How do I remove "first run" window after having opened and used FF many times?

When I open FF, 2 tabs are presented, the first is the "first run" window the other is my homepage. I would like to delete or remove the first run page

See these articles for some suggestions:
* [[Firefox has just updated tab shows each time you start Firefox]]
* [[How to set the home page]] - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

Similar Messages

Every time i try and open safari i get an error message.. how do i reinstall safari so that i can open and use it?

every time i try and open safari i get an error message.. how do i reinstall safari so that i can open and use it?

Create a new profile as a test to check if your current profile is causing the problems.
See "Basic Troubleshooting: Make a new profile":
*https://support.mozilla.com/kb/Basic+Troubleshooting#w_8-make-a-new-profile
If that new profile works then you can transfer some files from the old profile to that new profile, but be careful not to copy corrupted files.
See:
*http://kb.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox

How do I know if I have bootcamp on my computer? And if I swtich to run windows, can i download and use Authorware?

I am not 100% sure if we have bootcamp on our computers. How can I be sure? And if I do not have it, can i get it and for how much?
Also if I use bootcamp to switch from the mac os to a windows os, can i download a plug in that is not compatable with Mac and use it?
We purchased our iMacs in 11-2010. We LOVE them. We will never switch back. However, the attorney that I work for has to do online training with a Sheriffs dept to maintain some of his credintals. We check with the help desk and they just do not support any apple products. Their online training requires two plug ins, Adobe flash, which we have, and Authorware, which will not work on our macs. And like I said the website's help desk just doesn't support any apple use.
Any help/advice would be greatly appreciated!

Boot Camp Assistant is included on the OSx installation disk. There is no charge. Boot Camp Assistant is used to create a Windows partition on which you install the Windows operating system.
You need to buy a retail version of Windows. Once Windows is installed on the Boot Camp partition you can boot your computer into OSx or into Windows.
You can install and use Windows software when you are booted into Windows.
There is a Boot Camp Installation Guide on your installation disk.

When will the File menuitem on OS X be released after having opened and cancelled out of the Import window with Fx 4 beta 12?

This [http://img638.imageshack.us/img638/4186/screenshot20110226at124.png (Image)File menuitem not released after closing Import window.]
It has been there since early Firefox 4 betas. With 3.6 and 3.5 of Firefox it happened with the Tools and Bookmarks menuitem, also on Leopard and Snow Leopard the same way like the screenshot above. It happens more often that I would like. I'm not in the File menu at all and yet it's highlighted. I've closed the Firefox window and reopened a new window but the File menu remains active until I actively press it again or any other menu in the Firefox 4 menubar.
You can try it by choosing the File menu -> Import and then simply close the Import window and return to Firefox 4 for a browsing session. Does the File menuitem remain active? Happens each time now that I figured out the correct trigger that I mentioned with the Import window.

Hi Rick & Todd
thanks for testing & responding
@ Rick - ProRes cannot be fixed with color management. At all. It is a problem that adobe has setting a correct quicktime gamma flag.
I am color-tight if re-importing encoded file back in to AE or any other adobe app. When exporting to PR or Quicktime in General, something is going terribly wrong.
@ Todd - This whole thing did not leave me alone and I have figured out what the problem is (aside from the Quicktime issue)
If AE's Audio Hardware Preferences is set to anything else than built-in audio this problem occurs. Setting it to Built-in Audio all the issues are remedied.
@ Todd - I have Crash Reporter Enabled.. but AE never crashes ;-)
@ Todd - I spent the better half of this year beta testing PT 11 for AVID along with another dedicated set of folks... The reason we test so long prior to release is to get rid of all the small issues that should never surface in a commercial software. Of Course you cannot get all of them but such as testing the audio hardware capabilites of AE prior to a major release should have been cought by the beta crew.. If any.
The quicktime issues are long standing - how about opening contact with Apple ( you are a developer and entitled to Apple Support) and tell them about the problem. And have them help you.
I mean, you offer Speedgrade which is a fantastic app, PPRO, AE & PS (All great) but what good is greatness if neihter is able to deliver. The quicktime file is being displayed with a .8955 gamma offset (What one would have to offset the quicktime file by) when viewed in any other app than adobe's That is a lot.

Laptop wont read pdf files and I do have adobe and used it many times before. Using firefox as always and cannot locate download after I have asked it to be saved to my computer

help!

Have you tried deleting all previous versions of Adobe first?
If not, do a search for it on your mac and then uninstall. Then download the most recent Adobe and search for that, then launch it from the search window.
I'm no expert, but I had the same problem and this worked for me. It's on the Adobe help page, follow the link from where you're downloading it, there's a few good suggestions there.

My iPhone shuts down with certain apps and says dead Batt. with plenty left. Now it wont turn on after starting up and turning off many times

I got my Dads old iPhone 3GS for Christmas and reset it to its factory settings. It had this problem with my Dad to, thats why he got a new phone. It was claiming that the battery was dead when I opened certain apps eventhough it had plenty of battery, It made me charge it and then said it was plenty charged. Why? That happened multiple times. That's what happened to my Dad as well. This however, is me only. O.K. so, the other day, it did it's battery dead shutdown thing, so I plugged it in, but it kept starting up, then shutting down again, starting up, and shutting down again. Now I've left it on the charger for about a days, it's not on the charger now, and it won't turn on. Help!!!!!!

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.
If the issue persists, take the device to Apple for evaluation and possible replacement.

I WORK WITH 20+ TABS OPEN, SOMETIMES IF A WINDOW IS ALSO OPEN AND I DON'T CLOSE IT FIRST, MY TABS DON'T REOPEN WHEN I RESTART FIREFOX-HOW CAN I FIND AND REOPEN?

I understand how to set the restore tabs function and have done so. Usually my tabs reopen when I restart, but every once in a while if I have other windows (not tabs) open, and I forget to close them all first, before I close my main window, then when I reopen, my tabs are gone. I have gone to History and I can see the Restore Previous Session and Restore Closed Tabs commands, but they are not highlighted and they don't work. Please advise

Try using the Firefox button > Exit when you go to close Firefox, that should save all your open windows / tabs.

I am running Windows Vista 64 bit and i get a runtime error R6034. How can i fix this and get itunes to work?

I am running Windows Vista 64 bit and i get a runtime error R6034 when i was updating itunes. How can i update itunes with out getting this error?

* Make sure that you do not use [[Clear Recent History]] to clear the "Browsing History"
App tabs and Tab Groups (Panorama) are stored as part of the session data in the file sessionstore.js in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder]
* http://kb.mozillazine.org/Session_Restore

How do I remove white jagged edges after making image transparent?

How do I remove white jagged edges after making image transparent? Is there a feature to help out with this?

It's a file format limitation. GIF supports 1 bit of transparency. That is 2^1 (which equals 2 total) levels of transparency. This equates to either NO transparency at all, or specifying 1 single color of the 256 total possible values to being fully transparent.
This will leave a very ugly fringe around the edge no matter what; it will only not be visible in color that match or are close to the fringe color; and then, that's a perception issue.
Try creating an alpha channel and saving the image as a PNG. That supports 8 bits of transparency, which equals 2^8 or 256 total different levels of transparency. This will let your image have very smooth edges with no jagged transitions.

I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?

I am running Windows 7 64Bit system and everything was working normal. However, I am now getting an error message stating objc.dll is missing. I've re-installed Itunes but to no avail. How can I get this error message corrected?

See this User Tip by turingtest2
https://discussions.apple.com/docs/DOC-6562

How do i remove the finder window from my start up desktop window.

How do i remove the finder window from my start up desktop.

Are you saying that when you log in, there are finder windows open before you even do anything? If so, that's because last time you logged out you left them open. Next time close all your finder windows before you log out and you should be good.

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using.

My MacBook Pro 13" (2012) is running Windows 7 on Bootcamp and there is an issue with the headset I'm using. I use a cheap Logitech Stereo Headset H130, but since there is only on audio plugin on the computer, I purchased a 3.5 mm 4-pin smartphone audio adapter thingy. That allowed me to put both my the sound coming to my headset & the microphone on my headset onto one wire. Everything worked wonderfully when running the Mac OS since they probably have support for that kind of stuff. The problem is though that once I try to use the same method in Windows 7, the OS doesn't recognize my headset microphone at all, but, instead when recording my voice decides to use the built-in mac microphone. Using this adapter still allows me to hear from my headset, but not use the microphone and that becomes a problem. It might be so that Windows 7 doesn't have support\drivers for that... How should I continue from here on out? Any advice?

From what I have read from others on here you may be out of luck. You would need the appropriate Windows drivers for the Cirrus chip in the Mac and no one has been able to successfully locate them. Apple wouldn't support this since Windows is an optional install.
Sorry to bring the bad news.

How can I remove ASCII text from a field when I use it in a query

How can I remove ASCII text from a field when I use it in a query?
I am running a select statement on a table that appears to have ASCII text in some of the fields. If I use these fields in the where statement like the code below nothing returns:
SELECT FIELD1 FROM TABLE1 WHERE FIELD1 IS NULL
But the field looks empty if I do a straight select without the where clause. Additionally, one of the fields has text but appears to be padded out with ASCII text, which I need to strip out before I can use this field in a where or join statement. I have tried using a trim, ltrim, rtrim, to_char, nvl, decode and nothing works. When I use excel to run the same query it looks as if these ASCII fields are boxes.
I have asked our DBA team to see what they can do to prevent these from going into the table, but in the mean time I still need to run this report.
Do you have any suggestions?

Can you provide an example? I've been trying (for
example) "select translate(' test one', ascii(' '),
'X') from dual" with no luck.
Thank you.To replace space, you should query like this:
select translate(' test one', chr(32), 'X') from dual instead of select translate(' test one', ascii(' '), 'X') from dual Thanks,
Dharmesh Patel

How do I remove the white space from the bottom and side of my document?

How do I remove the white space from the bottom and side of my document? (I'm not talking about printing, just viewing it on the screen.) There are about 6 inches of white space at the bottom and at the right hand side. I don't like this. On a blank new spreadsheet it's triple that amount of white space.

The infinite canvas convention doesn't make a lot of sense for Numbers. When I'm viewing a spreadsheet and mistakenly scroll into white, empty space I think, "this is ridiculous - all of my content is fits on one screen. there's nothing over there."
A (relatively) infinite canvas is logical for Microsft Excel because it's one big table. There are 256(?) columns by default and hundreds of rows on a sheet - there are cells outside what a user is looking at to see. However, when viewing a Numbers spreadsheet with a single 10 column 10 row table that fits on the screen, there's nothing else on it to scroll to.
Numbers should distinguish between viewing a spreadsheet and editing one. When I'm just viewing, when there's no content outside the window it shouldn't scroll there. This window behavior is beyond annoying for Numbers on my iPad and iPhone.
(Adding user-defined canvas size setting to my view mode / edit mode thinking would probably be the most complete solution to this now that I think about it.)
Until now the way scrolling worked in Numbers has defied logic. Actually it still does lol. That said, thank you Yellowbox for providing a clear explanation. Much appreciated.

After I open and read an email how do I get back to email. I am closing the open email then having to go back to the home screen and then reopen the mail app. There has to be a better way.

After I open and read an email using my mail app, how do I get back to the email app to open an read others. I am closing the email open, going back to the home screen and reopening the mail app every time. There's got to be a better way to do this.

If you are using the iPad in portrait mode, swipe from left to right in order to bring up the preview window of your emails again.

How do I remove "first run" window after having opened and used FF many times?

Similar Messages

Maybe you are looking for