How Do I Remove/Edit FTP setting in CFbuilder 3

I went through the Sync settings and now I don't how to change or delete the FTP servers

Thanks SDred,
Thant did help, but I must admit that I miss the ability to simply download/upload or synchronize. I find how they have setup CFB 3 cumbersome and not overly intuitive. My solution was to uninstall CFB 3 and the install Eclipse Lunar. I then installed CFB 3 as a plugin and then installed Aptana Studio 3 as a plugin, which through the Aptana App Explorer gives me my FTP transfer options back. I also find CFB 3 is faster and more responsive installed as a plugin.
Thanks.

Similar Messages

How do I remove edit markings from final document

How do I remove edit markings from final document? There are slash marks at the beginning of each row of typing and little arrowheads where I made changes to typing.

What program did you use to edit the document? If you used Word for Mac then you might want to ask your question in the Office for Mac foums http://answers.microsoft.com/en-us/mac?auth=1.
If you used some other program, you will need to tell us which one.

How do I remove a documentation set from Xcode?

I have documentation sets for Apple iPhone OS 2.0 and Apple iPhone OS 2.1. Each of these sets has iPhone OS Library and for the most part they are they same. Since I've decided to focus on targeting 2.1, is there any way I can remove the 2.0 documentation completely?
I can't find a way to do it from the documentation interface and in the Preferences, I can uncheck the documentation, but not delete it. However, unchecking it has no effect and when I restart Xcode, they are all checked again.
I am afraid to start deleting files from /Developer without knowing what I'm doing. I am also trying to avoid uninstalling and reinstalling everything.
Thanks!

I did try deleting
/Developer/Platforms/iPhoneOS.platform/Developer/Documentation/DocSets/com.apple.adc.documentation.AppleiPhone2_0.iPhoneLibrary
but that didn't seem to remove it from Xcode. Then I found
/Library/Developer/Shared/Documentation/DocSets/com.apple.adc.documentation.AppleiPhone2_0.iPhoneLibrary
The interesting thing is that the 2.0 documentation was "shared" here but not the 2.1 docs.
Removing the latter in the shared folders made it disappear from Xcode; removing the former had no effect. However its parent "folder" didn't disappear, but changed title slightly.
Before
Apple iPhone OS 2.1
.. iPhone OS Library
Now
Apple iPhone OS
.. <nothing here>
I'm now trying to figure out how to completelly remove that *Apple iPhone OS* heading as it contains nothing.

How do I remove a selected set of cells?

How do I remove or delete a selected set of cells (ex. rectangle of C1 to E26).
In Excel, I can delete such a group of cells and all the data to the right of those cells shifts over.
Is this possible in Numbers or should I just go back to Excel?

Michael Force wrote:
Thank you for your attempt to help. This does not work for me, perhaps because I failed to fully understand what Yvan is trying to say. You are saying I need to delete cells at the bottom of the column,
It's not what I wrote.
Assuming that you want to remove cells C12 thru C14, I asked you to select cells C15 thru C9999999 then move the selected block to cell C12.
Old cell C15 will become cell C12
Old cell C16 will become cell C13
Old cell C17 will become cell C14
Your problem is different than the original one which was:
I want to delete a range of cells in a single column, say for instance 3 cells, and have the entire column shift up 3 cells.
and I'm not sure that the "Delete cells" function of Excel will do the trick.
I assumes (because you didn't give the complete info) that you want to remove cells C12 thru C14.
Select cells C15 thru C40, move the block to C12.
Old cell C15 will become cell C12
Old cell C16 will become cell C13
Old cell C17 will become cell C14
Old cell 40 will become cell C37
cells C38, C39, C40 will be empty.
Yvan KOENIG (from FRANCE lundi 17 novembre 2008 11:59:29)

How can I remove the pro setting from my quicktime?

Due to moving classes in labs, I must downgrade from QT 7.04 Pro. Does anyone know which files I must remove to go back to non-pro quicktime? Thanks!

I tried to enter a different code, but the pro settings return the next time I open the Quicktime prefs. It's registered to "Apple Pro Apps User" and The code is a greyed-out "Automatic".
Ah, so. Then it sounds like you need to "un-install" the associated software (like possily FCP) that is providing Pro registration access -- the two go together. QT Kirk would probably much more familiar with this nuance than I..

How can I temporarily remove a RAID set but keep the data?

I recently had to restore my Netgear ReadyNAS to factory settings, which meant that I needed to make a backup of its data and restore it afterwards. The only possible way to back up the 8.5Tb of data was to get 9Tb of WD Red disks and somehow use them - so my immediate thought was that the Mac Pro would be a good idea. I t had four drives in it, but three of them were not being used by the OS so they could be temporarily removed.
So I replaced three of my four Mac Pro drives with new 3Tb drives and used Disk Utility to set them up as a JBOD. I then used this JBOD drive to back up the NAS and restore it again after I had re-installed its O/S (the whole thing took two weeks!!!).
So now I'm in the following situation:
* I want to tear down the JBOD set and take the three new drives out of the Mac Pro again and replace them with the drives I normally use there so that I can go back to making music (which is what I usually use it for).
* I also want to be able to put the new drives back in and read the data as a JBOD again if needed (in case anything is discovered to be amiss with my ReadyNAS backup/restore operation) - let's say for the next month I'll plan to keep the old drives around for safety.
How can I remove the JBOD set in such a way that I can set it up again using the same drives, and access the data (i.e. I don't want to delete the RAID set the usual way because that will delete the data too - apparently...)?

Going to ask the mods to move this to MacPro, Hatter can answer your question, but I'm pretty sure if you power down and remove the RAID drives, you can put them in back again and boot up and the RAID will still be recognized as the info is stored on the drives themselves in the GUID/MBR of each drive in the set.
Also you should know, there is a new MacPro coming and it doesn't accept internal drives, only external.
So you should prepare and have some sort of external hardware redundancy for your data that isn't dependent on the Mac HFS+ formatting as Windows doesn't read that.
Perhaps exFAT would be better as both platforms can read/write that, but if the drives are going to be used with a PC ever, they need to be formatted by Windows for exFAT to get it right. Check first before you commit to copying huge data over.
Anyway research it, because if your MacPro dies, you might be up the creek and have some issues getting at all that data since it's in a RAID, external options might not work correctly or reliably for RAID.
Also consider talking to the fellows at MacGuru's, they are external RAID box setup experts for Mac's, sounds like you need a RAID 5 box, gives redundancy and can connect to any computer.
Hardware RAID is more reliable than software ones, cross platform as well.
good luck.

How do I remove an old apple ID off an iPad when you don't have the original user's log in information?

Hi, my company has recently started issuing techs iPhones and iPads. I have an iPad here we got back from an employee after termination. He gave me his 4 digit passcode to get into the iPad, I removed the passcode to unlock, and did a reset on the device. Turn it on, I get the "Hello" screen and the initial set up pages. I get to the page with "input your Apple ID" and when I tried to enter a new ID, it wouldn't accept it because the device had already been associated with a different Apple ID. The prompt it gave was to log in online with the original Apple ID and remove the device. Well... can't do that since the employee is long gone and that's not going to happen. So what do I do here? How do I remove it to set up a new Apple ID?

Without the ID/password, you won't be able to use it. Suggest you take it to an Apple store. They may have some advice.
Make a Genius Bar Reservation
http://www.apple.com/retail/geniusbar/
Next time, they should do this:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/HT5661
If the iPad was running iOS 7, iCloud: Find My iPhone Activation Lock in iOS 7
http://support.apple.com/kb/HT5818
iCloud: Activation Lock
http://support.apple.com/kb/PH13695
Find My iPhone Activation Lock: Removing a device from a previous owner’s account
http://support.apple.com/kb/ts4515
Buying or Selling a Used iPhone or iPad Running iOS 7? Read This First!
http://www.makeuseof.com/tag/buying-or-selling-a-used-iphone-running-ios-7-read- this-first/
 Cheers, Tom
Message was edited by: Texas Mac Man

I joined a website using an id with a name using small letters. Firefox has automatically put a capital in my id. How do I remove it? The website is case sensitive and won't allow me in with my id with an initial cap?

I joined a website with my id in all small letters. Firefox has automatically made it with an initial cap. The website is case sensitive and will not allow me in. How do I remove the automatically set id password and start over so that I may have access to that web site? Thanks.

I have decided to dedicate this thread to the wonderful errors of Lion OSX. Each time I find a huge problem with Lion I will make note of it here.
Today I discovered a new treasure of doggie poop in Lion. No Save As......
I repeat. No Save As. In text editor I couldn't save the file with a new extension. I finally accomplished this oh so majorly difficult task (because we all know how difficult it should be to save a file with a new extension) by pressing duplicate and then saving a copy of the file with a new extension. Yet then I had to delete the first copy and send it to trash. And of course then I have to secure empty trash because if I have to do this the rest of my mac's life I will be taking up a quarter of percentage of space with duplicate files. So this is the real reason they got rid of Save As: so that it would garble up some extra GB on the ole hard disk.
So about 20 minutes of my time were wasted while doing my homework and studying for an exam because I had to look up "how to save a file with a new extension in mac Lion" and then wasted time sitting here and ranting on this forum until someone over at Apple wakes up from their OSX-coma.
are you freaking kidding me Apple? I mean REALLY?!!!! who the heck designed this?!!! I want to know. I want his or her name and I want to sit down with them and have a long chat. and then I'd probably splash cold water on their face to wake them up.
I am starting to believe that Apple is Satan.

How to remove Editable region from nested template?

I'm trying to remove an editable region from a nested
template while retaining it in the parent template. DW doesn't want
to let me do this.
Example:
- I've created an overall template call ALLPAGES.DWT
- In it, there's an editable region called "related links".
- The "related links" will stay the same for all my main
pages (welcome, news, info, etc), so I'd like to create a nested
template called MAINPAGES.DWT where the field is locked.
So here's what I did; I started a new page from ALLPAGES.DWT
and then I created a template MAINPAGES.DWT from it. Now I want to
remove the editable region "related links". According to the DW
manual, I should be able to highlight the region and go to
Modify > Templates > Remove Template Markup, but that
option is greyed out!
Apparenlty the only way of removing the editable region is to
create a smaller editable region within it. But that's unnecessary
and sloppy. How can I remove the region entirely?

> This use of nested templates is very useful and very
simple and
> straightforward.
> It involves no additional overheads, and introduces no
reliability
> problems.
I really disagree with this.
> I cannot understand why Murray has such a bad attitude
to nested
> templates.
I spent quite a bit of time using them, tweaking them,
understanding them,
and watching the problems that others have had here on the
forum. My
compelling conclusion is that there is nothing you can do
with nested
templates that you cannot do more simply and with far less
trouble by using
other methods, some involving other kinds of template
regions, and some
involving simple use of Library items, or better, server-side
includes.
> I can only assume either that he had a bad experience on
the road to
> Damascus,
> after writing his definitive book on templates
I assure you, it's based on much more study and experience
than you have put
into it.
> "Templates are wicked and sinful! Don't play with them,
or you will go
> blind!"
This is not only unkind, it's completely erroneous. Far and
away, I am the
single most enthusiastic proponent for the use of templates
on these boards.
Perhaps a read of my book would help you rid yourself of your
attitude, too.
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Clancy" <[email protected]> wrote in message
news:[email protected]...
> "Dodgeit" <[email protected]> wrote:
>
>>I'm trying to remove an editable region from a nested
template while
>>retaining
>>it in the parent template. DW doesn't want to let me
do this.
>>
>> Example:
>> - I've created an overall template call ALLPAGES.DWT
>> - In it, there's an editable region called "related
links".
>> - The "related links" will stay the same for all my
main pages (welcome,
>> news,
>>info, etc), so I'd like to create a nested template
called MAINPAGES.DWT
>>where
>>the field is locked.
>
> Very simple:
>
> Open allpages.dwt.
> Save as template, with name mainpages.dwt (I always do
this immediately so
> that
> if I do something stupid I don't corrupt the original
template).
> Insert the desired content into "related links".
> At the beginning of the content area of "related links"
insert the magic
> code
> @@("")@@
> This turns off the editable region, and there will be no
reference to it
> in
> pages derived from this template.
> Save the changes to mainpages.dwt
> Done!
>
> Have a look at
>
>
http://www.corybas.com/Technical/Nested.htm
> This is derived from my template techpage.dwt, which in
turn is ultimately
> derived from my template basicpage.dwt.
>
> Basicpage.dwt defines two editable regions 'title' and
'subtitle' at the
> top of
> the page. Techpage.dwt sets a fixed title for all my
technical pages, as
> follows:
>
> @@("")@@Roger
> Riordan: Technical notes
> Notes
>
> In the page Nested.htm the references to 'title'
disappear, and the two
> lines
> appear as
>
> Roger Riordan: Technical
notes
> Nested
> Templates
>
> This use of nested templates is very useful and very
simple and
> straightforward.
> It involves no additional overheads, and introduces no
reliability
> problems.
>
> I cannot understand why Murray has such a bad attitude
to nested
> templates. I
> can only assume either that he had a bad experience on
the road to
> Damascus,
> after writing his definitive book on templates, or that
it says simply:
>
> "Templates are wicked and sinful! Don't play with them,
or you will go
> blind!"
>
>
> Clancy

How can I remove print margins when manually setting them to zero doesn't work?

I'm trying to print a web page that I've created with a custom paper size of 4.5x10.25 inches. I want the page to be printed right to the edge of the paper, with no margins at all.
I've been reading for a few days and the best thing I can find is to use Mac's Page Setup dialog to create a custom paper size and custom margins, which I've done and set to the default for all of my printers. (Hopefully I'm able to post links to images --> http://i.imgur.com/kVbOZLk.png). No matter what I do though I can't get the margins to go away. There's always always always a .75 inch margin when I print and when I print preview (Again, hoping I can post links to images --> http://i.imgur.com/cxlVS8o.png). Just to note: The same thing happens printing other websites and documents (i.e it is not a problem with my website).
Things I've tried:
I've read that the margins are only visible in print preview and printing the page will remove them. This didn't work.
I've tried tricking the system by setting my margins to 0.01 inches
I've tried adjusting the website to not be exactly the size of the page (I made it smaller) and the margins were still there.
I've set "print.print_extra_margin" to 0 in Firefox's about:config page.
I've tried a different printer.
I've tried a co-worker's machine running a newer version of OSX.
I've made absolutely sure that my page size it set correctly.
I'm using OSX 10.6.8 with Firefox v21.0.
The closest I can come to this is using Google Chrome, where there is a specific option for "none" in margins and the Chrome preview looks okay, but I'm not able to specify paper size unless I click "Print using system dialog" which gives me the same problems as above.
How do I remove the margins and just fit to the exact size of the page?

Welcome to Apple Support Communities. We're all users here.
Does your Print dialog offer photo 'borderless printing' settings for various paper sizes?
Every photo printer I've ever encountered leaves some unprintable margin, unless 'borderless' and/or 'photo' media are specifically selected.
On many of the Canon inkjet color printers I've used, borderless printing is only available when one of the photo papers is selected, even when a custom size specified that is smaller than the actual paper, trying to make it 'borderless'
I stitch together and print panoramas of theatre sets for my local community theater, so I end up with an image about 4.5 inches by 11.5 inches to be printed.
Selecting a photo and opening in Preview and selecting 'Fill Entire Paper' illustrates the standard unprintable borders for my specific printer.
When I open the panoramic image in Preview, I get this print preview. (The set image is of course rotated left)
By selecting Letter and Borderless in the Paper Size dialog for my Canon MG5320 printer, I get this result.
This particular Canon printer of course does NOT actually 'know' what paper is inserted, but the ink is applied assuming that a photo paper is being used, so it will saturate a standard paper.
Hope this helps!
Message was edited by: kostby

How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

How do I remove an alert for a calendar item that has long since been deleted? and yet goes off mysteriously, un-deletably, and un-editably every single ****** week !!

I have the same problem with my iPhone. I set up a recurring calendar event for every Thursday. That event is no longer happening during the summer, so I went in and chose one from the current month and selected Delete. Then it gve me two choices, one of which was to Delete All Future Events of this one, and that's what I chose. I figured, this way, I'll still be able to see the ones from the past, but won't have to see (or hear the alert) for the future ones.
The following week, my phone alerted me to the appointment, and even showed it on the initial screen, even though it wasn't in the calendar. I went in to the calendar and NOTHING was scheduled for that day. So why is this happening?
So I set up a new recurring event, for in the past, then went in and deleted all furture occurances, and it did the same thing... still alerted to an event that was no longer in the calendar.
I hope somebody else has found a fix, or at least a reason for why this is happening.

When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

When I set up email for the first time, I had to enter a 4 digit pin. Since then, every time I switch my phone on, I have to enter this pin. How do I remove or bypass the pin so that I can switch on the Iphone without having to first enter a pin?

Go to Settings>General>Passcode Lock>tap Turn Passcode Lock Off, enter your "pin".
Edit: Are you saying you are getting a prompt for your email pin, or are you talking about the passcode lock that appears when you turn the phone on?

In mail, a picture was set up to send with my e-mail. How do I remove it?

In mail, a picture was set up to send with my e-mail. How do I remove it?

Hi,
It isn't really sending it, it will only be seen if you're in their Address Book... & you are in yours.
Obnoxious that you can't just turn it off, but you can replace your pic in Address book with a tiny all white .gif.by finding you in AB, highlight it, click edit, highlight the pic &n Paste a white gif there.

How do i remove my old Apple Id from iPhone's iCloud setting which does not exist anymore

Purchased new iphone 5s, installed with itunes restoring backup from iphone 4 (which was too old a backup). It restored an old apple id (which i do not use anymore) in the iCloud settings while having my new Apple Id in the Itunes & App Store. I cannot turn off the iCloud setting due to old AppleId popping up - which does not exist.. How do i remove the old Apple Id from icloud setting on the phone.
I cannot erase the phone as it asks for the password for the old Apple Id. And i cannot do the restore again (after i made a recent back up my iphone 4) as itunes asks me to turn off Find my phone.

The Apple ID exists. The email address you used to create it may not, but the Apple ID does. Call AppleCare and ask to speak to someone in account security.

How do I remove an unwanted toolbar? I added a radio station to my ibook and it set up its own toolbar so when I go to Safari I have to use it. It involves using Bing for everything as well. It's very annoying and I want to remove it.

How do I remove an unwanted toolbar? I added a radio station to my ibook and it set up its own toolbar so when I go to Safari I have to use it. It involves using Bing for everything as well. It's very annoying and I want to remove it. I can't just type in a URL and have it go to the site. It takes me to all of Bing's choices. Also, when it anticipates what I'm typing (incorrectly) and I have to delete it's guesses all the time. Can anyone help?

Have you looked at Safari's menu bar > view> toolbars to see if it can be unchecked from there,also see if there is a button to collapse the toolbar on the bar itself.

How Do I Remove/Edit FTP setting in CFbuilder 3

Similar Messages

Maybe you are looking for