How do I report no service?

There is no Verizon Wireless Service in Muncy PA. It has been out since yesterday. I can't find any way to report this, since all reporting requires a phone. What is the email address I can send this to?

For those of you in the Muncy, Pennsylvania area - the tech supports most recent report (just a few minutes ago) stated that it should be restored some time tomorrow. This is their estimate. It goes beyond Muncy, but I am not aware of other areas. Bloomsburg and Scranton have service. Also, call Verizon Wireless as soon as service is restored. They will provide us with a credit for the day (or possibly more if service is not restored by tomorrow) - for each phone. I notified them early this morning; however, they insisted it was my phone. I am quite unhappy with how the situation was initially handled and not satisfied with the current update. Even PPL can provide us with an estimated restore time during a bad storm. There is no email address to contact them with, and the CHAT button has been unavailable nearly all day. Only once this evening could I access it - but they were no help either. Good Luck MUNCY residents!

Similar Messages

How to generate report for Service sheet - ECC 6.0

Hi
Can anyone let me know regarding how to generate reports for service sheets entered
regards
Sanjay

Hi,
Get Service Entry Sheet with following T.codes:
1.MSRV6
2.ML84
Regards,
Biju K

How do i report a service outage

I need to report a service outage any suggestions

Contact Customer Service:
Customer Service
Dial *611 from a cell phone
(800) 922-0204
Monday - Sunday 6 am - 11 pm
- at the phone tree, press 4 for Other and then say Agent

How do I report poor service?

The 4G service along the UP-NW Metra Line from the Cumberland stop in Des Plaines, IL all the way to Ogilvie Transportation Center in Chicago is unacceptably poor. Recently, both data and voice service have been failing between the Jefferson Park and Clybourn stops. I would like to know how to report this issue as I use the line Monday - Friday and I attempt to do all of my online business while on the train so I can focus on other items when I return home.

I think my initial concern about weak signal has been coupled with poor service as described here.
The network congestion likely does not affect the weakness in 4G signal as decreases and drop out are predictable as it happens in the same stretches of my commute. Also, I travel in my car at higher rates of speed than in the train and I do not suffer from the same oscillation of signal strength between full and complete drop out. I have spoke with a couple other commuters and they have expressed the same issues with poor signal.
The frustration is mounting as I pay a premium for "America's Most Reliable 4G Network." If my service get interrupted when I do not pay, it is only fair that I should be able to interrupt payment when my service gets regularly interrupted.
My contract is up in December. I have been a Verizon customer for over 9 years, and I might consider looking for a different carrier that will be able to provide a more reliable signal, or possibly the same quality signal at a more reasonable price.

How can I report degraded service in a location?

I want to report a relatively busy part of town where service is degraded to the point that phones and hotspots won't connect reliably to the internet on Verizon service. I can't find a way to do this through the website or even a link to call. Suggestions?
The location is 13025 Birmingham Hwy, Milton, GA. It's the local high school and service is just awful, even at the highest, unobstructed point on the campus. Thanks for any advice on how to navigate the VZW labyrinth.

1-800-922-0204 or *611 from your device. Speak to a tech and report the tower.
Good Luck

How to Check Report Server Service

Hi Friends,
I have installed Report 6i on NT - Report server and Report Developer on my PC and am running Forms on web successfully , but when I call a report from the web form (thru Run_Product) I am facing problem to see the report output in the browser (report made recently in Report 6i). The report runs well as a standalone in the previewer.
Can anybody tell me how to check whether the Report Server process running or not I mean whats its name and also whether the Report Server is installed as a service or not how to check ?
Thanks in advance.
null

Hi SQL_By_Chance,
Based on my experience, you can use ReportingService2010.FindItems Method or ReportingService2010.ListChildren Method to return items from a report server database or SharePoint library that match the search criteria or get a list of children of a specified
folder. And then judge whether the item exists. For the details, please refer to the link:
Report Server Namespace Management Methods.
For the second question, you can read the RDL as XML using .NET in local machine. For the more information, please see the thread:
http://social.msdn.microsoft.com/Forums/en-US/f64b3071-ffb5-40b6-8529-49b5d9fe159a/what-apis-are-available-for-reading-rdl-files.
When you read the data source item, you can set the data sources for an item in a report server database or SharePoint library using ReportingService2010.SetItemDataSources Method. Please follow the link:
ReportingService2010.SetItemDataSources Method
Hope this helps.
Regards,
Heidi Duan
Heidi Duan
TechNet Community Support

How do I report poor service in zip code 22845 Virginia?

My iPhone 5 has spotty service at best in the region 22845. My phone generally says 1x or 3g with one bar but overall won't send messages.

You've come to the right place for help, gdhokie. It looks like that zip code is right at the border of Virginia and West Virginia and the terrain in the area may cause some service difficulties. How long have you experienced these issues? Try entering your address into www.vzw.com/maps to check coverage for your area. Our Network Extender http://vz.to/IHRT6h would help for service at your home.
JenniferH_VZW
Follow us on Twitter www.twitter.com/vzwsupport

How to Create Reports Services

Hi all,
 
In Oracle 10 R2 Application Server for Windows 2003, is there a way to create a new Report Server services in the Application Server other than the already existing one? If yes, how?
 
Thanks in advance.
 
Note: I know that rwserver -install server=<..> is obsolete in AS 0g R2.

Hello,
You have to use the script addNewServerTarget :
On UNIX:
ORACLE_HOME/bin/addNewServerTarget.sh reports_server_name
On Windows:
ORACLE_HOME\bin\addNewServerTarget.bat reports_server_name
http://download-uk.oracle.com/docs/cd/B14099_17/bi.1012/b14048/pbr_conf.htm#CHDGHEFE
Regards

From report server database how to know reporting services server

from report server database how to know reporting services server
Thanks

Hi Ajay,
If I understand correctly, you want to know
Reporting Services server name based on report server database. Based on my research, I find that the Reporting Services server name is the computer name which install the report server. So we can try to click Start button, right-clicking Computer,
and then clicking Properties. Under Computer name, domain, and workgroup settings, you can find your computer name.
Besides, the report server database is a SQL Server database that stores the following content:
Items, Subscription and schedule definitions, Report snapshots and report history, System properties and system-level security settings, Report execution log data, Symmetric keys and encrypted connection and credentials for report data sources.
For more information about report
server database, please refer to the following link:
http://technet.microsoft.com/en-us/library/ms156016.aspx
If there are any misunderstanding, please elaborate the issue for further investigation.
Thanks,
Katherine xiong
Katherine Xiong
TechNet Community Support

How to istall oracle forms service and oracle reports service and testing

How to istall oracle forms service and oracle reports service ?
and we can make test?

How to istall oracle forms service and oracle reports service ?http://download.oracle.com/docs/cd/B19375_07/doc/frs/docs.htm
and we can make test?Once installed, there is a test program both for Forms and Reports... or you mean something else ? if so, please clarify.

How to Virtual cube with services works

Hi,
How to Virtual cube with services works.
can anyone provide me a realtime scenerio.
if possible provide some code.
Thanks,
cheta.

For which functinality you are trying to create VC with services.
This is mostly used in SEM BCS.
You have to create cube similar path like normal cube, but select in the properties virtual cube, services.
There is a standard FM which connects the Virtual cube to the required cube in BCS. ( this is done by BCS data basis generation function) and we have to do nothing for FM.
In BCS we use virtual cube only for reporting purpose, since standard BCS cube cannot be used for reporting. hence what we do is create another virtucal cube very smiliar to BCS cube.
Then both the Virtual cube and BCS cube are connected by standard FM.

How can I get a service for new powerbook 15" 1.67 screen?

I would like to know how I can get a service for my brand new PB15" screen.
Today I have read an message on the Korean apple forum that New unit of 15" 1.67 doesn't have any line problem.
So, I really want to know whether it is true or not.
If it is, Can I get an exchange for my new 15" 1.67 in India?
Could you help me Apple?
I bought it in Korea 15,Nov, 2005 and Now I am in Mumbai India.
There is a apple international Mumbai in India.
I have a 1 year world worranty.
If the new unit doesn't have any line problem, It means that mine has a problem.
Now I am falling in love with powerbook 15" 1.67 which is my first Mac in my life except line problem.
How can I get a service for it.
Please Help me.

Yes I have read of other reports from people saying theirs are fine. I am really looking forward to purchashing one but I do not want to take a 2000 dollar chance that I might end up with a bad screen. I am still waiting for apple to make an announcement. I have also begun seing reports on some "news like" websites but not really the major ones.

Reporting abuse on Skype's main email address is no longer valid. How can I report now?

Today, I tried to report my case on [e-mail removed for privacy and security] but an automated reply was sent to me from microsoft saying: "Thanks for contacting Skype.This email message cannot be delivered because the email address is no longer valid.For support please click here" I clicked the link, it redirected me to http;//www.support.skype.com. When I browsed it, I came to this page: https://support.skype.com/en/faq/FA1170/how-do-i-contact-skype-customer-service I clicked the "support request page" and it doesn't work. Instead, I was redirected to this link: http://support2.microsoft.com/common/errors/ServerGeneric.htm saying: The page you were looking for is currently not available. The address may not be correct, or there may be a temporary problem with this site. Please try one of the following options:Check the address for typing errors.Click the Back button and try a different option from the navigation menu.Try this page again later.I am really desperate to report that someone is using my name on Skype and I know who he is because he sent me a message and tried to add me. Now, I am using a new Skype account so he can't bother me anymore. If anyone can help me, please don't hesitate to shoot a comment here.

Hi, sleepyberry, and welcome to the Community, Adding my work-around instructions here, as well, not realizing you had posted a similar question on another thread (topic). Yes, Skype no longer uses generic or central e-mail addresses for its customer service and support; Skype now uses a web-form format instead. Skype is aware of lingering website issues that can occur when people attempt to contact Skype Customer Service. Temporarily enabling scripts, pop-up dialog boxes, and disabling plug-ins which could prohibit pop-ups may help get past website problems. Here is a link to the instruction on how to contact Skype Customer Service via their secure portal: Contact Customer Service
If you still experience difficulty reaching Skype Customer Service or find yourself redirected back to the Community, please try again using a different web browser and choosing a different path through the various drop-down menu options presented.
Also, look to approve a pop-up dialogue box which would connect you to start an instant message chat with a customer service agent. If you have pop-ups blocked in your browser settings, this will also block reaching an agent.
Last and not least, when you reach the last step of the process, remember to click on the "Start Chat" link when you are provided the choice of visiting the Community or starting an instant message chat with a customer service agent.
Regards,
Elaine

Microsoft Reporting Web Service

I am trying to call the new Microsoft Reporting web service from
weblogic 8.1sp2. I've run the clientgen utility against the microsoft
reporting server's wsdl.
Using the generated stup classes, I keep getting an error about a
snapshotID parameter, which is not a parameter passed in the stub API.
I've attached the wsdl, java program and the soap xml with the error in
it.
Any help would be greatly appreciated.
Thanks,
Eddie
[ReportingService.wsdl]
import java.io.*;
import weblogic.webservice.context.*;
import bny.adr.common.webservice.MSQLReportingService.weblogicgen.*;
import bny.adr.common.webservice.MSQLReportingService.weblogicgen.serializer.*;
import bny.adr.common.webservice.MSQLReportingService.weblogicgen.serializer.holders.*;
public class TestClient1
public static void main(String args[])
FileOutputStream out_stream= null;
PrintWriter writer = null;
try
//out_stream =
// new FileOutputStream("C:/mystuff/JavaProjects8.1/java/Test/webservices/MSReportService/StackDump");
//writer = new PrintWriter(out_stream);
ReportingService_Impl rpt_srv_impl =
new ReportingService_Impl();
ReportingServiceSoap rpt_srv =
//rpt_srv_impl.getReportingServiceSoap();
rpt_srv_impl.getReportingServiceSoap("user", "password");
String reportPath = "/Chapter04/Invoice-Batch Number Report";
//String reportPath = "/Chapter04/Customer-Invoice Report";
//The rendering format for the report.
String format = "HTML4.0";
// The devInfo string tells the report viewer how to display with the report.
String devInfo =
"<DeviceInfo>" +
"<Toolbar>False</Toolbar>" +
"<Parameters>False</Parameters>" +
"<DocMap>True</DocMap>" +
"<Zoom>100</Zoom>" +
"</DeviceInfo>";
// Create an array of the values for the report parameters
ParameterValue parameters[] = new ParameterValue[2];
ParameterValue paramValue = new ParameterValue();
paramValue.setName("StartDate");
paramValue.setValue("01/01/2001");
parameters[0] = paramValue;
paramValue = new ParameterValue();
paramValue.setName("EndDate");
paramValue.setValue("01/06/2005");
parameters[1] = paramValue;
ParameterValue paramValue = new ParameterValue();
paramValue.setName("snapshotID");
paramValue.setValue("1/7/2005 10:38:21 AM");
parameters[0] = paramValue;
// Create variables for the remainder of the parameters
String historyID = null;
DataSourceCredentials credentials[] = null;
String showHideToggle = null;
String encoding;
String mimeType;
Warning warnings[] = null;
ParameterValue reportHistoryParameters[] = null;
String streamIDs[] = null;
SessionHeader sh = new SessionHeader();
SessionHeaderHolder shh = new SessionHeaderHolder();
sh.setIsNewExecution(true);
shh.setValue(sh);
ServerInfoHeaderHolder server_info_hd_hldr = new ServerInfoHeaderHolder();
Render param = new Render(reportPath, format, historyID, devInfo, parameters,
credentials, showHideToggle); //, encoding, mimeType,
//reportHistoryParameters, warnings, streamIDs);
//ServerInfoHeader server_info_header = new ServerInfoHeaderHolder(;
RenderResponse response = rpt_srv.Render(param, shh, server_info_hd_hldr);
byte report[] = response.getResult();
System.out.println(report);
catch (Exception e)
e.printStackTrace();
//if (writer != null)
// e.printStackTrace(writer);
--------------------Configuration: MSQLReportService - j2sdk1.4.1_07 WebService - <Default>--------------------
Command : "C:\j2sdk1.4.1_07\bin\java.exe" -Dweblogic.webservice.verbose=true -classpath "C:\mystuff\JavaProjects8.1\java\Test\webservices\MSReportService\MSQLReportService;C:\mystuff\JavaProjects8.1\lib\CR121728_81sp2.jar;C:\mystuff\JavaProjects8.1\lib\CR120224_81sp1.jar;C:\mystuff\JavaProjects8.1\lib\weblogic.jar;C:\mystuff\JavaProjects8.1\lib\webservices.jar;C:\mystuff\JavaProjects8.1\lib\webserviceclient+ssl.jar;C:\mystuff\JavaProjects8.1\java\Test\webservices\MSReportService\weblogicbuild;C:\j2sdk1.4.1_07\jre\lib\rt.jar;C:\j2sdk1.4.1_07\lib\dt.jar;C:\j2sdk1.4.1_07\lib\tools.jar;C:\j2sdk1.4.1_07\jre\lib\ext\dnsns.jar;C:\j2sdk1.4.1_07\jre\lib\ext\ldapsec.jar;C:\j2sdk1.4.1_07\jre\lib\ext\localedata.jar;C:\j2sdk1.4.1_07\jre\lib\ext\sunjce_provider.jar" TestClient1
Directory : C:\mystuff\JavaProjects8.1\java\Test\webservices\MSReportService\MSQLReportService

URL : http://wteadapadr01/ReportServer/ReportService.asmx
Headers :
SOAPAction: ["http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices/Render"]
Content-Type: [text/xml]
<env:Envelope xmlns:env="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:xsd="http://www.w3.org/2001/XMLSchema"><env:Header><n2:SessionHeader xmlns:n2="http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices"><n2:IsNewExecution>true</n2:IsNewExecution></n2:SessionHeader></env:Header><env:Body><n1:Render xmlns:n1="http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices"><n1:Report>/Chapter04/Invoice-Batch Number Report</n1:Report><n1:Format>HTML4.0</n1:Format><n1:HistoryID xsi:nil="true"/><n1:DeviceInfo><DeviceInfo><Toolbar>False</Toolbar><Parameters>False</Parameters><DocMap>True</DocMap><Zoom>100</Zoom></DeviceInfo></n1:DeviceInfo><n1:Parameters xsi:type="n1:ArrayOfParameterValue"><n1:ParameterValue xsi:type="n1:ParameterValue"><n1:Name>StartDate</n1:Name><n1:Value>01/01/2001</n1:Value></n1:ParameterValue><n1:ParameterValue xsi:type="n1:ParameterValue"><n1:Name>EndDate</n1:Name><n1:Value>01/06/2005</n1:Value></n1:ParameterValue></n1:Parameters><n1:Credentials xsi:nil="true"/><n1:ShowHideToggle xsi:nil="true"/></n1:Render></env:Body></env:Envelope>


URL : http://wteadapadr01/ReportServer/ReportService.asmx
Response Code :500
Headers :
Date=Thu, 13 Jan 2005 21:59:37 GMT
Server=Microsoft-IIS/6.0
X-Powered-By=ASP.NET
X-AspNet-Version=1.1.4322
Cache-Control=private
Content-Type=text/xml; charset=utf-8
Content-Length=2882
Envelope :
<?xml version="1.0" encoding="utf-8"?>
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns:xsd="http://www.w3.org/2001/XMLSchema">
<soap:Body>
<soap:Fault>
<faultcode>soap:Client</faultcode>
<faultstring>The parameter value provided for 'snapshotID' does not match the parameter type. --> The parameter value provided for 'snapshotID' does not match the parameter type. --> String was not recognized as a valid DateTime.</faultstring>
<faultactor>http://wteadapadr01/ReportServer/ReportService.asmx</faultactor>
<detail>
<ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsParameterTypeMismatch</ErrorCode>
<HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus>
<Message xmlns="http://www.microsoft.com/sql/reportingservices">The parameter value provided for 'snapshotID' does not match the parameter type.</Message>
<HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings.resources.Strings&EvtID=rsParameterTypeMismatch&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=8.00</HelpLink>
<ProductName xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName>
<ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">8.00.743.00</ProductVersion>
<ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId>
<OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem>
<CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId>
<MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices">
<Source>Microsoft.ReportingServices.Diagnostics</Source>
<Message msrs:ErrorCode="rsParameterTypeMismatch" msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings.resources.Strings&EvtID=rsParameterTypeMismatch&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=8.00" xmlns:msrs="http://www.microsoft.com/sql/reportingservices">The parameter value provided for 'snapshotID' does not match the parameter type.</Message>
<MoreInformation>
<Source>mscorlib</Source>
<Message>String was not recognized as a valid DateTime.</Message>
</MoreInformation>
</MoreInformation>
<Warnings xmlns="http://www.microsoft.com/sql/reportingservices" />
</detail>
</soap:Fault>
</soap:Body>
</soap:Envelope>

java.rmi.RemoteException: SOAP Fault:javax.xml.rpc.soap.SOAPFaultException: The parameter value provided for 'snapshotID' does not match the parameter type. --> The parameter value provided for 'snapshotID' does not match the parameter type. --> String was not recognized as a valid DateTime.
Detail:
<detail>
<ErrorCode xmlns="http://www.microsoft.com/sql/reportingservices">rsParameterTypeMismatch</ErrorCode>
<HttpStatus xmlns="http://www.microsoft.com/sql/reportingservices">400</HttpStatus>
<Message xmlns="http://www.microsoft.com/sql/reportingservices">The parameter value provided for 'snapshotID' does not match the parameter type.</Message>
<HelpLink xmlns="http://www.microsoft.com/sql/reportingservices">http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings.resources.Strings&EvtID=rsParameterTypeMismatch&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=8.00</HelpLink>
<ProductName xmlns="http://www.microsoft.com/sql/reportingservices">Microsoft SQL Server Reporting Services</ProductName>
<ProductVersion xmlns="http://www.microsoft.com/sql/reportingservices">8.00.743.00</ProductVersion>
<ProductLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">127</ProductLocaleId>
<OperatingSystem xmlns="http://www.microsoft.com/sql/reportingservices">OsIndependent</OperatingSystem>
<CountryLocaleId xmlns="http://www.microsoft.com/sql/reportingservices">1033</CountryLocaleId>
<MoreInformation xmlns="http://www.microsoft.com/sql/reportingservices">
<Source>Microsoft.ReportingServices.Diagnostics</Source>
<Message xmlns:msrs="http://www.microsoft.com/sql/reportingservices"
msrs:ErrorCode="rsParameterTypeMismatch"
msrs:HelpLink="http://go.microsoft.com/fwlink/?LinkId=20476&EvtSrc=Microsoft.ReportingServices.Diagnostics.Utilities.ErrorStrings.resources.Strings&EvtID=rsParameterTypeMismatch&ProdName=Microsoft%20SQL%20Server%20Reporting%20Services&ProdVer=8.00">The parameter value provided for 'snapshotID' does not match the parameter type.</Message>
<MoreInformation>
<Source>mscorlib</Source>
<Message>String was not recognized as a valid DateTime.</Message>
</MoreInformation>
</MoreInformation>
<Warnings xmlns="http://www.microsoft.com/sql/reportingservices">
</Warnings>
</detail>; nested exception is:
javax.xml.rpc.soap.SOAPFaultException: The parameter value provided for 'snapshotID' does not match the parameter type. --> The parameter value provided for 'snapshotID' does not match the parameter type. --> String was not recognized as a valid DateTime.
at bny.adr.common.webservice.MSQLReportingService.weblogicgen.ReportingServiceSoap_Stub.Render(ReportingServiceSoap_Stub.java:1266)
at TestClient1.main(TestClient1.java:97)
Caused by: javax.xml.rpc.soap.SOAPFaultException: The parameter value provided for 'snapshotID' does not match the parameter type. --> The parameter value provided for 'snapshotID' does not match the parameter type. --> String was not recognized as a valid DateTime.
at weblogic.webservice.core.ClientDispatcher.receive(ClientDispatcher.java:313)
at weblogic.webservice.core.ClientDispatcher.dispatch(ClientDispatcher.java:144)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:457)
at weblogic.webservice.core.DefaultOperation.invoke(DefaultOperation.java:443)
at weblogic.webservice.core.rpc.StubImpl._invoke(StubImpl.java:290)
at bny.adr.common.webservice.MSQLReportingService.weblogicgen.ReportingServiceSoap_Stub.Render(ReportingServiceSoap_Stub.java:1261)
... 1 more
Process completed.

This is a little late, I know. but I just spent the day
struggling with this very issue. Hopefully this can help someone
else in the future. Here's my solution...
on MX:Operation -- result="fillXML()"
then
private function fillXML(): void {
var x:XML = new
XML(wsProps.GetDatasetData.lastResult.toString());
...do what you need with your xml...
I use an XMLList node of the result as the source property
for an XMLListCollection bound to a datagrid. Let me know if you
need more help to get it working. It works like a charm now that I
figured that out. I don't know if it's a slimy hack, or not, but it
gets the job done.

How to call Reports in oracle forms 10g

Dear All,
How to call Reports in oracle forms 10g.
I am using Oracle Forms 10g Reports 10g and Database 10 and and Operating system Windows XP.
Please give me the Solution.
Thanks and Regards,
Faziludeen

Hi Omkar,
Please check the following code.
DECLARE
repid REPORT_OBJECT;
v_rep VARCHAR2(100);
rep_status VARCHAR2(20);
plid ParamList;
BEGIN
plid := Get_parameter_List('tmp');
IF NOT Id_Null(plid) THEN
Destroy_parameter_List( plid );
END IF;
plid := Create_parameter_List('tmp');
add_parameter(plid,'p_parameter',text_parameter,to_char(:POLICY.POLICY_NO));
Add_parameter(plid, 'PARAMFORM', TEXT_parameter, 'NO');
repid := FIND_REPORT_OBJECT('POL_REP');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_COMM_MODE,SYNCHRONOUS);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESTYPE,cache);
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_DESFORMAT,'PDF');
SET_REPORT_OBJECT_PROPERTY(repid,REPORT_OTHER, 'paramform=no');
v_rep := RUN_REPORT_OBJECT(repid,plid);
rep_status := REPORT_OBJECT_STATUS(v_rep);
WHILE rep_status in ('RUNNING','OPENING_REPORT','ENQUEUED')
LOOP
rep_status := report_object_status(v_rep);
END LOOP;
WEB.SHOW_DOCUMENT('http://'||'LENOVO-428E9E41'||'8889'||'/reports/rwservlet/getjobid'||substr(v_rep,instr(v_rep,'_',-1)+1)||'?
'||'server=prod_report_server&P_parameter='||:POLICY.POLICY_NO||
'&paramform=no');
END;
I am used to Start the Report sever   'Rwserver Server=prod_Report_Server Start'
OracleAS Report Services
Version :-   10.1.2.0.2
Name    :-   prod_report_server
Status :-   Server is Shutting down
Jobs in Queue 0
Active Engines 0
I got the Following Error when I trying to run the Report
FRM-41211: Integration error:SSL failure running another product
Thanks and Regards,
Faziludeen

How do I report no service?

Similar Messages

Maybe you are looking for