and then show a client how to do something with it. The download assistant has been hung at "l...
-
Conditional error for comparison of sine waves
Hello Everyone, i am making a small program that is for some changes in sine waves and later i have to compare to set my condition. i cannot get through this error. i actually want out put as bolean so my condition for loop is attached with this outp
-
Can 30" Display be used as a TV?
Can the Apple 30" Cinema Display be used as a TV? I have digital cable through comcast. My HD Tuner Box has a DVI output. That being the case, would it be possible to use this display in combination with my tuner box to act as my television?
-
I don't see the airplay on my mac
I just purchased mountain lion, and the airplay does not appear in the top
-
Performance strategy based plans
Hi , in one of my scenario i created performance based strategy plans as below for every hrs. 500, 2000, 4000, 8000. when we started using sap counter reading was 16500hrs, if i entered this reading system generates "N" of orders as per the strategy