How do I remove errors shown on my PC in Devices and Printers in Windows 8.1 Pro

Here is what I see
Obviously I get anumber of error when trying to print or after printing.
This question was solved.
View Solution.

I'm not able to see the "Printers" section in the screen shot but it appears that the printers did not install properly.
The Properties box for your HP LaserJet says : "The Drivers for this device are not installed".
If you recently updated to Win8.1 from Win8 it's likely that you need the new Win8.1 software drivers.
If that's the case then uninstall, reboot, then re-install both of your printers using the HP Win8.1 software drivers.
I would also install any Firmware Updates that are available for those models as well.
HP Driver Downloads

Similar Messages

  • HT5622 We have two iphones with the same Apple ID. Since I installed iOS this morning I have started receiving all my sons texts and when I send him a text it is delivered to both of us. How can I remove my phone from the joint Apple ID and remove myself

    My son and I both have iphones with the same Apple ID. Since I installed iOS this morning I have started receiving all my sons texts and when I send him a text it is delivered to both of us. How can I remove my phone from the joint Apple ID and remove myself from finding out what he is up to during Freshers week!

    You have to use a different Apple ID for your son.
    Read this note:
    iOS 5 & iCloud Tips: Sharing an Apple ID With Your Family
    still valid for ios 7

  • How do I remove an incorrect apple ID from an iPad and replace it with the correct one?

    How can I remove an incorrect Apple ID from my ipad and replace it with the correct one?

    Hello Shy guy,
    You can try this:
    1. Go to the iTunes Store or App Store
    2. Scroll down, there you will see Apple ID: "your email" (below Redeem and Send Gift)
    3. Tap on that button
    4. Tap on Sign Out
    Now you should be able to use another Apple ID.
    Cedric

  • How can i remove them from my purchased(no hidden them)and my account for ever?

    hello
    I got a few free app before and did not download them completely and dont want to do this,
    but they stay in my purchased and start automatly when i connect to itunes store and going to crazy me
    How can i remove them from my purchased(no hidden them)and my account for ever?
    (I want to delete all free apps and Books from my purchases.)
    please help me
    thank you.

    There is no way to do it. Others have asked for the very same thing that you are asking for, but currently it just cannot be done. You can't remover purchases from your Purchase History - you can hide them - but you can't delete them from the history.
    You can delete the Apps from the iPad and you can delete them from iTunes on the computer. Delete them from iPad, delete them fromiTunes so that when you sync there is no chance that they will come back. Then hide the purchases. That's the best that you can do.
    On the iPad, tap and hold down on the app icons until the X pops up. Tap the X to delete the apps.
    In iTunes, clcik on Apps under the Library heading on the left. Right click on the apps that you want to delete and follow the prompts.

  • How do I remove my credit card information from my ipad and iphone

    How do I remove my credit card information from my ipad and ipone account?

    Nice idea, but no.  You are no longer allowed to remove it, it will keep asking you for a valid account and won't let you save it with anything less.  So if your account has been hacked from iTunes (like mine has in the past, to the tune of several thousand dollars), and you don't want to keep a credit card on file, just add it in and delete it when you are done buying something, this is no longer an option.  Since I stupidly wanted to buy something and didn't know this had been changed, I now get to hope my account does not get hacked again.
    I am so sick of Apple making everything so bloody difficult, I'm about this close to ditching my iphone and ipad.  They are fabulous when they work, but if you have software problems (my ipad is currently a very expensive book reader, since it won't do anything else with any reliability after going to iOS 6), there is no help available, and no fixes available.  Help online just sends you in endless circles, help on the phone is useless if you have not paid for a service contract.

  • How do I remove my apple id from my sons ipod and give him his own??

    How do i remove my appl id from my sons ipod and give him his own

    Create an Apple ID for your son...
    Sign out of your account and get him to sign in with his new account...
    Bear in mind that any Apps Purchased with your ID will not be able to be Updated with his ID...
    The Apps are locked to your ID...
    Apple ID FAQ
    http://support.apple.com/kb/HE37

  • How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

    How can I remove a person's face from a photo and then replace the spot with a person's face from another photo?

    In Editor, go to the expert tab.
    Open picture B, the one you wish to select the "replacement" face from to add to another picture.
    Use one of the selection tools, e.g. selection brush, lasso tool, to select the face. You will see an outline ("marching ants") once the selection is complete
    Go to Edit menu>copy to copy the selection to the clipboard
    Open picture A, then go to Edit>paste
    Use the move tool to position the face from picture B to cover the face on A
    In the layers palette you should see picture A as the background layer, and face B on a separate layer

  • How do you resolve error 213:11 for photoshop elements 9 and 8

    how do you resolve error 213:11 for photoshop elements 9 and 8?

    Hi,
    Please refer to:
    http://helpx.adobe.com/creative-suite/kb/error-store-does-not-allow.html
    Thanks,
    Anwesha

  • How do I remove one failing hard drive from raid set and replace with new one

    Last Friday apparently one of my raid drives started failing.
    As I mentioned on this forum I started getting continous beeping.
    I was finally able to get the raid working at a degraded level.  I ordered a replacement hard drive which is arriving today.
    (In the meantime I made twice daily backups of my work.....)
    Below was the message I got from the browser based raid software:
    Blahblah 09    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 10    1000.2GB     Free                 SamSung HD103SJ
    Blahblah 11    1000.2GB   RaidSet Member SamSung HD103SJ
    Blahblah 12    1000.2GB   RaidSet Member SamSung HD103SJ
    (See this earlier thread if you wish!)
    http://forums.adobe.com/thread/727867?tstart=0
    At one point when I did the checked the browser interface I saw the message Failed and Degraded
    As I said, I was able to work over the weekend on the degraded system.
    This morning I got the beeping again and did the rescue and now I am running a "full raid" without the notice that one raid was "Free".
    In any case, the new hard drive is arriving today.
    What steps should I take to incorporate the new drive into the raid system.
    I have one OS drive
    and 4 tb raid drives.   One needs to be replaced with the new one that I am getting today.
    Thanks
    Rowby

    Harm,
    Regarding your comment:
    Re: How do I remove one failing hard drive from raid set and replace with new one
    Please tell me how to read the serial number from an individual drive rather easily, without un-installing them:
    If you select the proper drive to change out, you only need to remove one drive and look at its serial number...
    Step 1: Identify bad drive serial number using Areca's tools
    Step 2: Turn off the computer
    Step 3: Remove what you think is the bad drive based on following your numbered cable method, marked hot-swap bays, whatever
    Step 4: Verify that the serial number matches the "bad drive" serial number from step 1; if it does great, proceed; if it does not match, go back to step 3
    Step 5: Change out the CORRECT drive - that's the bottom line for this whole procedure
    Cheers,
    Jim

  • How do you remove the SIM card from one iPhone 5 and place it in another?

    how do you remove the SIM card from one iPhone 5 and place it in another?

    With a paper clip?  Refer to the User Guide.

  • How do I remove a song that is on my device but not in my selected library?

    How do I remove a song that is on my device but not in my selected library?

    There is no way to delete songs from an iPod.
    Nothing will be touched on your iPod in regards to iTunes content with the first sync with iTunes on your new computer if you transfer your iTunes library from your old computer to your new computer following the simple instructions included with the link provided. Certainly as a Windows user you maintain a backup for all important data which should include your iTunes library? Important regardless the platform but even more so with Windows due to constant virus, adware, and spyware concerns. Or do most Windows users start with a new computer from scratch without transferring any data from an old computer to a new computer due to constant virus, adware, and spyware concerns?
    iTunes includes an option to transfer iTunes content that was purchased from the iTunes store only from an iPod - really. As the largest distributor for music and as #1 by far in MP3 player sales, this is required by those who own the distribution rights for the music. Part of an effort to prevent or minimize stealing music by those who own the distribution rights. 

  • How to see full HP icons in Devices and Printers Win 7?

    THis post is long because I've included all of the clues for analysis, so please read it all the way through.
    My HP printer devices - an OfficeJet Pro L7600 All-In-One and a DesignJet T120 - show the same behaviour. In Devices and Printers on my primary desktop PC, they appear and work correctly, but their icons are the default Windows printer icon. I want them to be the device-specific HP icons that I know exist.
    The printers are connected over the network.
    I have tried going into the properties of the printer by right-clicking the default icon, but there is no option to change the icon. I have tried dragging the icon out to the desktop, but this creates a new shortcut which, although I could change its icon (if I knew where to find it), I don't want a second route to the printer and, reading below, you'll see that it's not necessary.
    I made the All-In-One available on a laptop. This instance of the driver appears in the D&P of my desktop machine as "HP L7600 on XXX-LAPTOP". The icon is not the default icon, but the correct icon - an anatomically correct picture of the All-In-One. So, the D&P window can see the full icon, but only from another machine.
    Also, I have a Brother All-In-One for 11X17, also connected on the network. It shows the correct icon from Brother. Therefore, I interpret the problem as originating with an HP-specific bit of code.
    How can I get the proper icons to display?

    Hello RexWave,
    Welcome to the HP Support Forums.
    After reading your post I see that your Officejet Pro L7600 & DesignJet T120 icons do not display with the correct image of the printer but as a default printer icon. This is usually caused by the method the printers are installed. I can speak on behalf of the L7600 only as the DesignJet T120 is a Commercially supported printer. I would suggest you post that question there.
    Regarding the Officejet Pro 17600 though you can remove the printer from Devices and Printers. Next you want to add the L7600 using the printer software installed on your computer:
    1. Start Menu and open All Programs.
    2. Look for and open the HP folder, here or within a folder named after the printer you will open Add a Device.
    3. Walk through steps on screen and when the printer is added successfully you should have the printer icon you are looking for.
    Thanks,
    JERENDS
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • How do I get Adobe reader to be recognized on my Devices and Printers?

    How do I get Adobe reader to be recognized on my Devices and Printers?

    CutePDFWriter is a third-party application, which Adobe doesn't provide support for. But, I did find the following on their website:
    "Requires PS2PDF converter such as Ghostscript (recommended).
    You can get the free GPL Ghostscript 8.15."
    Here's a link to their website:
    CutePDF :: Product :: CutePDF Writer
    So, it looks like it creates a PostScript file for you, but then you need additional software to convert the PostScript file to PDF.
    Best,
    Sara

  • Info on How to install adobe pdf as a printer into my device -printer file in windows 7

    Need information on how to install adobe pdf as a printer in my device-printer file in windows 7. I currently have adobe 8 pro & acrobat distiller on my pc.

    Acrobat appears to be running just fine- I am running windows 7 Ultimate 64 bit. I don't know why it just didn't automatically install- I just replaced an older HD that was going bad. Copied my entire system using windows mirrow image. Adobe pdf converter was in my device and printer file before and now its's not. I did have to reinstall several programs, such as Adobe Acrobat, etc.

  • I am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........

    i am trying to sync iphone 5 to itunes but it says "iTunes could not connect to the iphone as an error occured while reading from the device " and the iphone is not seen on itunes........

    First thing to try is to reset your device. Press and hold the Home and Sleep buttons simultaneously ignoring the red slider should one appear until the Apple logo appears. Let go of the buttons and let the device restart. And then reboot your computer.
    See if that fixes your problem.

Maybe you are looking for