How do I remove locations and/or pins from maps on iphone 5

How can I remove locations and/or pins from MAPS?

A purple pin is a dropped pin. You access that from the "back" of the map, but touching the lower right corner of the map. It is a pin that is dropped in the center of the map you happen to be looking at at the time. If there is no description of the pin, touch the pin and it should show a label, and on the right side of the label there is a blue arrowhead. Touch that and it will provide an address/description of the pin's location and there should be other options, such as directions to here, from here, etc., and then one to remove the pin. Touch that and it should disappear.

Similar Messages

  • HT201210 How do I remove itune and charger icon from my iphone screen and allow access

    How can I remove itune and charger icon from my iphone 4s screen and allow access. While downloading the lastest version of iune my iphone was being charged. The phone do not allow access anymore.

    Once the Device is asking to be Restored with iTunes... it is too late to save anything... and you must continue with the Recovery...
    Miss Bspace wrote:
    How can I remove itune and charger icon from my iphone 4s screen and allow access. 
    Make sure you have the Current Version of iTunes Installed on your computer
    iTunes free download from www.itunes.com/download
    Then see Here  >  http://support.apple.com/kb/HT1808
    You may need to try this More than Once...  Be sure to Follow ALL the Steps...
    Take your time... Pay particular attention to Steps 3 and 4.
    After you have Recovered your Device...
    Re-Sync your Content or Restore from the most recent Backup...
    Restore from Backup  >  http://support.apple.com/kb/ht1766

  • How can i remove the end pice/pin from my headphones out of my computer?

    how can i remove the end pice/pin of my headphones out of my computer?

    IF you cannot pull it out with your finger tips, you need to take the machine in for service to an Apple Store or AASP. Doing this type of work yourself could seriously damage the computer so it's best left to professionals.

  • How can I remove red and green lines from a footage?

    I cannot remove red and green lines without removing the title graphics that I have in my footage. How can I solve the problem and keep the graphic there?

    @Ann Benns
    I will try to do that. Thank you!
    @Bill Hunt
    Well, the raw footage is an avi filmed with a handycam. This error occurred
    the next day after I finished the editing in Adobe Premiere cs5. It might
    be something wrong with the title graphics that I use, but still if there's
    a solution I would like to find it out as this error occurred before.
    Cristina

  • How do I remove spaces and special characters from the file name during rendering?

    I understand that I can set LR_renamingTokensOn to true, but I would like to replace all spaces in the file name with an underscore and remove characters not in the range A-Z and 0-9. What's the easiest way to achieve this?

    local photo = catalog:getTargetPhoto()
    local sesn = LrExportSession {
        photosToExport = { photo },
        exportSettings = {
            -- ... (determine from export preset) - whatev you want, just be sure you set export directory: LR_export_destinationPathPrefix
            LR_tokens = "{{custom_token}}",
            LR_tokenCustomString = LrPathUtils.removeExtension( photo:getFormattedMetadata( 'fileName' ) ):gsub( "[ %c]", "" ) -- remove spaces and control characters
    sesn:doExportOnNewTask()

  • How to upload pictures, contacts, and other things from my old iPhone

    How to upload all my pictures, contacts, and other things from my old iPhone

    If you want everything copied over then you can copy your iTunes downloads over to your computer's iTunes library by connecting it and doing File > Devices > Transfer Purchases and you can then backup up your old phone via File > Devices > Back Up - you can then restore that backup onto your new phone (or iPad as this is the Using iPad forum).
    Backups and restores : http://support.apple.com/kb/HT4079
    Transfer content to a new device : http://support.apple.com/kb/HT2109 (you can also backup/restore via iCloud, but not all iTunes content is redownloadble, so you might not get all items copied over).

  • How do I transfer calendar and contact info from blackberry to iPhone 5

    I have a blackberry 9300 and just got an iPhone 5. Is there anyway of transferring all my contacts and calendar info over to the iPhone ?
    Thanks

    You can try apps like dropbox.
    Or you can import those pics from your Android to your computer, then use iTunes to sync those photos to your iphone.
    http://support.apple.com/kb/HT4236

  • How do I remove Zynga and Aol toolbars from Firefox browser?

    each time I open Firefox, the Zynga and ALot tool bars open and I have to go to the view menu and un-check them. How do I permanency remove them?

    http://kb.mozillazine.org/Uninstalling_toolbars

  • How do I remove "Spigot", and "Slick Saver" from my desktop Mac.

    I am running 10.10.3, Yosemite, 2.5 GigHz Intel icore 5. These 2 PUP's keep appearing on Safari, Chrome, and Fire Fox. Search on line deals only with PC's.  I have been offered PUP removal software on line but after a bad experience with Mac cleaner I don't want to do that.

    Please review the options below to determine which method is best to remove the Adware installed on your computer.
    The Easy, safe, effective method:
    http://www.adwaremedic.com/index.php
    If you are comfortable doing manual file removals, use the Apple support document below.
    http://support.apple.com/en-us/HT203987
    Also read the articles below to be more prepared for the next time there is an issue on your computer.
    https://discussions.apple.com/docs/DOC-7471
    https://discussions.apple.com/docs/DOC-8071
    http://www.thesafemac.com/tech-support-scam-pop-ups/

  • OMB script to remove DBLink and Schema configuration from mapping

    In OWB903 we have used prefixes for most of our tables used in mappings. (By right clicking on the mapping, choosing configure and then setting the Schema/DB Link for each table under "Sources and Targets")
    We are now in the process of upgrading to OWB 904, and because of the way OWB 904 handles locations we would like to remove the prefixes from the mapping configurations. Our project consists of 100+ mappings, so it would be nice if it was possible to do this by runing a OMB script.
    I would appreciate it very much if anybody can come up with an example of how to do this.

    Roald,
    Here is an example of a OMB script that renames all the tables in a project (to run a script, you have to open the OMBPlus application and enter 'source <filename>' on the prompt, where filename is the name of the file containing the script):
    # rename.tcl
    # Renames the names of tables, mappings, cubes and dimension for a project.
    # Prefixes the names with 'WH_'
    # Please update the connection information here.
    # The connect string format is repository_user/repository_pwd@hostname:port:service_name
    # Connecting to the repository:
    OMBCONNECT owb904/owb904@localhost:1521:ora9201
    puts "Connected to repository."
    # Setting the project and prefix variables (set project name here):
    set MProject MY_PROJECT
    set wh WH_
    #Open the project
    # Entering into the Project (CC = Changing Context):
    OMBCC '$MProject'
    set module_list [OMBLIST ORACLE_MODULES]
    # Loop to enter into each project module:
         foreach i in {$module_list}{
              puts "Working on module: $module_list ."
              OMBCC '$module_list'
              set table_list [OMBLIST TABLES]
    # Loop to prefix the name of each table in the current module:
                   foreach j in {$table_list}{
                        puts "     Working on table: $table_list ."
                        OMBALTER TABLE '$j'
                             RENAME TO '$wh$j'
    puts "Done."
    # Saving the changes:
    OMBCOMMIT
    # Disconnecting from the repository:
    OMBDISCONNECT
    As you know, OMBPlus is based on the TCL scripting language. For more info on TCL, take a look at:
    http://www.scriptics.com
    Also, for more info on the OWB specific commands, take a look at the Users guide.
    Regards:
    Igor

  • How do we remove our current phone numbers from our old iPhones?

    So my girlfriend and I both upgraded our iPhone 5 to the iPhone 6.  We backed up both phones and transferred everything to the new phones.  I was thinking about selling the phones but I noticed that my current number is still on my old phone and my girlfriends number is still on her old phone.  The number is located when
    I tried researching this but nothing seems to work.  I did the Settings/General/Reset/Erase all settings and content.  I have tried doing it through iTunes.  Its like the phone is ready to be set up as new, and everything is cleared on the phone except our numbers.  We are not signed into iCloud.  I even signed on to my iCloud account on my girlfriends old phone but her number still shows.  Its very frustrating. 
    Bottom line, is I am trying to get rid of our current phone numbers that are still on our old iPhones.
    EDIT: I just realized that our old iPhones still says Verizon on them.  Do we possibly have to deactivate the phones some how?  If so, how do we do that?

    Fixed the issue by doing:
    Switched off Face Time (Setting -> FaceTime-> FaceTime OFF)
    Switched off iMessage(Setting -> Messages->iMessage OFF)
    Switched on iMessage (The phone started “Verifying”the incorrect phone number, failed and set it to the correct ported number (seeSettings -> Messages -> Receive At -> Phone).
    At this point the “My Number” (Settings ->Phone -> My Number) had also updated.
    Switched on Face(Same “Verifying” as with iMessage, but tooktwo attempts).
    Power Cycled the ‘phone and re-synced to updateiTunes (Summary “Phone Number” field).
    Hope this helps!
    Taken from Change "My Number" iPhone 4S

  • How do i remove my old apple id from an old iphone...i cannot access via email nor security questions, pw does not work.

    I got rid of my old iphone and opened new apple id and pw on this new ip4s. I cannot access the old apple ID via usual
    access ie., security questions, password or email verification. The email never arrives and when I answer the security it states incorrect answer.
    I just want to delete that old apple id account for security reasons, hackers, thieves, potential unknown risks.
    Please advise.
    Thanks.
    C.

    The Apple ID exists. The email address you used to create it may not, but the Apple ID does. Call AppleCare and ask to speak to someone in account security.

  • HT1688 I made the mistake of downloading my entire I tune library to my phone how can I remove it and  and replace  with playlist .

    i put my entire itunes library on my phone how can i remove it and replace with playlist

    Open itunes, connect iphone, select what you want on the iphone, sync

  • Need to remove photshop and elements 8 from this old win xp computer and install it on new computer. I have the hard copy of the program, howeve registration here may prevent me from re-installing

    how can I remove photoshop and elements 8 from this older computer and install on new computer when it arrives

    You uninstall using the Windows control panel, and you install the same way you did on your old computer... put the disc in the drive and follow the onscreen instructions
    Also, unless you are asking about CLOUD programs, you will do better in the specific program forums
    Photoshop General Discussion
    Community: Premiere Elements | Adobe Community
    Photoshop Elements Forum http://forums.adobe.com/community/photoshop_elements

  • How do I remove the rectangle label on a Maps location but leave the red pin?

    How do I remove the rectangle label on a Maps location but leave the red pin?  I find the label can get in the way and I can't read the map properly, if I could see only the red pin then I could read the streets around it.  If I touch the label then I get a new screen with address details.  Another thing I tried and I ended up with a course plotted to drive from my current location, neither of these things I wanted. 
    Thanks,
    GT. 

    Dear Tom,
    I appreciate your time in helping me with this issue.
    Hopefully the following will clarify my issues.
    Also, apologies I meant 1920 x 1080.
    Regards
    Marilyn
    File info:
    File before I import it into FCPX (no blur transparency on sides)
    File info within FCPX:
    File post export - see the grey transparency in the file?

Maybe you are looking for