How do I remove the "Revised" version on a Characteristic ?

Hi All
On a BI Content characteristics we have applies some customisations.  The characteristic was saved and activated.  It is used in a few InfoCubes and as a Reference Characteristic.  This has been transported all the way through to production and is populated etc.  The active customised version of the characteristic is as required.
In development someone has imported some BI Content that has modified the characateristic and the customisations have been removed.  The changes are have a "Revised" & saved status. 
We need to remove the "Revised" version.
Any suggestions ? 
I look forward to getting some solutions
Kindest regards
Karen

Hi Pavan
Thank you for your quick reply
I want to stay with the Active version (i.e. delete all of the changes).  Just to check, I need to do the following -
1. go into change mode
2. in menu "Characteristics", select menu item "Return to Active version"
I hope it is this easy as I have identified a number of InfoObjects that have accidently been updated with BI Content.
Please confirm that these are the correct steps.
Kindest regards
Karen

Similar Messages

  • I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it wont because it tells me I am using a trial version.... How can I remove the trial version?

    I had a trial version of Pages for 30 days and then purchased the actual software without removing the trial. Now when I try to edit documents and save them it sometimes wont because it tells me I am using a trial version.... But sometimes it lets me!! How can I remove the trial version? I cannot tell which one I am using when I open it....

    Question asked and answered quite once a week.
    Go to my iDisk (address below)
    and download :
    For_iWork:iWork '09:uninstall iWork '09.zip
    Run it then reinstall the purchased software.
    Yvan KOENIG (VALLAURIS, France)  vendredi 2 janvier 2011 16:21:41
    iMac 21”5, i7, 2.8 GHz, 4 Gbytes, 1 Tbytes, mac OS X 10.6.8 and 10.7.2
    My iDisk is : <http://public.me.com/koenigyvan>
    Please :
    Search for questions similar to your own
    before submitting them to the community

  • How do I remove the old version of Pages?

    When the new version of Pages arrived the old one never left.  After I reboot or shut down my computer I have 2 versions of Pages in the dock.  It's easy enough to turn off the old version of Pages, but it keeps coming back and I'd like to remove it completely.  Help has been of no help so I need your help to solve this problem.  Thanks SamO66

    Many in the Pages for Mac community regret having deleted the older Pages ’09 v4.3 application as it retains over 100 features/functionality that are missing in Pages v5+. When you read a Pages ’09 document into Pages v5(.2), the latter will filter out any unsupported feature/functionality from the older Pages document.
    I dragged and dropped the explicit Pages.app icons for Pages ’09 (/Application/iWork ’09) and Pages v5(.2) (/Applications) to my Dock. I exclusively use the Pages ’09 application file chooser to open older documents, and a double-click on known newer documents to open them in Pages v5(.2).
    The differentiation between the older and newer documents can be done with different custom tag colors created in the Finders preferences. Then you can search in Finder for the custom tag name (e.g. p4, p5) and see only those specific documents.

  • Remove the HD versions of TV Shows without resetting the entire Library?

    I'm trying to figure out how I can remove the HD versions of TV shows from my laptop without having to have iTunes completely rebuild what it thinks is in my library. Any ideas?
    This is purely because I am running low on disk space. I have the HD versions on a desktop that has a lot more space and don't really need them on the MBP.

    Clicking on it and hitting the delete key, deletes both the HD and SD versions. I want to keep the non-HD version.

  • How do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

    how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

    how do i remove the songs from my iphone used to be easy with old version of itunes just unticked them but cant seem to find it any where on new version

  • I have Iphone 4, version 4.3.3 (8J2) How can i remove the brightness toolbar from the main page, below the applications above the shorcuts?

    I have Iphone 4, version 4.3.3 (8J2) How can i remove the brightness toolbar from the main page, below the applications above the shorcuts?

    There is no brightness toolbar unless your iPhone is jailbroken.  If so, you can try to restore to remove the JB.
    The only place brightness exists is under Settings.

  • How do I remove the pop up on log in We do not support community tool bar on this version of safari?

    How do I remove the pop up message on Safari log in, we do not support this version of community tool bar ?

    Your problem is with the Community Toolbar.
    It's a terrible app/plugin that messes up Macs like the plague.
    Did you ever install a customized toolbar? Like a Facebook one? Or for watching sports?
    Here's how to search and destroy:
    Close Safari.
    Check here for CT Loader
    Locate and delete:
    HD/Library/Application Support/Conduit
    HD/Library/InputManagers/CTLoader
    HD/Library/Receipts/ctloader.pkg
    HD/Library/Receipts/<Toolbar name>.pkg
    HD/Library/Application Support/SIMBL/Plugins/CT2285220.bundle
    HD/Users/<User name>/Library/Application Support/Conduit
    It may not be in every single location, but get it out where ever you find it.
    Restart Safari. Any Better?

  • How do I remove the Trial Watermark from my video in premier after I have purchased the full version

    How do I remove the Trial Watermark from my video in premier after I have purchased the full version

    HaywoodBrandon
    Please excuse if you know this already....
    If you have the tryout version of Premiere Elements (any version) and you export with the Adobe watermark, you cannot remove the Adobe watermark from that export, even after purchase of the program.
    As you found out, you can remove the Adobe watermark from the tryout project file (project.prel) after purchase. The classic way (as you have indicated worked for you) is the deletion of the project.prel's rendered files (preview files) in the purchased program. Some, like myself, have found removal of the watermark placed in the project.prel of the tryout could be achieved just importing the project.prel with its watermark into the purchased version (no rendered file deletion by the user).
    Nonetheless, glad to learn that you are moving forward in your Premiere Elements projects. Wishing you many great projects.
    ATR

  • How do I remove an old version of the Apple Software Updater from a Windows XP machine without a software disk?

    How do I remove an old version of the Apple Software Updater program from a Windows XP SP3 machine
    without an Apple Software disk? I keep getting a message saying that I need such a disk to uninstall
    the old program so I can install Itunes software so I can download apps for my new Iphone 5S.

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get a Code 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Update entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • How do you remove the artwork from being visible in the new version of itunes?

    How do you remove the artwork from being visible in the new version of itunes?

    Easy peasy!
    1. Highlight all the songs you want to remove the artwork from.
    2. Pull down File > Get Info (Apple+I on the keyboard)
    3. Click the checkbox next to the "artwork" panel.
    4. Click OK and the artwork will be removes.
    For individual tracks:
    1. Hightlight the track.
    2. Get Info.
    3. Click the Artwork tab.
    4. Click the artwork, click Delete, click OK.

  • When trying to install itunes on my PC, I get the message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update). Please advise how to proceed.

    Please help with this problem. When trying to install itunes on my HP520 PC, I get the error message (unable to remove the older version of Bonjour as well as the message unable to remove the older version of Apple software update).

    (1) Download the Windows Installer CleanUp utility installer file (msicuu2.exe) from the following Major Geeks page (use one of the links under the "DOWNLOAD LOCATIONS" thingy on the Major Geeks page):
    http://majorgeeks.com/download.php?det=4459
    (2) Doubleclick the msicuu2.exe file and follow the prompts to install the Windows Installer CleanUp utility. (If you're on a Windows Vista or Windows 7 system and you get aCode 800A0046 error message when doubleclicking the msicuu2.exe file, try instead right-clicking on the msicuu2.exe file and selecting "Run as administrator".)
    (3) In your Start menu click All Programs and then click Windows Install Clean Up. The Windows Installer CleanUp utility window appears, listing software that is currently installed on your computer.
    (4) In the list of programs that appears in CleanUp, select any Apple Software Updateentries and click "Remove", as per the following screenshot:
    Next, select any Bonjour entries and click "Remove", as per the following screenshot:
    (5) Quit out of CleanUp, restart the PC and try another iTunes install using an iTunesSetup.exe (or iTunes64Setup.exe) downloaded from the Apple Website:
    http://www.apple.com/itunes/download/
    Does it go through properly this time?

  • How can I remove an older version of iTunes ao I can download 10.3.1?

    How can I remove an older version of iTunes from my PC in order to down load 10.3.1?

    You shouldn't need to.  Just update the iTunes application or download the newest version from here.
    http://www.apple.com/itunes/download/
    B-rock

  • How can I remove the " Source.vi" from long Express VI Names?

    I am in the Moment working on the Development of an Express VI
    library for test purposes.
    How can I remove the " Source.vi" from long Express VI Names?
    This happens when the Express VI is inserted in the blockdiagram
    and listed in LabVIEW and TestStand Palettes.
    By short names like "DAQ-Assistent" or "EasyCalc" the string " Source.vi"
    is not shown at the end of the Express VI names.
    I used The Express VI Dev Toolkit 1.0 to create the Express VIs.
    Labview Version: 7.1 Base
    TestStand: 3.1
    It would be great to get the expert advice from the Forum for this issue!
    Thanks a lot.
    Andre

    I think I understand what you are asking for. If I am wrong, please try to explain it a bit more.
    The name shown may be different than the name of the vi file. To do this, your source VI and popup on its icon. From the short menu that comes up, select VI properties. In the top ring, select Window Appearance. The page that comes up lets you set various things that can affect the appearance of the VI. What you want to change is the window title. Uncheck the Same as VI name checkbox and change the string to whatever you want it to be.
    I hope that this helps,
    Bob
    Bob Young - Test Engineer - Lapsed Certified LabVIEW Developer
    DISTek Integration, Inc. - NI Alliance Member
    mailto:[email protected]

  • How can I remove the blocked contacts from skype h...

    Peace be upon you
    How can I remove the blocked contacts from skype home and all skype features?

    I found this solution and it worked.
    Paul B. Adams
    Re: safari 6.0 flash problem (blocked plug in) 
    Jul 26, 2012 7:39 AM (in response to defconnect5)
    I have a new MacBook Pro and I followed these instructions, downlonading and installing the new Flash plugin. But when I looked in "/Library/Internet Plugins" there was no folder called "Disabled Plugins".
    However, I did see two versions of Flash:
    _Flash Player.plugin with old date
    Flash Player.plugin with todays date
    I deleted _Flash Player.plugin and this fixed the problem.

  • How can I remove the hard drive from an iMac g4 before recycling it?

    How can I remove the hard drive from an iMac g4 before recycling it?

    There are take-apart guides online.  For example
    http://www.xlr8yourmac.com/systems/imac_g4/imacg4_takeapart.html
    However, you can also consider securely erasing the hard drive instead.  You can do this using a Mac OS X installation disc with a version that your iMac G4 can boot from the optical drive.  If this is a viable option, please post back (include Mac OS X version on installation disc).

Maybe you are looking for

  • GOOP and two controls due to lack of space

    Hello All I have to less space on my screen while designing the private data for GOOP class. I tried to use TAB control only as a page selector, but LV says that I can not have another control and I have to delete it. It there any elegant way to have

  • Dynamic Variant -Current date  in selection screen - for batch jobs

    Hi Experts, My report runs in batch job with a variant, daily. One of the filed in selction screen should hv CURRENT DATE, with out providing as input explicitly by user. So, How Can I get it done? Its some thing with Dynamic variants + Selection Var

  • Discovery System for Solution Manager

    I'm looking for an SAP system I can install or access that has the latest Solution Manager code, with sufficent data so that I can perform practical training exercises.  Unfortunately, there's little scope for experimenting with these systems due to

  • Large Premiere CS5 Project not fully loading

    I have a project in Premiere that is relatively large (lots of footage, effects, music, etc.) that will not fully load. The actual 'loading' window does appear, with the loading taking a minute or so. However, when the project finally opens, all clip

  • PSD CS4 - Cursor is off center, help!

    When I am using any tool (Smudge, Brush, Pen, etc.) in PSD CS4 (Mac 10.5.8) my tool is off center. Here is an example: I have a blank white page and a brush tool (200 pixels, 100% hardness) with the color black assigned to it and I click in the cente