How do I remove the fade out/fade in between songs on an album?

I'm trying to listen to an album that consists of only one 45-minute song, but for some reason it is divided into 11 parts on iTunes. During play, each part fades out at the last two seconds and back in in on the next part. The song was meant to be played all at once but this feature practically destroys this possibility. It absolutely ruins the song and it's painful to listen to this way. Is there an option to remove this effect?
I understand there's a way to combine songs from a CD into one song but can I do that straight from my library?

You cannot combine songs after they have been imported. That has to be done while the CD is showing in the import CD window.
Assuming that you have imported this from a CD (and that you still have the CD - {as you are legally obliged to do}), you need to import the CD again. This time, when it shows in the import window, select the tracks you want to join and then select Options on the right of the screen: The Join CD Tracks is on the menu that appears:
Note:
I have only selected songs four through eight, but you can select all of them.
Join CD tracks only appears on that menu when you have selected two or more adjacent songs. (You cannot select non-adjacent tracks.) See the next screenshot.
By the way, if you do not have the Sidebar showing in your iTunes as I do (CTRL+S), then click on the drop-down menu to find the Audio CD (import) window.
Message was edited by: the fiend

Similar Messages

How can I remove the greyed out items in iTunes under the devices media list?

As you can see in the photo below I am slowly collecting greyed out TV episodes in my phones list of synced items. Its like they're pending a synchronisation but never actually do.
Things I have tried:
Turning off synching for individual episodes, shows and "all TV" doesn't remove them.
Syncing them to the device and then removing them, they show as copied to the device as normal but when they're removed the grey "pending sync" reappears.
fully wiping and restoring the device, no change if I restore a backup. I would like to avoid a complete "fresh" start is possible just due to the hassle of resetting apps etc.
Since it seems to be tied to some sort of cache that remembers the items pending synchronisation I would expect there is a way to clear that from the backup/phone/itunes without completely wiping the device and starting again. If not i'll work out if the placeholders are taking up space - which it looks like they might be under the "Other" category, if not then they can just stay.

Hi romeisdead,
Happy Holidays! Here are the instructions to remove the U2 album:
Remove iTunes gift album "Songs of Innocence" from your iTunes music library and purchases - Apple Support
http://support.apple.com/en-us/HT201396
To remove this album:
Go to https://itunes.com/soi-remove.
Click Remove Album to confirm you'd like to remove the album from your account.
Sign in with the Apple ID and password you use to buy from the iTunes Store.
You'll see a confirmation message that the album has been removed from your account.
If you downloaded the songs to iTunes on your Mac or PC or to the Music app on your iPhone, iPad, or iPod touch, you'll need to delete them manually.
Cheers,
- Judy

My 10 year old synced his ipod to my new iphone how do i remove the ipod from my new iphone

My 10 year old synced my new iphone 4s to his ipod how do i remove the ipod out of my phone

What you say doesn't make sense. You can't sync an iPhone to an iPod. Please explain in more detail what is wrong with your iPhone.
If, for example, his apps, music, etc, are now on your phone, you can attach your phone to your computer and re-sync the items you need through iTunes.
Matt

PE 13: What is the best way to cut out an unwanted segment and leave a fade-out/fade-in overlap? Without multi-track overlaps?

I have a long video segment and want to remove unwanted segments and replace them with fade-in/fade-out transitions. I know that I can do this between two separate video tracks by fading out Video 1 and fading in Video 2 and having the two tracks overlap during the transition. Is there an easy way to do this on the same track? The way I've done this before is to cut out the unwanted segment, then move the two segments to separate tracks and overlap them.
To compound the problem, I have a separate audio track for the wireless microphone I'm wearing. I need to pull that into the fade transitions. So that's Video 1 and Audio 1 with Narration, all cut at the same time with overlapping fade-out/fade-in in the fewest steps. Can Premiere Elements 13 handle that?

billsbayou
Add On...I am weighing the merits of applying an audio transition directly below the video transition. Considering Crossfade's Constant Gain or Constant Power with a forced alignment of Between Clips. According to Adobe documentation
Adobe Premiere Elements Help | Applying transitions to clips
Adobe Premiere Elements includes two audio transitions in the Crossfade category: Constant Power and Constant Gain. Though both provide fades, they differ slightly. Constant Power creates a smoother-sounding fade, while Constant Gain, though mathematically linear, often sounds abrupt.
ATR

How can I remove the pictures in photo stream? I have already turn off my photostream at the settings but when i turn it on again, the pictures still come out?

How can I remove the pictures in photo stream? I have already turn off my photostream at the settings but when i turn it on again, the pictures still come out?

Ok you can reset the stream from www.icloud.com
Goto www.icloud.com
Login with your iCould username and password.
and login
Then click on your name in the top right hand side of the screen next to sign out,
it opens a window Account details with Language, Time Zone, Advanced
Select Advanced - Then click Reset Photo Stream. and confirm, the stream will be reset and totally deleted
I still think you should be able to remove individual pictures though, a blured image etc is a problem

How can i remove the end pice/pin from my headphones out of my computer?

how can i remove the end pice/pin of my headphones out of my computer?

IF you cannot pull it out with your finger tips, you need to take the machine in for service to an Apple Store or AASP. Doing this type of work yourself could seriously damage the computer so it's best left to professionals.

How do I remove the tempature readings on my calendar? They fill up each day crowding out the view of scheduled events for the most part.

How do I remove the tempature readings on my calendar? They fill up each day crowding out the view of scheduled events for the most part.
Thank you
Terry

Disable or remoce the Calendar, that is creating these events, Terry.
To find out, which calendar is creating these events, ctrl-click on one of the events and select "Get Info".
In the Info panel click the color icon in the upper right corner to find out the calendar, that created this event.
Then reveal the "Calendars" Sidebar (press the "Calendars" button in the toolbar) and select the Calendar, ctrl-click it and delete the calendar or disable it.
-- Léonie

I can't make a? with out an E popping up??? How do I remove the E?

I can't make a? with out an E popping up??? How do I remove the E?

This does not sound like a Thunderbird problem. It sounds like a keyboard problem.
Are you saying that you can use that same keyboard in '''any program''' eg: Word etc and you press 'a' key and get an 'a' printed but when you use Thunderbird to compose an email suddenly the 'a' key prints and 'E' ?
I would have expected that this keyboard issue would apply to any program , Notepad, Word, etc.
Check you have the correct language selected for the keyboard.
'Control Panel' > 'Regional & Language Options' > 'Keyboards & Languages' tab

Photosmart 8230. How do you Remove the print heads for cleaning?

Hi guys, I have a Photosmart 8230. After a few lines of printing the black ink fades to almost nothing, all the colours are perfect. There are no error messages. I have done the self cleaning and alignment procedures and wasted a lot of expensive ink. The test page comes out with streaks on the black only. It has been suggested that I take the print head out and immerse it in hot water as a last resort. The question is, how do I remove the printhead? or should I use it as a sea anchor!!
This question was solved.
View Solution.

I just did this to a HP Photosmart 8250 which is in the 8000 series range. I assume they are similar. I was an appliance repair man and have done a lot of other tings in my life, so I decided to take a shot at repairing my 8250 rather than junk it. For 3 Years it was great, only one paper jam, and fast great photos, so I didn't want to give up on it. HP will not repair printers for us, I think because it is too labor intensive, and they can sell a new one for what it would cost.
I actually fixed my HP Photostat 8250. Its working but the color printing is not as good as it was, yet, but I am hoping that will improve as all of the colored inks work their way through the system.
Taking one of these apart and putting it back together is like a Chinese puzzle, so its appropriate that they are made in China. Most of the parts inside can be easily damaged if you are not careful. The covers have very clever ideas to their design and how they snap in place. Take your time with the covers and use small tools.
Getting it back in working condition is another matter. There is a 6 circuit pump and more than a few feet of tubing. I had the side covers off while I tested it and this pump seems to work in both directions. This pump is inside the left side cover. There is another motor with a timing wheel of some kind that stops and starts in both directions at the same time the printhead carriage is whipping back and forth printing. There are other motors also. These things are ingenious. It is surprising that I bought it for less than $100 on sale. It looks like a $1000 piece of equipment inside.
It would probably be a good idea to not remove the left side cover, but if you do, be very careful around the clear timing wheel. it looks delicate. Below is from an email I sent to a friend and I am revising it to make sense. Remember this is something that really requires training to do this, but I see people today that have the guts to tackle all sorts of projects, so for what its worth, and you asked.
Under the right side cover is a motherboard, with a bunch of cables plugged into it, small, larger and even ribbon cables. I found it necessary to remove the motherboard. I had a bit of experience working on Canon printers and I would also suggest you take digital pictures as you go so you can view them on your PC. I am also going through this because I don't like being told we can get anything repaired correctly today, its ridiculous that these printers have become just more throwaways. If you want to do this, as a guide, I must have spent 8 to 10 hours doing this, but now I could do it again in 2, that is the learning process.
Once you get the top off the printer, you will see the printhead carriage. The carriage will be to the right side. The printhead is retained by two screws at the front, (take pictures) a spring clip at the rear and two screws that hold a plastic cover over the six ink hoses that plug into the printhead, its a manifold strip affair. You have to unplug the manifold to remove the printhead, but now I am not 100% sure its necessary to remove the printhead? The ink gunk you will see after you move the printhead to the left is no doubt most of the problem.
Probably after the hot water treatment as described below, the built in printhead cleaner will be able to resume cleaning the printhead, after the hot water cleans the gunk from IT.
I removed the printhead like I say below, but first do this. Under the printhead there is a little carriage with a patch of foam rubber that cleans the print head nozzles.This little device works back and forth while cleaning, but while it is parked, with the printer off, it is forward and you won't be able to move the printhead. Use a flashlight to be sure and you will see how to push the cleaner carriage to the rear and then move the printhead carriage to the left. THEN, you will see the gunky ink mess that has accumulated. This gunky mess I think is the main problem. There are also some felt pads below the cleaning device to absorb some of the ink gunk. I don't know how the HP techs do this, but I used the hot water method below, I had nothing to lose. I would move the printhead first and then you can decide about removing it. I would make sure not to get any of the electronics wet and why I removed the motherboard and why I say take photos. Its hard enough to remember where the different screws alone go, when you are doing this. It can be done, mine is working, even if not perfectly, YET. You need to be very careful with your fingers, because it is hard to find space to hold onto the printer and whay it might be a good idea to not remove the left side.
They are so complicated, its just a matter of time before they get gunked up with ink and the printhead begins floating in the mess. I had nothing to lose so I removed the printhead, carefully, taped up all the hoses so they didn't dry out, Then I removed the motherboard to keep it from getting wet, THEN I held the messy ink end under the HOT water in the laundry tub and flushed out enough ink to dye a bathtub full of water. The hot water worked well. Then I let it all dry out. There are some delicate procedures to all of this and it takes time. I think that is why its very hard to find anyone to fix them. Its labor intensive and probably why HP won't repair them. The print section is the problem, and why I won't buy an All in One printer, Fax, and Scanner. I do buy the extended warranty's now. If you tackle this, take your time, take photos, and good luck. By the way, the 8250 uses O2 print cartridges, is that the type of printer you have, but a lot of this applies to other printers and other brands, and I bet I am not the only one to do this. Before I started this the diagonstics showed no problems, so I assumed it was the the ink aspect of the printer, and not an electronic of mechanical problem. I hope this helps.
----- Original Message -----

How can we remove the commas from the Formula value in SAP BW BEx query

Hi All,
How can we remove the commas from the Formula value in SAP BW BEx query
We are using the formula replacing with characteristic.The characteristic value needs to be display as number with out commas.
Regards
Venkat.

Do you want to remove the commas when you run the query on Bex Web or in RSRT?
Regards

I have lost my phone IMEI Number 012546005322381, Serial Number 87******A4S, is there a way it can be tracked? Also, how can one remove the device from the itunes account

I have lost my phone IMEI Number 012546005322381, Serial Number 87******A4S, is there a way it can be tracked? Also, how can one remove the device from the itunes account
<Serial Number Edited By Host>

If you enabled Find my iPhone then you should use that. If not, I'm afraid you're out of luck for finding it.
To manage your devices, go to Your Account in iTunes.

How do I remove the cover to access the back of my 5c and insert the sim

How do I remove the cover of my 5c in order to access the back of the phone to insert the sim?

You DON'T remove the cover to access and insert the sim card in the the phone.
The sim card tray on an iPhone is either at the top of the phone or on the side of the phone - just look at the top and then use the sim card tool that came with your phone and this will open the sim card tray. You have no need to take the back off your phone whatsoever and has already been pointed out, if you do so, you warranty is voided, as the casing of iPhones are NOT designed to be removed.

How do I remove the previous owner's Apple ID from my 2nd hand iPhone, and replace it with my Apple ID?

How do I remove the previous owner's Apple ID from my 2nd hand iPhone, and replace it with my Apple ID?

settings - appstore - view id - log out and log in with your id.

How do I remove the .08 on my itunes account?

How do I remove the .08 on my itunes account? It's keeping me from using my school district's purchased app codes. Since it's a school ipad there is no pay account linked to it. I am able to use a gift card to redeem but there is a pesky .08 on the account and it's not letting me use app codes given to me by my district. I think the solution is to get a zero balance again so that I have an opportunity to purchase an app using a code. Any suggestions?

Buy stuff.
If you are asking about getting the cash value out, it is not possible. The credit balance can only be used for purchases in the iTunes Store.

How can I remove the moon phases from iCal?

I need to remove ALL the moon phases that appear in iCal 5.0.3. Every time iCloud updates it sends 6 to 10 moon events to my MacBook Pro. Going forward 3 0r 4 months, there are too many moon phases. How can I remove the moon phases from iCal?
I am on a MacBook Pro 2.2 with 4 GB using Mountain Lion 10.7.5.

Try:
items.RemoveAll(s => string.IsNullOrEmpty(s));
Or you can filter them out using where:
var noEmptyStrings = items.Where(s => !string.IsNullOrEmpty(s));
Having fun with custom collections!
Basics of .NET Collections in C#
How does it work in C#? - Part 3 (C# LINQ in detail)
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

How can i remove the shell case from cath kidston?

Hi how can i remove the shell case from cath kidston

Try:
items.RemoveAll(s => string.IsNullOrEmpty(s));
Or you can filter them out using where:
var noEmptyStrings = items.Where(s => !string.IsNullOrEmpty(s));
Having fun with custom collections!
Basics of .NET Collections in C#
How does it work in C#? - Part 3 (C# LINQ in detail)
Mark as answer or vote as helpful if you find it useful | Ammar Zaied [MCP]

How do I remove the fade out/fade in between songs on an album?

Similar Messages

Maybe you are looking for