How do I remove sound from video in Final Cut Express?

How do i get the sound off the video.

You can unlink the audio and video in the timeline (click the small chain link icon in the top right of the timeline) and delete the video or audio track. Is this what you meant?

Similar Messages

How do you import music from itunes to Final Cut Express 4?

I tried dragging and dropping the file from itunes to Final Cut Express, but that doesn't work, so I tried to import a file using the "import file" and that didn't work either. Then I found the original file using finder, and dragged it into Final Cut Express, which did put the file there, and I can hear the audio in the sample player, but when I try to play it in the sequence, this weird beeping happens. Any help?

jpaulholl wrote:
Then I found the original file using finder, and dragged it into Final Cut Express, which did put the file there, and I can hear the audio in the sample player, but when I try to play it in the sequence, this weird beeping happens.
The beeping is relating to audio you have placed into your sequence that doesn't match your sequence settings, therefore needing to be rendered.
Here is an article for iTunes to FCE http://docs.info.apple.com/article.html?artnum=93165 and here http://docs.info.apple.com/article.html?artnum=93463 that should aid with addressing your current audio woes.
Enjoy.

How do I remove sound from videos in PS CS6 extended?

I have a series of movies which I intended to individually import into PhotoShop CS6 Extended, add end credits, and then export WITHOUT SOUND. For the life of me, I can't see any way to remove the audio from the movies! I'm sure this feature was easily available in the PS CS6 beta version. Any clues?

I have the same problem as Ham. I can't see the context menu for sound.
I saw that context menu in the video that Sudarshan mentioned, but it's not in my Photoshop CS6, where - like Ham experienced - i only see a context menu for Motion.
Just as Ham, i do see the sound context menu at the beginning of my work. I even got to clips in a project where one clip offers sound editing, the other doesn't.
Clips where sound can be edited appear as a blue bar. Clips where sound cannot be edit appear as a violet bar. Even if i add an MP3, it appears as a violet bar, so sound cannot be edited while motion editing is offered. I also tried to dampen the sound via the opacity control in the layer panel, but it didn't work.
I already created a complicated project out of 6 clips. I can't restart now to edit audio before anything else.
Is there any way to get audio editing (in the limited way that's part of Photoshop CS6 sometimes) in ALL clips within a project?
Thanks!

How Do I Edit iPhone 4 video in Final Cut Express

Every time I import video shot from my iPhone 4 I need to render it out once I place it on my time line. How do I get it to render realtime? I have loaded every sequence present and it doesn't work.
What time line settings should I be using?

Well at least I am not alone. Same result.
Which MB Pro? Specs?
I was thinking the playing of a QT file is the problem. I think FC has to convert on the fly. It's native format is DV isn't it?
The open timeline may take a bit more horsepower. I have a 7200 rpm internal drive so that's not the issue.
I can play it in the viewer slug though. They drop right into iMove and play fine.
May be iPhone video needs to be run through Compressor or QT Pro for a conversion? That's too bad if true.

Iam trying to import a short video in final cut express and I'm getting this error... File Error: 1 file(s) recognized, 0 access denied, 1 unknown. How do I solve this problem? The video is on my desktop it's an mpg.

Iam trying to import a short video in final cut express and I'm getting this error... File Error: 1 file(s) recognized. 0 access denied, 1 unknown. How do I solve this problem? The video is on my desktop and it's an mpg file. Please help me

Get a copy of MPEG Streamclip and convert your MPG file to QuickTime/Apple Intermediate Codec (AIC). In FCE, select one of the setups that uses AIC that best matches your clip (say, 1920x1080i60). Create a new sequence, then import the converted file.
Note that if your MPG file is actually MPEG2 you will also need the QuickTime MPEG2 Component in addition to MPEG Streamclip.
What was the source of the MPG file? How about if you open it in QuickTime, then do Window > Show Movie Inspector. Tell us what it says for codec/compression, frame size & frame rate.

I'm trying to make "Stop motion videos" in Final Cut EXPRESS by using 100's of still photos and setting them to music. They are coming out blurry if viewed larger than 4x6 in size

I'm trying to make "Stop motion videos" in Final Cut EXPRESS by using 100's of still photos and setting them to music. They are coming out blurry if viewed larger than 4x6 in size.
I don't understand why this is happening.

Quick follow up, since I was on my phone earlier and am back to a real keyboard.
To access Easy Setup, hit Control Q.
If you click on the blue discosure triangles, a dropdown menu with about a dozen different presets will be displayed. Select the one you want, (Here, I've selected 720P.)
Whatever you select for a preset will not be applied until you make a new sequence. (I don't like to have sequences with different properties in the same project so I prefer to make a new project if I change the Easy Setup.)
Because photo aspect ratios are different than video, I typically put a solid generator of some compatible color on the first track (v1) and put my photos on the track above (v2). Looks better, IMO, than black bars. There are other creative ways to display them. And of course, you could scale them up to fill the frame…but then you probably would have to re-position them.
Good luck.
Russ

How can I find serial number for upgraded Final Cut Express?

On my old G4 laptop, I had upgraded from Final Cut Express to Final Cut Express HD. Just bought a Mac Mini and installed FCE HD, but it's asking me for the serial number from the original Final Cut Express from which I upgraded. Duh. Of course I don't have that any more.
Does anyone know if this might still be found on my hard drive somewhere? Thanks.

Probably not. But just in case, fire up FCE on your old G4 laptop, then do +About Final Cut Express+ and look at the serial number below your name. It's probably the serial number of your FCE-HD Upgrade but there's an off chance it may be your original serial number.
Also, if you sold or gave away your original Full version of FCE, and someone else has installed it on their Mac, you are no longer properly licensed on your current system. You have to keep the original, Full version in order to be licensed to use the Upgrade. That's why the Upgrade asks for both serial numbers.
One other thing, only FCE4 is supported on Show Leopard (assuming your MacMini is new, it will have Snow Leopard on it.)

I am not able to injest video to Final Cut Express

Hi I have been using Final Cut Express HD for a while and now I can't capture video to FCE. I have tried uninstalling the software by dumping the App and all other files relating with FCE (Preferences and stuff) I hope I got it all. I had the Fire Wire port checked out and it is good and so is the firewire. I re-enstalled the software from the original disc and after I dumped the software before the Seriel Number plugs in automatially, making me think that maybe I didn't uninstall the software correctly. Well anyways, can you tell me how I could solve this problem. I am using a ibook G4 512k 80g HD running Tiger. Thank you very much for your help
17 Mac OS X (10.4.5)
17" iBook G4 Mac OS X (10.4.5)
Mac OS X (10.4.5)

Have you ever been able to capture using FCE?
Sounds like problems with Quicktime / Upgrading to Tiger. Did you upgrade to Tiger (rather than archive and install, etc?)
Lots of info here if you search. E.g:
http://discussions.apple.com/thread.jspa?threadID=213364&start=0&tstart=0
Try this: http://docs.info.apple.com/article.html?artnum=301852

Uploading Hi8 Videos into Final Cut Express

Hi,
I am having trouble uploading H8 video files into Final Cut Express.
What I have is:
Sony Player SLV-T2000
Canopus didital converter ADVC-100
I have connected the rca cables from the player to the digital recorder and then the firewire cable from the digital converter to the Macbook Pro. Also the digital convertor is set for analogue in.
When I play the Hi8 tape I can see the video in the viewer but it will not capture.
Can someone advice me where I am going wrong.

Hi
May be You find something here (it's not only for iMovie but FCE/P too)
NO CAMERA or A/D-box
Cable
• Are You sure that You are using the FireWire Cable - USB-Cable will not work for miniDV tape Cameras
FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin (or 9-pin) FW one ?
• Test another FW-Cable very often the problem maker.
Camera
• Test Your Camera on another Mac so that DV-in still works OK
• Toggle in iMovie pref. Play-back via Camera (on <-> off some times)
• Some Cameras has a Menu where You must select DV-out to get it to work
• Camera connected to "charger" (mains adaptor) - not just on battery
• Camera set in Playback mode - NOT Recording mode
Does Your Camera work on another Mac ?
Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
This is lethal to the A/D-chip in the Camera = needs an expensive repair.
(Hard to find out - else than import/export to another Mac ceased to work
everything else is OK e.g. recording and playback to TV)
A/D-box
• Is the dip-switches set right ?
• Set to same standard as recorded/editing e.g. NTSC 29.97fps or PAL 25fps
• Try resetting it
Connections
• Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
the Movie project to dedicated external hard disk.
• FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
External device’s (hard disk’s)
• Should be FireWire as USB/USB2 performs badly and so does Airport or Net-work connected ones too.
• MUST BE - Mac OS Extended formatted - UNIX/DOS/FAT32/Mac OS Exchange - DO NOT WORK for video due to 4Gb barrier.
Mac
• Free space on internal (start-up) hard disk ? Please specify the amount of free space.
(Other hard disks don't count)
I go for a minimum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
after material is imported and edited.No Camera or A/D-box
• GarageBands fix - Close iMovie, Open GarageBand, Play some notes, Close GB and iMove can now be OK
• Does Your Mac have a FireWire Port
• White MacBooks - don't
• MacBook-Air - don't
if not then a few Mac’s has a PCM-CIA slot and there are FW-Cards that makes a FW-port this way
else - NO SOLUTION
Only option as I get it is either
• Use another Mac to Capture material (to an external USB2 - Mac OS Extended formatted hard disk - or -
• Change to another Camera that can be used with Your Mac (no there are no miniDV tape Cameras that can)
• If Your Mac-Book has a PCM-CIA Card place - then there are FW-port-Cards and then
You can import via this - but I've not seen this on more modern Macs. My PowerBook G4
has one and this FW-Card-port works greatly.
SoftWare
• Delete iMovie pref. file may help sometimes. I rather start a new account, log into this and have a re-try.
• Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
• FileVault is off ? (hopefully)
• Screen Saver - OFF
• Energy Saver - OFF
Using WHAT versions ? .
• Mac OS - X.5.4 ?
• QuickTime version ? (This is the heart in both iMovie and FinalCut)
• iMovie’08 (7.1.?), 09 or 11 ?
• iMovie HD 6 (6.0.4/3) ?
Other ways to import Your miniDV tape
• Use another Camera. There where tape play-back stations from SONY
but they costed about 2-4 times a normal miniDV Camera.
• If Your Camera works on another Mac. Make an iMovie movie project here and move it
over to Your Mac via an external hard disk.
(HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
(Should be a FireWire one - USB/USB2 performs badly)
from LKN 1935.
Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpful insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
from Karsten.
in addition to Bengt's excellent '9 yards of advice' ..
camera set to 'Play' , not rec/computer/etc.?
camera not on battery, but power-line?
did your Mac 'recognize' this camera before...?
a technical check.
connect camera, on, playback, fw-connected...
click on the Blue Apple, upper left of your screen ..
choose 'About . . / More . .
under Firewire.. what do you read . . ?
More
• FileVault - Secure that it’s turned off
• Network storage - DOESN’T WORK
• Where did You store/capture/import Your project ?
External USB hard disk = Bad Choice / FireWire = Good
If so it has to be Mac OS Extended formatted
----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
mbolander
Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After un-installing Nikon Transfer and doing a reboot, everything worked great.
I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
No Camera or bad import
• USB hard disk
• Network storage
• File Vault is on
jiggaman15dg wrote
if you have adobe cs3 or 4 and have the adobe bridge on close that
or no firewire will work
see if that helps
DJ1249 wrote
The problem was the external backup hard drive that is connected, you need to disconnect the external drive before the mac can see the video camera.
MaryBoog wrote
Maybe your problems is solved in the meantime, but for all others this might help as I had the same problem, also have the Sony HDR-HC7, but the 7e (Europe, PAL). I found this link today and it works perfectly
//support.sony-europe.com/tutorials/dime/videotransfer/vtransfer.aspx site=odw_en_GB&sec=DVH&m=HDR-HC7E
What I exactly did.- put camera in play mode - open guide - choose connection guide - choose comp./printer (where to transfer movie to) - select connection.- i-link (on my camera) but equal to firewire - OK - choose HDV - choose NO for conversion of i.link.
Settings are shown then (VCR HDV/DV.- HDV and i.link-conv..- OFF), press OK, OK, END.
Switch camera off. Connect firewire cable to camera & Mac. Switch camera on, in play/edit mode.
Open i-movie, choose import from camera. On screen below the camera connection is shown.- DV (HDV). Now you can import, automatically or manually.
This worked perfectly for me. Took me 2 days to find out. Could not find any clear thread explaining what I had to do on the camera and the manual was not clear either.
Yours Bengt W

Importing Video Help (Final Cut Express)

I'm trying to import video from my camera to my computer. I am using a cord that connects via my computers USB port. But for some reason it won't recognize that I have a camera connected. How do I make it so it will recognize not only firewire, but USB as well... Thanks

*Maybe I don't have firewire*
*but I had a crazy Idea that maybe someone here would be nice enough to help....*
We have this crazy idea that you might want to tell us what cam you have with what ports, etc.
Instead, you make coy little comments that provide no information other than you have a camera.
If you want some help, why start by providing detailed information.
Starting with WHAT CAMERA DO YOU HAVE?
And why are posting in a Final Cut Pro forum if you have Final Cut Express.

Avchd video to final cut express

I was able to import the video from my Sony high definition hdr-sr11"AVCHD" video to my apple computers desktop. I cannot import the video that is now on my computer to final cut express. I am new to computers and do not have any idea how to do this. I have been playing around for hours but cannot get it to load. I really need to learn how to load the video. My son’s basketball games are starting and I would love to record them. I would appreciate some help more than you will ever know. I’m lost

Load directly from the camera into the computer using FCE. Do not copy the media off the hard drive onto the computer. In FCE use the log and transfer function. Read about it in the manual.

How to convert MTS files for capture in Final Cut Express 4

*PLEASE HELP!!!* While waiting to buy my iMac I saved my Canon Vixia HF200 AVCHD video clips on a PC with backups stored on an external HD. I transferred these to my iMac and they are in .MTS format. I can not open them in either iMovie or Final Cut Express 4. I gather I need to convert the files somehow. What is the best way to do this? _Thank you for your help!_

Here are your options now that you just have the files...
http://discussions.apple.com/message.jspa?messageID=9966355#9966355
http://discussions.apple.com/thread.jspa?threadID=2073767&start=15&tstart=0
As Tom said, next time import directly from the volume rather than copying the .mts files.

Transferring videos into final cut express

Hello! I am new with mac, so...
In order to transfer videos from a HDD camcorder into final cut express or imovie, can I only do it through a fire wire cable? or does a simple usb do?
And, do all HDD camcorders do? I bought a Sony HDR-SR10E but I returned it because I couldn't figure out a way to import stuff....
Does anyone know a camcorder that will definitely do with FCE?
Thank you very much in advance!

As you can see from Zak's list, the only cameras apart from DV and HDV tape cameras that can be used with FCE 4 are those shooting AVCHD.
All other cameras will not work properly as you will have to convert their formats to DV using something like Streamclip.

Capturing Flip Video to Final Cut Express Will not launch Flip Video

I have done this many times before. I am using Final Cut Express and I am plugging my Flip Video camera into my MacBook Pro and the Flip Video software does not launch. It does not seem to be the
Flip Video software that is the problem. I have upgraded the Flip Video software. The prompt I get says Flip Video quit unexpectely. I have no idea what is going on. I get a huge log of computer terms which I do not understand. Any ideas? Wish I knew more.
Here is a screen shot of what I am getting after I attempt to open Flip Video Share Capture etc./Users/Tim/Desktop/Screen shot 2010-08-04 at 11.36.11 PM.png
Message was edited by: dubdroid 1

The problem is with your Flip Video software. It is launching but then crashing - that's what the message means:
The prompt I get says Flip Video quit unexpectely.
"Quit Unexpectedly" is a nice way to say "Crashed".
You could try trash the Flip Software.plist file from the HD/Users/ Your Name / library / preferences folder. (Remember you'll need to reset your User options afterwards.)
*What's the plist file?*
For new users: Every application on your Mac has an accompanying plist file. It records certain User choices. For instance, in your favourite Word Processor it remembers your choice of Default Font, on your Web Browser is remembers things like your choice of Home Page. It even recalls what windows you had open last if your app allows you to pick up from where you left off last. The iPhoto plist file remembers things like the location of the Library, your choice of background colour, whether you are running a Referenced or Managed Library, what preferences you have for autosplitting events and so on. Trashing the plist file forces the app to generate a new one on the next launch, and this restores things to the Factory Defaults. Hence, if you've changed any of these things you'll need to reset them. If you haven't, then no bother. Trashing the plist file is Mac troubleshooting 101.
If that doesn't help you need to contact the makers of the Flip software.
Regards
TD

Capturing video on final cut express

I have connected my sony camera to my macbook computer and opened up final cut express
HD. It shows that my camera is indeed connected. I go up to file and click capture and the capture window opens. I click on capture now and my camera starts up and a black screen appears but nothing happens. When I hit escape, I return to the capture window and my movie is playing in the display window but nothing is being captured. What am i doing wrong?

Well one of the first things you're doing wrong is posting your FCE question in the FCP forum
http://discussions.apple.com/forum.jspa?forumID=936
I don't use FCE, so I'm not sure how its operation differs from FCP in this regard, but my guess is that you have not switched your camera to VTR mode and so what you may be seeing in the capture window is the back of the lens cap.

How do I remove sound from video in Final Cut Express?

Similar Messages

Maybe you are looking for