How do I remove old web site when publishing new site with same URL in iweb? Hit replace when publishing new iweb site (so we could have control over changes) but new site name is attached to old via a / after our www address we want to keep.
I hit the replace when publishing the new iweb site (so we could have control over changes - last one was not an apple based site) but new site name is attached to old via a forward slash and underscore after our www address. Makes it very messy with a very long web address. Original address now followed by iweb site name followed by name of first page? Went for iweb as not that computer literate - all going so well?! Cheers for help in anticipation. Have to get off to work now but be great end to week if we could be sorted tonight. Rupes
Well yes of course, if you try and publish through iWeb there won't be an option to publish without your site folder which is exactly why I told you to download Cyberduck and use Cyberduck to upload your site to your server having published your site from iWeb to a local folder. That is what you need to do if you don't want your site name to be included in yoru url.
It would have been easier also if you had used Cyberduck initially to connect to your server and delete your old site yourself - at least that way you would have deleted the correct files rather than relying on your hosting service to do it and doing it incorrectly.
Download Cyberduck and then select the publish to a local folder option from iWeb and then use Cyberduck to upload your site to your server, but rather than uploading the whole site folder and separate index file, upload ONLY the contents of your site folder and then your url will be http://www.domain.com/page_name.html.
It really isn't rocket science!
Similar Messages
-
Having issues with my MacBook. Even when the internet is disconnected, apps are still closing and opening on their own. I sometimes do not have control over my cursor.....any suggestions?
There are several possible causes for this issue. Please take each of the following steps that you haven't already tried until it's resolved. Some may not be apply in your case.
1. Follow the instructions in this support article, and also this one, if applicable. A damaged or defective AC adapter could be the cause, even if it's the right kind.
2. Open the Bluetooth preference pane in System Preferences and delete all pointing devices other than the trackpad, if applicable. Disconnect any USB pointing devices. By a "pointing device," I mean a peripheral that moves the cursor, such as a trackpad, mouse, trackball, or graphics tablet. A plain keyboard is not a pointing device.
3. Start up in safe mode and test, preferably without launching any third-party applications. If you don't have the problem in safe mode, but it comes back when you restart as usual, stop here and post your results. Do the same if you can't start in safe mode. If there was no difference in safe mode, go on to the next step.
4. Reset the System Management Controller.
5. If you're using a Bluetooth trackpad, investigate potential sources of interference, including USB 3 devices.
6. A swollen battery in a portable computer can impinge on the trackpad from below and cause erratic behavior. If you have trouble clicking the trackpad, this is likely the reason. The battery must be replaced without delay.
7. Press down all four corners of the trackpad at once and release. If there's any effect, it's likely to be temporary, and the unit needs to be serviced or replaced.
8. There's a report that a (possibly defective) Thunderbolt Ethernet adapter can cause the built-in trackpad of a MacBook to behave erratically. If you're using such an adapter, disconnect it and test.
9. There's also a report of erratic cursor movements caused by an external display that was connected but not turned on.
10. If none of the above applies, or if you have another reason to think that your computer is being remotely controlled, remove it from the network by turning off Wi-Fi (or your Wi-Fi access point), disconnecting from a Bluetooth network link, and unplugging the Ethernet cable or USB modem, whichever is applicable. If the cursor movements stop at once, you should suspect an intrusion.
11. Make a "Genius" appointment at an Apple Store to have the machine and/or external trackpad tested. -
How do you remove a web site from popular list?
How do you remove a web site from popular list?
luckyfromhialeah wrote:
How do you remove a web site from popular list?
If you mean from the Safari menubar item "Popular"
Choose "Show All Bookmarks" from the Bookmark menu in the main menubar, or click the icon for that in Safari's menubar -
The page that opens should show a list of Bookmarks. In the Left column, click the item under Collections named Bookmarks Bar.
In the new view, locate the folder named Popular and click the reveal triagle to the left of its name - it will open and reveal all the items listed in Popular.
Find the one you want to remove, click it once to select it, then press the Delete key on the keyboard. -
How do you remove a web address from compatibility view option using a script?
How do you remove a web address from compatibility view option in IE using a script or a GPO?
Not seeing any options.
Casey
This topic first appeared in the Spiceworks Communityluckyfromhialeah wrote:
How do you remove a web site from popular list?
If you mean from the Safari menubar item "Popular"
Choose "Show All Bookmarks" from the Bookmark menu in the main menubar, or click the icon for that in Safari's menubar -
The page that opens should show a list of Bookmarks. In the Left column, click the item under Collections named Bookmarks Bar.
In the new view, locate the folder named Popular and click the reveal triagle to the left of its name - it will open and reveal all the items listed in Popular.
Find the one you want to remove, click it once to select it, then press the Delete key on the keyboard. -
In Preview, how do I remove the web address header and foot?
In Preview, how do I remove the web address header and foot?
Thank you
PeterIf you are referring to the preview of a webpage that you printed then in Safari in the Print dialog box is a tick box labelled 'Print headers and footers', if you untick this then they will not be included in the printout and also not included in the PDF version viewed in Preview.
PS. You have to have 'show details' enabled in the Print Dialog to see the above option. -
How do I copy music from an old iPod? Why do you have to make things so difficult? These are my files that I paid for but once I put them on your devices, I no longer have control over them. I've wasted so much time on these stupid problems. I used to be able to do this until you "improved" things.
Thanks, Deggie. I thought Apple would see my feedback. I would just like to know if there is a simple way to copy just a few music files from an old iPod. I saw instructions on how to copy all of them from the iPod but it was complicated and I really didn't want to copy all the songs. I guess I could delete all the songs but the ones I want to copy then go through that process again. Do you know how to back up music to my computer? I don't want to have to go through this again and possibly lose music.
-
How do I remove the web link from text
I have a text string on a sticky note that is formatted as a web link.
How can I remove the web link so the string becomes ordinary text?
Thanks,
-JoeIn Stickies, ⌃click (or right-click) the link. From the contextual menu, choose Remove Link. Alternatively, choose Edit Link…, then click the Remove Link button, or delete the URL.
-
How can I print a web page to a hard copy with Adobe?
How can I print a web page to a hard copy with Adobe? When I print this particular page in the usual way it prints only the text of that page, not the photo that's also part of that page.
I have Adobe SendNow, but I can buy another Adobe product if it will solve my web page printing problem.
-
How do you change a device's name in the sound setting? For example, Let's say I want to change " logo headset" to "log microphone." I need to do this in order for Rosetta Stone to recognize my USB Logitech headset. I'm extremely confused. Please, just help.
It is very difficult to offer troubleshooting suggestions when the "os version" you are using is unknown as each os has their own troubleshooting solutions.
You can also post in your installed os section of the message board. -
Does anyone know how to permanently remove a device that is trying to pair with my computer? I don't know what this device is or where it came from. I just want it gone. This is the name of the device ArbAx6h2P6.
If it's a bluetooth device:
Bluetooth: How to delete a paired device:
http://support.apple.com/kb/ta27116 -
Good day!! I was having two Iphones with same icloud id, later i deleted 1 id from one device, and made 2nd id for this device but same time my old id is stored on other device and i can not change it with another id, can any1 guide me on this issue.
Log in to icloud.com on a web browser and remove the device from "Find My iPhone"
-
Hello there - how can I share my iTunes library between two users on the same computer? I put the library in a shared folder between both and have selected this library on both as well, but when I update iTunes with music etc it only appears on one?
Thank you Joe - I tried this but it's only showing a teensy amount of music - the stuff on the second users account as opposed to the giagntic library on the 'main' account. I actually went to a Genius Bar and they said that apple doesn't really want you to share music between accounts - parents don't want to hear their kids music etc. Which seemed strange, but it might be the case sadly Thanks anyway!
-
How can recipients submit a distributed form via email to any email address they want?
First, a little background to describe our situation:
I have a standard Acrobat form here that I need about 20 of my salespeople to use to send to their new prospective customers, have the customers fill it out, and return the completed form to their respective salesperson.
I don't want to allow my salespeople or their customers to be able to save local copies of the form because it will include personal information about the customer. If customers were to save their completed forms and email them to our salespeople, I worry that the salespeople will accidentally send out one of those completed forms to a new customer thinking that it is a clean/unfilled version of the form (and not realizing that it includes sensitive information about another customer!)
Thus, I need a way for our customers to fill and return the forms without being able to save them locally as their own versions and then sending those new versions to our salespeople.
I believe that means that I should use the "distributed forms" method and ask the customers to "submit" the forms directly rather than save/email them on their own.
I'd like to have a single form up on our website, and our salespeople will just send out the link to that form so that customers can fill out their data and submit it. If our salespeople get into the habit of just sending out the link, and they get an email with the completed form after a customer completes it, then they'll never email around actual PDF copies of the form, so they'll avoid the risk of accidentally sending out a customer's completed form that has all their personal info on it.
Here's the problem though:
Using the "distributed form" method, whenever a form is submitted by a prospective customer, it seems that it can only be submitted/sent to the email address on the Adobe account that originally created the form (which is me), but I need the completed form to be sent directly to the salesperson who covers that customer (not me).
So, is there some way to get around this issue?
Can I create a form field that allows the customer to type in the salesperson's email address so that the completed PDF of the form is sent to that salesperson when they submit it (rather than all of them being sent to me)?This would be ideal because it would still be a distributed form that allows people to submit their forms directly to their salespersons without having to save local versions of the form w/ all their personal info and then emailing to the salesperson.
If this can't work, is there some way to make sure that when a customer fills out a form that they are required to save it as a new version under a new file name (like "NormalFileName_CustomerLastName")?If the file name is always different than the original, clean copy of the form, then it would make it less likely that my salespeople would send out the wrong version.
I know this issue must come up with people all the time! Any help would be greatly appreciated!You would have to first change the email address that Acrobat uses (Edit > Preferences > Identity > Email Address) and then redistribute the form in Acrobat and send it to your users.
-
We need the Request Restart ability when scheduling a single reoccurring job in Redwood. Most of our jobs are scheduled in CHAINs which offers the Final Status Handler on Step level, and the schedule is "paused" when a job in the CHAIN has failed ( the next instance does not populate until the OP MSG has been Replied to) , and once the OPERATOR message is replied to, the CHAIN can resume running again ( desired ) . But we need this same ability when scheduling a single job not in a CHAIN. In our testing, we set up a job with Request Restart chosen on the Error , Killed and Unknown selections on the Restart Behavior Tab. But we found when a job is scheduled say once a day at 8AM, and when it fails, an OPERATOR msg appears allowing a Restart choice ( desired), but the next day's schedule also populates ( undesired) and we do NOT want the schedule to continue on yet because we need a chance to fix the error before the next insance runs for business reasons. So how can you get the schedule of a single reoccurring job with Restart ability in Redwood to pause when it has failed...?
Hello Fran,
You can wrap the job chain in a master job chain in the first step and set the final status handler there.
You can also set the Restart Behavior to 'Stop Submit Frame', in that case you will have to resubmit the job once you are finished troubleshooting.
Regards Gerben -
My old computer crashed and I am trying to download Adobe X Pro on my computer. I have tried to download and the only download I can find is the Adobe XI Pro. Any help would be appreciated. I have the product key but it's not deactivated on my old computer.
if you need to deactivate, contact adobe support
https://helpx.adobe.com/contact.html
Downloads available:
Suites and Programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
Acrobat: XI, X | 9,8 | 9 standard
Premiere Elements: 13 |12 | 11, 10 | 9, 8, 7
Photoshop Elements: 13 |12 | 11, 10 | 9,8,7
Lightroom: 5.6| 5 | 4 | 3
Captivate: 8 | 7 | 6 | 5
Contribute: CS5 | CS4, CS3
Download and installation help for Adobe links
Download and installation help for Prodesigntools links are listed on most linked pages. They are critical; especially steps 1, 2 and 3. If you click a link that does not have those steps listed, open a second window using the Lightroom 3 link to see those 'Important Instructions'.
window using the Lightroom 3 link to see those 'Important Instructions'.
Maybe you are looking for
-
Hello, i am using CUCM 10 and configured CDr last month as epr guide.. but as now i am checking CDR details for any user it is showing no details.. how can correct it so that it will show full and final call details..?
-
Is it a bug of Swing? (help!!!)
meet problem of abnormal table blinking. The scenario is like this, For Table 1, there is a backgroup thread which receive message and update table's model and then call table1.updateUI(); table1.validate(); directly to let JTalbe fresh. (update in n
-
hi friends can any one pls send me notes on bw record mode and with clear steps ...how does it works ...and things like that ....sorry my mail id is [email protected] thanking you all in advance, kavita
-
CS4 - Master won't display in first page
Hi, I have a file that I did not originally make. I have opened this file, imported masters from a template file (that I have made) and applied said masters to all pages in the document. My problem is the first page. The master won't display. I have
-
Move effect causes image to be on top
I have a bunch of Image objects that I animate using mx.effects.Move. Once the images stop moving however I would like for a label that is added to a downstream child container to show on top of the Image. Can anyone suggest how I might achieve this?