How do I remove migrated data?

I want to remove all that I have migrated to my new MacBook Pro. How do I do this?

If you use Time Machine or another backup device, you can simply replace a previous version of the software. If you don't use Time Machine or haven't backed up, your options are more limited: change the data manually, or reinstall.

Similar Messages

How do I remove "other" data from my phone?

I recently tried downloading a movie in the SD format that was around 2gb or so. I had over 2gb of empty spac eon my phone to rent the movie. the movie started to download fine and I left it to download. I went to videos and the rental shows up however it says there isn't enough room to download it. there is no data under videos howver there is over 2gb of added data to my phone under the "other". Itunes continually wants me to download this rental but I can't with 190mb. I'm guessing the movie already downloaded and something went wrong and it wants me to download it again. I did get a refund for the movie but the space it takes up is still there. Does anyone know how can I remove this data? I tried restoring a backup and emailing customer support and nothing has changed.

Kappy's User Tip to deal with "Other": https://discussions.apple.com/docs/DOC-5142
Delete your messages. Remove the attached files such as pictures and videos.

How do I remove a date and time mark on a stored photo so I can put it into a calendar

How do I remove a date and time mark on a stored photo so I can put it into a calendar.....?

In Iphoto, yes. You can use PhotoShop Elements or some other editor. You can also crop. (You might be able to make the retouch brush smaller.)

Lost my old iPhone ..... how do i remove the data in other Apple devices?

My old iPhone (3GS on IOS 4.1 before iCloud was introduced) is lost. It was synchronized using iTunes. I have other devices (iPad, iMac). How do I remove the data created in that iPhone from Calendar, etc. The recurring event created in that old iPhone will continue until I remove them.
Appreciate the help

Settings -> General -> Reset -> Erase all Content and Settings
or restore it to factory settings:
http://support.apple.com/kb/HT1414
Regards.

How do I remove all data in OS 10.9.4 ?

How do I remove all data from OS X 10.9.4? This is a late 2010 MacBook Air I want to donate to a friend. Thanks.

Click here and follow the instructions. When you reach step 5, connect its original thumbdrive, restart with the C key held down, use the Disk Utility to erase the internal drive, and install a fresh OS.
(111185)

How can I remove birthday date on my iPhone 4

How can I remove birthday date on my iPhone 4

Find the person whose birthday you want to delete in your contacts and check if their birthdate is there. If yes, simply edit the contact and delete the birthday field.

How can I remove safari data from shared iCloud account?

Before iOS 8 and family sharing I was using a single iCloud account shared among several Apple devices in my household. Now that we are all using our own separate Apple Accounts I want to delete shared data from other devices that were using my iCloud account. For example, my wife and I both have data synched with iCloud (the same account) for Safari. Now that her phone has been switched over to her own AppleID, I want to purge the data stored in my icloud account from her device. When I open Safari on my phone, I can see a list at the bottom of tabs that my wife had open on her phone at one time in the past. That list will never get updated now that she is using her own account. So how do I purge old data from other devices off my iCloud account?

If she's on a different account now, Safari data from the previous account should no longer be on her device. iCloud tabs, on the other hand, will persist from a device that is no longer sharing the account for 14 days, after which they are automatically cleared. (This is coming from iCloud, not from her device.) You might try waiting a couple of weeks and see if they aren't automatically removed.
If you're still concerned, you could always ask her to go to Settings>Safari and tap Clear History and Website Data. This won't clear her iCloud tabs from your device though; you'll have to wait for that.

How do I view Migrate Data errors - Access 2003 - Oracle 10g

I'm trying to use the SQL Developer to migrate data from an Access 2003 database to an Oracle 10g database. I followed the instructions found here:
http://www.oracle.com/technology/tech/migration/workbench/files/omwb_getstarted.html
I was able to complete every step except the actual data move. I exported the xml for the Access database, I captured the export and then ran the generation scripts on my target Oracle database (I'm using the same schema for the migration repository and the actual data). It created the tables with only one or two errors which I resolved.
Now, when I select Migration->Migrate Data, I get the dialog that appears to start 4 or 5 threads and attempts to migrate each table. They all error and do not transfer any rows. I can see that there's one error per table, but I can't see the error text. I just know that an error occurred. Is there a log somewhere or is the error displayed somewhere else? How do I know what's gone wrong?
Thanks.

I too receive unexplained error counts using the Migrate Data menu selection and unexplained failures using the Generate Data Move Scripts menu selection. Permissions granted by role or direct grants should not be a problem, but a Migrate Data error appears in the Migration Log panel at the bottom of the SQL Developer window, "Failed to disable constraints: ORA-00942 ... ". No further details available on what constraints or why the error. No other errors were detected while following the instructions found in the Oracle SQL Developer Migration Workbench Getting Started guide. SQL Developer never migrates the data from the existing Access 2000 mdb file to the newly created schema objects in Oracle 10g using either method. The following roles and privileges have been granted to both the repository owner and the target schema owner:
GRANT RESOURCE TO MIGRATE_USER WITH ADMIN OPTION;
GRANT CONNECT TO MIGRATE_USER WITH ADMIN OPTION;
ALTER USER MIGRATE_USER DEFAULT ROLE ALL;
-- 25 System Privileges for MIGRATE_USER
GRANT CREATE ROLE TO MIGRATE_USER;
GRANT ALTER TABLESPACE TO MIGRATE_USER;
GRANT ALTER ANY SEQUENCE TO MIGRATE_USER;
GRANT INSERT ANY TABLE TO MIGRATE_USER;
GRANT SELECT ANY TABLE TO MIGRATE_USER;
GRANT CREATE ANY TABLE TO MIGRATE_USER;
GRANT UNLIMITED TABLESPACE TO MIGRATE_USER WITH ADMIN OPTION;
GRANT DROP TABLESPACE TO MIGRATE_USER;
GRANT CREATE ANY TRIGGER TO MIGRATE_USER;
GRANT ALTER ANY ROLE TO MIGRATE_USER;
GRANT CREATE VIEW TO MIGRATE_USER WITH ADMIN OPTION;
GRANT DROP USER TO MIGRATE_USER;
GRANT CREATE TABLESPACE TO MIGRATE_USER;
GRANT GRANT ANY ROLE TO MIGRATE_USER;
GRANT CREATE ANY SEQUENCE TO MIGRATE_USER;
GRANT ALTER ANY TABLE TO MIGRATE_USER;
GRANT DROP ANY TRIGGER TO MIGRATE_USER;
GRANT DROP ANY ROLE TO MIGRATE_USER;
GRANT DROP ANY SEQUENCE TO MIGRATE_USER;
GRANT UPDATE ANY TABLE TO MIGRATE_USER;
GRANT ALTER ANY TRIGGER TO MIGRATE_USER;
GRANT COMMENT ANY TABLE TO MIGRATE_USER;
GRANT DROP ANY TABLE TO MIGRATE_USER;
GRANT CREATE PUBLIC SYNONYM TO MIGRATE_USER WITH ADMIN OPTION;
GRANT CREATE USER TO MIGRATE_USER WITH ADMIN OPTION;
-- 1 Tablespace Quota for MIGRATE_USER
ALTER USER MIGRATE_USER QUOTA UNLIMITED ON USERS;
Operating system for both Access 2000 and Oracle 10g is Windows XP PRO SP2.
Oracle SQL Developer is version 1.1.2.25 build MAIN-25.79 on Windows XP PRO SP2. All three are on the same PC.
Since only the last step failed, I created a User DSN with the ODBC administrator. Then, linked the newly created Oracle table to Access via ODBC using the DSN created. Next, I created an append query with the source being the Access table and the target being the Oracle table. I moved the data by pressing the red exclamation mark.

How Do You Remove The Date Stamp Setting On The Powershot A590 IS?

The Date Stamp on our Powershot A590 IS was set by accident, and now we cannot seem to remove it. Anyone know how to change this setting, so that the Date Stamp will not be embedded within our photos (it even seems to be showing up on ALL of our pictures, not just the postcard sized ones . . . but those are our biggest problem, as that's the size we tend to use most)?
Again, I'm not asking how to remove a Date Stamp from a picture, but how to change the settings so that the Date Stamp isn't applied in the first place.
Any help would be appreciated; Thanks!
-DrSolomonology

Here is excerpt from the manual (p 22): http://gdlp01.c-wss.com/gds/6/0400000016/01/PSA590IS_CUG_EN.pdf
1.
Press the power button.
2.
Select a shooting mode.
1. Set the mode switch to (shooting).
2. Set the mode dial to .
• You can also make this setting in other shooting modes
(except Easy and movie modes).
Select DATE/STAMP
Press FUNC/SET button
Press UP/DOWN or LEFT RIGHT button to change the settings.
Weekend Travelers Blog | Eastern Sierra Fall Color Guide

How do you remove the date/time stamp from a photo before printing?

I have one group of photos in an event that have the date and time stamp on them. I don't know how to remove the date/time stamp before printing.

If you have your camera set to imprint the date/time on the photo you can not "remove it - it is a part of the photo - depending on the surounding photo you might be able to retouch it out
LN

How do I find migrated data on Mac Mini

I have migrated data from windows to new Mac mini. Now I am not finding iTunes music transfer over and email did not setup. How can I find this data and import into iTunes and mail?

Open the Users folder on the internal drive, move one account's home folder to the other account's desktop, and retrieve the files from there.
(84559)

How do I remove crontab data I set up?

Hi there,
I recently edited my crontab so that my external hard drive would automatically mount and unmount once a night for backup purposes. I learnt how to do this from this site:
http://hints.macworld.com/article.php?story=20070313192221659
Now I don't need my external hard drive to automatically mount and unmount anymore and I pretty much want to remove the data from the crontab. I'm not sure if it's just a matter of going into it by typing crontab -e and removing the text or if I actually need to delete a file within Mac OS X or something else.
Thanks for your time and I hope to hear from somebody soon.
Regards,
Daniel

Terminal and Unix oriented questions are best asked in the Mac OS X Technologies > Unix Forum
<http://discussions.apple.com/forum.jspa?forumID=735>
As you guessed, you just use
crontab -e
and remove your entry.
When you exit the editor, crontab will update the daemon that runs cron jobs.

How do I remove certain data being imported from a php file

I have data being loaded from a php into an xml class.
My host (which is free for testing purposes) keeps adding data to the php file which causes errors. I need to know how I can delete this extra text before I put the data into an XML class so I do not get the error. I did a trace of the data and this is what comes up below. I need everything below the </data> tag to be removed but do not know how to do this. Can someone please help me.
<?xml version='1.0' encoding='UTF-8'?><data>
    <google rate='21' />
    <yahoo rate='3' />
    <msn rate='2' />
    <tv rate='10' />
    <diger rate='4' />
</data>

<script type="text/javascript" src="http://analytics.hosting24.com/count.php"></script>
<noscript><a href="http://www.hosting24.com/"><img src="http://analytics.hosting24.com/count.php" alt="web hosting" /></a></noscript>

Thanks,
Jason

in your load complete function:
var s:String=e.target.data;
var xml:XML=XML(s.split("<!-- www.000")[0]));

How do I remove migrated PPC apps from Intel iMac that has the same apps?

Before I begin, please know that I've read a lot of previous posts but all the posts only had some of what I needed so I'm posting this as a new topic. OK, here I go:
My PPC running 10.5 just froze-up (that has since been solved) but in the process of solving that issue, I migrated everything as a different user (User B) INCLUDING my applications, to my Intel iMac - my iMac that also had the same applications on it - except they were intel versions and they were under User A.
So I essentially did an archive and clean install on my PPC.
Then, using Migration Assistant, I transferred User B onto my PPC. Now both of my computers have duplicates of most of my applications. In trying to fix this issue, I found out I should NOT have transferred my applications. So now I'm very confused as to which apps I should remove off my PPC and which I should remove off my intel iMac.
If I just delete User B from my intel iMac, that's easy enough but will that remove the dupes? I have a funny feeling it doesn't.
And then, which do I remove from my PPC?
AND THEN, are there other things I will need to remove from different places on my computer?
Any help would be greatly appreciated. Thanks!
And now, I've used migration assistant to move everything from user (B) back to my PPC. Now I have duplicate applications with "(from old mac)"

Normally application go in the Applications folder at the top level of the hard drive, not in any user folders. If you have applications in user folders that are the same as those in the Applications folder, you can delete them from the user folders. If you actually migrated PPC applications into the Applications folder on an Intel Mac, it would have replaced the Intel versions. To fix that,you would have to reinstall OSX on the Intel Mac.
The same thing would apply on the PPC Mac.

How can I remove all data from the iPhoto app?

I wanted to reset my iPhoto library and remove all places, faces and events recognized from the pictures, so I copied my iPhoto library to a hard drive and then deleted it and emptied the trash. Copied the data to iPhoto again and took a look. The library was exactly the same. When I saw my activity monitor I realised there were just 12 gigabytes remaining in my hard drive (I'm using a 128GB Macbook Air) and before doing all this there were 47 gigabytes remaining. My iPhoto library is about 35GB, and I think I didn't replaced the library, I duplicated it. I'd really like to know if someone can help me finding the other library and deleting it, because I'm getting out of space in my mac.

Your post is not clear
I wanted to reset my iPhoto library and remove all places, faces and events recognized from the pictures, so I copied my iPhoto library to a hard drive and then deleted it and emptied the trash.
OK
Copied the data to iPhoto again and took a look.
Exactly what does this mean?
Probably your best bet is to run your iPhoto library on an external drive
Moving the iPhoto library is safe and simple - quit iPhoto and drag the iPhoto library intact as a single entity to the external drive - depress the option key and launch iPhoto using the "select library" option to point to the new location on the external drive - fully test it and then trash the old library on the internal drive (test one more time prior to emptying the trash)
And be sure that the External drive is formatted Mac OS extended (journaled) (iPhoto does not work with drives with other formats) and that it is always available prior to launching iPhoto
And backup soon and often - having your iPhoto library on an external drive is not a backup and if you are using Time Machine you need to check and be sure that TM is backing up your external drive
LN

How do I remove migrated data?

Similar Messages

Maybe you are looking for