How do i remove " get Plus R for adobe?

How do I remove " get Plus R for Adobe?

I think I am having a conflict with Abobe so I am trying to remove all Adobe programs. In the add/remove the "get Plus R for Adobe is still in there. When I try to remove it, nothing happens. About a week ago I tried to download CS4 and it didn't all download and I'm thinking this was part of it.

Similar Messages

How do i remove japanese font support for adobe reader x.

i am trying to clean my system up and give me more space on my hard drive this bit reporte as 61meg in size not a lot but all space helps. anyway i get an error telling me "error opening installation log file. verify that the specified log file exists and is writable"

Hello normanjones4
Not sure this is Reader issue. Please refer MS kb# http://support.microsoft.com/kb/2564571
Hope that helps.
~Deepak

How to get the download for Adobe Digital Editions to work on PC?

How to I get the download for Adobe Digital Editions to work on my PC?
3-4 tries today on Adobe website and no results.

If you are on Vista, see the announcement at the top of the forum,
which points to http://helpx.adobe.com/digital-editions/kb/installing-digital-editions -20-windows.html
Try an older version (1.7.2) of ADE, especially if you are on XP.
Version 1.7.2, it is a little difficult to find, available on Adobe site for Windows and for Mac.
http://helpx.adobe.com/digital-editions/kb/cant-install-digital-editio ns.html
also for PC at http://www.tucows.com/preview/853736/Adobe-Digital-Edition-For-EBooks

Can any body tell me how to get a call for adobe interview for a flex developer post for 2.6 years??

can any body tell me how to get a call for adobe interview for a flex developer post for 2.6 years??

hi,
there's some microsoft support to this issue. check here http://support.microsoft.com/kb/2008385
regards.
From out of Nowhere

How much do you get paid annually for this job User Interface Designer?

how much do you get paid annually for this job User Interface Designer?

Apple probably will not discuss salaries even for specific jobs other than with applicants. If you wish to discuss salaries, you'll most likely have to apply for a specific position and then get beyond the initial screening.
This issue has nothing to do with Apple Remote Desktop, the topic of this forum, by the way.
Regards.

HT201070 how can I stop getting this update for "Ditigal camera RAW"?

how can I stop getting the upgrade for ditigal camera RAW on my iMac?

Morgan R wrote:
See this thread about disable specific software update in Mountain Lion.
There is some confusion about how to apply the method in the replies to that topic. A somewhat easier to understand explanation is at http://www.macobserver.com/tmo/article/hide-a-software-update-in-os-x-mountain-l ion, among other places on the web.
Note that you may need to click on the "more" item to see individual system software updates.
That said, the others are right: the RAW format updates are tiny & it is hardly worth the effort to hide them or to worry about the disk space they use.

HT204370 how do con i get a refund for a movie that i did not whant

how do con i get a refund for a movie that i did not whant

If you mean that you bought it by mistake then try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via the Store > View My Account (Store > View My Apple ID on iTunes 11) drop-down menu option and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that film, click the arrow to the left of it, click the 'Report a Problem' button :
and then the 'Report a Problem' link on its line :
and select 'inadvertently purchased' as the problem and fill in the details (iTunes support should reply within, I think, about 24 hours).
If the 'report a problem' link doesn't work (it's been taking people to this site on a browser instead of showing a form in iTunes) then you can try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

How can I find my serial number for Adobe Acrobat 11. I got a new iMac and I don't want to use the new version at £18.00 per month. I don't need it. Thank you

I used to use CS5 and I want to use the Acrobat version on my new iMac.
How can I find my serial number for Adobe Acrobat 11. I don't want to use the new version at £18.00 per month. I don't need it. Thank you

Hi Anthony Aduhene
Please refer : Find your serial number quickly

How do I remove PDF messages stored on Adobe Reader XI?

How do I remove PDF files stored on Adobe Reader XI?

On a Windows system use the Windows Explorer to delete the files.

How do I accept the lincense agreement for Adobe Reader XI since accept bottom is not in the page.

How do I accept the license terms for Adobe Reader XI when it asked to press the accept buttom at the bottom of the page but there is no such buttom.

See if anything in here helps: http://helpx.adobe.com/acrobat/kb/cant-click-accept-acrobat-reader.html

Where can I get the cd for adobe photoshop 6.0 classroom in a book

where can I get the cd for adobe photoshop 6.0 classroom in a book

Adobe Photoshop 6.0 Classroom in a Book: Sandee Adobe Creative Team: 9780201710168: Amazon.com: Books

How do I create a desktop Icon for Adobe create pdf?

How do I create a desktop icon for Adobe create pdf?

Hi, ken.
You can access ExportPDF from your computer more quickly in three ways:
You can download and install the CreatePDF Desktop Application. More info is here. With this application, you can drag PDF files onto a desktop icon and have those converted to Office files. (If you subscribe to the CreatePDF service, this application will also allow you to create PDF files.)
You can download and install the newest Adobe Reader and access the service using Reader's Tools Pane on right. Then, any time you have PDF open in Reader, you can (with a couple of clicks) convert that PDF to an Office file.
You can drag the webpage icon from your browser to your desktop. This will create a shortcut to the ExportPDF website on your desktop. Here are some instructions for doing that using Internet Explorer or Firefox.
Let us know if you have additional questions or issues.
Dave

Photosmart 8230. How do you Remove the print heads for cleaning?

Hi guys, I have a Photosmart 8230. After a few lines of printing the black ink fades to almost nothing, all the colours are perfect. There are no error messages. I have done the self cleaning and alignment procedures and wasted a lot of expensive ink. The test page comes out with streaks on the black only. It has been suggested that I take the print head out and immerse it in hot water as a last resort. The question is, how do I remove the printhead? or should I use it as a sea anchor!!
This question was solved.
View Solution.

I just did this to a HP Photosmart 8250 which is in the 8000 series range. I assume they are similar. I was an appliance repair man and have done a lot of other tings in my life, so I decided to take a shot at repairing my 8250 rather than junk it. For 3 Years it was great, only one paper jam, and fast great photos, so I didn't want to give up on it. HP will not repair printers for us, I think because it is too labor intensive, and they can sell a new one for what it would cost.
I actually fixed my HP Photostat 8250. Its working but the color printing is not as good as it was, yet, but I am hoping that will improve as all of the colored inks work their way through the system.
Taking one of these apart and putting it back together is like a Chinese puzzle, so its appropriate that they are made in China. Most of the parts inside can be easily damaged if you are not careful. The covers have very clever ideas to their design and how they snap in place. Take your time with the covers and use small tools.
Getting it back in working condition is another matter. There is a 6 circuit pump and more than a few feet of tubing. I had the side covers off while I tested it and this pump seems to work in both directions. This pump is inside the left side cover. There is another motor with a timing wheel of some kind that stops and starts in both directions at the same time the printhead carriage is whipping back and forth printing. There are other motors also. These things are ingenious. It is surprising that I bought it for less than $100 on sale. It looks like a $1000 piece of equipment inside.
It would probably be a good idea to not remove the left side cover, but if you do, be very careful around the clear timing wheel. it looks delicate. Below is from an email I sent to a friend and I am revising it to make sense. Remember this is something that really requires training to do this, but I see people today that have the guts to tackle all sorts of projects, so for what its worth, and you asked.
Under the right side cover is a motherboard, with a bunch of cables plugged into it, small, larger and even ribbon cables. I found it necessary to remove the motherboard. I had a bit of experience working on Canon printers and I would also suggest you take digital pictures as you go so you can view them on your PC. I am also going through this because I don't like being told we can get anything repaired correctly today, its ridiculous that these printers have become just more throwaways. If you want to do this, as a guide, I must have spent 8 to 10 hours doing this, but now I could do it again in 2, that is the learning process.
Once you get the top off the printer, you will see the printhead carriage. The carriage will be to the right side. The printhead is retained by two screws at the front, (take pictures) a spring clip at the rear and two screws that hold a plastic cover over the six ink hoses that plug into the printhead, its a manifold strip affair. You have to unplug the manifold to remove the printhead, but now I am not 100% sure its necessary to remove the printhead? The ink gunk you will see after you move the printhead to the left is no doubt most of the problem.
Probably after the hot water treatment as described below, the built in printhead cleaner will be able to resume cleaning the printhead, after the hot water cleans the gunk from IT.
I removed the printhead like I say below, but first do this. Under the printhead there is a little carriage with a patch of foam rubber that cleans the print head nozzles.This little device works back and forth while cleaning, but while it is parked, with the printer off, it is forward and you won't be able to move the printhead. Use a flashlight to be sure and you will see how to push the cleaner carriage to the rear and then move the printhead carriage to the left. THEN, you will see the gunky ink mess that has accumulated. This gunky mess I think is the main problem. There are also some felt pads below the cleaning device to absorb some of the ink gunk. I don't know how the HP techs do this, but I used the hot water method below, I had nothing to lose. I would move the printhead first and then you can decide about removing it. I would make sure not to get any of the electronics wet and why I removed the motherboard and why I say take photos. Its hard enough to remember where the different screws alone go, when you are doing this. It can be done, mine is working, even if not perfectly, YET. You need to be very careful with your fingers, because it is hard to find space to hold onto the printer and whay it might be a good idea to not remove the left side.
They are so complicated, its just a matter of time before they get gunked up with ink and the printhead begins floating in the mess. I had nothing to lose so I removed the printhead, carefully, taped up all the hoses so they didn't dry out, Then I removed the motherboard to keep it from getting wet, THEN I held the messy ink end under the HOT water in the laundry tub and flushed out enough ink to dye a bathtub full of water. The hot water worked well. Then I let it all dry out. There are some delicate procedures to all of this and it takes time. I think that is why its very hard to find anyone to fix them. Its labor intensive and probably why HP won't repair them. The print section is the problem, and why I won't buy an All in One printer, Fax, and Scanner. I do buy the extended warranty's now. If you tackle this, take your time, take photos, and good luck. By the way, the 8250 uses O2 print cartridges, is that the type of printer you have, but a lot of this applies to other printers and other brands, and I bet I am not the only one to do this. Before I started this the diagonstics showed no problems, so I assumed it was the the ink aspect of the printer, and not an electronic of mechanical problem. I hope this helps.
----- Original Message -----

How do i remove cinema-plus software

When loading Skype onto my mac it installed, cinema-plus 1.1 how can l remove it from my iMac

What site did you use to download Skype? It is best to only use the app store or, if you trust the company, from their website directly. Other sites include "additions" such as adware, malware, etc. It appears that is what you got according to this:
http://malwaretips.com/blogs/ads-by-enterprise-1-1-removal/
Those tips are for Windows; hopefully this tool will help; it is from a long time contributor here:
http://www.adwaremedic.com/index.php

How to hide/remove the 'Delete' button for a particular role

We have a role that can only Create and Edit the Accounts, Contacts, Opportunities, & Leads. So I modified the Default and Owner Access Profiles for that role and changed the Access Level to 'Read/Edit' for each of the above mentioned Record Types.
When the user is logged with this role they can see the 'Delete' button on all the Record Types. When they click on the 'Delete' button they get the 'Access Denied' message. Thats fine, but how do you hide/remove the 'Delete' button for this role so they don't try to click it.

At this time it is not possible to hide/remove the "Delete" button. This functionality is on the roadmap.

How do i remove " get Plus R for adobe?

Similar Messages

Maybe you are looking for