How do I replace a failed hard drive and restore with time machine

My hard drive died on my 2009 MacBook Pro. I regularly backed up my data using Time Machine. How do I format the drive and restore fom my USB TimeMachine drive.

If you haven't made a Lion or Mt Lion install USB thumb drive or used the Recovery Disk assistant to make a USB thumb of the Recovery HD then you will need to boot the system from the original OS Install disk that came with the system or a Snow Leopard disk you bought to upgrade to Snow Leopard. Then use the option to restore from TM backup.
Or if you have made  New backup since install Lion or Mt Lion then that Tm backup may have a copy of the Recovery HD on it. Only way to tell is connect your TM backup drive and when starting the system hold down the Option key and see if you get a link that says Recovery HD.

Similar Messages

  • Macbook won't recognize external Hard Drive and issues with Time Machine

    Hello everyone,
    I have just bought a new Macbook Pro with Mountain Lion and I am currently having problems with Time Machine.
    The issue begun in Snow Leopard: Time Machine was taking too long to backup, and would often not finish the backup because the external hard drive would be unwillingly ejected.
    Now with Mountain Lion I have reformated the drive (Mac OS Journaled) and about a third of the way through had the same issue: the drive was ejected before the backup could be finished. I restarted the machine and it happened again. However, now the computer won't even recognize the external drive when I plug it in. I have also tried to power off/on the drive itself to no progress.
    I have tested the USB port with another drive and the port is fine. I have also tested the usb cable and it is fine. And Disk Utility does not recognize the drive (even when I try the >diskutil list command in terminal).
    Now, I can hear the drive humming normally when I turn it on, and it is not usb-powered (my electricity current does fluctuate).
    Could the interrupted backup procedures have damaged the drive? And if so, wouldn't the computer recognize it anyway?
    It is a 4 year old WD 1 TB that is used exclusively for TM and has never left the house.
    Thank you for your time reading this and let me know if you need any more information that could help out.
    Cheers!

    From your description, I'd suspect a failing drive. Maybe time for a new external, especially as you've already re-formatted and it's still playing up.
    I had a similar problem with one of my clone backups a few weeks ago - it failed, I erased it, re-cloned, worked a couple of times and then it failed again. Disk Utility didn't throw up any errors after re-formatting. I guess all disks die at some point.

  • IMac won't boot after replacing hard drive and restoring from Time Machine

    I was having problems with my iMac but upgraded to Lion when it came out. Had a few good days and then my hard drive died.
    I had the drive replaced and the repair people put Snow Leopard on the new drive.
    I then tried to restore everything from my Time Machine backup. At first when I tried to log on the computer wouldn't accept my password (i know it was right).
    I decided to reinstall again using the snow leopard dvd i had. This time, the computer booted up (didn't ask me for a passord) and looked like it was in the process of setting things up. But Mail kept saying it was going to import messages but then quit and restarted a few seconds later. When i quit it it just came back again and again. I could see Chrome open behind it with my bookmarks in the toolbar and see other restored things, but the overall look was grey and not everything was there.
    When i restarted from the HD and not the dvd i could never get past various shades of grey and the circling progress indicator. Never booted up at all.
    I read about Lion having some restore hd functionality but it doesn't show up when i restart with option key. Am I in limbo between operating systems?
    Any advice as to steps to take? I don't know much about this stuff.
    Thanks for any help.

    Yes, if you picked a Snow Leopard backup, that's what you got. 
    You could pick a Lion backup, and it would restore it, but that wouldn't create the Recovery HD, which you will need, sooner or later.  See Using the Recovery HD.  You'll need to re-download Lion for that to be created.
    When you do that, after downloading but before installing Lion again, you might want to do this: Making a Lion Install disc or partition.  Then if you need to reinstall Lion again, you can do it from that, instead of having to download it again.

  • Perfect Hard Drive To Use With Time Machine?

    Hi,
    Has anyone found out what's the perfect External Hard Drive to use with Time Machine?
    I have experience with a few of WD's My Book models (Essential, Pro and Studio). The problem with all of them is that they automatically keep switching themselves off (spin down) and on (spin up) throughout the day, in an effort to save power. But it's actually quite annoying. The My Book drive will automatically turn itself off, and then turn back on again within the space of one minute. Also, going to use Spotlight (even if you've excluded Time Machine Backups from being indexed) will automatically prompt the My Book drive to turn back on, which introduces a small delay to using Spotlight.
    Does anyone make an External Hard Drive, with a Firewire 400 or 800 connection, that stays on ALL the time and doesn't automatically make decisions about when it should spin down or spin up?

    I'am using a 500Gb Freecom Pro Hard Drive connected on USB via my Cinema Display. I so forget about it that I often forget to disconnect it from my laptop before leaving the office... Never complained about it
    Btw, it does not implements the energy saver Auto turn off/on feature which I don't need cause the time it could mostly be really useful is by night. As it stops when I disconnect the USB and start again when I connect it back.. this is perfect to me.
    I must say I'm quite happy with every Freecom product I bought and this one certainly don't break the rule

  • What brand external hard drive is best with time machine

    what brand of external hard drive works best with time machine?

    Contrary to the other two replies, I will relate what I've read here: WD drives are fine, but their (cheap?) enclosures are subject to failure. Some buy a bare WD drive and install it in an Oxford Chip external enclosure (OWC / macsales.com would be one source). And, I have two LaCie Quadras and one OWC Mercury Pro - both are generally recommended here. If you want it bootable, most WD drives do not support it:
    http://wdc.custhelp.com/app/answers/detail/a_id/1787/related/1/session/L2F2LzEvd GltZS8xMzUxNTIzMzIwL3NpZC9ueUFYc1g5bA%3D%3D
    Please note: it's good to have an external hard drive which has its own power supply and, as mentioned, FW 800 or USB 3). You also do not need any software that comes on the external - you will most likely need to format it anyway because most come formatted for Windows, but that is easy using Disk Utility.

  • I just installed a larger hard drive, and used my Time Machine Backup to transfer my info back to the new hard drive. When I open Iphoto, my thumnails are there, but they aren't linked back to the actual photos.I see the photos in my HD. What should I do

    I just installed a larger hard drive, and used my Time Machine Backup to transfer my files back to the new hard drive. When I open Iphoto, my thumbnails are there, but they aren't linked back to the actual photos. I see the original photo files in my HD. Is there a way to link the Iphoto thumbnails back to the original files?

    Use the Firewire cable and t boot the old Mac's hard drive to the new Mac's desktop and transfer your entire iPhoto folder.
    Use Disk Utiliy to erase'format HFS+ Journaled your TimeMachine drive and use the free Carbon Copy Cloner and clone your new boot drive to the external, it's hold option bootable.

  • Hard Drive Showing up with Time Machine Icon

    I have two hard drives in my Mac Pro. I use one as the time machine backup drive. When I set that one up it changed the icon to the Time Machine icon. Today when I logged into my computer my normal drive changed from the regular hard drive icon to the time machine icon. Any ideas?

    FYI...
    The problem was that before I started using Time Machine, I had used the FW portable drive to back up my laptop using Carbon Copy Cloner (which makes a bootable copy of your HD). I didn't erase the drive before using it as my Time Machine backup disk so both the FW drive and the HD had the same disk ID associated with them so the time machine icon ended up being associated with both of them.
    I erased the portable HD completely (yes, I lost my TM backups but that's a reasonable loss) and then reviewed the Startup Disk under System Preferences. Only the boot drive was listed there correctly (before the erasure, both drives showed up there).
    I did a complete backup using TM overnight and then rebooted the system this morning....all is well now. The boot disk now has it's correct icon associated with it.
    Regards,
    Vicki

  • How do I replace my internal hard drive and not lose windows partition?

    Hello,
    I am wanting to swap my internal hard drive out for a larger one. What do I do about my windows partition? I only use boot camp, and there is some stuff on my windows side I don't want to lose. I know how to make a clone for OSX, and I know how to replace the actual hard drive, it's just the windows that I am a little sketchy on.
    Thanks for your help.

    WinClone - check the faq and forum for tips and read the docs
    http://www.twocanoes.com
    Pull your hard drive and put it in external case, OWC sells such kits, you could probably use a good windows clone program too.
    but you need room on an (external) hard drive to hold the Windows image (uses a sparse disk image file is all).
    Paragon Software has been busy releasing programs and updates to help Mac users running Windows, using NTFS (and EXT2/3), as well as CampTune (free for now) for resizing Windows or linux boot camp partitions.
    http://www.paragon-software.com/downloads/demo.html

  • External hard drive not working with Time Machine

    I have an Iomega network hard drive attached via ethernet cable to my Airport Extreme router.
    I plugged the hard drive in. Everything works like it should. I can see the drive in Finder and I can read and write to the drive. I do share the network drive in a mixed WIN and OS X environment. I never had to reformat the drive and I can read/write to the drive with no problems from all of my computers.
    I turned on Time Machine on my iMac and walked through the simple setup screens there. I never set anything up on the hard drive through the drive interface software. And Time Machine worked fine for about 4 months. Then all of a sudden, Time Machine just stopped backing up and I got all kinds of error messages saying that the TIme Machine backup failed.
    So I went into Time Machine, turned it off, turned it back on. No luck. Same error messages.
    So I started fresh. I deleted the prior Time Machine backups and I am back at the TIme Machine set up screen. OS X can see the TIme Machine share on my external hard drive and I tell the setup wizard that's the drive I want to use.
    Then I get a window that says it's trying to connect to the external hard drive which I call "Cloud_Drive". After about 30 seconds, I get an error window that says
    "There was a problem connecting to the server "Cloud_Drive-TimeMachine"
    The server may not exist or it is unavailable at this time. Check the server name or IP address, check your network connection, and then try again.
    At this point the external drive is still visible in FInder and I can read/write to it from my iMac. I just cannot understand why Time Machine was working and then all of a sudden it stopped.
    I did go into the software management of the drive and found an area in which to turn Time Machine on on the drive's side. Which I never did before so I turned it on and then I'm prompted to enter the name of the computer and the ethernet ID. I entered the name of the iMac and I have tried using the WiFI MAC address - no luck getting TIme Machine to work and I've also entered Terminal, found a MAC address under the line titled "ether" and still the same result.
    I have also changed the destination of the Time Machine files on the external hard drive and the Time Machine wizard does write a sparcebundle file to that new location but still get the same error message above.

    Is it a firewire ext. HD?
    Yes, many are reporting same, there is a firewire fault and TB HD on external HD from LaCie (Seagate) and from WD especially.
    Technicians are looking into it.
    Until there is resolution, consider setting up a USB ext. Time machine HD.
    Until then consider confining Mavericks use with USB HD.
    Ive tested a long line of USB HD on Mavericks, all seem fine.

  • Quiet external hard drive for use with Time Machine?

    Few questions related to Time Machine:
    1- what external hard drive that would be good to use with Time Machine, that also runs relatively quietly? Since TM runs 24/7, am looking for one that is quieter than my current G-tech.
    2- Please confirm what size is optimal relative to the size of the internal hard drive.
    3- I currently use a separate external hard drive as my bootable disc.  Is it possible/preferable to have these be on one and the same drive?
    Thank you.

    1. I like these (have three of them) - literally whisper quiet:
    http://eshop.macsales.com/shop/firewire/1394/USB/EliteAL/eSATA_FW800_FW400_USB
    2. You should allow 2 - 3 times your internal drive's size for TM.
    3. No, it'd be best to be on another drive - you can create separate partitions, but if/when the drive fails, both of your backups would be gone. So, keep your clone on a separate disk. In fact, it's good to have two different backups.

  • What is best hard drive to use with Time Machine?

    I was using a WD Passport 2TB external drive for my Time Machine backup for iMac which has a 3TB drive.  The drive is almost 1 year old and only bought it to for backing up with Time Machine.  The drive failed when I tried to restore a iPhoto database to my iMac on Sunday. Today on Tuesday evening. Time Machine said it could not perform a successful back up due to Disk Failure. I ran the disk utility and it gave me error. I had to erase and reformat the drive. 
    I was able to erase and reformat the drive and ran the disk utlity again. And it says it is working fine. I dont plan to use these portable drives for backing.
    I think its time to get a better Hard Drive for my Time Machine backups. Any suggestions? 

    WD commercial drives for consumers are the worst,  as meant their "green / blue / red" series.
    The best are Hitachi and Toshiba both statistically and otherwise.
    BEST FOR THE COST, Toshiba "tiny giant" 15mm thick  2TB drive (have several of them, lots of storage in tiny package)    $100
    http://www.amazon.com/Toshiba-Canvio-Connect-Portable-HDTC720XK3C1/dp/B00CGUMS48     /ref=sr_1_3?ie=UTF8&qid=1390020791&sr=8-3&keywords=toshiba+2tb
    best options for the price, and high quality HD:
    Quality 1TB drives are $50 per TB on 3.5" or  $65 per TB on 2.5"
    Perfect 1TB for $68
    http://www.amazon.com/Toshiba-Canvio-Portable-Hard-Drive/dp/B005J7YA3W/ref=sr_1_ 1?ie=UTF8&qid=1379452568&sr=8-1&keywords=1tb+toshiba
    Nice 500gig for $50. ultraslim perfect for use with a notebook
    http://www.amazon.com/Toshiba-Canvio-Portable-External-Drive/dp/B009F1CXI2/ref=s     r_1_1?s=electronics&ie=UTF8&qid=1377642728&sr=1-1&keywords=toshiba+slim+500gb
    *This one is the BEST portable external 2.5" HD available that money can buy:
    HGST Touro Mobile 1TB USB 3.0 External Hard Drive $88
    http://www.amazon.com/HGST-Mobile-Portable-External-0S03559/dp/B009GE6JI8/ref=sr     _1_1?ie=UTF8&qid=1383238934&sr=8-1&keywords=HGST+Touro+Mobile+Pro+1TB+USB+3.0+7 2 00+RPM
    Most storage experts agree on the Hitachi 2.5"
    Hitachi is the winner in hard drive reliability survey:
    Hitachi manufacturers the safest and most reliable hard drives, according to the Storelab study. Of the hundreds of Hitachi hard drives received, not a single one had failed due to manufacturing or design errors. Adding the highest average lifespans and the best relationship between failures and market share, Hitachi can be regarded as the winner.

  • External hard drive to use with Time Machine? Thoughts?  Mac newbie.

    Hello. Switched to an imac and have loved the experience. Was just about to buy an external hard drive when apple announced the time capsule. I've been holding off thinking I would purchase one but now I'm re-thinking it.
    Between music, videos and pictures, I currently have about 400gb of stuff (and it will grow). My main concern is backing up (archiving) a copy of these files. Backing up other system files is a second concern after that.
    I'm thinking of buying a 1TB external hard drive, firewire capable, partitioning part of it to be an archive drive, and the other part to use with time machine. Skip the time capsule.
    Will that work? Other recommendations?
    If so, any recommendations on a quiet, reasonably sized (i.e. doesn't take up the entire corner of the desk), 1tb external hard drive?
    Thanks.

    Clayton, if you're only backing up one Mac, then you can purchase any good, reputable 750 GB or 1 TB external drive.
    Considerations:
    1) Reliability is key here. You want a drive that works. Various people have complained about Western Digital (me included), so take that into consideration.
    2) Quiet is important. You have a quiet computer -- why louse up the working environment with a noisy drive?
    3) FW (Firewire) 800 is faster than FW400, which is faster than USB. But once you get the initial backup done, it really doesn't matter how fast the drive is, because it works in the background and doesn't hamper your work. And if you DO need to restore your entire computer via Time Machine (I've done it), speed is less important than reliability. Even if it takes 3 hours, you'll be grateful. So while some may counsel you to get a 'fast' drive, reliability is more important.
    4) On FW versus USB, you'll hear many claims. Again the key is reliability versus speed. A good USB drive is fine for what you are doing; FW is faster. Some folks have had problems with one or the other, so hear what they have to say.
    5) Every drive dies. That's true for any electromechanical device. Don't think you've solved your backup problems by plugging in a drive and walking away. Your most critical files need a second backup, be it to a DVD, CD, thumb drive, network drive -- something. The more critical it is, the more backups you need. If you're writing your Ph.D. thesis, by definition you can't have too many backups
    6) Convenience matters. You can 'roll your own' drive if you have experience -- buy a case, buy a drive, assemble, etc. But it's many times easier, particularly for a Time Machine backup drive, to just buy a reliable (there's that word again) external HD off the shelf.
    7) Finally, follow directions. Apple tells you how to set up a TM drive. Do it their way. That means, format the brand new drive and make it a 'GUID' partition. Use the Apple Disk Utility. Follow directions.
    Good luck,
    Steve

  • What external hard drives work best with time machine

    What is the best external drive that is compatible with time machine? 

    I see a lot of people on the Apple Discussion boards mention Time Capsule. The experience I've heard from folks with the First gen units was terrible. Poorly designed, poorly manufactured (sorry Apple!). They suffered all kinds of heat stress failures etc. The follow up devices are supposed to better, but I don't think it's mandatory you buy Apple product to run Time Machine. In fact choose based on price/capacity, then possibly on Manufacturers reputation. I use a external USB dock that has a Serial ATA connector on it. That way I can swap drives out when/if they fail or get full. That way I KNOW who manufactured the actual drive itself. Often times if you get a Time Capsule the drive manufacturer is the "flavor of the month" so to speak. There's a number of outfits that make these bare SATA style docks, and you can connect them through USB (which I have) or higher speed connectors like FireWire 800 (for faster reads/writes/backups). My best recommendation is to buy one of those SATA dock devices, then buy a bare hard drive from a reputable manufacturer. Then setup Time Machine and use the left over space that it doesn't use for your growing iPhoto collection? Use your best judgement, as there's no real right/wrong way.

  • How to store photo's on external drive and still use Time Machine and secondary back up plan

    So, My Macbook Pro is now going on 4 years old and I've accumulated around 15,000 photos in iPhoto now.  I would like to move everything (or at least everything older than 12 months) onto a portable external drive, but i'm not sure the best way to do this and still keep a good back up plan.  My current process is the following -- I have external HD same size as my current internal drive on the MBP, which is formatted that i use Time Machine.  I also have a paid subscription to Crash Plan online cloud back up that is connected to my laptop drive (CrashPlan is constant and easy, so I just USB plug in MBP to EHD a few times a month and that's it).  If I were to move most of my picture/video's/important docs to an external drive, how would I back that up with Time Machine, and if I did, how would I back up my laptop drive with Time Machine also, and what drive would I assign my Crash Plan online account too?  Cant seem to wrap my brain around the easiest and best method.  (In short, I want most pics/video's stored off the laptop so that my HD is not consumed; but still easy to access if needed, and easy to back up)  Also driving this need for a solution is the fact i would like my next lap top to be an Macbook Air, which I know I can't keep my current set up would not work.  Any thoughts are appreciated.

    if your internal drive has 250 GB and the external drive with the iPhoto library as well, your TimeMachine should have at least 1 TB.
    I have read over some of CrashPlans support docs and it sounds like it will be able to back up and restore the iPhoto library, and as long as you restore the entire library and not single photos, it will save and restore all metadata as well.
    I studied their documents to.  They are saying they can backup any filetype. And they are saying the iPhoto libraries or Aperture libraries will be backed up automatically, when they are in in the Pictures folder, because the Home folder will be backed up.
    On their screenshot you can see, that the libraries are backed up as a nested set of folders, and not as a package. That let's me doubt that the dependencies within the package will be treated correctly. To restore from the backup they recommend to restore the set of nested folders.  What I could not find anywhere in the documentation is any information on the filesystem they are storing the backup on. If it is not Apple's MacOS Extended (Journaled, not case sensitive) the restored library may be corrupted, because the internal links in the databases may not work. Try to find out something about the filesystem on the backup servers, before you entrust your iPhoto library to that servers.

  • Which format for external hard drive to use with time machine backup and connect to windows laptop?

    Hi!  I have an external hard drive on which I have transferred my iTunes library (just mine - not others).  I have also a folder containing just films (some but not all of which are in iTunes too)  Everything has been working just fine until yesterday I noticed that Time Machine was not including the external hard drive in back up as it wasn't formatted.  So I have moved everything back to the Mac hard drive and and ready to format the external hard drive - but understand that if I do the contents cannot be opened from a windows laptop ...  is that right?  Is there are format I could choose that would allow Time Machine to back up and allow Windows to open as well (the idea being that I take the external hard drive with me on holidays etc!!)  Many thanks for any advice. 

    ok - I understand.  I have managed so far to format the drive (on windows) to exFAT file system - which apparently works with both Windows and Mac - but you're  correct - it will not be included in time machine backup as I have checked the back up files and Samsung is not showing.  Reckon I'm onto having to buy yet another portable hard drive just for windows - or of course buy myself a new mac book!!  Can I ask you please - does the drive have to be clear of everything before I change the format - or can I change it with the files still in there?  Also, got any quick ways duplicating the files onto another External Hard drive (for use on the windows laptop)  At the moment the files are taking 2/3 hours + to copy over!  Thank you! 

Maybe you are looking for

  • Sending report output to printer directly (on Unix)

    Hello. Please help. I was previously using LPD for printing my oracle character mode reports. Now we have migrated to a new versions which has more graphics and colours. Also, some of my new reports are in PDF format. I would need some help sorting o

  • HT1414 My iMessage isn't working right. What do I do?

    Here are some of the problems occuring: 1. I looked up how to get a number for iMessage for my iPod touch, a brand new iOS 5.1 but it says 'First make sure that your iOS whatever is running' and it showed a little example in Settings, which didn't re

  • Having problem in recognising file using utl_file package..

    Hi, I am using utl_file utility to read the CSV file, utl_file.fopen function is useed to open file. This fopen function has three input parameters, second parameter is file name. My problem is that, i have to read file on daily basis. File name will

  • Image in datatgrid(table)

    Hi, I am using Datagrid where one of my column should contain some images .I could display images during my design time but at runtime the images are not displayed .could any one help on this. thanks in advance regards Amutha

  • AcroPDF.dll in VC 2005:how to get the zoom value

    I'm using the 'AcroPDF.dll' with VC2005/MFC. Is it possible to get the current zoom value to increase or decrease it step by step with out the readers toolbar? best regards sven