How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard.

How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard. (I selected 'Fit to scale' and there's a huge gap on the top and bottom).

Those margins are usually reported from the printer settings to Acrobat. Meansif you have, for example, an inkjet printer and that printer can not print seamlessly, then there will be a minimum margin.
Check your printer's page settings.

Similar Messages

How do I remove background images from a PDF? Using Adobe Acrobat 6.0 Standard.

I have a file I need to print off, but the document is 100 pages lond and each page as a very obnoxious background image that makes it difficult to read the content, and I really don't want to waste the ink.
I have tried a few things with no luck:
-Tried replacing document background color in the 'Accessibility' tab in preferences.
-Tried unchecking the 'Display large images' field in the 'Page Display' tab in preference - this leaves a dark gray background that I can't get rid of, which is almost as bad as the original image.
-Tried several combinations under the 'Color Management' tab in preference to lessen the gray background achieved from the previous step. I can only brighten the shade slighty, but there is still a fair amount of gray background.
I just want a white background, or a clear background, and I have not seen any article or help topic on how to accomplish this. Please help!
Mike

You might want to see if you can select the background with the object touchup tool. If so, can you then just delete the selected object. May take a while to go through the document, but if it solves the problem you are ahead. You may be able to select it with JavaScript and repeat the process. My point of using the object touchup tool is that it may not be a background set by Acrobat, but something that is simply labeled as an image from the Acrobat viewpoint.

Is it Possible to set Top and Bottom Margin for each section?

I've been googling and haven't found an answer to this problem.
I need to specify a different top and bottom margin for each section in my document. The "document margins" apply to the whole document, so I've set those to a low amount, and I can set the Layout Left and right margins - but the "Layout Margins" do not allow "top and bottom" only "before and after". This is a critical difference, because if you have 2 pages in a section, only the first page gets the "before" margin, and only the 2nd page gets the "after" margin. This is a little odd, and I'm frankly surprised we are in version 4 of this app - and you can't set top and bottom margins for each section.
If you insert a "layout break" on each page, then you can get the margins to reset for each page inside a section, but this is not an acceptable workaround as I need to setup templates for staff to use that will "flow" like a normal word processor.
Does any one have any suggestions?

On page 49 in the English Guide version it tells you about Lay-out margins. This is the text
*Defining Layout Margins*
*In a word processing document, a layout margin is the space around columns in a*
layout.
*To change the layout margin in a word processing document:*
*1 Click in a column.*
*2 Click Inspector in the toolbar, click the Layout button, and then click Layout.*
*3 To change the outside margins of the column(s), enter values in the Left and Right*
*fields under Layout Margins.*
*4 To specify the amount of space above and below the column(s), enter values in the*
*Before and After fields under Layout Margins.*
*The new margins can’t extend outside the page margins set for the document in the*
*Document inspector.*
I hope this helps.

Remove left and right margin when display portlets

What is the best way to remove the left and right margin when display portlets?
I found a file called \portalpages\dotnet\prod\src\com\plumtree\portalpages\browsing\myportal\/
MyPortalContentView.cs
But I do not see a place for the left and right margins. What is the correct place to modify these margins? (How about the top and bottom margins too?)
See the green highlight?

That's it yeah, seems to curve upwards at the sides. Dunno whether leaving a heavy book on it might sway it back into position?!
I had the display upgraded when I bought it so presumed it could have been done whilst 'in operation'. Apart from that there's nothing wrong with it really, doubt it's something they would take it back on anyway.

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been dama

I am using Adobe Acrobat 9 Standard version in Windows 8.1 and when I try to create a .pdf file, I receive the following error message "Acrobat could not open "file name.log" because it is either not a supported file type or because the file has been damaged. To create a PDF document, go to the source application then print the document to .pdf" I am going to the source application and printing the document to .pdf yet it's saving the file as a .log file. After reinstalling the software, I initially didn't encounter this problem but on my second and third attempts to convert files to .pdf format, this error message reappeared. How do I resolve this problem?

I have a similar problem which i did not have before...and it exists only in some powerpoint files which i want to print as a pdf file...and i get the same message as above.
the log says the bellow details...what's the problem and how can i resolve it? thanks.
%%[ ProductName: Distiller ]%%
%%[Page: 1]%%
%%[Page: 2]%%
Cambria not found, using Courier.
%%[ Error: invalidfont; OffendingCommand: show ]%%
Stack:
%%[ Flushing: rest of job (to end-of-file) will be ignored ]%%

How to retain numerical order (Of file names) when combining files in Acrobat (9) Standard

How to retain numerical order (Of file names) when combining files in Acrobat (9) Standard, please see the attached screenshot for a clearer explanation.
I understand that if we prefix all files with leading zero's this will probably resolve the issue but I just wondered if anyone new the answer. The ironic situation is that version 6 has no problem.
I have spent over an hour with techincal support who were unable to provide me with an answer

It is not clear how you are trying to do the order. Have you tried to select a set of files and then use the arrow buttons to move them in the list? If you select the heading, that will typically reorder the files by that heading and undo everything you had done before.
You should be able to select groups of files and move them up and down in the list. All of those options appear on your view, so what is the real question?

Can I convert PDF to PPT using adobe acrobat x standard? If so, how?

Can I convert PDF to PPT using adobe acrobat x standard? If so, how?

Hi meganl52100253,
With Acrobat X, you can save to Word and Excel format by choosing File > Save As. But saving to PowerPoint wasn't introduced until Acrobat XI.
You're welcome to try Acrobat if you'd like. You can download a free 30-day trial from http://www.adobe.com/products/acrobat.html.
Best,
Sara

I am at attorney in Floride and am the proud owner of adobe acrobat 7 standard (necesssary in Florida to file legal papers with the courts). My computer went belly up and I am attempting to restore it to its prior state. I cannot get it to activate my p

I am at attorney in Floride and am the proud owner of adobe acrobat 7 standard (necessary in Florida to file legal papers with the courts). My computer went belly up and I am attempting to restore it to its prior state. I cannot get it to activate my product. I realize you have quit supporting acrobat 7, however, I need it. How do I get it activated. I have tried by web and phone (which says you have quit the phone activation). how do I get it activated. I have downloaded the CS2 product from creative cloud to no avail. What do I do? Ida Roberts

Error: Activation Server Unavailable | CS2, Acrobat 7, Audition 3
Mylenium

A4 top and bottom margins too big - Pages 08

I am using the pages 08 in A4 document and the margin setup for the top margin is 0,35cm and bottom margins are 0,85 cm but in the print-out they are 3,5 cm and 4,5 cm. Header and footer are off

Similar problem landscape: two A5 columns on A4. All margins are not the very minimum I arranged for. Left is 6 cm, the other 2 or more cm. This doc printed properly in Pages '06.

How to adjust margins to print with Adobe Acrobat pdf web page?

when I print to PDF with Acrobat or with the printer margins and the information in the top and bottom defaults (URL, page number ...) do not satisfy me. the possibility exists of being able to reset? How? do you have any suggestions?

I would define how to position Title, URL, number of page and date also margin left, right, top and bottom. This element in other browser Mozzilla, Explorer is defined in "Page Preview".
Acrobat don't have possibility to set this parameter..

How do i convert a pdf document to ms word with adobe acrobat x standard?

I purchased adobe acrobat x standard so as to convert pdf documents into ms word and excel. When I try to convert docments it asks me to purchase another adobe product.

The ability to export a PDF file to Word or Excel is part of Acrobat X Std. as detailed in this comparison chart. It sounds like you might actually have Adobe Reader X open instead of Acrobat X Std because Reader has the command File > Save As > Word or Excel Online. This partcular command in Reader links to the ExportPDF online service.

How to replace numbers with text in tax return pdf using Adobe Acrobat X Pro

How do I replace numbers with text in tax return pdf using Adobe Acrobat X Pro? The tax return was created using CCH software. Thanks for your review.

Thanks Bill for your quick reply. CCH software is one of the major
suppliers of tax return software. I found an internal source that helped me
make the changes from numbers to text i.e. "$123,456" to "See Schedule O".
I am not sure if I am working in form or final text. Thanks again! Kelly

How can I use Adobe Acrobat X Standard to print multiple documents on Lexis Nexis File & Serve?

I am unable to print multiple documents on the Lexis Nexis File & Serve legal website that used their Batch Document Processor software. The technicians there told me that Adobe Acrobat X Standard has an incompatibility with their Batch Document Processor software. I never had a problem with Adobe Acrobat 6.0 or Adobe Acrobat 9.0 and the Batch Document Processor program at the Lexis Nexis File & Serve website. I am now running Windows 7 Professional SP1. Before, we were running Windows XP Professional SP3 with the IE 8.0 browser. We now are running the IE 9.0 browser.

The answer is in the question...
Only the Pro version of Acrobat is capable of batch processing files (which
I assume the Lexis Nexis tool uses). Until now you had Acrobat Pro, and now
you have Acrobat Standard, and therefore you can't use it anymore. You need
to upgrade to Acrobat Pro.

Top and bottom margins to be inside the frame and form should less cluster

Hi All,
In my application we have created nearly 10 regions and for each region i have created sub regions with No templates. Here are the deatils below.
I need to display two regions side by side with borders, so what i have done is
1. Created a region as #Region Start with No template with Display point as "Page template body (1. items below region content) and Header and footer i have
given as <table border="1"><tr><td>
2. Followed by region as #What with Wizard region as "Page template body(1. items below region content) and nothing given under header and fotter.
3. Followed by reagion as #Region Middle with No template with Display point as "Page template body (1. items below region content) and Header and footer i
have as </td><td>
4. Followed by region as #where with Wizard region as "Page template body(1. items below region content) and nothing given under header and fotter.
5. Folowed by region as #Region End with No template with Display point as "Page template body (1. items below region content) and Header and footer i have
given as </td></tr><tr><td>
Simiallry followed by rest of regions by creating dummy regions and placing the <tr> and <td> in Header and Footer.
Now users are asking me to have insde the frame and form shoul dbe less cluster.
Can suggestiosn on this who we need to achieve.
Thanks,
Anoo..

'File' > 'Page Setup' is used to alter the page margins when you need to print the email. It is not used to create a Template email nor to change the overall theme used in the Thunderbird user interface.
To add a theme to the overall Thunderbird window, you can choose
* either a Windows theme via Control Panel > Personalization >Theme
* or download a theme Add-on, there is a huge range here: https://addons.mozilla.org/en-US/thunderbird/themes/
such as : https://addons.mozilla.org/en-US/thunderbird/addon/balloons/?src=ss
If you are looking to create a Template email, then you open a new Write message, design the email, enter a Subject so that you can easily locate the email and click on 'File > Save as > Template or click on Save button and choose 'Template' from the options. then the email is saved in the Templates folder. To use, you click on Templates folder and double click on the email to open in a new Write message. then compose and send as normal. The original email will be saved in Templates folder for reuse.

How to open an URL and close the URL window, using adobe javascript

Hi,
Is it possible to open an URL and close the URL back again(without allowing the user to perform any other operation)? I was able to acheive the opening of the URL, using the app.launchURL("address". true); - But here it lauches in new window, and how do i close the window using the javascript. Is it possible?
Thanks.

Hi all
In addition to what Bobby W - Adobe TS added, you might find
the following useful as a bypass or workaround to the pesky prompt.
var pw=window.parent;pw.opener=window.self;window.open("
http://www.adobe.com");
pw.close();
I think this will only work for IE browsers. Actually, I
think the whole window.close() only works for IE, but could be
wrong about that.
Cheers... Rick

How do I remove top and bottom margins when printing using Adobe Acrobat XI Standard.

Similar Messages

Maybe you are looking for