How do I renew the integrity of a possibly corrupted info.plist?

When I try to install Messenger 6.0.3, I get the following error message:
"The Finder cannot complete the operation because some data in
Info.plist could not be read or written. (Error code -36)."
How do I renew the integrity of the info.plist file (ideally without screwing everything else up)? Or is something else at work here?

welbike wrote:
Is there a solution to this problem?
I don't know. It might help if you told me what the message was, and what was the "failing" message you mentioned earlier?
How is it you are now able to install Messenger? Did you repair the disk? Did you download a new copy?
One thing you can do is to open the Console application, from your Utilities folder, and have console.log in one window and system.log in another. Use the "broom" to clear both windows, then try to start a chat session. When it quits, there will be a message in one or both of the console windows.
Copy and paste what you get from these windows (and say which is which). I need to see the exact message to take this further.

Similar Messages

  • About how many years would the integrated macbook pro w/retina batteries last before they required replacement service?

    About how many years would the integrated macbook pro w/retina batteries last before they required replacement service?

    It is entirely dependent upon how the batteries are used ( with a little bit of luck).  There is no specific time period that any one can provide.
    Here you will find some detailed information on Apple batteries and their care:
    http://www.apple.com/support/macbookpro/batteries_power/
    Ciao.

  • Uploading AIR for IOS thru Application Loader I get the following error - The package does not contain an Info.plist.

    I'm publishing an .fla in AIR for IOS.
    I'm in CC 2014 so first I need to know which AIR should I publish in?
    newest is AIR 14.0.0.178 for IOS
    IOS deployment type is App Store
    publishes with no error.
    I see the following files included .swf and app.xml
    I convert the .ipa to a zip file
    Upload that thru the Application Loader I get the following error
    The package does not contain an Info.plist.
    Where is the infoplist for this and do I convert the .ipa and the info to a zip file?
    I converted the .ipa to a .zip and the intoplist file is NOT THERE  how do I generate this?
    Any help here?

    Ok this is becoming very very frustrating as I have been at this for hours now. So the only way to explain this is to write what I did step by step as I have to be doing something wrong, just to recap:
    I was publishing from Flash CC 2014 using AIR 14.0 and getting Digital Certificate is not valid message.
    Was instructed to download new AIR 17 , I did this installed into Flash and used to publish.
    I used my previous p12, app ID and distribution certificates all generated properly.
    The file worked ONCE but I got an app ID error ( I understood I used the wrong app ID)
    I changed it to the right app ID and the very next time and after 10 attempts I got the same error  Digital Certificate is not valid
    SO I then downloaded AIR 16.0
    RE DID ALL MY CERTIFICATES AND P12'S
    went to publish and I STILL GET THE SAME MESSAGE   Digital Certificate is not valid

  • How do I renew the Adobe DRM license?

    I have downloaded a book from the library but, it will not download from Adobe Digital Editions to my Kobo reader because the DRM license has expired. How do I renew this license?

    The Message on my reader is "This document is protected by Adobe Digital Rights Management (DRM) license which has expired.
    Please renew the document's license and try again.
    I hope you have a solution.
    Thank you.

  • How can I ensure the integrity of my config files?

    I'm designing a system with some powerful features and I would like to make sure that the config files change only through my program. My concern is people running this on any of the Windows systems without a ACL. I was thinking of storing all the config files in Hsqldb and running them as virtual files through my program. This way I can encrypt the data, and enforce it easier through my program's ACL. I was also thinking of running a checksum on the data after any alterations and using this to compare whenever I read the data from there. I realize I can't physically stop someone from deleting the data who's in front of the machine but I'd like to make sure the integrity of my files is solid. I have reasons for designing it this way.

    DW will be much easier to learn if you spend a few days learning the basics first.  HTML and CSS are the ABC's and 123's of web design.  If you don't have a basic understanding of code and web terminology, DW will be an up-hill struggle for you.
    Start here:
    http://w3schools.com/
    Then work your way through this 6-part tutorial.
    Creating  your first web site in DW CS4 -
    http://www.adobe.com/devnet/dreamweaver/articles/first_cs4_website_pt1.html
    Best of luck,
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics | Print | Media  Specialists
    http://alt-web.com/
    http://twitter.com/altweb
    http://alt-web.blogspot.com

  • How does one renew the developer license

    I have been trying to update my windows but failed, so i decided to restore my pc....now most of my applications cant open and say that i must go to window store. when i go to window store it says that "your developer license has expired. to continue
    using this appl please renew your license". i have tried looking but cant find were i'm suppose to renew the license. Please help.
    Thanks.

    The developer license is needed to install and run development packages while writing and testing an app.
    It is not needed for aps downloaded from the store. If you are seeing it there then there is something wrong with your system. Please ask on the Windows 8.1 forum on
    http://answers.microsoft.com for help with system issues.
    --Rob

  • How do I retrieve the last three months of diary info stored on my iPad, it has mysteriously dissappearedplease?

    How do I retrieve the last three months diary stuff as my iPad appears to have wiped the info off please help.

    Check Settings > Mail, Contacts, Calendars > [scroll way down to] Sync Events ...
    Set the time period as you wish.

  • How do I renew the "Fallback SSL Certificate"?

    Last week my server started emailing me about certificates that were due to expire. So I went to Server App, Certificates, and hit show all. There was only one certificate. Double-click, hit the Renew button, done. Easy!
    Trouble is, I have another certificate, called "Fallback SSL Certificate", which somehow doesn't snow up in Server App, and it's expiring too. I can view it in Keychain Access, but there's no renew button there. So can someone tell me how to renew this certificate?
    Thanks!

    Any idea how to fix the certificates if this doesn't fix it?
    I renewed all my certificates in server app and the reminder emails to renew them have continued except now the names have changed and none of the new names (or the fallback certificate for that matter) appear in server app's list

  • How do I verify the integrity of an install DVD?

    Ever since moving to Leopard I have been having strange (and seemingly unique) problems with Adobe CS3 applications as well as random restarts and kernel panics. I presumed that these were the result of a failure of my logic board, but I booted a friend’s MBP (same model) from my machine (in target disk mode) and the problems persisted using his machine as well, which argues against it being a hardware problem (at least an obvious one). Some of the errors seem to have to do with a failure in character encoding (severe garbling of text, warnings from Adobe apps about using non-Roman characters in file names that use only lower-case Roman text, etc.).
    Since the problems started with the move to Leopard (and not with the Adobe CS3 applications) and because they have reappeared despite a clean installation of everything on my machine from source (and even on a separate partition where I installed only Leopard and InDesign, which is why I suspected a hardware problem), I am forced to consider the possibility that something was wrong with my Leopard DVD. When installing, I have allowed it to verify the media prior to running, but I'm wondering if there is any way to verify that everything has installed correctly. If there were some obscure logic-board problem that runs consistently but rarely and affects the installation, I'd like to be able to verify that. On the other hand, if I have a bad installation disk somehow, I'd like to know that as well.
    So, is there some way I can verify that my install DVD is OK and not the source of the problem? Note that whether I leave the bare 10.5.0 install or upgrade to 10.5.1 makes no difference, so whatever problem I am having would have to be on the install media, if it is part of Leopard.
    (For what it's worth, the story of my troubles with CS3 and my reasons for suspecting an encoding problem in the OS can be found here: http://www.adobeforums.com/webx/.3c05ffd3 )

    Pop the DVD in, launch Disk Utility, select the DVD, select Images->Checksum->CRC-32 image checksum. BTW, that should happen when you boot with the DVD. If you didn't make a bootable backup/clone of your Tiger installation, then you failed to follow safe practices as outlined in:
    http://docs.info.apple.com/article.html?artnum=106941
    http://www.macmaps.com/upgradefaq.html
    http://www.macmaps.com/backup.html
    http://www.thexlab.com/faqs/installswupdates.html
    http://www.thexlab.com/faqs/backuprecovery.html
    As for your problems, boot the machine with the disk that contains the Apple Hardware Test suite and run the extended tests to rule out hardware problems. To more extensively check the installed RAM, download Rember and run it.

  • I have an iphone 4s which I recently updated to iOS 7.0.4. Now my contacts no longer show addresses or notes, although the phone numbers are displayed. All the correct information is still in iCloud, but how do I get the Contacts folder to show all info?

    Since I updated to iOS 7.0.4 on my iphone 4S, I can no longer see addresses or notes in my contacts on my phone. The information still exists in iCloud online.  How do I get full contact info onto my phone?
    There is another problem which may be related.  My desktop computer at work is running Windows 7, and I was recently upgraded to Office 2013.  Outlook is not showing contacts on my computer any more, just in iCloud.  However, when in iCloud, it does included addresses and notes, so I don't think this is caused by the same error as the iphone problem,
    I have refreshed, reinstalled and rebooted, to no avail.

    I would say that you would want to look into the "Exchange Mode" for GMail.  That would allow your iPhone to sync calendars, contacts and email with GMail just fine.  Doing the same with your outlook should also then sync those same with your PC using Outlook.  I've done teh iPhone side of this, but I since I don't run Lookout for my email client, I'm not sure how that will work on the PC side.

  • How can I access the address file with all contact info and print it?

    i'd like to be able to print out address info, phone no.s, etc but not do that one contact at a time so I'm looking for a file that might have all the contact info available in one place that I can access.

    Export your address book as a Comma Separated (csv) file and then open it in Excel. Then you can arrange the data any way you desire.
    Open the Address Book window and from the menu bar select Tools-Export.

  • TS1424 I can't purchase a song, how can I reset the security password if possible

    I           iTunes!!!!                     

    1. See my User Tip for some help: Some Solutions for Resetting Forgotten Security Questions: Apple Support Communities.
    2. Here are two different but direct methods:
        a. Send Apple an email request at: Apple - Support - iTunes Store - Contact Us.
        b. Call Apple Support in your country: Customer Service: Contacting Apple for support
            and service.
    3. For other queries about Apple ID see Frequently asked questions about Apple ID.
    4. Rescue email address and how to reset Apple ID security questions

  • How to set up fb integrated on the new ios6

    i have an iphone 4 and i just did the update to the new ios6 and i do not know how to set up the integrated facebook for it to come  up on the notification center.  is it even compatible with the iphone 4. please help anyone!

    Open up Settings, and scroll down a lot until you see "Twitter" and "Facebook" right next to each other. From there, it's a simple matter of signing in.

  • Unable to renew the same Subscription

    I subscribed for 400 mins India subscription and it got expired.  Now I am trying to renew it, but it is not listed in the available subsriptions.  Please let me know how can I renew the 400 mins inida subscription.  Thanks.

    suvithas wrote:
    I subscribed for 400 mins India subscription and it got expired.  Now I am trying to renew it, but it is not listed in the available subsriptions.  Please let me know how can I renew the 400 mins inida subscription.  Thanks.
    Skype changed its subscription options for India in August, discontinuing the 400-minute and Unlimited India subscriptions.  Skype now has 4 subscription options - 60, 120, 800, or 2500 minutes per month.  For more details, click on the "Subscriptions" link at the bottom of this web page and enter India on the following page for more details.
    Patrick
    Location/Ubicacion: Arizona USA
    Time Zone/Hora Local: UTC/GMT -7
    If this message has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.
    Si esto mensaje le ha ayudado, por favor haga clic en "Aceptar como solución". Si encuentra un mensaje útil, por favor "Da Kudos" al final del mensaje, por lo que esta información puede beneficiar a otros.
    I am not a Skype employee. No soy un empleado de Skype.

  • How can I change the Video Display Mode when the Monitor displays UNSUPPORTED MODE?

    While setting up my new monitor, I changed the computer Video Display mode to 120 Hz by accident.  Now I can't see a thing on the monitor other than the words UNSUPPORTED MODE.
    My system is a newer HP Pavilion p7-1423W running Windows 8.1 with Intel i5-2320 3ghz
     I have tried the Startup mode by tapping ESC on powerup but the startup options don't help.  And the F11 option on the menu just makes the Startup screen disapear and returns the monitor to UNSUPPORTED MODE.  Tapping F8 doen't work and tapping F12 just puts me into the bios menus which don't help.
     How can I put the integrated Video Card back to a supported video mode when I can't see the screen?
    This question was solved.
    View Solution.

    Try the shift key + F8. If you can get in- doing a System Restore to a day before you messed up the setting should work without a need for Safe Mode.
    http://www.avira.com/en/support-for-home-knowledgebase-detail/kbid/1672
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

Maybe you are looking for

  • How do I transfer photos from my pc to my ipad?

    how do I transfer photos from my pc to my ipad?

  • Recording audio ONLY from a DVD into iTunes

    Hi, I'm new to macs having just got an iMac G5. So far I love it and it's loads better than any windows based system I've had. I'm wondering if it is possible to record the audio only from some music DVD's I have into iTunes...can anyone help or is t

  • Cs5 photoshop refund edge is bluring

    cs5 photoshop refund edge is bluring. i did a fresch install of lion on osx and fresch install of cs5 and now the refind edge in photoshop make my pictures blurring. I delete fonts, delete brusches but still the refind edge make my pictures bad.

  • Duplicates should be eliminate in an LOV

    Hi, I have a requirement in that,i created a Multi-Record block in the form.In the Multi-record block,say for a field name "Plot No" i have attached a LOV to display the List of Plot Nos.My requirement is that,If you insert a Plot No in one record th

  • Delay in prting HP laserjet 1200

    JUst recently upgraded computer from windows XP. The new machine has windwos 7 64 bit. Trying to use my HP Laserjet 1200, and there is a long delay in printing anything.  This dealy is anywhere from 30 seconds to a minute. I can watch the little gree