How do I remove these "boomy" noises?

Hi, I have just finished recording a guitar tune and noticed that there are some "boomy" noises that I would like to get rid of or at least reduce.
I recorded using 2 x Shure SM57 mics (I know there not ideal for acoustic recording) and recorded into Audition CS6.
Below is a link to the recording, please listen for the boomy noises that I mention and please help me find a way to reduce it.
Thanks
LINK....
http://www.sendspace.com/file/6ro6yg

Late reply here, but using some EQ might help. Try this.
Apply the Parametric Equalizer. Use these settings:
HP, 140Hz, 24dB/Oct
Band 1, 230Hz, -6dB, Q: 5.7
The HP filter attenuates the low frequency energy. A lot of the boominess is there, especially just above 100Hz and below. There are also some harmonics being generated, which are especially noticeable around 230Hz. It may be overkill to reduce that frequency for the entire track, but it helps a lot for the boomy areas - so I think it's worth cutting a bit there as well.
You may want to drop the high frequencies a bit around the 2-4khz region. They are especially noticeable with the above bass cuts.

Similar Messages

When I deleted MobileMe off my mac the MobileMe calendars are still in iCal how do I remove these?

I had a mobile me trial account and when i deleted my account my mobile me callenders remaind in my ical account how do i remove these, and i dont want to remove the events i want to rome the actuall mobile me part from the right side on the grey sidebar.

I would also like to know what to do about this as I am having the exact same problem.
If I upgrade to Lion will it import all the calendars from the iCloud?
or Can i get everything back without having to upgrade?

Using Mac, how do I remove the hiss (noise floor)?

Using Mac, how do I remove the hiss (noise floor)?

Hi! Well, at the most simple, Audition has a noise reduction effect...try Effects/Noise Reduction/Restoration/Noise Reduction (Process). Highlight a short section of your clip featuring just noise, not any sounds you want to keep. Turn the amount of NR down on the sliders to, say, 20% and the Reduction to, say, 10dB, hit "Select Entire File" and Okay it. If the noise is bad, you're best off to do several passes at low processing settings. Turn up the FFT size (on the Advanced menu) and grab a new noise sample between each process. FYI, the reason for doing it 3 or 4 times with small increments is that it results in a lot fewer unpleasant artefacts.
However, as others have said, use of Noise Reduction should be a last ditch option, not a normal part of the process. I have 3 different M Audio interfaces now and none give me enough noise to worry about. As a first guess from your description I wonder if it's your microphone that's noisy and, if so, no amount of playing is likely to fix it...the noise goes up and down along with the programme material as you adjust the levels.
So...a bit more info and maybe we can make some suggestions for you.

I keep seeing a dialogue box asking me to sign in to iTunes accounts that are not my own. How do I remove these other accounts from my phone?

I keep seeing a dialogue box asking me to sign in to iTunes accounts that are not my own. How do I remove these other accounts from my phone?

Try signing out of your iTunes account (scroll to bottom in the app), then sign in again.

For some reason, when my Macbook Pro starts up, all of the MS Office applications open. This was not happening when I first purchased the laptop, and I never added these apps to the startup menu. How do I remove these apps from startup?

For some reason, when my Macbook Pro starts up now, all of the MS Office applications open. This was not happening when I first purchased the laptop, and I never added these apps to the startup menu. How do I remove these apps from startup?

By default Mac apps do not close when you close the window you were working in. Unlike in Windows when you click the top right X icon in any program is closes the window and the program shuts down. On Mac OS X clicking the X in the top left hand corner only closes that windows and leave the program running in the background. If they are left open and you reboot they will restart with the system and load a window for them.

In the upper right hand corner, I continually receive gray pop up boxes asking to accpt/deny websites. How can I remove these completely?

In the upper right hand corner of desktop I continually receive gray boxes with text asking me to accept/deny access to website access. "Do you want to allow connection to www.habbopromor7.blogspot.com". How do I get these removed permanently?

Sounds that you have security software that doesn't trust Firefox and blocks internet access by default, so you need to check that out and make sure that Firefox gets full and unrestricted access to internet.

How can I remove these Warnings?/

Hi all,
I am getting these Warnings in my Report:1)"Field string ZERTAB is not referenced statically in the program".
2)"No read access to field L_DUMMY"
Please help me out in this,How can I remove this warning??
Regards,
Shashank.

Hi Shashank,
Don't worry about these warnings, still you can activate your program and run. There will not be any difference in the your output.
1) "Field string <field1> is not referenced statically in the program", you will get this warning if you declare any variable and you are not using that variable in any part of your program. The solution for this is you can remove that variable if it is unusual or
Sol1: declare the variable like this
         DATA : ZERTAB LIKE (or you can use TYPE) ERTAB.       "#EC *
"#EC * is used to suppress the SAP warning messages
Sol2: declare the variable like this
         SET EXTENDED CHECK OFF.
         DATA : ZERTAB LIKE (or you can use TYPE) ERTAB
         SET EXTENDED CHECK ON.
2) "No read access to field L_DUMMY", for this use "#EC NEEDED in the line of declaration (or) use SET EXTENDED command as above.
Hope this will help you.
Regards,
Venkat.

I have many songs in the Music app but they aren't in iTunes for removal. How do I remove these?

I have many many songs showing in the Music app but they aren't in iTunes. How do I remove them from the Music app or get them to iTunes so I can delete them? Thanks!

I was looking for it too and apparently it's only avalible in the US. Not sure where you live, but this could be the problem. It was for me.

How can I remove these icons?

I have a BR burner I've added to my MAC.
I use a combination of Roxio or Adobe Encore to burn to the BR burner. The discs come out working fine but these leave an icon in my finder and I cannot get rid of them. I've attached a picture.
The icons are the blue folders at the bottom. How do I get rid of those? I cannot, option+click, command+click, right click... nothing I try will give me an option to remove them.
Thanks
Drew

Brilliant... worked like a charm.
Thanks!
-Drew

Uplayermediaplayer-setup.exe keeps prompting me to download and install. It is a virus according to Google. How do you remove these prompts?

My question says it all. In addition, this started to happen yesterday. Initially all I did is download the file. However, before I installed it, I checked with Google about it. When I discovered the file is a virus or malicious malware. So, I never installed it. I have run PC Tuneup Maestro several times now and fixed issues. However, this prompting from uplayermediaplayer-setup.exe keeps coming up on my computer screen. I do not install it. I want to rid my computer of this prompting from this file. I have Norton 360 Internet Security. I have checked my status with N360 too. I do believe via Internet Options on Internet Explorer 8 that I have cleared my computer cache ( I'm not sure if this is the correct procedure for doing clearing the computer cache?). This is a very annoying problem. I've wasted a lot of time trying to rid my computer of this supposed prompting to download and install this file. Earlier this morning, I tried to call in to N360 support, but the representative did not give me direct answers, wasted much time, and really did not give me a feeling of knowledge of this file or how to remove the prompting to download and install it.

Oh, just one more thing, I have the VLC media player on my computer. I am happy with it. It has also been updated to the most recent version 2.1.1 This is also why I questioned why uplayermediaplayer-setup.exe was even coming up on my computer screen in the first place.

I now have message ID and other similar information on my Inbox page alongside my sender and receiver details how can I remove these ?

Obviously I have allowed this information to be detailed by somehow clicking a wrong button but would now like to correct this and have these details removed, any suggestions?

Many thanks Christ1, problem solved !

How do I remove these warnings?

Hello:
I have these clases:
public class CLayoutPanel extends Panel
    static final long serialVersionUID = 42L;
    //Something else...
abstract class CPanelConsult extends CLayoutPanel
    static final long serialVersionUID = 42L;
    public abstract CLayoutPanel CreatePanel();
class ConsItiner extends CPanelConsult
    static final long serialVersionUID = 42L;
    public CLayoutPanel CreatePanel()
        CLayoutPanel DataPanel = new CLayoutPanel();
        return DataPanel;
}    NetBeans [6.0] shows a warning: "Field hides another Field" (referring to serialVersionUID ) in ConsItiner, but not for CPanelConsult, which indeed does have a serialVersionUID field, despite its superclass (CLayoutPanel) also does.
If I remove serialVersionUID from ConsItiner, NetBeans warning goes away, but I get a compiler warning:
warning: [serial] serializable class ConsItiner has no definition of serialVersionUID
Curiously, if I remove serialVersionUID from CPanelConsult, warning goes away for its subclases, but I will get the compiler warning for this class. And I can't use @Override for the field.
1-Is there any way to remove both warnings?
2-Also, why do I get the "Field hides another Field" warning for ConsItiner, but not for CPanelConsult, if both have the base class serialVersionUID?
Thanks!

webmailusr-msn wrote:
NetBeans [6.0] shows a warning: "Field hides another Field" (referring to serialVersionUID ) in ConsItiner, but not for CPanelConsult, which indeed does have a serialVersionUID field, despite its superclass (CLayoutPanel) also does.
If I remove serialVersionUID from ConsItiner, NetBeans warning goes away, but I get a compiler warning:
warning: [serial] serializable class ConsItiner has no definition of serialVersionUID
Curiously, if I remove serialVersionUID from CPanelConsult, warning goes away for its subclases, but I will get the compiler warning for this class. And I can't use @Override for the field.The 'hiding' warning is coming because the fields are not defined as 'private', so they are, indeed, being hidden. Remember, a subclass inherits everything that it can 'see', and all your classes are in the same package (in fact in the same file, by the looks of it).
Winston

I've downloaded something that is allowing Pop Ups. How would I remove these?

Is there a Program to remove Pop Ups?

The instructions mean, from the desktop, so that the Finder is showing at the upper left of the menu bar as the foreground app, you click Go, then move down nearly to the bottom of the drop down menu that displays and choose Go to Folder. Or, since it has an assigned keystroke, you can skip the mouse method of getting there and just press Command+Shift+G.
Be aware that these manual instructions may not help. Apple doesn't exactly keep on top of all of the various types of adware that appears. So the type of adware you installed may not even be part of the removal instructions.

How do I remove these "compare travel rates" and "compare product prices" from my tool bars?

on nevigation toolbar, besides the address bar, i see the two icons 1.copare product prices 2.compare travel rates... i want to remove those..what should i do?

I just noticed another place its still showing at .... which is : c:/ > myname> appdata > roaming > Adobe
and then it shows all these files ....
So is it safe for me to just right click on these and delete all these files ?
Except for the Lightroom folder.

How do you remove the Ambient Noise Reduction option on the built-in microphone in Mountain Lion?

On my old Macbook, I had the option under System Preferences>Input. However, since I've upgraded to a 2012 2.7 i5 iMac, it's no longer there.
The problem lies in the fact that I DON'T want the Ambient Noise Reduction turned on. My recordings in Garageband sound really strange with it. However, it is very obviously being applied to said recordings.
Anyone have any ideas about how to go about solving this?

I'm running OSX 10.8.3 as well. In System Preferences>Sound>Input tab, do you not have the option indicated in the image?

How do I remove these "boomy" noises?

Similar Messages

Maybe you are looking for