How do I remove empty timelines?

I have captured files from my Sony HandyCam HD and placed them on a timeline, however they appear on Video track 2 leaving Video 1 track empty. I have tried to delete by right clicking but with no success.
Because having two timelines on screen it doesn’t allow the preview window full vision for editing.
Can anyone help resolve my issue?

Eddie
Sony HDR-PJ540E
You need to verify, but the camera is probably recording AVCHD 1920 x 1080 with that 5.1 channel audio.
When you open Premiere Elements 7, you should be greeted by the new project dialog. The project preset is set there. And, by
default is NTSC DV Standard in a NTSC setup and PAL DV Standard in a PAL setup. Click on "Change Settings" in that new project dialog.
That project preset should be set to match the properties of your source video. So, assuming NTSC set up for now, set the project preset
in the new project dialog to
NTSC
AVCHD
and then select/highlight
Full HD 1080i30 5.1 channel
Click OK to continue.
You now should be able to put your AVCHD with 5.1 channel audio on Video 1/Audio 1.
We will be watching for your results.
Thanks
ATR
Add On...To verify the frame rate, after you import the file into the project, go to Edit Header/and in row below, Project.
Right click the file's thumbnail in Project, select Properties, and read the frame size there.

Similar Messages

  • How can we remove empty space created in the flat file unintentionally

    Hi Forums,
    In our data flow, transactional data is flowing from one ODS(Acquisition Layer) to two different ODS's(Integration Layer) parallely. Error occured in first ODS(Acquisition Layer) i.e ODS was not getting activated for long time coz of empty space[#] in one of the infoobjects of a particular record. After manually deleting the request in two ODS's of Integration Layer & edited that particular record in PSA and reconstructed that deleted request form PSA the problem was solved.
    This wrong entry is getting visible only at the time of ODS activation. Can any one suggest me a permanent solution for not occuring of empty space at the source system level or at SAP XI interface level or in the SAP BW system level?
    Thanks in advance

    Hi,
    If your ino object is of numeric type then check the condition if it is # (empty) then
    replace with 0 (zero), if it is char. then make it SPACE..you can use this following statement in your transfer / update rule for the IO.
    replace all occurances of '#'  with ' '.  (for Char.)
    (for Numeric)
    if COMM_STRUCTURE-XXXX is initial.  
    RESULT = 0.
    endif.
    Hope it helps..
    assign points if useful.
    Cheers,
    Pattan.

  • How do I remove empty space combo box

    My promblem is that I have empty space between selected option and the other option Below are code i used to build this combo box .This combo box display list of possible user of the system and selected option show to the currrent user of the system. Code are
    <%      sql_query = "SELECT em_num, em_name, dfu_usr_id "+
                                            "  FROM dfusrf, emmast "+
                                            " WHERE dfu_emp_id = em_num "+
                                            " ORDER BY em_name ";
                               try{
                                      rset = db.execSQL(sql_query);
          while ( rset.next()){
               String em_num2 = rset.getString("em_num");
              String em_nme2 = rset.getString("em_name");
                                  %>
         <option value="<%= em_num2 %>">
         <% if ( em_num2.equals(em_num) ){%>
         <option value="<%= em_num2 %>"selected>
                          <%=  em_nme2 %></option>
         <%} // end if
         %><%= em_nme2 %></option>
        <%} // end while
      } // end try
      catch ( Exception e )
        System.err.println("Error in query -  emmast2 - transaction_main.jsp " +e.getMessage() + " sql " + sql_query);
      finally
        if ( rset != null ) rset.close();
    %>
    </select>

    while ( rset.next())
         String SELECTED = "";
         String em_num2 = rset.getString("em_num");
         String em_nme2 = rset.getString("em_name");
         if ( em_num2.equals(em_nme2) )
              SELECTED = " SELECTED ";
    %>
         <option <%=SELECTED%> value="<%= em_num2 %>"><%=  em_nme2 %></option>
    <%
    } // end while

  • Remove "Empty Demarcation"

    How can I remove "Empty Demarcation" in the Text Elements. When I don't pass value(optional variable) to web template it shows "Empty Demarcation" in the report text elements, I want to convert into blank or "ALL".
    Should be grateful for any futher information
    regards
    supriatna

    Hi Heike,
    I had change text 301 become "All" and make SAPLRRSV active but "empty demarcation" is still show in the web,
    any other suggestion.
    I think the system not directly changes the text in the web after 2 day the changes run correctly, 
    btw thanks Heike for your post.
    thanks
    supriatna
    Message was edited by: BW - xltrs

  • How do I remove an empty gmail folder from my iPad2?

    How do I remove an empty gmail folder from my iPad2?

    I Think that you had a corrupt email or an email with a really large attachment in that folder and it is now causing the mail app to crash. When the app closes and goes back to the home screen, that is an app crashing. I would try to delete this folder on the server. Log into your Gmail in a web browser and try to delete it there. If you delete it there, that will delete it on the iPad.

  • How can i remove the empty sting from IList collection?

    How can i remove the empty sting from IList collection. If i use the code i got  System.NotSupportedException was unhandled exception. How can i achive this?
    IList record = (IList)records;
    int count = record.Count;
    for (int i = 0; i < count;i++)
    bool contains = record[i].Equals("");
    if (contains)
    record.Remove(record[i]);
    Is anyone know, please suggest me.
    Thanks in Advance!

    Try:
    items.RemoveAll(s => string.IsNullOrEmpty(s));
    Or you can filter them out using where:
    var noEmptyStrings = items.Where(s => !string.IsNullOrEmpty(s));
    Having fun with custom collections!
    Basics of .NET Collections in C#
    How does it work in C#? - Part 3 (C# LINQ in detail)
    Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

  • How to remove  'Empty Demarcation'  in Text Elements.

    Dear All,
    To remove 'Empty demarcation' in the WAD output, I had modified the standard program - SAPLRSSV (for this i took  access key from SAP). 
    The text element : 301 was changed to blank  and it worked.
    Recently we had a support package upgrade to SAPKW70018. With this upgrade my previous change to the program got reverted back and so i need to do the change again.
    However,  I'm not able to retrieve the list of Text elements for this program (SAPLRSSV). I open the program and when i go to Text element,  following message is displayed :
    "Untranslated texts from master language DE will  also be displayed"
    But no list (no text elements) is displayed.
    My question : How do i retrieve this list  and can i use the same acess key again or do i need to take another one from SAP.
    Regards,
    Nagendra.

    Sorry, I was referring to the incorrect program SAPLRSSV instead of SAPLRRSV.  The problem has been resolved.
    Regards,
    Nagendra.

  • How to remove empty row from rfc table output.

    Hello,
      I am using adaptive rfc and printing table output. The table rows start from 2nd row, the first row being empty. How can I remove the empty first row.
    Here is what I tried.
    wdContext.nodeDataSource().nodeTableOutput().moveNext();
    and
    wdContext.nodeDataSource().nodeTableOutput().moveTo(1);
    Neither of them worked. Any clue is appreciated.
    Srinivas

    IWDNodeElement first = wdContext.nodeDataSource().nodeTableOutput().getElementAt(0);
    wdContext.nodeDataSource().nodeTableOutput().removeElement(first);
    Armin

  • How To Remove Empty Node From Source XML

    Hi,
    How can I remove an empty node from the source xml in a XSLT mapping.
    For e.g. If the source xml is like:
    <SRC>
    <Node1>SAP</Node2>
    <Node2/>
    <Node3>XI</Node3>
    </SRC>
    Then the xml should become:
    <SRC>
    <Node1>SAP</Node2>
    <Node3>XI</Node3>
    </SRC>
    I need to do this because the output of my XSLT mapping is showing blank spaces for each blank node.
    Thanks,
    Abhishek.

    Use <xsl:if>
    Or else you may find different options here
    http://www.dpawson.co.uk/xsl/sect2/N3328.html#d4804e304
    Regards,
    Prateek

  • I have 9,046 emails in my inbox. I was messing with the setting to try to empty the inbox (100 emails) in one hit and somehow .... how do I remove them all.

    I was messing with the setting to try to empty the inbox (100 emails) in one hit and somehow I managed to get 9,046 emails in there.... how do I remove them all?

    Hans M wrote:
    If there is no other solution this Problem should be forwarded to the developers.
    Feel free to do that:
    http://www.apple.com/feedback

  • HT1937 I wanted to know how i can remove my account information off my iphone, because i keep trying to update my apps and it asks me to fix my billing information seeing as my card is now empty at the moment, it acts as if my updates cost money.

    I wanted to know how i can remove my account information off my iphone, because i keep trying to update my apps and it asks me to fix my billing information seeing as my card is now empty at the moment, it acts as if my updates cost money.

    Hi Broken Smoke,
    Welcome to Apple Support Communities.
    You can change the iTunes Store information associated with your Apple ID, and select None as your payment option. See the steps in this article for help:
    iTunes Store: Changing account information
    http://support.apple.com/kb/ht1918
    Changing your account information using an iOS device:
    Tap Settings on the Home screen.
    Tap iTunes & App Stores.
    Tap on your Apple ID. (If you are not signed in, enter your Apple ID and password, and tap Sign In.)
    Tap View Apple ID.
    Enter your Apple ID password.
    To update your name, billing address, or payment information, follow these instructions:
    In the Edit section, tap Payment Information.
    Update the information that you want to change.
    Tap the Done button when finished.
    Have a great day,
    Jeremy

  • A new empty bar has appeared since I updated to Firefox 17.0.1, what is it and how can I remove it?

    An extra empty search bar has appeared on the my browser under the address bar. On the other side there is a 'manage your toolbar settings' spanner that has appeared and when I click it nothing happens.
    How do I remove the bar?

    Add-ons > Extensions
    What do you have installed which you don't recall installing?
    Or troubleshoot your extensions to discover which extension added that toolbar. <br />
    http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes

  • How do I remove the first ten seconds of my timeline?

    How do I remove the first ten seconds of my timeline? I wanted to have some leader time for video tapes but not I want to get rid of it.  Do I have to drag all the clips and move them or is there an easier way?

    If I understand correctly, you don't want to remove the first 10 seconds but rather insert the leader in front of all the content already in the sequence.
    There are several ways. I recommend the aptly named Insert command.
    In the Timeline, move the playhead to the beginning of the sequence.
    In the Project panel, select the leader; alternatively, load the leader into the Source Monitor.
    Execute the Insert command. You can do this severals ways. My favorite is the shortcut key: comma.

  • When trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.

    when trying to download yosemite it sais that i do not have enough memory. when i look at my memory use it shows that 111.00gb of space is used by movies but when i go th the movie folder it is empty. how can i remove the non existant movies.

    Freeing Up Space on The Hard Drive
      1. See Lion/Mountain Lion/Mavericks' Storage Display.
      2. You can remove data from your Home folder except for the /Home/Library/ folder.
      3. Visit The XLab FAQs and read the FAQ on freeing up space on your hard drive.
      4. Also see Freeing space on your Mac OS X startup disk.
      5. See Where did my Disk Space go?.
      6. See The Storage Display.
    You must Empty the Trash in order to recover the space they occupied on the hard drive.
    You should consider replacing the drive with a larger one. Check out OWC for drives, tutorials, and toolkits.
    Try using OmniDiskSweeper 1.8 or GrandPerspective to search your drive for large files and where they are located.
    You will need a minimum of 10-12 GBs of free space to install Yosemite, however, that is a bare minimum and should be at least twice that amount.

  • HT4847 HOW DO YOU REMOVE PHOTOS FROM THE CLOUD. ie EMPTY THE CLOUD

    HOW DO YOU REMOVE PHOTOS FROM THE CLOUD. ie EMPTY THE CLOUD

    If you mean delete those from taking space in backup, you can turn off camera roll backup.
    iCloud: Managing your iCloud storage - Support - Apple

Maybe you are looking for