How do I remove Bootcamp and recover my disk space for my Mac OS X (Yosemite) usage?

I'm using MacBook Pro Retina (Mid 2014 version)
I've allocated 40GB for BootCamp, and 80GB left for my Mac OS X Yosemite for my initial configuration.
I need more space than ever now for my Mac OS and since I don't use my Windows 7 a lot, I thinking to remove my BootCamp partition and regain all the space.
Please advice what's the proper way for me to do that?

Back up your data, choose Utilities from the Finder's Go menu, and use the Boot Camp Assistant to return the drive to a single partition setup.
(120722)

Similar Messages

  • How can I uninstall Bootcamp and Recover the partition for the Mac HD

    How can I uninstall Bootcamp and recover the partition for the IMac HD?

    Boot into OSX.  Go back into the Bootcamp utility in the Utilities folder and re-run it.  It will give you the option to remove the Windows partition and make the OSX partition fill the whole drive again.  OSX will NOT be lost in the process.  No re-installing necessary.  Only takes a few minutes or less to complete.

  • How Do I Remove Bootcamp and The Entire Windows Partition?

    I have Windows running on my iMac with a partition. I want to remove it in its entirety to take the machine back to a 100% mac platform. Any thoughts?

    brit66 wrote:
    I have Windows running on my iMac with a partition. I want to remove it in its entirety to take the machine back to a 100% mac platform. Any thoughts?
    Easily done!
    Run BootCamp Assistant.app and restore to a single partition.
    As with all these kinds of operations, if you do not have a complete backup of Leopard, you should not do this, or if you do without a backup and "stuff" happens, just remember my post here.

  • HT201210 How do I remove itune and charger icon from my iphone screen and allow access

    How can I remove itune and charger icon from my iphone 4s screen and allow access. While downloading the lastest version of iune my iphone was being charged. The phone do not allow access anymore.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    Miss Bspace wrote:
    How can I remove itune and charger icon from my iphone 4s screen and allow access. 
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then see Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • I have a used Iphone with someone elses email on it for itunes, how do i remove it and put my account there

    I have a used Iphone with someone elses email on it for itunes, how do i remove it and put my account there
    It is an Iphone 4

    If you go to settings- store - click on the ID and sign out. Then you can put in your apple id.

  • How can i remove moved and deleted old libraries?

    I've moved a bunch of my libraries around, removed some, and have installed iphoto9 on a new mac. I love that in iphoto9 I can now create new libraries or decide which library to open. But, all of my older libraries are showing up in the list when I open with "option". Plus there are duplicates of the older libraries. I'm assuming there is a db or data text file somewhere that is populating this list. Does anyone know how I can remove old defunct libraries from showing up in the list?
    Thanks,
    Bob

    Thanks Terrence. I didn't even realize all these old files still had album xml files. I appreciate your help.
    Thanks,
    Bob

  • How do I remove Lion and go back to Snow Leopard OS?

    How do I remove Lion and go back to Snow Leopard?

    If you have the white upgrade disk (originally, you had Leopard and bought SL later), easy. I'm not sure if you have the grey disks (you bought the machine with SL).
    If you have the white disk, the first thing you do is get a USB external HD. Format it to GUID with disk utility.
    Insert the white SL disk and restart. Follow the instructions to install SL on the external disk.
    Have a look here for a step by step tutorial for setting up the external HD: http://www.maciverse.com/installing-snow-leopard-onto-an-external-hard-drive.htm l
    From here on in you have two choices:
    1. You can run SL off the external disk and keep Lion and all your files/data on the internal disk.
    This is the easiset thing to do. You can open files from your Internal Lion disk by navigating through to it in Finder when you're booted in to SL on your external disk. Practical if you have a desktop machine, maybe not if you have a laptop that you need to carry everywhere (you'd have carry the external HD with you all the time).
    Any non-Lion only (i.e., not Safari, Preview, Terminal and Mail Lion upgrades) apps should also run off your Lion disk when you're booted into SL, but if you have any problems, just drag them from the Lion Apps folder to the SL apps folder.
    2. Move everything over to the external disk if you plan to install SL back to your internal disk.
    Start copying over all your apps and files manually by dragging them from the internal disk Apps and Folders to the external disk Apps and Folders. If you have Time Machine, you can also copy your files by navigating to Time Machine through the Finder rather than trying to use the Time machine interface.
    You might spend some days doing this, but it's worth doing it manually. When you're done and sure you have everything, google 'Carbon Copy Cloner'. Download it (its free), and clone your external HD to your internal HD. SL restored!

  • How do I remove background and make it transparent?

    How do I remove background and make it transparent?

    The tutorial below shows you how to remove the background around a figure.
    For more simple images, you might try this tutorial, instead:
    I hope these help, and please let us know if you have any trouble with the steps!

  • How can i remove apps and notifications?

    how can i remove apps and notifications?

    To remove an app from your phone, hold down on the app until it wiggles and hit the X.
    For notifications, settings - notifications - the rest is self explanitory.

  • How do I remove locations and/or pins from maps on iphone 5

    How can I remove locations and/or pins from MAPS?

    A purple pin is a dropped pin. You access that from the "back" of the map, but touching the lower right corner of the map. It is a pin that is dropped in the center of the map you happen to be looking at at the time. If there is no description of the pin, touch the pin and it should show a label, and on the right side of the label there is a blue arrowhead. Touch that and it will provide an address/description of the pin's location and there should be other options, such as directions to here, from here, etc., and then one to remove the pin. Touch that and it should disappear.

  • How do i remove music and a resync my ipod shuffle

    how do i remove music and resync my ipod shuffle with new music

    You can't transfer music from an iPod to a PC.  Apple do not provide that facility.  It can be done with third party software though.  There are a variety of these available though so search google for 'ipod to itunes'.

  • I have the Dropbox App on my iPhone 5.  I don't need all of the photos, and my Dropbox is full.  How do I remove photos and, where do I move them to on my computer?

    I have the Dropbox App on my iPhone 5, for my photos.  I don't need all of the photos to be on my phone, and my Dropbox is full.  How do I remove photos and, where do I move them to on my computer?

    If you have DropBox installed on your computer, you should already have those images in a folder corresponding to the cloud folder structure. Simply copy the from there to any folder you wish them to be in.
    And, if you delete them from the dropbox folder, then sync dropbox, they will be removed from all of your devices.
    You might want to login to dropbox and have a look at the instructional tours.
    https://www.dropbox.com/gs
    or click on Getting Started after loggin in.

  • How can I remove asm and ocr installation in AIX?

    Hi,
    I try to install single instance with using ASM in AIX.
    But I did not make successfully.
    Now I want to remove ASM and OCR installation then
    I will plan to make new clear installation.
    How can I remove asm and ocr ??
    Or How can I control my removing is fully correct ?

    1) ASM Instance Clean-Up Procedures
    Stop all of the databases that use the ASM instance that is running from the Oracle home that is on the node that you are deleting.
    On the node that you are deleting, if this is the Oracle home which from which the ASM instance runs, then remove the ASM configuration by completing the following steps. Run the command srvctl stop asm -n node_name for all of the nodes on which this Oracle home exists. Run the command srvctl remove asm -n node for all nodes on which this Oracle home exists. If there are databases on this node that use ASM, then use DBCA Disk Group Management to create an ASM instance on one of the existing Oracle homes on the node, restart the databases if you stopped them.
    If you are using a cluster file system for your ASM Oracle home, then ensure that your local node has the $ORACLE_BASE and $ORACLE_HOME environment variables set correctly. Run the following commands from a node other than the node that you are deleting, where node_number is the node number of the node that you are deleting:
    rm -r $ORACLE_BASE/admin/+ASMnode_number
    rm -f $ORACLE_HOME/dbs/*ASMnode_number
    If you are not using a cluster file system for your ASM Oracle home, then run the rm or delete commands mentioned in the previous step on each node on which the Oracle home exists.
    2) Deleting an Oracle Clusterware Home Using OUI in Silent Mode
    !!! Oracle recommends that you back up your voting disk and OCR files after you complete the node deletion process.
    If you ran the Oracle Interface Configuration Tool (OIFCFG) with the -global flag during the installation, then skip this step. Otherwise, from a node that is going to remain in your cluster, from the CRS_home/bin directory, run the following command where node2 is the name of the node that you are deleting:
    ./oifcfg delif –node node2
    Obtain the remote port number, which you will use in the next step, using the following command from the CRS_home/opmn/conf directory:
    cat ons.config
    From CRS_home/bin on a node that is going to remain in the cluster, run the Oracle Notification Service Utility (RACGONS) as in the following example where remote_port is the ONS remote port number that you obtained in the previous step and node2 is the name of the node that you are deleting:
    ./racgons remove_config node2:remote_port
    On the node to be deleted, run rootdelete.sh as the root user from the CRS_home/install directory. If you are deleting more than one node, then perform this step on all of the other nodes that you are deleting.
    From any node that you are not deleting, run the following command from the CRS_home/install directory as the root user where node2,node2-number represents the node and the node number that you want to delete:
    ./rootdeletenode.sh node2,node2-number
    If necessary, identify the node number using the following command on the node that you are deleting:
    CRS_home/bin/olsnodes -n
    Perform this step only if your are using a non-shared Oracle home. On the node or nodes to be deleted, run the following command from the CRS_home/oui/bin directory where node_to_be_deleted is the name of the node that you are deleting:
    ./runInstaller -updateNodeList ORACLE_HOME=CRS_home
    "CLUSTER_NODES={node_to_be_deleted}"
    CRS=TRUE -local
    Deinstall the Oracle Clusterware home from the node that you are deleting using OUI as follows by running the following command from the Oracle_home/oui/bin directory, where CRS_home is the name defined for the Oracle Clusterware home:
    ./runInstaller -deinstall –silent "REMOVE_HOMES={CRS_home}"
    Perform step 9 from the previous section about using OUI interactively under the heading "Deleting an Oracle Clusterware Home Using OUI in Interactive Mode".

  • HELP! How do I remove Lion and reinstall Snow Leopard and my files

    HELP! How do I remove Lion and reinstall Snow Leopard & my files  BUT I just discovered my Apple Time Capsule which was using Time Machine DIED
    I had to go to MacMall and have the Time Capsule data transfered to a new BAK drive($300+$300)
    (The Apple Store sent me there as they said they do not do data transfer)
    Now what do I do?
    ? ?  One Senior advisor said that I will have to drag and drop the data file or files? from the Time Capsule BAK drive back to my iMAC but will that include all           the Snow Leopard operating system ?
    ? ?  Another senior advisor said I will have to wipe my hard drive then install Snow Leopard then "drag and drop",  ?  ??
    All my business leases, database, spreadsheets. letters, mail merge files, and so on are not available with Lion -
    I AM VERY ANGRY AS I NEVER SAW THAT WRITTEN ANYWHERE !!!
    I am seriously confused and I AM SCARED TO MAKE A MISTAKE-HELP !!
    WHAT DO I DO ?  AND   IN WHAT ORDER? PLEASE HELP!

    Your post is confusing to read too.
    It sounds like you still have your files on your Mac. Why do you want to back track to Snow Leopard on your Mac? Why can't you read your files from your Mac? If your files are on your Mac, why are you taking them off your broken Time Capsule? You don't have to install Snow Leopard to transfer your files back to your Mac. Maybe step back a bit and explain your situation a little better with details.  For instance, what's a BAK drive? Suggest you explain what you are trying to do?
    Before you do anything, create a backup of your Mac to another disk drive.. suggest you use Carbon Copy Cloner to make another copy of your Mac.

  • How can i remove videos and music that are not on my ipad mini but are still taking up space and are showing that they are there even after i've deleted them?

    how can i remove videos and music that have been deleted from the ipad but are still showing in settings as still being on the ipad?

    I believe that I have the same issue with iPad Mini with Retina Display, iOS 8.1. No matter which way I delete videos from my iPad, they will still show as "deleted", yet the space is not cleared up. I tried restore and then a full restore (clean setup as a new iPad) and it still does this to me. I can solve it by doing a restore each and every time I download a video and delete it. Rather frustrating. Has been a problem since day 1 of iOS 8. I'm yet to try the power+home button reset. It may very well work, but I am surprised that a "fresh setup" of an iPad didn't resolve it from ever occurring.

Maybe you are looking for

  • Is it possible to screen share an old iMac running 10.4 with a new Mac Mini running Yosemite

    Is it possible to screen share an old iMac running 10.4 with a new Mac Mini running Yosemite. I am trying to bring the old iMac screen up on the Yosemite system

  • Rendering problem

    I'm experiencing something similar, though it's with all multi-processing. I've tried exporting with both Quicktime (ProRes, Animation, etc) and with image sequences. No dice either way. I get an error dialog: Rendering Error: An Output module failed

  • Birthdays are not visible in calendar in 6300

    When I input a birthday in my Nokia 6300 under a contact it does not appear in my calendar. I seem to recollect that previously it would appear there and also show me the age of the person if I inputed the year of birth correctly. In other words if p

  • Setting for photo taking on N95

    N95 resumes the photo taking setting to default after I change for a particular photo, i.e., switch off flash, change to close-up mode, etc. Can someone advise me how to save the setting for future use. Thanks!

  • Any one implemented BADI :BADI_LE_SHIPMENT

    Hi all, Is anyone has implemented BADI: BADI_LE_SHIPMENT. I am trying to implement the method: AT_SAVE and i want to update: VTRLK. please let me know how should i implement AT_SAVE Method. Thanks.