How do I report a repeatable 3G defect?
I've noticed a repeatable defect with the 3G Iphone. Anyone know how to get this issue submitted to Apple so it can be fixed in the next release?
The issue is that after you sync your Iphone, most of the 3rd party apps that you have installed no longer work. When you try to open them, they show their splash screen then crash. This lasts until you install a new app from the store. After the install, every app works again.
This issue has been 100% consistent on my phone, and now 2 of my friends have gotten phones recently. They have the same issue, so I know it's not just my phone.
Any help in getting this to Apple's attention would be much appreciated. I'd really like to see this fixed in the next update.
You can call 1-800-my iphone and tell them or write to:
www.apple.com/feedback/iphone.html
While this doesn't happen on my iphone, many others have reported it here and I feel sure that Apple knows about it.
It can't hurt to tell them again.
Similar Messages
-
How Can I report a defective iPad app?
How can I report a defective app. It worked for months, but now it does not. I have deleted the ap and then downloaded the ap again but the ap still does not work. So I thought I would report it, but how?
You should contact the application developer regarding this matter. You should be able to find a link to the developer's support page on application prouct page in the App Store, beneath the app's description.
-
How can I report people that are harassing me on my question?
I posted a question on how to fix a problem that I had with my iPhone. When a person posted me talked about dealing with an employer to solve the problem. No it don't matter how I read it I asked why did they assume that without asking me if I even had a job that the phone was used for. After that the harassment started as if they were defending their friend and I was cruel to them. I did get an answer to my problem but the harassment keep going on and on and on even one wrote that because of that one question I shouldn't be able to post anymore questions when I would need it.
How can I report this to someone? Who else have these people harassed? Would these people be addressed that they shouldn't be behaving like this?Sorry, but the poster before Bee, and Bee herself did not write anything that could be construed as harassment. If those posts deeply hurt you (as well as the original post that set you off) then I would strongly suggest that the Internet is NOT a place you should spend any time as your feelings are going to constantly get hurt. In fact, I'd suggest avoiding all contact with other people as much as possible if KiltedTim hurt you with his post.
As has been repeatedly explained, he merely asked because that is another avenue that could cause the Camera app to be removed, and he went on to explain how this happens. There is nothing personal in it, we don't care how you got your phone, where you work, what type of job you have, etc. He did care enough to join in and give another possibility as to why your camera icon was missing. If you do a search of these threads you will find that more than a few people have decided to put their work account on their personal iPhone and the profile installed on their iPhone by personnel at their workplace changes features on the iPhone.
Again, if this, and the answers here, deeply hurt you, pull the cable from the Internet immediately. -
Re : How to configure report painter
hii kings
could u tell me how to create report . what are the steps require to report painter. In that what is the purpose of Library , how is create the same. We can report Create report Under the library sothat which purpose.Hi,
now i will send it steps
Report Painter
Key Features of Report Painter
Prepare Plan/Actual/Variance Expense Report
Cost Elements Actual Plan Variance
Salaries Xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Office Xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Travel Xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Supplies Xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Total Xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx xxxxxxxxxxxxxxx
Use the following account numbers and descriptions in your report:
Account number Description
430000 Salaries
470000 Office
474100 Travel
476000 Supplies
Create a new report.
Menu Path: Information Systems > Ad hoc reports > Report Painter > Report > Create
On the Report Painter: Create Report screen, enter:
Library 1VK
Report RSS-A
Report Description Report w/Total Row
Hit <Create> button to move to the next screen.
Create the Rows of the Report The first four rows are cost element characteristics
Screen: Report Painter: Create Report
Type Cost Elements in the lead column cell
Double click on Row 1
In the Pop-up window 'Element definition: Row1", enter:
Note: If Pop-up window (select element type) appears, choose 'characteristics' and hit <Enter>.
Select 'Cost Element' as the characteristic in the 'Available characteristics' section
Hit <Move selected to left> button to move the characteristic 'Cost element' to the 'Selected characteristics' section
From 430000
Hit <Change short, middle and long texts> icon (at the bottom of the window)
In the Pop-up for Enter Texts, Enter:
Short Description from Table above for this Account
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close the Pop-up
Hit <Confirm/Enter> to check consistency and close.
Repeat the above steps for the other 3 accounts
Create a formula row to calculate the total of the Cost Element rows
Screen: Report Painter: Create Report
Double click on Row 5 or the next empty row.
In the Pop-up for Select Element Type select 'Formula'
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Formula'
Use the calculator buttons to create the formula Y001 + Y002 + Y003 + Y004
Hit <Enter> to close the Pop-up
In the Pop-up 'Enter Texts'
Short Total
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Enter> to close the Pop-up
Make sure your cursor is in the cell containing the word Total
Follow the Menu Path: Formatting > Row
In the Pop-up 'Row Formatting'
Over score checked
Underscore checked
Hit <Enter> to close the Pop-up
Create the first column for actual costs
Screen: Report Painter: Create Report
Double click on the Column 1 cell.
In the Pop-up 'Select element type'
Select Predefined Key Figure radio button, and press <Enter>.
In Pop-up 'Choose predefined column'
Select Actual Costs as the predefined column, and press <Enter>.
In the Pop-up 'Element definition: Actual costs'
Press <Confirm> to check consistency and close.
Define the second column for plan costs
Screen: Report Painter: Create Report
Double click on the Column 2 cell.
In the Pop-up 'Select element type'
Select Key Figure with Characteristics as the element type, and press <Enter>.
In the Pop-up 'Element definition: Column 2'
Value Type 01 (Plan)
Version 0 (Actuals)
Valuation 0 (Legal valuation)
Hit <Change short, middle and long texts> icon
In the Pop-up for Enter Texts, Enter:
Short Plan
Click on the <Copy short text> button to copy this description to the other fields.
Hit <Confirm> to close Pop-up.
Hit <Confirm> to check consistency and close.
Create a formula column to calculate the variance between actual and plan costs
Screen: Report Painter: Create Report
Double click on the Column 3 cell
In the Pop-up 'Select element type'
Select Formula as the element type, and press <Enter>.
In the Pop-up 'Enter Formula'
Use the calculator functions to create the formula X001 X002.
Hit <Confirm> to close the Pop-up
Enter Variance as the text for all three fields.
Hit <Enter> to close.
Define the parameters for general data selection
Screen: Report Painter: Create Report
Follow the Menu Path: Edit > Gen. data selection
In the Pop-up 'Element definition: General data selection'
Select Controlling Area, Cost Center, Fiscal Year, and Period as the selection characteristics
Hit <move selected to left> icon to move the selected characteristics to the selected characteristics section of the window
Enter the following values for your characteristics:
Controlling area RSS ('from' field)
Cost center - 1000 to 2000
Fiscal year - Current year
Period - 1 to 12
Hit <Confirm> to check consistency and close.
Check the report for any errors and save it
Screen: Report Painter: Create Report
Follow the Menu Path: Report > Check or press < Shift + F6>.
When the system comes back with a message of No errors were found, click <Save> to end.
Assign the report to a report group using the function in Report Painter
Screen: Report Painter: Create Report
After the system has come back with Report RSS-A was saved
Follow Menu Path: Environment > Assign report group
On the Insert Report in Report Group Screen:
Enter Z0#A as the group
Hit <Enter>
In the 'Create report group' pop-up window
Click <Yes> to create the group
Make sure the system has come back with Report RSS-A was saved in Report Group Z0#A.
Execute the report
Screen: Report Painter: Create Report
Follow the Menu Path: Report > Execute
Notice that there are no selection criteria to enter. These were hard coded in the general selection characteristics.
Click the <Execute> icon.
It is a very basic report of plan, actual, and variance costs for a group of predefined cost centers.
it's useful assigne points as a way to say Thanks
Regards
gvr -
How to merge borders of repeating frame and frame objects?
Hi All,
I have a repeating frame inside a frame.
Can someone tell me how to merge borders of repeating frame and frame objects?
I have searched this forum and spent lot of time. But I think I am missing simple thing.
THanks,
SathishI think 'Flex' mode is on. Change to Off. Flex mode icon is on the paper layout editor. For more, search report help for
Changing the current mode -
How 2 creat report for displaying the details of a Delivery Document using
how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
thank you
regards,
jagrut bharatkumar shukla
points will be rewardedHI
I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
*& Report ZDELIVERY *
report zdelivery message-id z9bhu .
types: begin of t_likp,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
end of t_likp.
types: begin of t_lips,
vbeln type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr,
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
end of t_lips.
types: begin of t_vbpa,
vbeln type vbpa-vbeln, "SD DocumenT Number
posnr type vbpa-posnr, "Item number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_vbpa.
types: begin of t_kna1,
kunnr type kna1-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr type kna1-adrnr, "Address
end of t_kna1.
types: begin of t_li_vbpa,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
* LFDAT TYPE LIKP-LFDAT, "Delevery Date
* WAERK TYPE LIKP-WAERK, "Currency
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
* MEINS TYPE LIPS-MEINS, "Base Unit of Measure
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
end of t_li_vbpa.
types: begin of t_final,
vbeln type likp-vbeln, "Delivery
erdat type likp-erdat, "Date for rec creation
kunnr type likp-kunnr, "Ship-To Party
kunag type likp-kunag, "Sold-to party
traty type likp-traty, "Means-of-Transport
vbeln1 type lips-vbeln, "Delivery
posnr type lips-posnr, "Delivery item
matnr type lips-matnr, "Material Number
arktx type lips-arktx, "Short Text for Sales Order Item
lfimg type lips-lfimg, "Actual quantity delivered
netpr type lips-netpr, "Net Price
vgbel type lips-vgbel, "Doc no of the reference document
vbeln3 type vbpa-vbeln, "SD DocumenT Number
parvw type vbpa-parvw, "Partner function
kunnrb type vbpa-kunnr, "Customer Number 1
name1 type kna1-name1, "Name 1
ort01 type kna1-ort01, "City
adrnr1 type kna1-adrnr, "Address
name2 type kna1-name1, "Name 1
ort02 type kna1-ort01, "City
adrnr2 type kna1-adrnr, "Address
name3 type kna1-name1, "Name 1
ort03 type kna1-ort01, "City
adrnr3 type kna1-adrnr, "Address
end of t_final.
* D A T A D E C L A R A T I O N
*&*********Internal Table Declaration****************&*
data: it_likp type standard table of t_likp.
data: it_lips type standard table of t_lips.
data: it_vbpa type standard table of t_vbpa.
data: it_kna1 type standard table of t_kna1.
data: it_li_vbpa type standard table of t_li_vbpa.
data: it_li_vbpa_temp type standard table of t_li_vbpa.
data: it_final type standard table of t_final.
*&*********Work Area Declaration********************&*
data: wa_likp type t_likp.
data: wa_lips type t_lips.
data: wa_vbpa type t_vbpa.
data: wa_kna1 type t_kna1.
data: wa_li_vbpa type t_li_vbpa.
data: wa_li_vbpa_temp type t_li_vbpa.
data: wa_final type t_final.
*&*********Data Declaration************************&*
data: d_vbeln type likp-vbeln.
data: flag type i value 0.
* S E L E C T I O N S C R E E N D E C L A R A T I O N
selection-screen begin of block block2 with frame title text-001.
select-options: s_vbeln for d_vbeln obligatory. "Delivery no
selection-screen end of block block2.
* A T S E L E C T I O N - S C R E E N E V E N T S
*AT SELECTION-SCREEN.
*PERFORM VALIDATE_DATA.
* S T A R T O F S E L E C T I O N E V E N T S
start-of-selection.
perform fetch_data.
perform merge_data_kna1.
*INCLUDE Z9BT_SH_***4_FORMS.
call function 'OPEN_FORM'
exporting
* APPLICATION = 'TX'
* ARCHIVE_INDEX =
* ARCHIVE_PARAMS =
device = 'PRINTER'
* DIALOG = 'X'
* FORM = ' '
language = sy-langu
* OPTIONS =
* MAIL_SENDER =
* MAIL_RECIPIENT =
* MAIL_APPL_OBJECT =
* RAW_DATA_INTERFACE = '*'
* SPONUMIV =
* IMPORTING
* LANGUAGE =
* NEW_ARCHIVE_PARAMS =
* RESULT =
exceptions
canceled = 1
device = 2
form = 3
options = 4
unclosed = 5
mail_options = 6
archive_error = 7
invalid_fax_number = 8
more_params_needed_in_batch = 9
spool_error = 10
codepage = 11
others = 12
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
sort it_final by vbeln.
loop at it_final into wa_final.
call function 'START_FORM'
exporting
* ARCHIVE_INDEX =
form = 'Z9BT_DELIVERY'
language = sy-langu
* STARTPAGE = ' '
* PROGRAM = ' '
* MAIL_APPL_OBJECT =
* IMPORTING
* LANGUAGE =
exceptions
form = 1
format = 2
unended = 3
unopened = 4
unused = 5
spool_error = 6
codepage = 7
others = 8
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'WRITE_FORM'
exporting
element = 'ITEM_LIST'
function = 'SET'
type = 'BODY'
window = 'MAIN'
* IMPORTING
* PENDING_LINES =
* EXCEPTIONS
* ELEMENT = 1
* FUNCTION = 2
* TYPE = 3
* UNOPENED = 4
* UNSTARTED = 5
* WINDOW = 6
* BAD_PAGEFORMAT_FOR_PRINT = 7
* SPOOL_ERROR = 8
* CODEPAGE = 9
* OTHERS = 10
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
call function 'END_FORM'
* IMPORTING
* RESULT =
exceptions
unopened = 1
bad_pageformat_for_print = 2
spool_error = 3
codepage = 4
others = 5
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
endloop.
call function 'CLOSE_FORM'
* IMPORTING
* RESULT =
* RDI_RESULT =
* TABLES
* OTFDATA =
exceptions
unopened = 1
bad_pageformat_for_print = 2
send_error = 3
spool_error = 4
codepage = 5
others = 6
if sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
endif.
*& Form VALIDATE_DATA
* text
* --> p1 text
* <-- p2 text
form validate_data .
select single vbeln into wa_likp-vbeln
from likp where vbeln in s_vbeln.
append wa_likp to it_likp.
if sy-subrc <> 0.
flag = 1.
endif.
endform. " VALIDATE_DATA
*& Form FETCH_DATA
* text
* --> p1 text
* <-- p2 text
form fetch_data .
select a~vbeln
a~erdat
a~kunnr
a~kunag
a~traty
b~vbeln
b~posnr
b~matnr
b~arktx
b~lfimg
b~netpr
b~vgbel
c~vbeln
c~parvw
c~kunnr
into table it_li_vbpa
from likp as a
left outer join lips as b on a~vbeln = b~vbeln
inner join vbpa as c on b~vgbel = c~vbeln
where a~vbeln in s_vbeln and
c~parvw = 'RE'.
endform. " FETCH_DATA
*& Form MERGE_DATA_KNA1
* text
* --> p1 text
* <-- p2 text
form merge_data_kna1 .
if it_li_vbpa[] is not initial.
it_li_vbpa_temp[] = it_li_vbpa[].
sort it_li_vbpa_temp by kunnr.
delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
loop at it_li_vbpa into wa_li_vbpa.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunag.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
wa_li_vbpa-kunnrb.
if sy-subrc <> 0.
wa_li_vbpa_temp = wa_li_vbpa.
append wa_li_vbpa_temp to it_li_vbpa_temp.
endif.
endloop.
endif.
if it_li_vbpa_temp[] is not initial.
select kunnr
name1
ort01
adrnr into table it_kna1 from kna1
for all entries in it_li_vbpa_temp
where kunnr = it_li_vbpa_temp-kunnr.
endif.
loop at it_li_vbpa into wa_li_vbpa .
wa_final-vbeln = wa_li_vbpa-vbeln.
wa_final-erdat = wa_li_vbpa-erdat.
*it_final-LFART = it_li_vbpa-LFART.
wa_final-kunnr = wa_li_vbpa-kunnr.
wa_final-kunag = wa_li_vbpa-kunag.
*it_final-VSTEL = it_li_vbpa-VSTEL.
wa_final-traty = wa_li_vbpa-traty.
wa_final-vbeln1 = wa_li_vbpa-vbeln.
wa_final-posnr = wa_li_vbpa-posnr.
wa_final-matnr = wa_li_vbpa-matnr.
wa_final-arktx = wa_li_vbpa-arktx.
wa_final-lfimg = wa_li_vbpa-lfimg.
wa_final-netpr = wa_li_vbpa-netpr.
*wa_final-GEWEI = it_li_vbpa-GEWEI.
*it_final-VOLUM = it_li_vbpa-VOLUM.
*it_final-VOLEH = it_li_vbpa-VOLEH.
wa_final-vgbel = wa_li_vbpa-vgbel.
wa_final-vbeln3 = wa_li_vbpa-vbeln.
*wa_final-PARVW = wa_li_vbpa-PARVW.
wa_final-kunnrb = wa_li_vbpa-kunnrb.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
if sy-subrc = 0.
wa_final-name1 = wa_kna1-name1.
wa_final-ort01 = wa_kna1-ort01.
wa_final-adrnr1 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
if sy-subrc = 0.
wa_final-name2 = wa_kna1-name1.
wa_final-ort02 = wa_kna1-ort01.
wa_final-adrnr2 = wa_kna1-adrnr.
endif.
read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
if sy-subrc = 0.
wa_final-name3 = wa_kna1-name1.
wa_final-ort03 = wa_kna1-ort01.
wa_final-adrnr3 = wa_kna1-adrnr.
endif.
append wa_final to it_final.
clear wa_final.
endloop.
endform. -
How to save report in PersonalCategory after creating it using java panel?
Hi,
Anybody knows How to save report in PersonalCategory after creating it using java panel?
I dont want to save it in public folder. I want to save report (webi) in user's personal category.
can anybody send me source code?
It will help me a lot.
Thanks in advance
Amol MaliHi teda,
i'm assuming that you have seen my post that i did successfuly save report in user's personal category.
Actually the report is created in webi java panel using RE SDK and is saved in Report Sample Folder then i'm saving it in user's personal category by following code
string query = "Select SI_PERSONAL_CATEGORIES From CI_INFOOBJECTS Where "
+ "SI_INSTANCE=0 And SI_ID=" + reportID;
InfoObjects infoObjects = infoStore.Query(query);
InfoObject infoObject = infoObjects[1];
Webi wreport = (Webi)infoObject;
ObjectRelativeIDs personalIDs = wreport.PersonalCategories;
/personalIDs.Add(Convert.ToInt32(categoryID));
infoStore.Commit(infoObjects);
But the report is presents in the Folder also and in user's personal category also.
I dont want the report to be in the folder (Report Sample) if i saved it in user's personal category.
How can i do that?
any idea.
Please help me.
Thanks in advance
Amol Mali
Edited by: amol mali on Jan 9, 2009 7:55 PM -
How to get report in excel format instead of pdf from oracle forms.
Hi,
How to get report in excel format instead of pdf from oracle forms.
Form & Report developer 10g
report format .rdfcreate a report using report builder.
call the report from form using the following procedure
DECLARE
RO_Report_ID REPORT_OBJECT;
Str_Report_Server_Job VARCHAR2(100);
Str_Job_ID VARCHAR2(100);
Str_URL VARCHAR2(100);
PL_ID PARAMLIST ;
BEGIN
PL_ID := GET_PARAMETER_LIST('TEMPDATA');
IF NOT ID_NULL(PL_ID) THEN
DESTROY_PARAMETER_LIST(PL_ID);
END IF;
PL_ID := CREATE_PARAMETER_LIST('TEMPDATA');
RO_Report_ID := FIND_REPORT_OBJECT('RP2RRO');
Add_Parameter(pl_id,'P_SUPCODE',TEXT_PARAMETER,:CONTROL.S_CODE);
Add_Parameter(pl_id,'P_INVOICE_NO',TEXT_PARAMETER,:CONTROL.IN_NO);
Add_Parameter(pl_id, 'PARAMFORM', TEXT_PARAMETER, 'NO');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_FILENAME, 'INVOICE_REG_DETAILS.rep');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_COMM_MODE, SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_EXECUTION_MODE, BATCH);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESTYPE, FILE);
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_DESFORMAT, 'SPREADSHEET');
SET_REPORT_OBJECT_PROPERTY(RO_Report_ID, REPORT_SERVER, 'rep_dbserver_frhome1');
Str_Report_Server_Job := RUN_REPORT_OBJECT(RO_Report_ID, PL_ID);
Str_Job_ID := SUBSTR(Str_Report_Server_Job, LENGTH('rep_dbserver_frhome1') + 2, LENGTH(Str_Report_Server_Job));
Str_URL := '/reports/rwservlet/getjobid' || Str_Job_ID || '?server=rep_dbserver_frhome1';
WEB.SHOW_DOCUMENT(Str_URL, '_SELF');
DESTROY_PARAMETER_LIST(PL_ID);
END; -
How can I delete the repeated bookmarks icons in the bookmarks toolbar?
<blockquote>Locking duplicate thread.<br>
Please continue here: [[/questions/879742]]</blockquote>
My Firefox 6.02 bookmarks toolbar shows the same two bookmarks repeatedly (3 times and two times) so there is no space for the favourite bookmarks I had originally. How can I delete the repeated bookmarks icons in the toolbar? I tried to drag them to trash, but without success. I could not do it from view/ toolbars/customize either.This is a duplicate, please see my suggested answer <br/>[/questions/879742#answer-251913] <-- clickable link --
-
How do I report a user or violation of the Agreement?
User hakinianzfromhakinianz is posting multiple spam threads and I want to know how I can report this user/their posts.
Do I have to be a certain level to have this privelege?
Here is the profile: https://discussions.apple.com/people/hakinianzfromhakinianz?view=overviewd6d24r94 wrote:
User hakinianzfromhakinianz is posting multiple spam threads and I want to know how I can report this user/their posts.
Do I have to be a certain level to have this privelege?
Here is the profile: https://discussions.apple.com/people/hakinianzfromhakinianz?view=overview
Is reported to host.
You may also report by yourself. Right hand up "report abuse" near "email notification" -
I am a new one in oracle and want to know how to hide report engin at runtime....
Can anybody help me.....
Thank you
FarhanThe following coding will help you to hide oracle report engin,
ADD_PARAMETER(idparam,'ORACLE_SHUTDOWN',TEXT_PARAMETER,'YES'); -
Dear sir
On my XP I TRY TO RUN REPORT WITH REPORT SERVER I GET ERROR
ERR:41213 , CAN YOU HELP ME , HOW TO INSTALL REPORT SERVER IN ORACLE 9I REPORT WITH XPHello,
Test to start the Reports server from a "DOS Window" :
rwserver server=repserver
(replace repserver by the reports server name you want top use)
Regards -
How to uninstall Report server
Hi 2 all DBA
plz inform me how to uninstall report server components from application server 10g , or inform me which components is required for report server in application server 10g
ThanksHello,
Test to start the Reports server from a "DOS Window" :
rwserver server=repserver
(replace repserver by the reports server name you want top use)
Regards -
How do I report a fault if my phone is not working...
How do I report a fault if my land line phone is not working? The BT website seems to assume that at the very least the broadband line is working but this is often not the case. Please could you make it crystal clear what phone number to call to report a fault? (e.g. if calling from a friend's phone or a mobile).
Cal 0800 800 151 from another phone, or From a mobile: 0330 123 4151
But first do these tests here http://bt.custhelp.com/app/answers/detail/a_id/9812/c/345,353
You can report the fault online at https://www.bt.com/consumerFaultTracking/public/faults/tracking.do?pageId=2&s_cid=con_FURL_faults
There are some useful help pages here, for BT Broadband customers only, on my personal website.
BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones. -
HT1391 how do you report an ipod touch stolen with serial number.
I have the serial number of my ipod touch. How do I report it stolen to apple?
You don't. Report it to the police, and your insurer if it would be covered.
tt2
Maybe you are looking for
-
How can I correct a photo that was printed in reverse
I have a very old photo that was printed from either a glass plate or very early negative. Either way it was printed with the negative upside down so the photo is reversed. How can I correct that?
-
Transferring from iPod Classic to Second Hard Drive
My external hard drive crashed last week and I have songs on my iPod Classic. Can I transfer these songs to another hard drive easily? I'm afraid if I plug it in all my files will be wiped out.
-
Is there an easy and lazy way to create an array of [1, 2, ... , 4956] ? Solved! Go to Solution.
-
How much iphone 4s wifi chip cost?Still my 4s wifi is not working even though I already updated it to ios7. Thank You!!!..
-
Synchronous sender JDBC to RFC
Hi alll in case of sender JDBC Adapter, i would like to put a result value of processing of target system at sender side. but i have no idea with sender JDBC, anyone has idea? if i am not going to use BPM