How do I remove my own copyright from a photo

How do i remove my own copyright and or watermark from a photo please

dj_paige answered for watermark, I will do for copyright:
Go to library, metadata panel, and remove your copy-right entries. You might also set the status to unknown.
Then LR has no source any more to grab copyright data from, no matter if you display this in a watermark or in (exported) metadata.
Cornelia

Similar Messages

How do I remove a white background from a photo of a watercolour painting.

How do I remove a white background from an image of a botanical watercolour painting?

Is the logo in a pixel layer surrounded by white?
You could make it a layer if it isn't already, then use the Layer Style dialog and set the Blend If parameter so that it will make light colors transparent...
You can composite it into a web page with transparency by saving it as a PNG file, as JJMack has noted.
-Noel

How do I remove Ken Burns effect from individual photos?

The instructions say to " In the Photo Settings window, deselect the Ken Burns effect checkbox and then click apply". My interface shows the word "update" instead of "apply" which has worked when I change other settings such as the length of time a photo is displayed. However every time I deselect KB...it comes back! I have also tried to constantly save the project, trying to save the deselect process.
Has anyone an idea? BTW the KB effect is very poor for most vertical pictures as it will cut off the top of the photo.
powerbook G4 Mac OS X (10.4.9) iMovie 6.0.3 version

• Yes, the Photo Settings window says Update instead
of Apply because you are updating an existing clip,
not importing a new one.
However every time I deselect KB...it comes back!
• Not sure exactly what you mean there. Do you mean
that in spite of unchecking the Ken Burns checkbox
the Updated clip doesn't change? It still has the Ken
Burns effect?
YES - see solution I found below.
If so, it sounds like iMovie may be failing to save
the updated clip to disk. That can occur if the
project resides on an external disk that uses the
wrong disk format. iMovie requires the Mac OS
Extended disk format. To check yours, see this:
http://discussions.apple.com/message.jspa?messageID=41
76921#4176921
I had our office software person check this out.
BTW the KB effect is very poor for most vertical
pictures as it will cut off the top of the photo.
• The Ken Burns effect can't read our minds. It only
does what we tell it to do. For photos that have a
portrait orientation it's normal to adjust the
zoom/pan so the rendered clip stays within the photo.
Note that it's possible to drag the photo in the
Preview window to adjust both the Start and End
points. So for a tall photo you may want to zoom/pan
up-or-down instead of side-to-side.
Note too that the settings in the Photo Settings
window always accept those settings of the last photo
we imported, updated or clip clicked on. So once
you've imported a tall photo with the Ken Burns
settings you like, you can easily apply those
settings for another photo. Just click on that
previously-rendered tall clip in the Timeline before
importing your next tall photo.
Karl
Karl,
Thank your for your input and in the last couple of days I have been able to produce the iMovie. But I now have another question about burning it.
Let me point out that I was able to deal with the Ken Burns issues by deleting the photos I wanted to change and replacing with new photos and using your tips + the help menu on "adding motion to your photos" to zooming right / left / vertically (which was very helpful).
Now that I have my project I cannot burn it as I get the following:there is not enough space to encode the aspects and in the pull down: "iDVD needs 2.350 GB of disk space to encode the remaining assets, but only 1.231 GB are available" I tried to cut down the files by deleting 5 chapters thus reducing the menu to one page showing chapters. I also re-saved the project with a new name.
BTW - I did burn it once but needed to fix it as the opening menu didn't have sound and I saw some other small photo details I wanted to fix. This version had 11 chapters on 2 menu pages with photos in the background. Essentially all I did was add a few more photos in motion and add the sound. That is why I thought maybe it was too much and removed the chapters saving one remaining page with music. I also do not have it on wide screen format as that uses more memory.
Can you help me with this? I don't understand why I'm getting the same message no matter what I do.
Many thanks,
Rozy

I keep seeing a dialogue box asking me to sign in to iTunes accounts that are not my own. How do I remove these other accounts from my phone?

I keep seeing a dialogue box asking me to sign in to iTunes accounts that are not my own. How do I remove these other accounts from my phone?

Try signing out of your iTunes account (scroll to bottom in the app), then sign in again.

How do I remove my apple id from my sons ipod and give him his own??

How do i remove my appl id from my sons ipod and give him his own

Create an Apple ID for your son...
Sign out of your account and get him to sign in with his new account...
Bear in mind that any Apps Purchased with your ID will not be able to be Updated with his ID...
The Apps are locked to your ID...
Apple ID FAQ
http://support.apple.com/kb/HE37

How can i remove the special characters from my keyboard on my iphone3gs

how can i remove the special character from my keybord keys on my iphone 3gs

What characters are you talking about exactly and why would you want to remove any?
There is really no way to modify Apple's keyboards or add your own in iOS, but there are some apps that may provide a work around.

How can I remove dropdown calendar menu from date/time field.

I set up a javascript calculation based on the input of a date field. As long as the user enters the date manually the script works fine. If user attempts to select date by drop down menu then script will not work. How can I remove the calendar feature from the Date field?

You may have to wire custom script to get you what you need. That would probably work on 'exit' event.
Just you give you better Idea here is some thing I have on a date field. If user types his own date instead of picking from calendar this code checks whether it is valid date or not and returns to the same field either they enter valid date or clear the field.
This is FormCalc script. You may get the idea how this works and make it work for you using the same logic either in FormCalc or JavaScript.
----- form1.SOF.Head.Table1.Row1.ReqDate.Date_ReqDate::exit: - (FormCalc, client) ------------------
if (HasValue($)) then
if (Len($.rawValue) == 10) then
var S1
var MM
var DD
var YYYY
var Derror
var D1
var D2
var S2
Derror = 0
D1 = 0
D2 = 0
S1 = $.rawValue
D1 = At(S1, "-")
S2 = Right(S1, 5)
D2 = At(S2, "-")
if (D1 > 0 and D2 > 0) then
if (D1 == 3 and D2 == 1) then
MM = Substr(S1, 1, 2)
DD = Substr(S1, 4, 2)
YYYY = Substr(S1, 7, 4)
elseif (D1 == 5 and D2 == 3) then
MM = Substr(S1, 6, 2)
DD = Substr(S1, 9, 2)
YYYY = Substr(S1, 1, 4)
else
Derror = Derror + 1
endif
else
Derror = Derror + 1
endif
if (Oneof(MM, "01", "02", "03", "04", "05", "06", "07", "08", "09", "10", "11", "12")) then
Derror = Derror
else
Derror = Derror +1
endif
//xfa.host.messageBox("MM"+ Derror, "Incorrect Date", 1, 0)
if ((Oneof(DD, "01", "02", "03", "04", "05", "06", "07", "08", "09")) or ((DD >=10) and (DD <= 31))) then
Derror = Derror
else
Derror = Derror + 1
endif
//xfa.host.messageBox("DD"+ Derror, "Incorrect Date", 1, 0)
if ((YYYY >= 1975) and (YYYY <= 2050)) then
Derror = Derror
else
Derror = Derror + 1
endif
//xfa.host.messageBox("YYYY"+ Derror, "Incorrect Date", 1, 0)
if (Derror > 0) then
xfa.host.messageBox("Preferred valied date between Jan 01, 1975 and Dec 31, 2050. ", "Incorrect Date", 1, 0)
xfa.host.setFocus($.somExpression)
else
//good
$.formattedValue = Format("MMM DD, YYYY", Concat(YYYY, MM, DD))
if ($event.shift) then
//xfa.host.messageBox("Shift")
var sh
sh = 1
//xfa.host.setFocus("xfa.form.form1.SOF.Head.RadioAttachTo.RadioAttachTo3")
else
if (xfa.event.commitKey == 1) then
var A
A = 1
else
xfa.host.setFocus("xfa.form.form1.SOF.Head.Table1.Row2.CustName")
endif
endif
endif
else
xfa.host.messageBox("Preferred valied date in format MMM DD, YYYY.", "Incorrect Format", 1, 0)
xfa.host.setFocus($.somExpression)
endif
endif
Good luck,
SekharN

How can i remove a hybrid mbr from my system drive so that Efi booted windows will install.

Hi,
i have just clean installed OSX lion on a freshly wiped drive in my macbook pro, using a bootable lion installer usb i used disk utility to partition my drive into a mac and a windows partition under the GPT/GUID partition scheme, i then proceeded to install lion onto the mac partition, and completed the set up, All Good...
so i plug in my Windows 8 EFI Boot USB stick (Notice, EFI boot here, NOT BIOS EMULATION BOOT), shutdown and power on the mac and proceed to the boot picker by holding option, So far so good, the usb key is recognised and the system boots into the Windows Setup in EFI mode, Enter product key, accept terms and so on, Now i select my Windows partition and windows Says That it cant install to Partition 4 (EFI Partiton, OSX Lion, Lion recovery, Windows), It says that it can only install to a GPT / GUID based disk as expected...
Why is there a protective MBR on my drive when i didnt add one, and i have not even touched bootcamp assistant...
How can i remove this Protective MBR from my drive so that my disk is PURE GPT so windows can install?
hours of googling has turned up nothing...
System:
Macbook Pro 13 inch Mid 2009
Mac os: OSX Lion
Version of windows trying to install: Windows 8 Release Preview 64 bit in EFI Mode

Alexander, I would like to apologize for the TERRIBLE answers you have been given so far. I too had this question, and so here is what my thoughts are, as maybe they might provide insight in leading you towards the answer.
I am a *nix user in general, and thus own a mac and a thinkpad. In fact I just got my thinkpad not too long ago. As such, I transfered my faster hard drive to my faster computer, which made logcal sense to me. Ergo, I moved my Mac drive to my lenovo. On this drive I have a hybrid mbr which is no longer needed. So my thoughts are this:
From what I gather, the UEFI standard indicates that there is to be a protective MBR on all GPT systems. This is so that when you use programs that are not GPT aware, they will see a presumably "full" drive and not think that they have the right to destroy your existing data in what it thinks is free space. For instance, fdisk or other MBR only partitioning systems. Thus, if your system has only a MBR with a single EE partition, it would be my guess that it was in fact not put there by installing Windows, but rather for the protection of your system.
If you are in my situation, where you do indeed have a hybrid MBR with written out partitions, it would be my guess that the only way to rid yourself of it is to do it manually. The way I would recommend, is using gdisk (gpt fdisk). It is command line only, but the syntax is pretty easy:
$ sudo gdisk /dev/disk0
Assuming you are using your mac partition and your primary hdd is disk0. That will put you into an interactive session of gdisk. Enter "?" for command options. What you need is the "recovery and transformation" section which is the "r" I think. From there I would say you probably want to create a new hybrid mbr (you will be using this to delete it). When it asks you for the partitions you would like to include, just hit enter. It should then ask you if you would like to create a protective entry for the remainder of the empty space. This is what you want so tell it to do that. After you are done, "w" will write and exit. You may want to first use the "p" to print and ensure that you have what you want. You can proabably check your work by using fdisk as so:
$ sudo fdisk -l /dev/disk0
I hope this helps you, and if you find that there is a better way, I hope you might enlighten this thread.
Cheers!
PS The command examples, the $ is to indicate it is a bash/shell command as a non-root user, do not include it in the command.

How do I remove the drop shadow from the value labes on my bar chart in Pages?

How do I remove the drop shadow from the value labes on my bar chart in Pages?

As far as I know, you must use brute force in the index.xml file describing the document.
Search the descriptor of your values labels
It starts with : <sf:SFCBarSeriesValueParagraphStyleProperty>
and delete the three items describing the shadow.
I highlighted it with red.
Yvan KOENIG (VALLAURIS, France) vendredi 8 juillet 2011 19:08:31 iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8
Please : Search for questions similar to your own before submitting them to the community
To be the AW6 successor, iWork MUST integrate a TRUE DB, not a list organizer !

HT1918 How do I remove a current iphone from my account and attach it to someone else's account?

How do I remove a current iphone from my itunes account and attach it to someone else's account?

Hi alice,
His texts using Messages on his phone? Does your husband have his own Apple/iTunes ID? If so, then he would need to go to Settings>Messages>Send & Receive, click on the Apple ID and then click on Sign Off. Then he would need to sign on his Apple ID. He would also need to make sure that the Send and Receive email addresses did not include your email address....
Cheers,
GB

HT201320 How do I remove my e mail from sons I pad?

How do I remove my e mail from sons I pad?

I don't think it will delete from other devices. Make a note of the settings first, so if it does, you can add it back again on the device where you want it!! Although that's pretty much done automatically.
I have an old iPad1 with multi-email accounts, but it's not iOS6.... on that you can select the account (in settings / email) and just switch off the accounts you don't want to pick up on that device.... not sure if you can do that in iOS6.
As to giving your son his own Apple ID.... well, as a parent myself, I'm sure you'll want to share an account to save buying the same thing multiple times. We have about 10 computers/devices all sharing one account, and by playng with the settings on each one, we are not having too many issues.

How do I remove an old username from the app store when using the update function

How do I remove an old username from the app store when using the update function.
I purchased my Mac used. The former owners username prepopulates when I try to perform the updated function on the app store. It does not allow me to use a different user name. I have created my own username and password. I have even been able to purchase items from the app store, it's just when I use the update function it does populate with my username. Any help is appreciated.

The first thing to do with a second-hand computer is to erase the internal drive and install a clean copy of OS X. You — not the previous owner — must do that. How you do it depends on the model, and on whether you already own another Mac. If you're not sure of the model, enter the serial number on this page. Then find the model on this page to see what OS version was originally installed.
1. You don't own another Mac.
If the machine shipped with OS X 10.4 or 10.5, you need a boxed and shrink-wrapped retail Snow Leopard (OS X 10.6) installation disc from the Apple Store or a reputable reseller — not from eBay or anything of the kind. If the machine has less than 1 GB of memory, you'll need to add more in order to install 10.6. Preferably, install as much memory as it can take, according to the technical specifications.
If the machine shipped with OS X 10.6, you need the installation media that came with it: gray installation discs, or a USB flash drive for some MacBook Air models. For early MBA models, you may need a USB optical drive or Remote Disc. You should have received the media from the previous owner, but if you didn't, order replacements from Apple. A retail disc, or the gray discs from another model, will not work.
To boot from an optical disc or a flash drive, insert it, then reboot and hold down the C key at the startup chime. Release the key when you see the gray Apple logo on the screen.
If the machine shipped with OS X 10.7 or later, you don't need media. It should boot into Internet Recovery mode when you hold down the key combination option-command-R at the startup chime. Release the keys when you see a spinning globe.
2. You do own another Mac.
If you already own another Mac that was upgraded in the App Store to the version of OS X that you want to install, and if the new Mac is compatible with it, then you can install it. Use Recovery Disk Assistant to create a bootable USB device and boot the new Mac from it by holding down the C key at the startup chime. Alternatively, if you have a Time Machine backup of OS X 10.7.3 or later on an external hard drive (not a Time Capsule or other network device), you can boot from that by holding down the option key and selecting it from the row of icons that appears. Note that if your other Mac was never upgraded in the App Store, you can't use this method.
Once booted in Recovery, launch Disk Utility and select the icon of the internal drive — not any of the volume icons nested beneath it. In the Partition tab, select the default options: a GUID partition table with one data volume in Mac OS Extended (Journaled) format. This operation will permanently remove all existing data on the drive.
After partitioning, quit Disk Utility and run the OS X Installer. You will need the Apple ID and password that you used to upgrade. When the installation is done, the system will automatically reboot into the Setup Assistant, which will prompt you to transfer the data from another Mac, its backups, or from a Windows computer. If you have any data to transfer, this is usually the best time to do it.
Then run Software Update and install all available system updates from Apple. To upgrade to a major version of OS X newer than 10.6, get it from the Mac App Store. Note that you can't keep an upgraded version that was installed by the previous owner. He or she can't legally transfer it to you, and without the Apple ID you won't be able to update it in Software Update or reinstall, if that becomes necessary. The same goes for any App Store products that the previous owner installed — you have to repurchase them.
If the previous owner "accepted" the bundled iLife applications (iPhoto, iMovie, and Garage Band) in the App Store so that he or she could update them, then they're linked to that Apple ID and you won't be able to download them without buying them. Reportedly, Apple customer service has sometimes issued redemption codes for these apps to second owners who asked.
If the previous owner didn't deauthorize the computer in the iTunes Store under his Apple ID, you wont be able to authorize it immediately under your ID. In that case, you'll either have to wait up to 90 days or contact iTunes Support.

How can we remove the following zeros from quantity field ?

Hi All.
how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
eg:getting output zqty = 2.000
but i need           zqty = 2.
help me to reslove this issue.
Regards.
jay

Hi,
While populating the field catlog do the following thing to   avoid zeros.
wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
wa_fieldcat-fieldname = 'FWAER'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Thanks,
Khushbu.

How do I remove credit card info from iTunes Store account?

How do I remove credit card information from my iTunes account?

On your computer's iTunes you should be able to edit your payment info by going into the Store > View Account menu option and logging into your account, and on your account's details page there should be a payment link. If you are doing it on an iOS device (iPad, iPhone or iPod Touch) then you could try tapping on your id in Settings > Store (Settings > iTunes & App Store on iOS 6+) and selecting 'View Apple ID' on the popup - that should also give you a payments link on your account's page.
Changing payment info : http://support.apple.com/kb/HT1918

How do I remove credit card information from iTunes account?

How do I remove credit card information from iTunes account?

If you have an unpaid balance or payment due, you can't select None as your payment type.
To see which order you need to pay for, view your purchase history.
When you sign in to the store, you may see a message that there was a billing issue with your last order.
Click the Billing Info button to see the order.

How do I remove my own copyright from a photo

Similar Messages

Maybe you are looking for