How do I remove the cover to access the back of my 5c and insert the sim
How do I remove the cover of my 5c in order to access the back of the phone to insert the sim?
You DON'T remove the cover to access and insert the sim card in the the phone.
The sim card tray on an iPhone is either at the top of the phone or on the side of the phone - just look at the top and then use the sim card tool that came with your phone and this will open the sim card tray. You have no need to take the back off your phone whatsoever and has already been pointed out, if you do so, you warranty is voided, as the casing of iPhones are NOT designed to be removed.
Similar Messages
-
When I download movies from iTunes to my NAS drive, I don't get the cover art. It shows up while its downloading, but when it's finish it disappears. If it has an iTunes extra the cover art is there. I tried get info and add the cover art, it never shows. Regardless of how I add it. Funny thing is, if I download the same movie to my external firewire drive, no problem its there. I've called Apple with no success. I've even tried copying the movie with the art from the firewire drive to replace the file on then NAS drive I still loose the movie cover art. I also tried several times to re download it, no luck. Any ideas? I'm out of ideas.
Do you have any videos/movies in the video app?
In iTunes if you right click on the video and select Get Info and go to the Option tap what Media Type is shown? -
please help
Follow these steps to see if it resolves your issue: (from http://support.apple.com/kb/TS4148)
You may also want to contact your carrier for to make sure there isnt a issue with the carrier service.
Update your iPhone to the latest version of iOS.
Toggle Airplane mode On and Off.
Try turning iPhone off and then on again.
Check for a carrier settings update. Tap Settings > General > About. If an update is available, a prompt will appear.
Remove the SIM Card and verify that it is a valid, carrier-manufactured SIM. Also verify that it is not damaged, worn, or modified. Then reinsert it.
Restore the iPhone.
Hope this helps -
How can I set up a guest access point with a Time Capsule and an Airport Extreme? I am using a Telus router with the Time Capsule used as a wireless access point (bridge mode). I don't want the guest access point to have access to my network.
The Guest Network function of the Time Capsule and AirPort Extreme cannot be enabled when the device is in Bridge Mode. Unfortunately, with another router...the Telus...upstream on your network, Bridge Mode is indicated as the correct setting for all other routers on the network.
If you can replace the Telus gateway with a simple modem (that performs no routing functions), you should be able to configure either the Time Capsule or the AirPort Extreme....whichever is connected to the modem....to provide a Guest Network. -
I installed LION on my mac pro 2008 and it's alway's pop with " there was a problem connecting to the server " Time Capsule" .How can i remove this popup. My Time machine is working fine and also rename it with less than 7 karakters. But the popup keeps on coming with the old name.
I have a BT Infinity router plugged into the Time Capsule, not sure where the radio settings are?
They are able to use the network settings of the TC i.e. they can connect to the internet via the wifi through the TC but when they try and connect to the AirPort Disk this is where it is not allowing a connection.
I don;t have the drive shared out at all at the moment, is this necessary? How do I do this if so?
I have attached the screen shots of all the settings.
Thanks again for your help. -
How do I remove old applications from my new Macbook Pro that were part of the data that was migrated over from my older iMac?
ThanksIf the applications were originally drag and drop installations you can simply drag them to the trash and empty. If they were installed by an installer there should be an uninstaller included. If you're not sure you should check with the software developer for instructions. In this case Google can be your friend.
-
Some of the cover art is missing in Music on my iPad2. The albums affected change from time to time . Frustrated. What Is happening? How can I resolve it?
The covers are all there on my PC.Go to Settings>icloud, scroll to bottom of screen and tap Delete Account. Then log in using a different ID.
-
my username and password are saved on my webmail site. How do i remove them so they don't pop up when I go to the site? I use cox.net webmail. Cox tell me it's a firefox issue. So, here I am. Can you help?
Hey anneri
Go to ''tools->options'' and under the ''Security'' tab click on ''Saved passwords''. This will give you a list of sites that you have saved a password for. Just find your site and delete that entry.
There is a lot of useful information in this article about the [https://support.mozilla.com/en-US/kb/make-firefox-remember-usernames-and-passwords?s=password+manager&r=1&as=s Firefox Password Manager]. It should answer any other questions you might have.
You can also remove the cookies from that site to make the site forget you if you've created a remember me cookie.
*Tools > Options > Privacy > Cookies: "Show Cookies"
Hopefully this helps! -
I bought a book on itunes on my pc. I want the book on my ipad. When I plugged in my ipad to sync it moved all my apps to my pc - useless. how do i get my apps back on my ipad and get the book from my computer to my ipad?
Instructions on syncing your iPad can be found here:
http://support.apple.com/kb/PH12311
and in the accompanying documents linked from that page. Syncing your iPad with iTunes copies items, it doesn't move them. The only way apps would be actually removed from your iPad during syncing is if you had iTunes set to remove them on syncing, so check the appropriate settings in iTunes, set the book to sync as well, and then sync the iPad again.
Regards. -
How do I get CS6 intalled on my MacBook Air w/o somewhere to insert the installation cds?
How do I get CS6 intalled on my MacBook Air w/o somewhere to insert the installation cds? My CS6 software is currently installed on two iMacs. I know I will have to remove it from one.
Thank you!Thank you - think I'll pass on that option and just download from Adobe. Thanks for taking the time to reply!
-
When converting word to pdf the cover page of my documet gets page number 1.On the original the numb
When converting word to pdf the cover page of my documet gets page number 1.On the original the number pages start from the second page.How to keep the original format?
Michael's reponse is correct. However, as far as I knew, OFFICE 2007 came with printer metrics turned off, meaning it is not supposed to be sensitive to the printer selection. The setting is buried in the options list for compatibility. If it is turned off and a change in printer does affect the result, it would appear just one more of the many things in OFFICE 2007 that MS messed up. The latest one for me has been helping students with the messed up equation editor when you want to add equation numbers in a "standard" way. One of the MS employees even wrote a workaround macro for that problem.
-
How can I remove this "feature" ?
I always use caps lock key and it's so annoying (I write very fast) ! I'm fed up ! I received a MBA 13" yesterday, but I think I'm going to come back to Windows because of that !
So is there a solution to remove this annoying feature ?
Thank you very muchYes, this is really a deal breaker for me as you say ... I'm forced to write three times slower than I did on Windows 8, that's horrible (I used to type about 110 words/min).
I'm going to return my Mac and I think I'm going to buy an Asus laptop instead ...
What a shame that Apple does not do anything for this to be configured, I have read other forums and I see that I'm not the only one complaining about that ...
How to lose customers so stupidly ...
But thank you for your reply. -
How do I fix my left shift key? Any open windows leave and make the desktop visible.
How do I fix my left shift key? Any open windows leave and make the desktop visible. I have tired to go into system preferences and reset all of the keyboard settings to default but the issue hasn't gone away.
You are not running as administrator, I think, which may be required and the only way to properly work and register. Also check for compatibility mode settings, UAC and DEP, all of which may require to be adjusted for a legacy app like PS CS2 to run properly. Also turn off Aero and switch to a conventional visual theme. The brush issue may be related to that or is a more generic problem with your graphics card and mouse config, but since you didn't provide any info on that, it will be hard for anyone to advise.
Mylenium -
How do I add multiple songs to an existing playlist from the (no longer called) Library? Highlighting multiple songs and clicking the "Add to" button will only add the one with the little arrow, not all the highlighted ones! I am using the "new" iTunes.
For the moment there isn't a way for us end-users to control what is "matched" or "uploaded." That is purely a result of Apple's server-side algorithms.
To re-add multiple songs at once simply highlight all the songs you want to re-add, then right-click (or Control+click) the list and choose "add to iCloud." -
The attached file is work inprogress, with some dummy data sp that I can test it out without having to connect to equipment.
The second tab is the one that I am having the problem with. the output array from the replace element appears to be starting at the index position of 1 rather than 0 but that is ok it is still show that the new data is placed in incrementing element locations. However the main array that I am trying to build that is suppose to take each new calculation and place it in the next index(row) does not ap
pear to be working or at least I am not getting any indication on the inidcator.
Basically what I am attempting to do is is gather some pulses from adevice for a minute, place the results for a calculation, so that it displays then do the same again the next minute, but put these result in the next row and so on until the specifiied time has expired and the loop exits. I need to have all results displayed and keep building the array(display until, the end of the test)Eventually I will have to include a min max section that displays the min and max values calculated, but that should be easy with the min max function.Actually I thought this should have been easy but, I gues I can not see the forest through the trees. Can any one help to slear this up for me.
Attachments:
regulation_tester_7_loops.vi 244 KBI didn't really have time to dig in and understand your program in depth,
but I have a few tips for you that might things a bit easier:
- You use local variables excessively which really complicates things. Try
not to use them and it will make your life easier.
- If you flowchart the design (very similar to a dataflow diagram, keep in
mind!) you want to gather data, calculate a value from that data, store the
calculation in an array, and loop while the time is in a certain range. So
theres really not much need for a sequence as long as you get rid of the
local variables (sequences also complicate things)
- You loop again if timepassed+1 is still less than some constant. Rather
than messing with locals it seems so much easier to use a shiftregister (if
absolutely necessary) or in this case base it upon the number of iterations
of the loop. In this case it looks like "time passed" is the same thing as
the number of loop iterations, but I didn't check closely. There's an i
terminal in your whileloop to read for the number of iterations.
- After having simplified your design by eliminating unnecessary sequence
and local variables, you should be able to draw out the labview diagram.
Don't try to use the "insert into array" vis since theres no need. Each
iteration of your loop calculates a number which goes into the next position
of the array right? Pass your result outside the loop, and enable indexing
on the terminal so Labview automatically generates the array for you. If
your calculation is a function of previous data, then use a shift register
to keep previous values around.
I wish you luck. Post again if you have any questions. Without a more
detailed understanding of your task at hand it's kind of hard to post actual
code suggestions for you.
-joey
"nelsons" wrote in message
news:[email protected]...
> how do I create a 1d array that takes a single calculation and insert
> the result into the first row and then the next calculation the next
> time the loop passes that point and puts the results in thsecond row
> and so on until the loop is exited.
>
> The attached file is work inprogress, with some dummy data sp that I
> can test it out without having to connect to equipment.
> The second tab is the one that I am having the problem with. the
> output array from the replace element appears to be starting at the
> index position of 1 rather than 0 but that is ok it is still show that
> the new data is placed in incrementing element locations. However the
> main array that I am trying to build that is suppose to take each new
> calculation and place it in the next index(row) does not appear to be
> working or at least I am not getting any indication on the inidcator.
>
> Basically what I am attempting to do is is gather some pulses from
> adevice for a minute, place the results for a calculation, so that it
> displays then do the same again the next minute, but put these result
> in the next row and so on until the specifiied time has expired and
> the loop exits. I need to have all results displayed and keep building
> the array(display until, the end of the test)Eventually I will have to
> include a min max section that displays the min and max values
> calculated, but that should be easy with the min max function.Actually
> I thought this should have been easy but, I gues I can not see the
> forest through the trees. Can any one help to slear this up for me.
Maybe you are looking for
-
Hi, I upload two bmp images in se78. I maintained the image name in zreport. Using select qry i fetch the name and i want to diaplay those images one of the column in my alv report. Need Source Code for this. plz assist , Thanks. Edited b
-
Desktop shortcuts to web pages don't have the correct icon, can this be corrected?
I just upgraded from IE to Firefox and it's really working well. The only problem is all the shortcuts to websites on my desktop have the Firefox icon. They had their correct icons under IE how can I get the correct icons back? My computer is running
-
My subscription is still expired (not!) and I can't use ps6. What gives?
My subscription is still expired (not!) and I can't use ps6. What gives? This cloud is getting thinner with each day without my products.
-
Query regarding App V Deployment - (Deploying DriverMSI in App - V)
Hi All, This is my query regarding deployment of a driver MSI using App V. I have tried sequencing "NMap software" which has Kernel driver as service. I have separated the Kernel driver and wrapped in an MSI and tried deploying the Kernel Driver MSI
-
Easy way to scan file directory?
I'd like to be able to dynamically scan my local file directory in order to offer various choices to a user based on the existence of files. Is there any way to do this? If it can only be done in a Projector or locally hosted .SWF that is fine.