How do I remove MSI Ti4200 drivers?

I have an MSI Ti4200 and Win98.
I installed the latest MSI video card drivers.
But now I want to remove them and install the Nvidia ones.
No matter what I do, I can't seem to remove the MSI drivers completely.
What's the uninstall procedure?
Thanks,
MrMatt

MrMatt,
After you uninstall the MSI drivers, do a search for msicpl.dll and delete it. You will find it in your Windows directory. That will get rid of the MSI tabs.
Take Care,
Richard

Similar Messages

How Do I Remove Existing BootCamp Drivers in Windows 7?

I've just replaced my 2009 Mac Mini Server with the 2012 equivalent. I've successfully utilised WinClone to clone my BootCamp partition from one Mini to the other. My copy of Windows 7 Professional 64bit opens as expected, and I've successfully re-entered my Windows Product Key.
My only unresolved problem is in re-installing the BootCamp drivers. I have already downloaded the latest BootCamp drivers to my pen/thumb drive, and inserted it in my Mac Mini once Windows has started. On starting the BootCamp package, and attempting to install the drivers, I am alerted to 'a network problem' - which prevents me from installing the latest drivers.
I suspect the problem resides in an existing BootCamp Manager v4.0.0.0 being present on my Windows install (from my previous Mac Mini).
On locating the existing BootCamp Manager, Windows will not permit me to delete/remove the program and its associated files.
I would therefore appreciate some assistance on either issue: installing new drivers, and/or, removing the existing BootCamp drivers.

The problem has resolved itself...
...despite spending several pointless hours trying to delete the existing BootCamp drivers without success, I finally restarted Windows yet again - and this time I was easily able to delete the existing drivers.
I then restarted my Mac, installed the latest drivers without issue and it all works just fine.
Windows, eh?!

HELP MSI TI4200 8x not working

I am currently using a P4 1.6 with ASUS P4S333 and just bought MSI Ti4200 8x 128 MB VTD and it is not working at all on this mobo. I reinstall my ASUS GF 3 Ti200 and it works......
I did took the new MSI Ti4200 8x and install it into my old Celeron 533Mhz on a MSI mobo and it works ....means my graphic card is working .....
ANy idea how to get this MSI Ti4200 to work on my P4S333 ???

Thanks for post. I've tried the KDS monitor over to the DVI connector but it still doesn't work. In addition, I have tried my old monitor on the DVI connector and it works. I have checked the pins and they are not bent or damaged.
Is there a such thing as compatibility issue with the KDS and MSI video card? Please help, anyone with any other advice or ideas? Thanks.

How can i remove iTunes 10.1.0.54 saying the feature you are trying to use is on a network resource...enter an alternate path to a folder contaning the installation package 'iTunes.msi'?

How can i remove iTunes 10.1.0.54 saying the feature you are trying to use is on a network resource...enter an alternate path to a folder contaning the installation package 'iTunes.msi'?
< Edited by Host >

Unfortunately, this sort of trouble has gotten more complicated to deal with ever since Microsoft pulled the Windows Installer CleanUp utility from their Download Center on June 25. First we have to find a copy of the utility.
Let's try Googling. (Best not to use Bing, I think.) Look for a working download site for at least version 3.0 of the Windows Installer CleanUp utility. (The results from mydigitallife and Major Geeks are worth checking.)
After downloading the utility installer file (msicuu2.exe), scan the file for malware, just in case. (I use the free version of Malwarebytes AntiMalware to do single-file scans for that.)
If the file is clean, to install the utility, doubleclick the msicuu2.exe file you've downloaded.
Now run the utility ("Start > All Programs > Windows Install Clean Up"). In the list of programs that appears in CleanUp, select any iTunes entries and click "Remove".
Quit out of CleanUp. Restart the PC, and try another iTunes install. Does it go through properly this time?

How do I remove iTunes 10.2.2.12 from computer? I get a message that iTunes.msi file can not be found, so I can't remove it. Help

How do I remove iTunes 10.2.2.12 from Windows XP?
I get a message that iTunes.msi can not be found or is corrupted.
I want to install latest version, but can't get remove older version.

Try my script FindTracks. Select a few of the missing files to start with then run the script. Choose No at the first prompt so that you can check how it works track by track, then confirm or edit the location of the media folder where your files are. Once you are happy with how it behaves let it process larger numbers of tracks automatically.
tt2

How do I remove NIDAQ drivers version 6.8.1 when thier is not an uninstall file?

How do I remove NIDAQ driver version 6.8.1 when their is not an uninstall file? I tried installing the latest version of NIDAQ, but am unable to until the old version (6.8.1) has been uninstalled. There is no uninstall feature in the add/remove option (The system is running Windows 2000 Pro), or in the National Instrments / NIDAQ folder. Does this have to be resolved through the registry? If so can someone walk me through the procedure? If not do you know of another method? Thanks in advance for your help.

Hi pmtec,
NI-DAQ 6.8 is actually installed within LabVIEW for that particular version. It can be uninstalled from your LabVIEW uninstaller. For more detailed information on this see the following KB:
http://digital.ni.com/public.nsf/websearch/08F0A1CF535D995086256AB6006BDEFC?OpenDocument

MSI TI4200 VTP not recognised in K7N2 DELTA

Hi All First Post and very Confused
Spec First
MSI TI4200 VTP Graphics
K7N2 Delta LISR M/B
AMD 2800 CPU
1GB Samsung P2700 DDR Ram
500 w PSU
80gb ATA 133 HD
120gb SATA HD
Windows XP Proff Edition OS
Problem is that I have just built this computer installed windows and all MB drivers and everything is fine I then install th Graphics card drivers and I get a blue screen upon the restart that is to quick to read and the system just reboots to the safe mode selection screen this is an ongoing loop if i select start windows normally. If i select safe mode the system boots up in safe mode.
I also noticed after I had taken windows back to last known good configuration that windows had not recognised my card and just showed VGA adapter with the yellow exclaimation mark. I have tried another graphics card and that worked fine.
windows installed it etc automatically
How can I read the blue screen or what is on it as it flashes up so quickly and what do you fine people think my problem is I have disabled 8x agp in bios
The TI4200 came out of my previous MSI KT400 Ultra
Please help
Longshanks

Doesn't matter if the old PSU ran your old system. That's not the case now. We need the make, model, and specs of your PSU.
We can't help you if you don't give us the info we requested. Obviously, you have a problem and you can't find it, so you're possibly overlooking something. Read my article on PSU's at the top of the forum. Total wattage rating doesn't guarantee a thing, and many PSU manufacturers intentionally deceive their customers.

MSI TI4200 VTP not registering in windows XP K7N2 DELTA LISR

Hi All First Post and very Confused
Spec First
MSI TI4200 VTP Graphics
K7N2 Delta LISR M/B
AMD 2800 CPU
1GB Samsung P2700 DDR Ram
500 w PSU
80gb ATA 133 HD
120gb SATA HD
Windows XP Proff Edition OS
Problem is that I have just built this computer installed windows and all MB drivers and everything is fine I then install th Graphics card drivers and I get a blue screen upon the restart that is to quick to read and the system just reboots to the safe mode selection screen this is an ongoing loop if i select start windows normally. If i select safe mode the system boots up in safe mode.
I also noticed after I had taken windows back to last known good configuration that windows had not recognised my card and just showed VGA adapter with the yellow exclaimation mark. I have tried another graphics card and that worked fine.
windows installed it etc automatically
How can I read the blue screen or what is on it as it flashes up so quickly and what do you fine people think my problem is I have disabled 8x agp in bios
The TI4200 came out of my previous MSI KT400 Ultra
Please help
Longshanks

what was the other vga card
post max amps of psu
try it at agp x4 ,disable agpx 8 in bios

Msi ti4200-8x and games bundle

Hi,
just bought a msi ti4200-vtd8x, and started to play with the bundled software.
Some of the bundled games do not run at all !
these worst are : sum of all fears demo
and ghost recon.
These install but crash during the game start, just a short moment a black screen, and the back to the desktop.
my testing sofar :
Not running in my msi 845e max2blr + ti4200-vtd8x with win98se
Not running in my msi 845e max2blr + ti4200-vtd8x with win2k
Not running in my ecs k7s5a + ti4200-vtd8x with win98se
They run in my asus k7v133 + matrox marvel G400 with win98se, although a bit slow...
So, do I have a defective videocard, or is the gamesbundle not tested by MSI ?
George

Richard,
the rest of the hardware is not very interresting,
My P4 system :
floppy drive.
p4 2.4Ghz 533 fsb + 2 * 512 Mb ddr
MSI 845e max2 blr (lan,sound,raid etc all used)
2 80G maxtor in raid0
1 80G maxtor for the OS (win98SE or win2k sp2)
liteon DVD
liteon cdrw temporarily removed (something wrong with it)
and 1 PCI card : realtek 8029(AS) because I needed to connect to a BNC network.
And of course the MSI ti4200-vtd8x
All bundled in a AOPEN H600A housing with 300W supply.
After inserting the ti4200, I had a stable system, until I
closed my computer case. So I have added some extra fans.
This system refused to run some of the bundled games (SOAF and Ghos recon) using win98se or win2k.
all drivers from the MSI installation CD's
So I tried another system :
amd athlon tb 800Mhz + 256Mb sdram
floppy drive
ECS k7s5a (lan, sound)
20 G maxtor with win98se
AOPEN DVD
another AOPEN housing with 250W power supply.
and I put the TI4200 in this system.
same games refused to run.
So I tried on a third system, to check if the fault is in the games :
amd athlon xp 1800 @ 1.6Ghz + 1G sdram
asus a7v133 + raid
terratec 1024 sound
realtec 8139 lan
1 40gb maxtor
1 80gb maxtor
2 40gb maxtor in raid0
asus dvd
liteon cdrw
matrox marvel G400TV 16Mb agp videocard.
300W or 350W powersupply.
and those MSI bundled games run !
so this leaves 2 possibilities :
- msi ti4200-vtd8x is defective
- bundled games do not work with this newer agp 8x card type.
George

[GeForce 6] removing msi driver completely

hi, guys i have a msi 6800gt agp, i've had for a while now almost 14months, my problem is that the msi drivers will not go away, ive uninstalled them couuntless time and installed the standard nvidia ones, but the MSi in dispplay properties will not go like MSI clock and MSI information. How do i remove these headaches form my system. thanks (i have tried driver cleaner pro)..

Quote from: mcmoe on 17-December-05, 08:36:13
hi, guys i have a msi 6800gt agp, i've had for a while now almost 14months, my problem is that the msi drivers will not go away, ive uninstalled them couuntless time and installed the standard nvidia ones, but the MSi in dispplay properties will not go like MSI clock and MSI information. How do i remove these headaches form my system. thanks (i have tried driver cleaner pro)..
How about a regcleaner. a.k.a Register cleaner.

How do you remove error 0X00000709 from your computer? I just removed one printer and added another!

     I have a HP Pavilion Elite HPE computer and had an HP 6500 printer as my default. I purchased a LaserJet Pro CM1415 and loaded it into my computer and removed (I thought) was the software for the HP 6500.
     However when I try to make the CM1415 my default it gives me an error 0X00000709 and tells me I can not do it. I no longer have any other printer listed, however I noticed some programs (Adobe for instance) don't even recognize the new printer, just the 6500 which got removed. I have already removed the drivers (software) for the new printer and reloaded it. Also I checked the registry and the 6500 is listed there. I did nothing with the registry at this time.
     I would like to know how I can remove this error and make my new printer the default (only one listed) one? Thanks in advance for any and all answers

Hello Porgeman,
You may want to try the solution that is mentioned on this Microsoft Answers thread.
http://goo.gl/y3mtw
Method: Try to change the default printer value in registry key and check if it helps.
Registry Disclaimer: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems might occur if you modify the registry incorrectly. Therefore, make sure that you follow these steps carefully. For added protection, back up the registry before you modify it. Then, you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following article number to view the article in the Microsoft Knowledge Base: 322756 .
How to back up and restore the registry in Windowshttp://goo.gl/UPP7r)
a) Click on Start.
b) Type regedit in the start search and click Enter.
c) Move to the location mentioned below.
HKEY_CURRENT_USER\Software\Microsoft\Windows NT\CurrentVersion\Windows
d) In the right column, you will find key Device, change the value to your Printer name.
e) It is of the format for example: "HP LaserJet 4250 PCL6,winspool,Ne03:".
f) Right click on the value and click on Rename, change it to your printer name.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

How do I remove BlackBerry Maps from the OS?

I have a Z10 running 10.3 it's a great update and so far love the BB Assistant. There is one big sore point for me and that is your decision to deeply integrate BB Maps with 10.3 and Assistant.
Appologize upfront but I have to ask....Why would you integrate a lagging-edge Mapping App with an otherwise leading-edge OS in 10.3?
So long story short...BB Maps doesn't work for me. (No Walking, Mass No Transit, No Satellite or Street View equivilants.) The bottom line is that enterprise users need more than what BB Maps offers today and for the foresable future. Just supremely frustrated about this situation and feel bad because 10.3 is great.
So the question is How do I remove BB Maps from 10.3 or completely disable it. I just want it gone at this point. Please help....I'm so totally frustrated that you can't easily remove it!
Thank you and please let me know as soon as possible how to accomplish this.
Solved!
Go to Solution.

Good news...Just to let you know I did find a way to remove BB Maps.
Even through it's a core app by reverting to a previous version of BB Maps I was able to delete it from the OS. iBest part is there was no impact to the OS and everything else works as normal. Please Please ...if your going to make BB Maps a core app please make sure its a world class app and it works for all Enterprise users. (Not just for drivers)
I can truely say my BB OS 10 experence is much better now without BB Maps. If BB isn't going to invest in Maps then please don't make it a core app and tightly integrated into the OS. I think at this point BB would be better off outsouring BB Maps to one of the leading Map providers such as Nokia, Mapquest, Bing/MS or even dare I say Google Maps. I think the BB community would be much happier with any of the first three.
Thanks

How to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

how to completely remove mac os and install windows 7 on macbook pro with retina display 15 inch

There's not much sense in purchasing a Mac to run only Windows on it. Keep in mind that drivers for Windows are a secondary concern for Apple. While Windows will typicall run fine, things like power managment are not optimized under Windows (you'll get less time on battery while running Windows). You will also not be able to install firmware updates. Firmware updates might be necessary whether you run Windows or OS X as they are updates to the code in your hardware and are not OS-specific. You must be running OS X in order to install a firmware update. You can do this even if you boot off of an external drive with OS X installed on it. At the very least, you should keep just a small partition for OS X on your internal drive.

How do i remove itunes 7 completely??

Just wondered how i can remove itunes 7 completely as it will not recognise my ipod while itunes 6 on my other laptop will pick up my ipod fine. Mind you my laptop wont notice the ipod either? could this be to do with what xp version it could be running??

It might be your laptop's problem, not necessarily iTunes (although that's possible).
Before we go back to iTunes 6, have you first tried going through these five steps?
The Five R's
Also, faulty or out of date USB drivers on your computer might be a possibility here:
iPod not recognized properly by computer when USB drivers are not installed properly or are out of date
EDIT: Here is a major possibility when an iPod is not recognized on a laptop, so go ahead and try this step first:
iPod not recognized when connected to Windows laptop over USB
-Kylene

Bios update failed on MSI TI4200-T8X64 graphics adapter

during the installation procedure of a new desktop we proceeded the update of live update 2 to live update 3 -
afterwards we checked the availability of a new vga bios and tried to install it to the MSI TI4200-T8X64 graphics adapter of the desktop -
the installation failed and after the reboot the graphics adapter did show any results anymore -
so we had to insert a second vga card (pci) and swith to primary pci vga usage in the desktops bios -
so we are able to start windows, but we are not able to get a functional bios via live update 2 or 3.
where do we get a functional bios version and the flash-tool for our graphics adapter????
thanks for your quick help!
christian

I think there should be a jumper on that card, I have the 4200 VTD128 8x model and there is a jumper with a green shunt. Look in the Bulletin at the top of this VGA forum, there are instructions on how to recover from a bad BIOS flash(If the jumper is present)
If not, Please give the number on the BIOS sticker, it should say for example:n8894MS100 something like that.
What is the part number in white silkscreen lettering on the fan side say?

How do I remove MSI Ti4200 drivers?

Similar Messages

Maybe you are looking for