How do i repair a bad atom in mp4

The movie will play in Quicktime but iMovie will not import it because of a bad atom.  Help please!

Just Right-click the Preference and select "Reset". It will be completely removed from about:config list the next time you start Firefox.

Similar Messages

  • How to repair a bad block on internal hard drive?

    I've just performed a surface test on my internal HD
    It reports back one bad block, at # 1, 118, 671, 700.Filename = N/A.
    1. Should I be concerned about this? I have not noticed any performance issues.
    2. If I wanted to get rid of it anyway, how do I repair that bad block?
    Please advise.
    Many thanks.
    /gh

    Good to know this happens automatically.
    Is that something OS X automatically does on startup, or on shut down, or in background?
    But in this case, that automatic feature seems to have missed this block. Else the bad block would not show up in the utility, with a file in it.
    Or ,,,,perhaps it still shows up as a bad block in the utility, even though it's been mapped out.
    If that's the case, then I guess I need another kind of utility that would report the block has been mapped out....
    Any suggestions?

  • How do I repair the LCD backlight?

    I'm in the middle of a fiasco with my iMac (read all about it here: http://discussions.apple.com/thread.jspa?threadID=822352&tstart=0). Basically I sent the computer off for repair of the power supply and got it back with a non-functioning LCD.
    So it appears that the backlight is out. Using a flashlight at an angle, I can see the entire screen image (my desktop and all the icons). In normal light the screen looks black.
    The question is, how do I repair it? I opened the computer and found nothing obvious wrong. There is a four inch by one inch plastic thing located just below the DVD drive with two wires going to the LCD, and the lower wire seemed like it had a loose connection. I did not pull the guts completely out to access the LCD.
    I would like to fix this myself if I can be sure of the problem. I live 100 miles away from an Apple service center, so I would have to UPS it to them. CompUSA, which did the power supply repair, said I would need a whole new LCD panel for $750. He actually said that he didn't know what was wrong with it, and he would have to start replacing parts at my expense until he found what worked. The LCD panel was to be the first try (after a free power supply and logic board from the repair extension program).

    I found the problem and repaired it myself. The inverter was bad, and I found a used one on ebay for $39. The computer is not in warranty.
    Apple Tech support and the Apple Stores both said that for iMacs, they do NOT accept shipments and require in-person, carry-in service to Apple Stores. Third-party service centers (e.g. CompUSA) may allow mail-in service.
    I'm going to get Apple Care with my next iMac, but I don't like the fact that I will have to get service from an "authorized" third-party service center that honors Apple warranties (e.g. CompUSA). I would prefer Apple service, but 4+ hour drives each way are out of the question.

  • I can't open my gallery after i migrate the iphoto! How can i fix this bad problem?

    HI,
    I can't open my gallery after i migrate the iphoto! How can i fix this bad problem? Flz help me!!

    Try repair permissions with Disk Utility
    Regards
    TD

  • Help!!my x86 Solaris7 get error in booting step,How can I repair it?

    My compute is COMPAQ ARMADA M300(Notebook),There have two OS installed on it:
    x86 Solaris7 and Win2000 Prefessional��and they can be selected to boot through
    an LILO program of x86 Solaris.I have work normally with this configure allmost one year.
    Now,I got the error:
    from the LILO,when I selected Win2000,the win2000 boot and run okay;But when I selected
    x86 solaris,the beginning steps all were okay,but I got error when the booting step got in
    kernel booting, the screen output like below
    SunOS Release 5.7 Version Generic[UNIX(R) System V Release 4.0]
    Copyright(c) 1983-1998,Sun Microsystems, Inc.
    /pci@0,0/pci-ide@7,1/ide@0/cmdk@0,0:a: bogus sector number
    short read,0x2000 chars read
    /pci@0,0/pci-ide@7,1/ide@0/cmdk@0,0:a: bogus sector number
    short read,0x2000 chars read
    (Can't load KD)
    Type any key to continue_
    when I pressed the Enter key, the screen output like below,and locked the key and all other input.
    rebooting...
    BAD TRAP
    Page Fault
    Bad Kernel fault at addr=0x5ea43eeb
    pid=0,pc=0xfe8bf1fe,sp=0xe09ee000,eflags=0x10082,
    eip(fe8bf1fe),eflags(10082),ebp(fec0d510),uesp(e09ee000),esp(fec0d414),
    eax(80),ebx(27b8),ecx(1b),edx(5ea43ee0),esi(e046d000),
    edi(fec0d538),cr0(80050011),cr2(5ea43eeb),cr3(141000),cs(158)
    ds(160) ss(d000) es(160) fs(1a8) gs(1b0)
    panic:Page Fault on cpu 0.
    I tried several times with switch off power and reboot,but each time I got the same result.
    Please, Mail me and Help me to repair it!!!!!!!!

    MrMars wrote:
    Out of the blue one day I opened itunes and a pop up appeared that an itunes folder had become damaged.
    An iTunes folder or the iTunes library.itl file is damaged?
    How do I repair the damaged folder?
    You don’t.
    If iTunes is running the iTunes library.itl file was rebuilt.
    You can quit iTunes and restore the iTunes library.itl file from your most recent backup.
    You do regularly backup you computer, correct?
    If not, File > Add to library and select /My Music/iTunes/iTunes media/Apps/ folder.

  • How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility

    How do i repair or recover data from a corrupt USB external hard drive that does not show up on my Mac desktop or disk utility?
    Last night i was using my external hard drive, for some reason the folder just closed and i couldn't find it on my desktop.
    After googling solutions, i found it in the disk utilities, i clicked on the 'repair' button many times, but it said the 'error...' message.
    So i ejected it to try again, now when i connect the USB external hard drive it doesn't show up on my desktop or disk utilities.
    I really just want to either repair or recover the data on it because it literally has everything (documents, work files, photos etc) on it,
    I downloaded an application to recover my files but it needs the USB to at least show up.recognise it which mine doesn't.
    I know i should've backed it up on another USB, this definitely teaches me for next time to back up all my files.
    Are the files lost forever or can i recover them by going to a shop or using a software?

    Thank you for responding.
    This might sound stupid since i'm not really knowledgeable with Macs,
    but since all my files were moved from my mac computer to the external hard drive,
    is it possible to recover those files through my Mac - like recovering deleted files? 

  • Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?

    Pages 08 fonts- problems with Arial, Times New Roman - how do I repair them?
    Using 10.6.8 on MacBook Pro
    Mikeaaa

    I am running Snow Leopard. Transferring the same texts to TextEdit has no problems, so this is a Pages problem, I think.  Corruption of Times New Roman and Arial fonts, I suspect, but where? and what do I do about it? I just need to be pointed to a source of advice, I think.
    Thanks
    Mikeaaa

  • How can I repair damaged pdf files?

    I have several hundreds of damaged pdf files and want to repair them. I need to know how to repair them, for example with a software!

    Hello Sukrit,
    thank you for your reply!
    I have deleted the PDF Files and needed to recover them. The size will be shown, but I can't open all of them.
    I would like to recover them again or change them again to PDF files, if possible.
    With regards,
    Stephan
    Von meinem iPad gesendet
    Am 24.04.2015 um 15:41 schrieb "sukritd15" <[email protected]>:
    How can I repair damaged pdf files?
    created by sukritd15 in PDF Forms - View the full discussion
    Hi Stephan ,
    Acrobat is capable of repairing the damaged PDF' ,however it depends on the requirement as to how do you want to repair them.
    There could be several reasons that can damage a PDF.
    We need to know the cause that has damaged those PDF' and how exactly you want to repair them in order to assist you accordingly .
    Regards
    Sukrit Dhingra
    If the reply above answers your question, please take a moment to mark this answer as correct by visiting: https://forums.adobe.com/message/7474818#7474818 and clicking ‘Correct’ below the answer
    Replies to this message go to everyone subscribed to this thread, not directly to the person who posted the message. To post a reply, either reply to this email or visit the message page:
    Please note that the Adobe Forums do not accept email attachments. If you want to embed an image in your message please visit the thread in the forum and click the camera icon: https://forums.adobe.com/message/7474818#7474818
    To unsubscribe from this thread, please visit the message page at , click "Following" at the top right, & "Stop Following"
    Start a new discussion in PDF Forms by email or at Adobe Community
    For more information about maintaining your forum email notifications please go to https://forums.adobe.com/thread/1516624.

  • I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

    I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! Why is this a problem and how can i repair it?

    "I have an Iphone 4s and i can't make a connection to my mac and other devices via bluetooth! ":
    That is correct.
    "Why is this a problem and how can i repair it?"
    Becasue this has never been a feature of iphone/ipod/ipad.  There is nothing to repair.

  • How can I use a bad IMEI AT&T iphone 5 with straight talk ?

    Someone sold me a bad IMEI AT&amp;T iphone 5. I had an AT&amp;T iphone 4 with straight talk prior to buying this phone. I didn't know the IMEI was bad so I bought the iphone 5 hoping to switch. I cut my SIM card and put it into the iphone 5. Everything worked perfectly fine so I went ahead and gave the dude the money. I went to sleep and wake up the next day and try to make a call and I get a message saying my phone has been blocked from the network. I contacted straight talk and they thought it was a problem of theirs so somehow they got my phone to work again. Everything was good , calls, texts , and data. 2 hours later, the same problem happens. So I call straight talk again , tell them the problem. They fix It again, 2 hours later , THE SAME PROBLEM. I gave up this time and began looking for answers. Is there any way I can use this iphone 5 with straight talk ? There was a comment I saw through my search for answers where if I get another straight talk sim everything would work again. Is this true? How can I use a bad IMEI AT&amp;T iphone 5 with straight talk ?

    If that IMEI has been blacklisted by AT&T, then it is blacklisted by all USA carriers, as well as several participating Canadian and Mexican carriers.
    As of 31 October 2012, USA Cellular Providers are sharing a common IMEI/ESN database to ensure that phones blacklisted on one carrier can't be activated on another carrier.  AT&T and T-Mobile are also participating members of the GSM-networks global shared blacklists.

  • How do I repair a scratch on my laptop?

    How do I repair a scratch on my laptop?

    If its on the alloy casing, you DONT.
    Live with the "beauty mark".   As someone with a fair amount of metal polishing skills over 20 years...., I can tell you there is nothing more absurdly 'painful' than removing scratches from MATTE ALUMINUM.
    Remove a scratch off metal? EASY
    But.......then then have to blend the sanding out,...then you have to raise the finish and then LOWER IT to match the matte finish, which is absurdly HARD.
    If you try to buff / sand etc. it out, youll make a small spot look like a giant eyesore.
    Only options are:
    A: pay for a replacement bottom plate or (i dont know where your scratch is) unibody (too expensive really)
    B: live with the scratch
    C: put a sticker over it

  • How to find out which Badi is triggering in which transaction

    Hi SAP gurus,
    Can any one tell me How to find out  which Badi is triggering in which transaction.
    If I have a BADI . I want to know in how many transaction it will trigger.
    Can you help me in this issue. Its very important and urgent.
    Points will be rewarded.
    Thanks,
    Satish.

    Hi Satish,
    Check this blog -
    /people/alwin.vandeput2/blog/2006/04/13/how-to-search-for-badis-trace-it
    Check Clemens reply in this thread, its great-
    BADI
    <b>Reward Points if this helps,</b>
    Satish

  • I rented a movie and it appears in the video app, but it did not fully download. It does not appear in downloads how do I repair the file?

    I rented a movie and it appears in the video app, but it did not fully download. It does not appear in downloads how do I repair the file?

    Did you download it using iTunes for Windows, or did you download it directly to an iOS device?
    If you can't find the movie you downloaded on your iPad, iPhone or iPod Touch, check inside your Videos App

  • How can I delete a bad app completely from my iPad mini in order to re-download it as though I never had it?

    How can I delete a bad app completely from my iPad mini in order to re-download it as though I never had it?

    Yes, it will now always show that you purchased it, but with it deleted from ipad, when yu click the icon to download again, it will download the latest versioon available from the app store.
    You cannot delete what is in the app store. nor can you erase your previous history of purchasing the app.

  • I can't burn a dvd using any method, Idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when i click burn and enter the disk??? how do i repair my superdrive for imac

    I can't burn a dvd using any method, idvd tells me that my super drive is missing, dvd studio pro quits when i click burn and disk utility keeps spitting the disk out when I click burn and enter the disk??? how do i repair my superdrive for imac, or how do I do whatever I need to do to get it working: I have already tried using a lens cleaning cd and also restored my nvram or something i forget what it was called but i restarted my computer holding down  command+optoion+p+r and still nothing???
    Free solutions are the best, although if I have to pay I will, I would prefer to not have to buy an external burner if possible and already know that is an option so please don't give me that answer... thank you for any help you can give

    Unless your iMac is still covered by AppleCare, get an external DVD burner.
    You can get perfectly good ones from Amazon for less than $40.

Maybe you are looking for