How do I remove Final Cut Pro X Addins/Effects?

I have some addins I want to remove from Final Cut Pro X.  I no longer need/want them listed.  I only want to see the default Effects.  I dont need to know how to remove them from my projects, I want them off the computer all together.

dastoelk wrote:
Karsten! You beat me to the punch. I thought the SAME thing soon after I logged off.
although fxFactory was gracious enough to invite me to some free 'tests', I must admit, that this 'automatic reinstall after deletion' is a bit .... annoying? un-Mac-like? … I'm not customed to such behavior, at last.
the first time, I installed everything, then my effects-tab in FCPX was a bit crowded, used the steps you mentioned too - and, oh wonder, on next launch, everything back again!
... 'til I understood the 'plug-in installer & management'-function of fxFactory! <slapping own forehead>
on the other hand, every 3rd post here
http://www.fcp.co/forum/9-free-fcpx-plugins-and-templates
asks for 'how do you install plugins?"
so, it needs a better/convenient routine ....

Similar Messages

  • HT5127 how do you remove final cut pro x

    i had installd a final cur pro x and i  install a final pro cut  but it does not come up so how can i get red of the final pro cut x and find the other one thanks

    Proper installation is to install Final Cut Studio first.  Then install Final Cut Pro X.
    The Final Cut Pro X installation will place the Final Cut Studio apps into a folder called "Final Cut Studio".  Since you can't have two "Final Cut Pro" apps in the same folder.  Then you'd launch FCP X from the Applications folder, and lanuch FCP 7 from the Applications > Final Cut Studio folder.
    Both can live on the same system at the same time quite easily.
    Here is the Apple support document that explains it all in detail for various types of installation.
    http://support.apple.com/kb/HT4722

  • HT4589 how can I reinstall Final Cut Pro 10.0.6, this action may correct my issues

    how can I reinstall Final Cut Pro 10.0.6, this action may correct my issues

    Thanks, I have found this on the "APPLE" support site; Final Cut Pro X: How to remove and reinstall Final Cut Pro X on; http://support.apple.com/kb/HT5149, which after reading through increased my trepidation ! Your directions are frightingly concise but Just what I needed..

  • How to export from Final Cut Pro after downloading Maverick

    Final Cut Pro no longer exports after installing Maverick.  I get this: The operation couldn’t be completed. (com.apple.Compressor.CompressorKit.ErrorDomain error -1.)  - have paid for Compressor and instaled it - but it makes no difference.

    But how do I update Final Cut Pro 10.0.3?  Apple says all my updates for everything are fine.  It worked well before I installed Maverick, and now I can't get any of my short films out of it!  They won't copy over to IMovie so I have to start again and basically scrap Final Cut Pro - which seems a bit unfair just for updating to Maverick.  Makes the free download a bit pricey in the long term.

  • How do i get final cut pro x to recognize my time capsule in event library

    how do i get final cut pro x to recognize my time capsule in event library?

    Yeah I'm getting the same issue.  I purchased a new Mac Mini yesterday purely to use the new FCPX, and now on day 1 I'm already running into problems... please don't make me switch to Premiere.
    Set up the computer with external yesterday, never set anything to Time Machine.  Here's a screenshot of the drive, formatted on Mac OS Extended (Journaled):
    And here's a screenshot of FCPX not recognizing the drive:
    Apple please respond to this post, would really appreciate some help here troubleshooting. 

  • How do I stop Final Cut Pro 10.1 from  introducing artifacts?

    How do I stop Final Cut Pro 10.1 from introducing artifacts?
    Can someone please tell me what do do differently so that my edited video does not develop artifacts that were not in the original camera file.  My Sony HDR CX900 produces crazy detailed XAVC S video that FCPX seems to import with no problem but FCPX is introducing artifacts: some on import and more on share. The artifact in the examples below appears above and below the horizontal rope line on this model boat. Please look closely. It doesn't look to bad here, but it dances on my screen. Also, the video generally degrades much more than I would have hoped. How can I get more professional results?  Sorry for the long post, but more information now might save time and questions.
    Below is a portion of a frame opened in quicktime directly from camera's card.
    Below is the associated Inspector for above frame
    Here is the same after it is imported into FCPX. Optimized and Proxy Media were created, but FCPX seems to select what to play so I can't tell you which one is shown here.
    Here is the associated Inspector capture from FCPX.
    Here is the same frame once again after it is Shared as ProRes 422. Note the horizontal lines above and below the rope lines on this model yacht.
    Here is Inspector for the above file.
    Here is the same once again after it is Shared as H.264 Better Quality.
    I tried converting to Proress with 5Dto RGB and Brorsoft Video Converter. They both went though the process, but introduced similar artifacts.
    How can I get more professional results?
    And here is the associated Inspector for the above video.
    I tried converting to Proress with 5Dto RGB and Brorsoft Video Converter. They both went though the process, but introduced similar artifacts.
    How can I get more professional results?

    Russ H.
    When I right click on the clip in the browser and select Transcode Media, the dialog box opens, Optimize Media is checked, but OK is greyed out. Transcode is not an option. I think this points to the fact that FCPX is doesn't need to transcode XAVC-S or FCPX can't transcode XAVC-S. This is a new Sony codec produced by the new HDR CX900. The codec is HD at 50Mbps.
    Tom Wolsky,
    I selected Optimized Media in the viewer and both the timeline and exports (422 and H.264) look great.
    The 24 second long exported video jumps a couple of times as if skipping a frame, as it plays. Could this be related to 29.97 instead of 30fps?
    Thank you so much for getting the image right. Now if I can just eliminate those couple of small jumps.

  • I removed Final Cut Pro X , followed the instructions, However my computer still thinks that is installed and doesn't allow me to re install

    I removed Final Cut Pro X , followed the instructions, However my computer still thinks that is installed and doesn't allow me to re install

    Does it say it is already installed, or not compatible?  If you have more than one boot volume attached, is it possible a copy is also on another drive/
    Ernie

  • How Can I transfer Final Cut Pro X to another computer

    How can I transfer Final Cut Pro X to another computer without connecting the two

    As Kappy said, download it from the App Store - this will give you a brand new copy. However unlikely, it's just possible you might be copying a corrupt version from the original computer.
    In the App Store, make certain you use the same Apple ID that the App was purchased with.
    Andy

  • How do you import final cut pro projects into imovie? (like you create a pr

    How do you import final cut pro projects into imovie?
    (like you create a project in final cut but i want to save it, and import it into imovie..

    Hi -
    Mr. Ross is right, there is no direct way to export your project with all it's elements into iMovie.
    If, on the other hand, you have a completed sequence in FCP that you want to export as a finished element, then import into iMovie for you to re-edit or apply titles, music, etc. you would:
    In FCP:
    Click on the Sequence Icon you want to export in your browser.
    Go to the menu File > Export > Quicktime Movie. Give your movie a name a navigate to where you want it stored. Make sure you choose Settings: Current Settings and have the Make Movie Self Contained checked. Click Save.
    Close FCP and open iMovie.
    In iMovie:
    Go to the menu File > Import > Movies and navigate to the movie you just exported from FCP. Choose if you want your movie imported in it's original size, etc.
    Click Import. Your movie will be imported into iMovie.
    Note that using this method only gives you only the elements that made up your FCP sequence, so this may not give you the flexibility you need.
    Hope this helps.
    MtD

  • HT5127 do I need to remove final cut pro 7 before installing final cut pro x

    do I need to remove final cut pro 7 before installing final cut pro x

    No. When you install FCP, it will move the FCS applications into a folder called Final Cut Studio.

  • How can i buy final cut pro with my account p.s its no u.s id?

    how can i buy final cut pro with my account p.s its no u.s id?

    You are wanting to change your account to US to buy FCPX? Do you have a credit card at least?

  • How to upgrade my Final Cut Pro 6 to X

    How to upgrade my Final Cut Pro 6 to X?

    There is no upgrade to FCPX, you have to buy it for $299.99. Yes, Russ is right, FCPX is very different than previous versions, I realized that I would have to start from scratch with it. Look up free tutorials online, there are a few good ones. If you try and just jump in, you'll get very frustrated very fast. Take the time to learn it before you try any important projects. Read my post:
    https://discussions.apple.com/message/23411640#23411640

  • TS1846 I cannot totally remove final cut pro 7 and now I cannot reinstall it. Does anyone know how to completely remove FCP7?

    I was having problem with the share feature in FCP7. The Apple tech sent me some trouble shooting articles. Tried to follow them but I did not find the files for FCP7 in the receipt folder. Tried to reinstall the program but it does not start with a clean slate. The first time I installed FCP7 it asked for the serial number. This time it does not ask for anything and just starts to load but ends up spinning endlessly. There must be a way to remove everything and start out fresh again. What steps am I missing, which were not covered in the article?

    download and run this to remove Final Cut:
    FCS Remover

  • How do I uninstall Final Cut Pro 5 Suite?

    I've never actually tried to uninstall this suite, so I may be overlooking something obvious. I tried opening the install package and looking for an option there, but no luck - and the document on Apple's site that should instruct me on how to do this seems to be missing.
    Does anyone have any tips?

    one of the support articles includes these notes:
    Another approach you might consider is reinstalling Final Cut Pro. To do this effectively, you need to remove the application and its receipts, then install Final Cut Pro and use Software Update to install additional updates. You don't have to remove everything that was installed with Final Cut Pro. Follow the steps below to completely reinstall a fresh copy of Final Cut Pro. Note: Make sure that you have your installation discs and serial number handy before starting this.
    Open the Applications folder.
    Drag the Final Cut Pro application to the Trash.
    Go to /Library/Receipts.
    In the Receipts folder, select the "FinalCutPro.pkg" file.
    Choose View > as List to view the contents in a list.
    Click the Date Modified column header so you can easily see all of the receipts that were installed at the same time as Final Cut Pro.
    Drag the FinalCutPro.pkg receipt to the Trash, as well as any other items that have the same modification date within 3 minutes of the FinalCutPro.pkg's modification date.
    Click the Name column header to sort the list alphabetically.
    Drag any other receipts whose names begin with "Final Cut Pro" to the Trash.
    Insert your Final Cut Pro installation disc and install Final Cut Pro.
    When finished, use Software Update (under the Apple menu) to update your software to the latest version.
    For further information on settings or installation, please refer to the Final Cut Pro documentation available on your installation discs.
    Hope that helps
    N

  • How do I take Final Cut Pro off one computer and move it to a new one?

    I'm using Final Cut Pro Academic, and I can only run the program on one computer. If I'm getting a new computer, how do I move the program from my old computer to my new computer? Is there a way to "deauthorize" my old computer? If there is, I can't seem to find it.
    Any help you could give would be greatly appreciated.
    Thanks,
    Doug

    Excellent! Do I need to do anything to ensure the the program installs on the new computer? Do I need to make sure the computer is connected to the Internet when I uninstall the program from the old computer?

Maybe you are looking for