How do I remove network printer references in Advanced Type?

Maybe somebody else can help me figure this out.
I installed Canon network printer drives, first "UFRII" Drivers, but then PS (which I believe is PostScript), those are the ones I actually needed for the network I am on.
The first one was a 98mb install, the second was only 21mb. I have a solid state drive and don't feel like wasting 100mb, so I tried to delete the drivers. Both were installed from .pkg files downloaded from the Canon website - they're legit and all. I found no uninstall option, and after some research, found out in fact none exists. WTH? But that's an aside.
I followed the various online directions and deleted the CANON folder in Library/Printers, as well as the stuff in /Resouces, and even the Color Profiles and LaunchAgents.
Yet, when I went to reinstall the printers with the new drivers, I still see the old "Types" listed in Settings > Print & Scan > Advanced (found the tab with the customize trick) and after it does a quick "searching...," I see them listed under "Type:"
If there are references to the printers then it is clear I did not catch everything, please let me know how to wipe these out.
I have time machine backups, short of doing a full restore (not even sure how), what are my options? I tried restoring just the Library/Printers folder, no luck on that alone.
Thanks!

The file(s) you are looking for are most likely in /usr/libexec/cups/backend/. Use extreme caution when removing files from that directdory. You could really mess up your entire system.
I would strongly urge you to contact Canon for a proper removal tool. Without a proper uninstaller, you almost certianly will not remove all that the installer left behind. A proper uninstaller will remove the files and the receipts for the installers that normally get placed in /private/var/db/receipts. Again, use extreme caution in messing with file in that directory unless you know what you are doing.

Similar Messages

How do I remove a printer from my MacBook Pro?

How do I remove a printer from my MacBook Pro?

Open Print & Scan preferences. Select the installed printer in the list. Click on the Delete [-] button below the list.

Can anyone tell me how to install a network printer driver without having the network printer online?

Can anyone tell me how to install a network printer driver without having the network printer online? It doesn't matter what manufactors make the network printers. Is a netwaork printer(with network card) has to have that printer on line to be able to install
the driver? This is the point of my question!
I've ask a same type of question previously, but I can't either get good answer nor reply on the response.

DP
The computer (and driver) have to handshake with the printer, QED it has to be either online or physically connected and if it is physically connected it wont work on the network so yes it does.
Wanikiya and Dyami--Team Zigzag

How to install a network print on solaris 10

How to install a network print on solaris 10?
Thank You!

Thank you Zettabyte!!
Folks, network printers should NOT BE configured like this:
lpadmin -p somequeue -s someprinter
that creates a remote style queue and puts all the I/O and processing capability on the basic LPD listener present on network printer interfaces. This will cause problems down the road, not to mention that you cannot control access, get any logging, filter content, or control banner pages.
Network printers should use any software (or PPD file) supplied by the vendor over the basic lpadmin/netstandard config.
You can install CUPS, but Oracle won't support it until it's part of the OS (S11, apparently).
The "System Administration Guide: Solaris Printing" is highly recommended for those administering printers on Solaris.

How do I remove the print head in a PIXMA MX922 printer so I can clean or replace it?

How do I remove the print head in a PIXMA MX922 printer so I can clean or replace it? The printer clean and deep clean features will not provide print quality corrections.

Hi Happy,
To remove the ink tanks and print head from the printer, please follow the steps located here. Please note that we do not recommend cleaning the print head using any other methods other than the ones built into the printer, as it may do damage to the printer. If performing at least one cleaning and two deep cleanings on the printer do not resolve the issue, the printer may require servicing; please call or email us at one of the methods on the Contact Us page to obtain your servicing options.
Did this answer your question? Please click the Accept as Solution button so that others may find the answer as well.

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

I have a macbook pro with OSX 10.9.3 and Safari 7.0.4. How do I remove BING FROM SEARCHING when i type something into the search bar

See below if the search engine setting was changed without your knowledge and you can't change it back.
You installed the "Genieo/InstallMac" rootkit. The product is a fraud, and the developer knowingly distributes an uninstaller that doesn't work. I suggest the tedious procedure below to disable Genieo. This procedure may leave a few small files behind, but it will permanently deactivate the rootkit (as long as you never reinstall it.)
Malware is constantly changing to get around the defenses against it. The instructions in this comment are valid as of now, as far as I know. They won't necessarily be valid in the future. Anyone finding this comment a few days or more after it was posted should look for more recent discussions or start a new one.
Back up all data. You must know how to restore from a backup even if the system becomes unbootable. If you don't know how to do that, or if you don't have any backups, stop here and ask for guidance.
Step 1
In the Applications folder, there may (or may not) be an application named "Genieo". Genieo may be partially installed even if this item is absent. If it's present, select it and open the Finder Info window. If it shows that theVersion is less than 2.0, download and install the current version from the genieo.com website. This may seem paradoxical, since the goal is to remove it, but you'll be saving yourself some trouble as well as the risk of putting the system in an unusable state.
There should be another application in the same folder named "Uninstall Genieo". After updating Genieo, if necessary, launch "Uninstall Genieo" and follow the prompts to remove the "newspaper-style home page." Restart the computer.
This step does not completely inactivate Genieo.
Step 2
Don't take this step unless you completed Step 1, including the restart, without any error messages. If you didn't find the Genieo application, or if you couldn't complete Step 1 for any reason, stop here and ask for instructions.
Triple-click anywhere in the line below on this page to select it:
/Library/Frameworks/GenieoExtra.framework
Right-click or control-click the line and select
Services ▹ Reveal in Finder (or just Reveal)
from the contextual menu.
If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder should open with an item named "GenieoExtra.framework" selected. Move that item to the Trash. You'll be prompted for your administrator password.
Move each of these items to the Trash in the same way:
/Library/LaunchAgents/com.genieo.completer.update.plist
/Library/LaunchAgents/com.genieo.engine.plist
/Library/LaunchAgents/com.genieoinnovation.macextension.plist
/Library/LaunchDaemons/com.genieoinnovation.macextension.client.plist
/Library/PrivilegedHelperTools/com.genieoinnovation.macextension.client
/usr/lib/libgenkit.dylib/usr/lib/libgenkitsa.dylib
/usr/lib/libimckit.dylib
/usr/lib/libimckitsa.dylib~/Library/Application Support/com.genieoinnovation.Installer~/Library/LaunchAgents/com.genieo.completer.download.plist
~/Library/LaunchAgents/com.genieo.completer.update.plist
If there are other items with a name that includes "Genieo" or "genieo" alongside any of those listed above, move them as well. There's no need to restart after each one. Some of these items will be absent, in which case you'll get a message that the file can't be found. Skip that item and go on to the next one.
Restart and empty the Trash. Don't try to empty the Trash until you have restarted.
Step 3
From the Safari menu bar, select
Safari ▹ Preferences... ▹ Extensions
Uninstall any extensions you don't know you need, including ones called "Genieo" or "Omnibar," and any that have the word "Spigot" or "InstallMac" in the description. If in doubt, uninstall all extensions. Do the equivalent for the Firefox and Chrome browsers, if you use either of those.
Your web browser(s) should now be working, and you should be able to reset the home page and search engine. If not, stop here and post your results.
Make sure you don't repeat the mistake that led you to install this software. Chances are you got it from an Internet cesspit such as "Softonic" or "CNET Download." Never visit either of those sites again. You might also have downloaded it from an ad in a page on some other site. The ad has a large green button labeled "Download" or "Download Now" in white letters. The button is designed to confuse people who intend to download something else on the same page. If youever download a file that isn't obviously what you expected, delete it immediately.
You may be wondering why you didn't get a warning from Gatekeeper about installing software from an unknown developer, as you should have. The reason is that the Genieo developer has a codesigning certificate issued by Apple, which causes Gatekeeper to give the installer a pass. Apple could revoke the certificate, but as of this writing, has not done so, even though it's aware of the problem. This failure of oversight is inexcusable and has compromised both Gatekeeper and the Developer ID program. You can't rely on Gatekeeper alone to protect you from harmful software.
Finally, be forewarned that when Genieo is mentioned on this site, the perpetrator of the scam sometimes shows up under the name "Genieo support." He will tell you to run the provided uninstaller. As he knows and intends, the uninstaller does not completely remove the malware.

How to setup a network printer via http

I have a router with a USB printer attached to it. It looks like this:
Printer status: Ready
Printer location: http://192.168.2.1:1631/printers/My_Printer
In Windows you setup a network printer and the printers address is the http address above. How do you add this type of printer in the printer setup utility on Mac OSX 10.4.11 and 10.5.x?

For OS X 10.5, you use the following settings
As mentioned by bdaqua, open Print & Fax and click the IP icon and then select IPP from the top drop menu. Then in the Address field just enter the IP address; don't enter the leading 'http://' and don't enter the :631 (the mere fact that you have selected the IPP protocol means that it will communicate on port 631)
Then in the queue field you can enter printers/My_Printer, although some router perform a translation for the shared printer so you only need to enter the shared printer name in the queue field.
As for the name and location fields, these are just free text for the local user and have no bearing on the queue details.
And as for 10.4 I have no idea or way to test this at home. But if you use a mix of mine and bdaqua's information you should be okay.

Photosmart 8230. How do you Remove the print heads for cleaning?

Hi guys, I have a Photosmart 8230. After a few lines of printing the black ink fades to almost nothing, all the colours are perfect. There are no error messages. I have done the self cleaning and alignment procedures and wasted a lot of expensive ink. The test page comes out with streaks on the black only. It has been suggested that I take the print head out and immerse it in hot water as a last resort. The question is, how do I remove the printhead? or should I use it as a sea anchor!!
This question was solved.
View Solution.

I just did this to a HP Photosmart 8250 which is in the 8000 series range. I assume they are similar. I was an appliance repair man and have done a lot of other tings in my life, so I decided to take a shot at repairing my 8250 rather than junk it. For 3 Years it was great, only one paper jam, and fast great photos, so I didn't want to give up on it. HP will not repair printers for us, I think because it is too labor intensive, and they can sell a new one for what it would cost.
I actually fixed my HP Photostat 8250. Its working but the color printing is not as good as it was, yet, but I am hoping that will improve as all of the colored inks work their way through the system.
Taking one of these apart and putting it back together is like a Chinese puzzle, so its appropriate that they are made in China. Most of the parts inside can be easily damaged if you are not careful. The covers have very clever ideas to their design and how they snap in place. Take your time with the covers and use small tools.
Getting it back in working condition is another matter. There is a 6 circuit pump and more than a few feet of tubing. I had the side covers off while I tested it and this pump seems to work in both directions. This pump is inside the left side cover. There is another motor with a timing wheel of some kind that stops and starts in both directions at the same time the printhead carriage is whipping back and forth printing. There are other motors also. These things are ingenious. It is surprising that I bought it for less than $100 on sale. It looks like a $1000 piece of equipment inside.
It would probably be a good idea to not remove the left side cover, but if you do, be very careful around the clear timing wheel. it looks delicate. Below is from an email I sent to a friend and I am revising it to make sense. Remember this is something that really requires training to do this, but I see people today that have the guts to tackle all sorts of projects, so for what its worth, and you asked.
Under the right side cover is a motherboard, with a bunch of cables plugged into it, small, larger and even ribbon cables. I found it necessary to remove the motherboard. I had a bit of experience working on Canon printers and I would also suggest you take digital pictures as you go so you can view them on your PC. I am also going through this because I don't like being told we can get anything repaired correctly today, its ridiculous that these printers have become just more throwaways. If you want to do this, as a guide, I must have spent 8 to 10 hours doing this, but now I could do it again in 2, that is the learning process.
Once you get the top off the printer, you will see the printhead carriage. The carriage will be to the right side. The printhead is retained by two screws at the front, (take pictures) a spring clip at the rear and two screws that hold a plastic cover over the six ink hoses that plug into the printhead, its a manifold strip affair. You have to unplug the manifold to remove the printhead, but now I am not 100% sure its necessary to remove the printhead? The ink gunk you will see after you move the printhead to the left is no doubt most of the problem.
Probably after the hot water treatment as described below, the built in printhead cleaner will be able to resume cleaning the printhead, after the hot water cleans the gunk from IT.
I removed the printhead like I say below, but first do this. Under the printhead there is a little carriage with a patch of foam rubber that cleans the print head nozzles.This little device works back and forth while cleaning, but while it is parked, with the printer off, it is forward and you won't be able to move the printhead. Use a flashlight to be sure and you will see how to push the cleaner carriage to the rear and then move the printhead carriage to the left. THEN, you will see the gunky ink mess that has accumulated. This gunky mess I think is the main problem. There are also some felt pads below the cleaning device to absorb some of the ink gunk. I don't know how the HP techs do this, but I used the hot water method below, I had nothing to lose. I would move the printhead first and then you can decide about removing it. I would make sure not to get any of the electronics wet and why I removed the motherboard and why I say take photos. Its hard enough to remember where the different screws alone go, when you are doing this. It can be done, mine is working, even if not perfectly, YET. You need to be very careful with your fingers, because it is hard to find space to hold onto the printer and whay it might be a good idea to not remove the left side.
They are so complicated, its just a matter of time before they get gunked up with ink and the printhead begins floating in the mess. I had nothing to lose so I removed the printhead, carefully, taped up all the hoses so they didn't dry out, Then I removed the motherboard to keep it from getting wet, THEN I held the messy ink end under the HOT water in the laundry tub and flushed out enough ink to dye a bathtub full of water. The hot water worked well. Then I let it all dry out. There are some delicate procedures to all of this and it takes time. I think that is why its very hard to find anyone to fix them. Its labor intensive and probably why HP won't repair them. The print section is the problem, and why I won't buy an All in One printer, Fax, and Scanner. I do buy the extended warranty's now. If you tackle this, take your time, take photos, and good luck. By the way, the 8250 uses O2 print cartridges, is that the type of printer you have, but a lot of this applies to other printers and other brands, and I bet I am not the only one to do this. Before I started this the diagonstics showed no problems, so I assumed it was the the ink aspect of the printer, and not an electronic of mechanical problem. I hope this helps.
----- Original Message -----

How do i remove "network" from Mac Name Devices?

Im currently setting up an apple network to work with my Active Directory and so far so good. I have Active Directory authenticating users and open directory restricting access to features. In Finder i have been able to create a policy to remove the objects from the side panel e.g shared, places and devices. My problem is i am unable to remove "network" from clicking "mac name". The reason for me doing this is because it opens a massive security hole in my network. When i map/mount a windows directory e.g The users home directory, it then displays every share on that server apart from the hidden shares when you go to network>servername. Its not possible to hide all the shares because they are needed by windows e.g Netlogon and SYSVOL. So my question is how can i remove or can i remove Network
Thanks

But they can also be accessed by Windows, also when they are NOT visible. So just by hiding the folder, you don't add any security. If it had to be accessed there is always a way to without seeing the symbol. Set up ACL permissions for the shares so users can only access data they are authorized to.

HT3771 How to deploy a network printer that is hosted on Win 2008r2 server along with custom preset profile?

How would I go about deploying a network printer (Sharp MX-2600N) to Mac OS X machines that would include a custom printer preset profile (Embedded Printer User Authentication Code)?
I am newbie when it comes to mac os x scripting and terminal command line.
Environment
Printer- Sharp MX-2600N
This printer is controlled by 'User Authentication' code that we have to configure on the printer presets.
Mac OS X Machines - Are joined to 2003/2008r2 mixed active directory environment.
Mac OS Versions - 10.7/10.8

How would I go about deploying a network printer (Sharp MX-2600N) to Mac OS X machines that would include a custom printer preset profile (Embedded Printer User Authentication Code)?
I am newbie when it comes to mac os x scripting and terminal command line.
Environment
Printer- Sharp MX-2600N
This printer is controlled by 'User Authentication' code that we have to configure on the printer presets.
Mac OS X Machines - Are joined to 2003/2008r2 mixed active directory environment.
Mac OS Versions - 10.7/10.8

How To Setup a Network Printer

I have a network printer server which connected a Canon PIXMA iP2200 linkjet. The printer works well under windows with http protocol. When I try to setup this printer under Arch, I installed CUPS, ghostscript and gsfonts via pacman and I installed iP2200 filter from aur. I managed to added the printer from the CUPS local web interface and printed a test page successfully, but I can't print any other documents, What's wrong with it?

Well I am trying to paste a piece of Error log here:
E [18/Jan/2010:09:17:48 +0800] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [18/Jan/2010:09:19:36 +0800] Returning IPP client-error-document-format-not-supported for Send-Document (ipp://localhost:631/printers/ip1600) from localhost
E [18/Jan/2010:09:38:01 +0800] [Job 8] 打印文件不被接受 (server-error-device-error)！
E [18/Jan/2010:09:38:01 +0800] [Job 8] Job aborted due to backend errors; please consult the error_log file for details.
D [18/Jan/2010:09:38:01 +0800] [Job 8] The following messages were recorded from 09时37分53秒 to 09时38分01秒
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5227 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5227 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 1158 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 1158 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 6322 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 6322 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5220 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5220 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 6745 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 6745 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5256 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5256 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 9 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 9 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5184 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5184 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 7154 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 7154 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5430 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5430 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 1898 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 1898 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 1357 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 1357 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5252 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5252 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 7500 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 7500 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 4661 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 4661 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 6359 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 6359 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 4808 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 4808 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 4860 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 4860 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 4594 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 4594 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 1089 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 1089 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 7329 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 7329 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 2755 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 2755 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5412 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5412 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 1241 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 1241 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5334 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5334 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 7777 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 7777 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5959 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5959 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5126 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5126 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5473 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5473 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5153 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5153 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 5140 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 5140 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8192 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 7498 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 7498 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 8 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 8 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Read 14 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Wrote 14 bytes of print data...
D [18/Jan/2010:09:38:01 +0800] [Job 8] 1 files to send in job...
D [18/Jan/2010:09:38:01 +0800] [Job 8] STATE: +connecting-to-device
D [18/Jan/2010:09:38:01 +0800] [Job 8] Connecting to 192.168.1.1:631
D [18/Jan/2010:09:38:01 +0800] [Job 8] 正在连接到打印机…
D [18/Jan/2010:09:38:01 +0800] [Job 8] STATE: -connecting-to-device
D [18/Jan/2010:09:38:01 +0800] [Job 8] 已连接到打印机…
D [18/Jan/2010:09:38:01 +0800] [Job 8] Connected to 192.168.1.1:631 (IPv4)...
D [18/Jan/2010:09:38:01 +0800] [Job 8] Getting supported attributes...
D [18/Jan/2010:09:38:01 +0800] [Job 8] document-format-supported (1 values)
D [18/Jan/2010:09:38:01 +0800] [Job 8] [0] = "application/octet-stream"
D [18/Jan/2010:09:38:01 +0800] [Job 8] printer-uri = "http://192.168.1.1:631/printers/iP1600"
D [18/Jan/2010:09:38:01 +0800] [Job 8] requesting-user-name = "ashes"
D [18/Jan/2010:09:38:01 +0800] [Job 8] job-name = "/tmp/org.chromium.0ZlxDm"
D [18/Jan/2010:09:38:01 +0800] [Job 8] Set job-printer-state-message to "打印文件不被接受 (server-error-device-error)！", current level=ERROR
D [18/Jan/2010:09:38:01 +0800] [Job 8] ATTR: auth-info-required=none
D [18/Jan/2010:09:38:01 +0800] [Job 8] Backend returned status 1 (failed)
D [18/Jan/2010:09:38:01 +0800] [Job 8] End of messages
D [18/Jan/2010:09:38:01 +0800] [Job 8] printer-state=3(idle)
D [18/Jan/2010:09:38:01 +0800] [Job 8] printer-state-message="打印文件不被接受 (server-error-device-error)！"
D [18/Jan/2010:09:38:01 +0800] [Job 8] printer-state-reasons=none
E [18/Jan/2010:09:50:43 +0800] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [18/Jan/2010:09:51:02 +0800] [cups-driverd] Bad driver information file "/usr/share/cups/model/foomatic-db-ppds/Kyocera/ReadMe.htm"!
E [18/Jan/2010:09:55:25 +0800] [cups-driverd] Unable to open driver directory "/usr/lib/cups/driver": No such file or directory
E [18/Jan/2010:09:55:39 +0800] [cups-driverd] Unable to open driver directory "/usr/lib/cups/driver": No such file or directory
E [18/Jan/2010:09:55:45 +0800] [cups-driverd] Unable to open driver directory "/usr/lib/cups/driver": No such file or directory
E [18/Jan/2010:09:55:47 +0800] [cups-driverd] Unable to open driver directory "/usr/lib/cups/driver": No such file or directory
E [18/Jan/2010:09:55:51 +0800] [cups-driverd] Unable to open driver directory "/usr/lib/cups/driver": No such file or directory
E [18/Jan/2010:09:55:56 +0800] [cups-driverd] Unable to open driver directory "/usr/lib/cups/driver": No such file or directory
E [18/Jan/2010:10:26:20 +0800] [Job 9] Aborting job because it has no files.
E [20/Jan/2010:00:19:51 +0800] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
E [21/Jan/2010:22:15:17 +0800] Unable to set ACLs on root certificate "/var/run/cups/certs/0" - Operation not supported
Anyone could give me some advice?
Last edited by ashesxera (2010-01-21 14:22:13)

How i can define network printer to report that can use it

hi all
i want to define network printer to the report
and the format of the printer full name and its port ?
another question
when i use the local printer it print but there are web opened and contain uncertain
letters
i want this web to be closed

Hi John
Thanks for replying,
My current setup is this, my non apple router is accessed wirelessly by all my computers, ie imac, mac mini and macbook pro, ipad & iphones for internet.
My printer is in another room so therefore I cannot connect the AEBS (airport extreme base station) with an ethernet cable (I have intially in order to update the firmware and other updates) so in following the attached guidelines are you saying that I have to have the AEBS connected with the ethernet cable to the router?
I was hoping to wirelessly connect.
The wish is that all my devices can print wirelessly
What has happened though is that I can access the AEBS wirelessly, but it has disabled me from my router so I cannot connect to the internet neither to that network
Any other advice
Thanks
Regards

How can i remove auto voice , every time i type is taking HELP

How can i desative auto voice every time i type this computer is taking lol i need help i want to turn it off

Hold the Command key and tap F5

How do I remove Epson Printer Software Update 2.15.1?

I have two Epson Perfection 1670 Scanners. Epson Printer Software Update 2.15.1 installed today on my new MBP, and both scanners immediately stopped working. A hard reboot does not solve the problem. I had the same trouble on two other Macs running OS X 10.7 after similar software updates. The scanners still work on computers without the software updates, and on computers [including a G4 iMac] with earlier versions of OS X.
The symptom is this: I try to import a scan from Preview, and the scanner light starts, but the motor stalls at the start of a scan, and I receive the message 'Scanner is warming up', and then nothing more happens. If I try re-starting the scan, I have a message telling me that the scanner reported an error.
How can the software update be removed, and the previous software be restored? Will Time Machine do it? If so, then what needs changing, please?

I was told by Epson:
If you have a Time Machine setup and a restore point saved for your computer that is earlier than the day you performed the update, Time Machine should take care of the problem. It is meant to restore your computer to the way it was at the time of the restore point. If you have any more detailed questions about time machine, I would suggest contacting Apple support.
Another option is to install an older version of the ICA driver. If you would rather do this, reply to this message and let us know so that and we can have the file uploaded and then send you a link to download it.
I opted for the second solution (the previous ICA driver) and they sent "ICA v530". This too didn't work.
What DID work was manually replacing the current driver (version 5.6) with a version of the driver from my other computer. . . this computer had version 5.11 of the driver.
To find the driver:
go to Library -> Image Capture -> Devices. Go to file name EPSON Scanner. THIS is the driver.
"Get Info" will tell you what version you have.
What is interesting/odd is that all my computers are updated by Apple's "Software Update". Yet only one computer (attched to the scanner via USB), had the problematic driver version 5.6.
Hope this helps.

How to properly remove "Network" from Windows Explorer and Save Dialog boxes?

I've recently rolled out Windows 7 and noticed that in some applications (Office 2003 - yes we are due for an upgrade - happening later this year), when a user clicks the down arrow in a "Save As" dialog box to view the available locations - a
list of seemingly every computer in the broadcast domain is generated and displayed. This takes about 30-45 seconds. I don't want my users to be able to view a list of every computer in their broadcast domain, and I especially don't want them to
be presented with said list every time they try to save something. In newer apps, the list is not automatically displayed but is still accessible by clicking the "Network" selection.
What is the proper way to remove this?
I've tried the following:
1) Disabling the NetBios over TCPIP service - works but prevents other things from working properly.
2) Disabling the Computer Browser service - does not work.
3) Changing HKEY_CLASSES_ROOT\CLSID\{F02C1A0D-BE21-4350-88B0-7367FC96EF3C}\ShellFolder\Attributes from b0040064 to b0940064 as suggested here -http://www.sevenforums.com/tutorials/39699-network-add-remove-navigation-pane.html
. This seems to work but I cannot find anything that says this is supported by Microsoft and I am wary of what side effects may occur.
4) Using a GPO to enable the "No Computers Near Me in Network locations" and "No Entire Network in Network locations." - no change.
It seems like there should a simple way to do this as I can't be the only admin that doesn't want their users browsing a list of every computer on the network.
Thanks!

Hi,
I will mark my first reply as answer. It could help other communities here who have the same issue.
Thanks for your understanding.
Regards,
Leo Huang
TechNet Subscriber Support
in forum. If you have any feedback on our support, please contact
[email protected]
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread.

How do I remove network printer references in Advanced Type?

Similar Messages

Maybe you are looking for