How do i render in FInal Cut Express? Every time i click render all the load box pops up for about a second and then disappears :(

how do i render in final cut express? I am a film student and i've been using final cut for 2 years i have never had this problem. i click render all and the load bar comes up for a second and then flashes away, leaving all my shots unrendered? what is this? how do i fix this?:((

Go to menu toolbar and to Sequence>Render All and ensure that all the items you need rendered are checked.
Good luck,
Russ

Similar Messages

Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work.

Whenever I go to preview a song in itunes, the song with play out for about 10 seconds and then stop. Why isn't the song previews working? How can I fix this? I tried updating my itunes and it didn't work. I use windows 7. Thanks!

Try:
- iOS: Not responding or does not turn on
- Also try DFU mode after try recovery mode
How to put iPod touch / iPhone into DFU mode « Karthik's scribblings
- If not successful and you can't fully turn the iOS device fully off, let the battery fully drain. After charging for an least an hour try the above again.
- Try another cable
- Try on another computer
- If still not successful that usually indicates a hardware problem and an appointment at the Genius Bar of an Apple store is in order.
Apple Retail Store - Genius Bar

When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?

When I'm browsing on Safari, it all of a sudden cuts off and the screen turns blue. It turns blue for about 5 seconds and then returns to the desktop screen. Any idea what's going on?

Anna...
Could be the graphics card.
Run the Apple Hardware Test

When I try to open a downloaded PDF file it opens for about 6 seconds and then closes - how can I fix that?

I am using a Dell XPS8500 desktop with 64 bit Windows 7.
No problem downloading PDF files but when I open them they disappear before I can print.

Hello,
Which application are you trying to open the PDF files in? Firefox or Adobe Reader? Or another?
If adobe reader then please make sure that your copy is up to date. You can get the latest version here - http://get.adobe.com/uk/reader/
Also I notice that you are using Firefox 19. Unless you have a particular reason to run an old version of Firefox is it much better to keep updated. The latest version is v22. New security fixes are applied in every new version of Firefox. Without them your PC is vulnerable. Please see this article: [[Update Firefox to the latest version]]

When I connect my iPod to the computer, it connects for only about 5 seconds and then disconnects on its own before synching. How do I fix this?

I had my iTunes and library on my home computer. The computer crapped out along with the hard drive. I have my library on my iPod and want to put it on my new computer, but any time I connect the iPod to my home computer (and work computer for that matter), it only connects for about 5 seconds and then disconnects on its own. I go to look at the iPod as a hard drive and I have nothing but empty folders (contacts, calendar, recordings and something else), but nothing is in them.
1) How do I get my iPod to connect to my computer?
2) How do I get my iPod to connect to iTunes?
3) Why don't my music files on my iPod show up on my computer?
I have uninstalled iTunes and reinstalled iTunes. I have done the "trick" of hitting the 'Menu and Center' buttons at the same time unitl the Apple icon appears. I have tried going into Disk Mode. I don't know what to do now. The word "Resetting" scares me because this is where I have my 150 GB of music stored and I'd rather not have to upload my CD's again.............will resetting affect that? The word "Restore" is even scarier!!!
Help!

i am using a cable connector like this one.. it works with audio when pluged into a stereo but not a TV.i am trying to display video from ipod, also from other apps.. i also want to know why it does not work.
i use the video app on the iPod and video stored on other aps.

How do I open my Final Cut Express 4.0 files in Final Cut Pro 10.1.3?

Hello,
I used Final Cut Pro when I was in college and when I graduated in 2010, I bought Final Cut Express 4.0. I recently bought Final Cut Pro 10.1.3 two days ago and I am having trouble opening up my old Final Cut Express 4.0 files. When I do go to open up these files they only open up with Final Cut Express and I always get the message: file's format is too new for this version of the application.
How do I open these Final Cut Express 4.0 files in Final Cut Pro 10.1.3?
Thank you!
Anna

TThere is no way to go directly from FCE to FCPX. If you know somehow who has FCP7, they can open the FCE projects and export XML files. These can be converted to FCPX XML format using the 7toX utility.

TS1702 Hi I bought Final Cut Pro X to my old macbook but the week later I bought a new bacbook pro and wonder how to download the final cut program to my new mac.I find the item in iTunes, but not in apple store.I find Final c in fins, but iTunes can't d

Hi I bought Final Cut Pro X to my old macbook but the week later I bought a new bacbook pro and wonder how to download the final cut program to my new mac.I find the item in iTunes, but not in apple store.I find Final c in fins, but iTunes can't download

Use the Mac App Store application and go to the purchased tab, which you'll find at the top of the Mac App Store window.

When I turn on or restart my Macbook Pro Retina 15", my entire screen flashes completely bright yellow for a few seconds and then it goes to the normal Welcome screen. How do I fix this??

Hi Everyone,
This problem just started today. When I turn on or restart my Macbook Pro Retina 15" (Mid 2012 version), my screen is light gray like normal, and then after a few seconds my entire screen flashes completely bright yellow for a few seconds, and then it goes to the normal Welcome screen (where I choose to login as myself or a guest user). This suddenly started today and has not stopped since. This keeps happening every single time I turn on or restart my computer.
Yesterday I installed all the Mavericks and other updates that were available in the App Store, so I'm wondering if this is related to that since this never happened prior to my doing those updates yesterday. When I first installed the new OS X Mavericks (10.9.3) update, it went through the whole installation process (took about 10 minutes), and then during the installation I got an error message saying that it couldn't verify my iTunes application that was on my laptop, and then my laptop finished installing the updates. Then once my laptop restarted, the App Store "Updates" section said that I had to do the whole OS X Mavericks (10.9.3) and iTunes (Version 11.2) updates all over again. So my laptop did the whole installation again (took about 10 minutes, but this time I didn't get that "iTunes error message" during the installation process).
Now, when I go to the App Store "Updates" section, it says the following under "Updates Installed in the Last 30 days":
-Digital Camera RAW Compatibility Update (Version 5.05) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-OS X Update (Version 10.9.3) installed May 15, 2014
-iTunes (Version 11.2) installed May 15, 2014
-Security Update 2014-002 (Version 1.0) installed April 22, 2014
I'm wondering if this flashing bright yellow screen upon bootup is related to the fact that my laptop installed the OS X Update and the iTunes Update two times each? Or is this new problem totally unrelated? It's just that this problem started a day after these 2 updates were installed twice.
My Macbook Pro Retina 15" (Mid 2012 version) is otherwise working fine at least as of now. The only issue so far is this flashing bright yellow screen every time I turn on or restart my computer.
If anyone could please help me fix this so that my bootup screen doesn't flash completely bright yellow anymore, I would be forever grateful!
Thank you so much for reading this and for any help you can provide.
hope everyone is well,
Elaine

Hey everyone in Apple world!
I figured out how to fix the flashing yellow screen problem that I've been having on my MBP! Yessssss!!!
I found this super handy website with the golden answer: http://support.apple.com/kb/HT1379
I followed the instructions on this page and here's what I did:
Resetting NVRAM / PRAM
Shut down your Mac.
Locate the following keys on the keyboard: Command (⌘), Option, P, and R. You will need to hold these keys down simultaneously in step 4.
Turn on the computer.
Press and hold the Command-Option-P-R keys before the gray screen appears.
Hold the keys down until the computer restarts and you hear the startup sound for the second time.
Release the keys.
I went through the 6 steps above twice, just to make sure I got rid of whatever stuff was holding up my bootup process. Since I did that, my MBP boots up just like normal. No flashing yellow screen anymore!!
(Note that I arrived at this solution when I first saw this page: http://support.apple.com/kb/TS2570?viewlocale=en_US)
Let me know if this works for you!
Elaine

When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?

Hi all,
I need help with my iphone4s.
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats. Any suggestions on how I can troubleshoot this problem?
What seems to be the problem here?
thanks and regards
Wan

Wanlucg wrote:
When I turn on my iphone4s, the apple logo will show for a few seconds, and it will suddenly fade off to a blank screen, and not start up. It will then restart by itself, and the cycle repeats.
Make sure you have the Current Version of iTunes Installed on your computer
iTunes free download from www.itunes.com/download
Then See Here > http://support.apple.com/kb/HT1808
You may need to try this More than Once... Be sure to Follow ALL the Steps...
Take your time... Pay particular attention to Steps 3 and 4.
After you have Recovered your Device...
Re-Sync your Content or Restore from the most recent Backup...
Restore from Backup > http://support.apple.com/kb/ht1766

I own fully paid for license for Dreamweaver CS6. Every time I click to open the app, I get a very annoying pop-up message. How do I stop it?

I own fully paid for license for a Mac version of Dreamweaver cs6. Every time I click to open the app, and before I can start using CS6, I get a very annoying pop-up message (see screen shot below) that states I have a trial version and do I want to buy into the cloud version, which I don't. How do I stop the pop-up? This message seems to originate from the Extension Manager.
I tried trashing Extension Manager, but another annoying pops-up which states that I have to "reinstall the application manager". Of course, there is no such thing as a "application manager" that I can find. I guess it should be "extension manager".
I no longer own Photoshop because there are so many great alternatives available. Can't wait to do the same with Dreamweaver.
Adobe can't even get the correct cost. I'm an US Customer however they quote the Creative Cloud in Euros. Go figure........

I have faced this problem in the past. In my case, I had Adobe registered under two separate ID. One when a student and the second as a regular employed individual. Because I purchased the licensed while at the University, the registration was listed under the school id. So, when I login in Adobe using my regular ID, I then received the annoying marketing campaign add.
Therefore, review that you have enter the correct id during loging. IT is possible that you login to the community as one ID but purchased the subscription using a separate user name. In these cases, the computer will not know that you already have a paying license.

How is it I have 550 songs on my nano but only 269 show up in itunes...how do I get all 550songs and playlists back into itunes? Also when I click on 'computer' the nano iconn is up for about 5 secs then dissapears and I can't find it...what is going on?

How it it I have 550 songs on my nano but only 269 show up in itunes without playlists? How do I get all 550 songs and playlists back into itunes?
Also when i click on "computer" the nano icon is up for about 5s then goes away and I can't find it...what is going on?

spea105 wrote:
How it it I have 550 songs on my nano but only 269 show up in itunes without playlists? How do I get all 550 songs and playlists back into itunes?
How do you manage your iPod? Do you Sync your entire music library, or only selected playlists?

I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

I have a macbook pro core i7 mid 2012
And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

If you have more than one user account, these instructions must be carried out as an administrator.
Launch the Console application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
Step 1
Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
Step 2
Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

How come now every time i throw something into the recycle bin it asks for my password and when I do it doesn't show in my bin help please!

How come now every time i throw something into the recycle bin it asks for my password and when I do it doesn't show in my bin help please!

You're throwing away files that either don't belong to you or are in a folder that doesn't belong to you. Since your user account has Administrator privileges, it just ask you for authentication, else it would forbid the operation.
To better understand the concept, select one of your files from your home directory and press Control-I. In the info window, check the Sharing & Permissions section at the bottom. Do the same with one of the files that asks for the password.

How do I render in Final Cut Express?

I installed Final Cut Express 4 yesterday. I cannot render anything! When I try to render it says "Warning: Insufficient disk space for render. Please free up space and retry." I have deleted preferences and it still will not render. I have also made room by deleting files but it still will not work! What do I do?

Hi
There are some major differences in how video-editing programs works.
Just to Start and get on with FinalCut is one of them. It doesn't store and keep material as iMovie any version.
So a book on howto can be of Great Value - I used
Diana Weynand
• Final Cut Express, Video Editing for the Digital Enthusiast Apple Pro Training Series
Tom Wolsky
• Final Cut Express 4
And enjoyed especially Tom Wolskys book
Yours Bengt W

How do I export a final cut express movie in both PAL & NTSC formats?

I am wanting to provide both a NTSC and PAL verion of a movie onto a DVD, how can I do this using final cut express?

Ok, I have successfully converted a DV-NTSC video to DV-PAL using Nattress Standards Conversion in FCE. The resulting output file (a self-contained QT movie) verfied as PAL in QuickTime movie inspector, 720x576 at 25fps and it plays perfectly, the video looks great, and the sound is in sync.
I had to figure out a workaround for one step in the documentation (Graeme uses an FCPro feature called 'nest items' that doesn't exist in FCExpress. I got around that by manually creating a second PAL sequence instead - see below).
If you're starting with an NTSC video, the basic procedure I used is this:
1 - create a PAL sequence and place the NTSC clip in that sequence (yes, that's right)
2 - create a second PAL sequence (add the word NEST to the name so you can tell which sequence is which)
3 - nest the first PAL sequence in the second PAL sequence
4 - open the second PAL sequence (the NEST) in the viewer by Control-clicking its timeline and select +Open in Viewer+
5 - apply the G Converter filter to the NEST (which is now open in the Viewer)
6 - click the filters tab in the Viewer so you can see the G Converter filter
7 - drag the +original NTSC clip+ from the Browser to the +Source Clip well+ in the filter
8 - verify that the other G Converter settings are what you need, especially that you have checked "Nested", "High Quality" and "Source is NTSC-DV" and that the convert setting is NTSC->PAL (these are the defaults, but you should verify them anyway)
9 - render the NEST sequence ... +this may take as long or longer than the length in time of your sequence+
10 - export the NEST sequence as a self-contained QT movie ... which will now be a PAL movie
One other note, the Standards Conversion filters need to be copied to the +Library > Application Support > Final Cut Express Support > Plugins+ folder (not the Final Cut Pro Support > Plugins folder as specified in the documentation)
If you are going to try this with your project, I suggest the following:
1 - edit your movie in an NTSC sequence. After completing all your edits (when you are done editing) export it as a +self-contained QT movie+ (it will be an NTSC movie)
2 - re-import the exported NTSC movie back into FCE (it will now be your complete movie as one large clip)
3 - follow the instructions above for using the G Converter filter to create the PAL version of your movie (using the re-imported movie as the only clip you will put in the first PAL sequence, and in the Source Clip well in the converter filter.)
You can use your first export (the self-contained NTSC movie) to create your NTSC DVDs; and the second export (the self-contained PAL movie) to create your PAL DVDs.

How do i render in FInal Cut Express? Every time i click render all the load box pops up for about a second and then disappears :(

Similar Messages

Maybe you are looking for