How do i rename video after I burned it?

how do i rename video after I burned it?

Hi
And there are three places to keep name right when making a DVD
• When starting a new iDVD project - Set name right here
• In iDVD under Project Menu (at top) - down to Project info - Set Name right here too
• In iDVD Menu Layout (theme) window - Here too You can name the title (button) to the Movie name or Play Movie or Start or what ever You find suitably.
Yours Bengt W

Similar Messages

HT201401 how to rotate a video after recording on my iphone

how to rotate a video after recording on my iphone?

Import the video with your computer as with any other digital camera and you can use a video viewing/editing app on your computer to rotate the video.
For what purpose?

How to close a video after it plays

Hey people,
Say you have a video intro that you would like to have dissapear after it plays. Use this code. (place in trigger event)
var vid = sym.$("bird_holder");
vid.html('<video width="1022" height="575" id="bird" src="video/Intro_Animation.mp4" controls="controls" type="video/mp4" </video>');
$(document).ready(function(){
       $("#bird").bind('ended', function(){
       sym.getComposition().getStage().getSymbol("intro_animation").deleteSymbol();
A couple things to address:
1) My video is housed in a symbol called "intro_animation" which contains the holder for the video. (called "bird_holder" in my example)
2) If your video is on the main stage, just use sym.getSymbol("holder_name").deleteSymbol(); at the end of your function.
3) be sure to include id="" in your video tag. and make sure your ready function is referencing that id.
Hope this helps someone.
-Dylan

Hi Marco Antonio,
I have similar scenario and would like to apply the first option provided by you.
May I know where is the setting to decrease the PO qty to the total GR qty received?
I have tried but system give me an error message no. 06230.
Please help. thanks
Regards,
Julia

Premiere doesnt play my m2v file and how do i export videos correctly to burn to dvd. also any suggestions on dvd burning software

exactly as i stated above:
i tried exporting my video project via mpeg2-dvd option which put my video in the m2v. file format. the file format is showing blank when i go to put it in any dvd burning software. also when i put the file back into premiere it shows no media but has the entire duration of the video project on it with 3.5 gb. what is going on and can anyone help assist me with this frustrating issue

How do I add video after latest software update

I updated last night took about 2 hours for the new update to recognize
The phone but won't allow me to add to the phone I didn't change any settings it just
Gives me the black circle with a line it didn't yesterday before uPdate

Hi,
You can consider html video tag to do this. You will need to add it in Muse using, Object-insert as html. Detailed instructions can be viewed here
HTML video Tag

How to pull the videos off the burned DVD

I burned all my stuff on a dvd and was wondering if i can get them back off the burned dvd

Hello Derek,
Yes you can but you'll need to download and install MPEG Streamclip, and purchase and install Apple's MPEG Playback Components.
You can then rip the DVD files and save them as Quicktime movies.
Alastair.

How can you edit video after uploading to ovi

Is this a big secret? I have looked on the net but ther doesn't seem to be an answer anyehere. surely Nokia offer this, but where is it?

Can you please provide more information such as
1. what type of device you are using
2. what kind of video editing you are looking for
3.Are you doing a drag and drop of video file to phone
currently in Nokia ovi suite when you transfer a video from PC to phone, based on the phone type connected if the phone doesn't support direct placback of your input video then the video is edited in the background and then copied to the phone.

How do I rename photos after import?

I tried the filenaming template and direct input into metadata. Lightroom displays a message that the file name cannot be renamed_but no explanation is given. What am I missing?

Perhaps (this is a guess) Lightroom does not have write permission for the folder where these photos are located.

How to open a video in a JMF without using its absolute path?

I locking a media file during decryption and I have to pass on the same filestream object to the player to play the video,but so far I have only seem only how to play the video after providing the URL or the path.
I want an alternate method please.

To play a video from a filestream, you'd need to write a custom DataSource that will deliver the file data to JMF... which is going to be a pretty complicated project.

Zoom in video after recording

Can't figure out how to zoom in video after recording

Flash is notorious for not cleaning out the older version as part of an update.
Grab the uninstaller from here:
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-windows.html Uninstall Flash Player | Windows]'''
'''[http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html Uninstall Flash Player | Mac]'''
Then reinstall the latest version.
Shockwave Flash '''v15.0.0.152 http://get.adobe.com/shockwave/'''

How can I avoid video quality loss when burning Canon FS100 footage to DVD?

When I put the footage onto iMovie it looked great, and then I sent it to iDVD to burn onto a disc. After I burned it to a DVD and watched it on my DVD player, I noticed that I lost a lot of the video quality (or at least it seemed). It looks a little fuzzy and seems like it could be much better considering how great it looks in iMovie. Is it just me or does sending it to iDVD make me lose video quality? What is another alternative so I don't lose the quality? I've heard that Wondershare is a good option and that you won't lose any quality burning it from there, is that true? What is my best alternative? A relatively expensive DVD burner? Thanks, any help is appreciated.

A good suggestion was made before me, but I have another twist on the matter.
From Wikipedia on DVD: "Although many resolutions and formats are supported, most consumer DVD Video discs use either 4:3 or anamorphic 16:9 aspect ratio MPEG-2 video, stored at a resolution of 720×480 (NTSC) or 720×576 (PAL) at 29.97, 25, or 23.976 FPS."
Notice that the resolution for a DVD is roughly 700x500, which when multiplied gives you 350,000 pixels per frame. Now compare that with the video resolution of the FS100, which I see on web pages (eg, on dabs.com) is 710,000 pixels per frame.
This means your camera records more quality than can fit on a DVD. Approximately twice as much information. This means half the information is lost during the conversion. That's why you notice a drop in quality. If you burned to a BluRay disk, you'd probably lose nothing, since they store more information per frame. So your alternative is to buy a BluRay burner and play it back on a BluRay drive.
Another alternative is to burn it to a DVD but not in a form that's playable by a DVD, just in a form thats readable and playable by a computer. You will lose no information that way, but it will be playable only in a computer.

After I burn my DVD Video comes up instead of Menu

After I burn my DVD Video comes up instead of Menu. How do I get rid of this?

Go into the Map mode of your iDVD project and make sure there is nothing listed in the Auto Play bin at the left.
If there is drag it out and try again.
Follow this workflow to help assure the best qualty video DVD:
Once you have the project as you want it save it as a disk image via the File ➙ Save as Disk Image menu option. This will separate the encoding process from the burn process.
To check the encoding mount the disk image, launch DVD Player and play it. If it plays OK with DVD Player the encoding is good.
Then burn to disk with Disk Utility or Toast at the slowest speed available (2x-4x) to assure the best burn quality. Always use top quality media: Verbatim, Maxell or Taiyo Yuden DVD-R are the most recommended in these forums.
OT

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

I was trying to make a new screen recording using quicktimeplay, but when I watched the video after recording it all I could hear was me talking while the video was showing on the screen. How do I turn off that recording and turn the right one on? thanks

Hi j2399123,
It sounds like your screen recording is doing what it was designed to do, capture what is happening on your screen, with optional voice over with the microphone.
Screen recording is for recording what you see on the screen, it is not a "video capture" option, like for capturing a movie with sound that is playing on your screen.
For the QuickTime recording options, check out "Recording with QuickTime Player" in
Mac Basics: QuickTime Player creates, plays, edits, and shares video and audio files
http://support.apple.com/kb/ht4024
And for screen recording specifically, there's
QuickTime Player 10.x: Record your computer’s screen
http://support.apple.com/kb/PH5882
Thank you for thinking of Apple Support Communities for your support needs.
Nubz

How do I stop Firefox from playing video after I navigate from the page or leave Firefox?

Simple and annoying. . Extremely frustrating issue with Firefox for Android. ..
I watch a YouTube video or any flash video. . And after I hit play, the ONLY way to stop it is to hit pause or let it play to the end or close the tab. .
It will NOT automatically stop if I open another tab. or if I navigate from Firefox. .
I feel this is a very basic feature. Did I set something up that was wrong?
Can I ask two questions?
I have another extremely annoying and frustrating problem with Firefox for Android.
The "top" (if you pull down the tabs) search bar DOES NOT allow my stock Samsung keyboard to auto space. . Thus instead of typing
"How do I stop Firefox from playing video after I navigate from the page or leave Firefox?"
I'll type in
"HowdoIstopFirefoxfromplayingvideoafterInavigatefromthepageorleaveFirefox?"
Unless I manually got the space bar.
Using a recently factory data reset Samsung Galaxy s4 active.. android 4.2.2 and stock Samsung keyboard ... Firefox 34.0.1
Thanks in advanced.
Ps
I was a hardcore xscope user for years and just recently gave in to Firefox when i lost all my bookmarks due to a forced factory data reset. .

I'm using a different keyboard which works fine in the most top search bar...
I cannot believe that it's not a feature.
What if I was watching a video and wanted to shut it off quickly? I'll have to hit back? Wait for the previous screen to load then hit the power button?
Please tell me that feature ids soon to come

After activating iCloud "video" no longer works on my iPhone and iPad. How can I reactivate "video"?

After activating iCloud, "video" no longer works on my iPhone and iPad. How can I reactivate "video"?

Welcome to the Apple Community lynntice.
Which part of video isn't working, playback or recording, could you please provide a little more information.

How do i rename video after I burned it?

Similar Messages

Maybe you are looking for