How do I report / remove comments?

I've had my comments removed but I don't see how to remove other people's comments that are irrelevant to the question I post.

You can't. Only the Hosts (Moderators) can remove posts, and they do this when a post has breached the Terms of Use - for example by ranting rather than asking a question, trying to discuss or speculate about Apple's future policy, or plain rudeness. When a post is removed for this reason the perpetrator is advised by email.
However your may have had posts removed because they were a response to a post which has been removed, and so would have no function - you wouldn't be notified in that case.
Decisions on what to remove are entirely up to the Hosts, though posters at Level 2 and above can draw the Hosts' attention to anything which seems dubious.
If you have a serious reason for wanting a post removed - personal abuse, for example - then post the details here and someone will probably alert the Hosts to it. However simple irrelevance isn't likely to get a post removed.

Similar Messages

  • How to unlock and remove comments in Adobe Reader X for WIN 7?

    A while ago I left a comment in an adobe file and now I want to change it or remove it. The problem is that I can't do anything to the comment, because it is locked and it seems that I don't have the permission to do that. I run Win 7, 64bit.
    When I select properties on the comment by right clicking on it in the Comment List on the right in the Properies window the Locked checkbox is empty, gray and unselectable. The fact that the Locked checkbox is empty should mean that the comment is not locked but there is an icon next to it that pictures a small lock. I am confused. Is it locked? Is it not? Is there anything I can do to remove or change this comment?
    Next to the Locked checkbox is a Make Properties Default checkbox which is selectable but I believe unrelated to what I want to do. What do I do?

    I do not know what causes this; I do not have any such problem on a very similar system.  But if I did have such a problem, I would
    make sure the latest Adobe Reader version is installed
    make sure all Windows updates are installed
    check if there is a newer printer driver version available
    see if temporarily disable AV would prevent the problem
    Sorry, no other ideas.

  • How to unlock and remove comments in Adobe Reader?

    A while ago I left a comment in an adobe file and now I want to change it or remove it. The problem is that I can't do anything to the comment, because it is locked and it seems that I don't have the permission to do that. I run Win 7, 64bit.
    When I select properties on the comment by right clicking on it in the Comment List on the right in the Properies window the Locked checkbox is empty, gray and unselectable. The fact that the Locked checkbox is empty should mean that the comment is not locked but there is an icon next to it that pictures a small lock. I am confused. Is it locked? Is it not? Is there anything I can do to remove or change this comment?
    Next to the Locked checkbox is a Make Properties Default checkbox which is selectable but I believe unrelated to what I want to do. What do I do?

    Remove or delete?
    To delete, first try holding down the option (alt or ⌥) key while emptying.

  • How do I programmatically remove comments within an expression ?

    I would like to evaluate into a LabVIEW substep a TS expression. This expression may contain comment(s).
    The TestStand Str() function allow to do that with the "%expr" format.
    I tried to do something equivalent with the GetFormattedValue method, but the "%expr" format is not allowed.
    Is there any way to do it without adding a pre-expression in my substep ?
    Jean-Louis SCHRICKE
    ├ CTA - Certified TestStand Architect (2008 & 2010 & 2014)
    ├ CTD - Certified TestStand Developer (2004 & 2007)
    └ CLD - Certified LabVIEW Developer (2003 & 2005)

    There is the following API method that will help you:
    PropertyObject.EvaluateEx ( exprString, evaluationOptions).
    You would use this most likely on the SequenceContext. It will return a new property object with the evaluated value. For example, if exprString is "\"this is a test\" //comment here", it will be evaluated to the string "this is a test". Likewise, if you had a local variable Locals.stringVar which had a value of "abc", you could pass the expression "Locals.stringVar //comment here", and it would evaluate to "abc". It will return it in a property value (which you can call GetValNumber or GetValString, etc...), and you can then take that value and do what you please.
    It sounds like you want something to evaluate to a number, then format it with a format string in LabVIEW. You can evaluate the expression to a PropertyObject that is a number type, get the value of the number, then use the Format String VI in LabVIEW.
    If you are trying to do something else or I didn't answer your question, let me know.
    Allen P.
    NI

  • How can i remove comments from the "tell your frie...

    How can I remove comments from the "tell your friends how you're doing" section?

    Please do a Skype reset.
    Exit Skype : From the system tray >> right click on the skype icon and click "Quit"
    Press WinKey+R
    Type: %appdata% and press Enter.
    Rename the folder "Skype" to "Old_Skype"
    Run Skype.
    You will need your password to re-log on, and re-set any options from default
    Regards,
    Tamim
    Location - Dhaka | Bangladesh - Standard Time Zone: GMT/UTC + 06:00 hour
    If one of my replies has adequately addressed your issue, please click on the “Accept as Solution” button. If you found a post useful then please "Give Kudos" at the bottom of my post, so that this information can benefit others.

  • How to remove comments in packages in oracle

    hi gurus,
    can any body help me to remove commented code in packages in oracle?
    thanks in advance...

    The obvious suggestion would be to edit the package (or package body) in whatever editor you prefer and recompile. I'm assuming you know that, however, since you managed to create the package in the first place. If that's not what you're looking for, can you explain a bit more what you're asking?
    Justin

  • How can I report people that are harassing me on my question?

    I posted a question on how to fix a problem that I had with my iPhone. When a person posted me talked about dealing with an employer to solve the problem. No it don't matter how I read it I asked why did they assume that without asking me if I even had a job that the phone was used for. After that the harassment started as if they were defending their friend and I was cruel to them. I did get an answer to my problem but the harassment keep going on and on and on even one wrote that because of that one question I shouldn't be able to post anymore questions when I would need it.
    How can I report this to someone? Who else have these people harassed? Would these people be addressed that they shouldn't be behaving like this?

    Sorry, but the poster before Bee, and Bee herself did not write anything that could be construed as harassment. If those posts deeply hurt you (as well as the original post that set you off) then I would strongly suggest that the Internet is NOT a place you should spend any time as your feelings are going to constantly get hurt. In fact, I'd suggest avoiding all contact with other people as much as possible if KiltedTim hurt you with his post.
    As has been repeatedly explained, he merely asked because that is another avenue that could cause the Camera app to be removed, and he went on to explain how this happens. There is nothing personal in it, we don't care how you got your phone, where you work, what type of job you have, etc. He did care enough to join in and give another possibility as to why your camera icon was missing. If you do a search of these threads you will find that more than a few people have decided to put their work account on their personal iPhone and the profile installed on their iPhone by personnel at their workplace changes features on the iPhone.
    Again, if this, and the answers here, deeply hurt you, pull the cable from the Internet immediately.

  • How to print report in jsp page?

    excuse me,i am new to jsp
    may i know how to pritn report in jsp page or html?
    tq

    here is a hacked up example.. i ripped out a lot, so it may not compile, but you get the idea... the full version is really long and not much new info.. just all awt/display stuff...
    package rowe;
    import javax.swing.*;
    import java.util.*;
    import java.awt.*;
    import java.awt.image.*;
    import java.awt.event.*;
    import java.sql.*;
    import utility.*;
    import java.awt.print.*;
    public class rowePrint extends JFrame implements ActionListener, Printable{
         String printType = "";
         static JButton j = new JButton("Print");
         FontMetrics fm;
         String jID, promotion, product, jComments;
         public void getInfo(int jid) {
              ResultSet rs;
              try {
                   Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
                   Connection conn = DriverManager.getConnection("jdbc:odbc:rowe");
                   Statement stmt = conn.createStatement();
                   rs = stmt.executeQuery("select j.id as jID, j.comments, p.title as pTitle, p.product, p.packagingCartonCost, p.foldingQuarterCostPerM, p.foldingQuarterCostPerM, j.customizationOption as setupFee, p.perMcost, p.qtyCarton, d.name as dName, d.contact as dContact, d.email as dEmail, d.address as dAddress, d.city as dCity, d.state as dState, d.zip as dZip, d.phone as dPhone, d.fax as dFax, r.name as rName, j.totalQty, j.orderIn, j.estFreight, j.miscCost, j.coverSelection, j.imprintSelection from jobs j, promotions p, dealers d, reps r where j.promotion = p.id and j.dealer = d.id and j.rep = r.id and j.id = " + jid);
                   rs.next();
                   jID = rs.getString("jID");
                   jComments = rs.getString("comments");
                   promotion = rs.getString("pTitle");
                   product = rs.getString("product");
              } catch (Exception e) {
                   System.out.println("getinfo: " + e);
       public void actionPerformed(ActionEvent e) {
            if (e.getSource() instanceof JButton) {  
                   wookie();
         public void wookie() {
              PrinterJob printJob = PrinterJob.getPrinterJob();
              Paper paper = new Paper();
              PageFormat page = new PageFormat();
              paper.setImageableArea(0, 0, 600, 780);            
              page.setPaper(paper);
              printJob.setPrintable(this, page);
              try{
                   //printJob.pageDialog(page);
              //     if (printJob.printDialog()) {
                        printJob.print();
              } catch (Exception e) {
                   System.out.println("wookie1" + e);
         public static void main(String[] args) {
              rowePrint at = new rowePrint("Invoice");
              at.getInfo((new Integer(args[0])).intValue());
              at.drawShapes();
         //     at.wookie();
         public void drawShapes() {
              setBounds(0, 0, 670, 550);
              addWindowListener(new WindowAdapter() {public void windowClosing(WindowEvent e) {System.exit(0);}});
              j.setBounds(10, 10, 10, 10);
              j.addActionListener(this);
              getContentPane().setLayout(null);
              getContentPane().add(l);
              getContentPane().add(j);
              show();
         public rowePrint(String s){
              printType = s;
         public void paint(Graphics g) {
              g.setFont(new Font("Serif", Font.BOLD, 18));
              g.drawString(promotion, 20, 30);
              g.setFont(new Font("SansSerif", Font.PLAIN, 4));
              g.drawString("" + new java.util.Date(), 20, 37);
              g.setFont(new Font("Serif", Font.BOLD, 21));
              g.drawString("Rowe Furniture", 440, 35);
              g.fillRect(440, 40, 145, 25);
              g.setColor(Color.white);
              fm = g.getFontMetrics(new Font("Serif", Font.BOLD, 21));
              g.drawString(printType, 512 - (fm.stringWidth(printType) / 2), 60);
        public int print(Graphics g, PageFormat pf, int pi) throws PrinterException {
            if (pi >= 1) {
                return Printable.NO_SUCH_PAGE;
              paint(g);
            return Printable.PAGE_EXISTS;
    }

  • I brought in a slideshow but photos didn't include comments.  How can I get my comments imported along with the pictures?

    I brought in a slideshow but photos didn't include comments.  How do I get my comments?

    First make sure you've added the comments you want to show in the Add a Description field in iPhoto or in the Title field.  If you put them in the Title field and you envoke the feature in iDVD you won't have to delete the title from each slide to give you just the desciption.  Or batch remove the Titles from all the photos before you add them to the iDVD project. You can allways get them back with the Photos ➙ Batfch Change menu option later on.
    Click on the cog wheel menu button at the bottom and select Show titles and comments checkbox.
    Happy Holidays

  • How to customizing single line comment

    Because of the restriction of our dsl language we cannot use SL_COMMENT terminal directly. We have own rule of "Comment" which is defined as a parser rule.
    // '..' is the identifier of our comment rule just like '//'
    Comment:
    '.' '.' (ID|INT|ANY_OTHER)*
    Now we have a problem:
    How can we insert/remove '..' with standard shortcut "Ctrl+/" ? Could we reimplement this feature anywhere in XText ?
    Has anybody any idea for it?

    Christian Dietrich wrote on Tue, 30 June 2015 12:32org.eclipse.xtext.ui.editor.toggleComments.ISingleLineCommentHelper.getDefaultPrefixes(ISourceViewer, String)
    Thanks for your useful hints. It helps me so much.
    But still a problem could not be solved. We have following grammar:
    // this is not comment
    ..!meta foo bar
    //following 2 line are comments
    ..!foo bar
    ..foo bar
    It means that every line which begins with '..' is a comment except that begins with '..!meta'.
    Now the problem is:
    When I type 'ctrl+/' at line '..!meta foo bar', it removes the prefix '..'. But I want to insert '..' before '..!meta'.
    How can I do it? Should I reimplement ToggleSLCommentAction? If yes, where is this Action called or injected?

  • TS1424 Where and how do I report a faulty download/purchase? A number? An email? Help please

    Where and how do I report a faulty download/purchase? Phone number? Email?

    Welcome to the Apple Community.
    Try deleting the problematic tune (electing to remove original file if/when prompted) and then re-downloading the file from the iTunes store.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option from the Quick Links section in the top right corner of the iTunes homepage in your iTunes application on your computer.
    You can re-download content purchased from the iTunes store (availability varies depending on location) using the purchased option at the bottom of the screen of the iTunes app on your iOS device.
    If the problem re-occurs, select the content which is causing a problem and use the 'Report a problem' button in Your Purchase History using your computer.

  • How to eliminate or remove zeros from 1D array

    How to eliminate or remove zeros from 1D array. Let say I have 1D array having foolowing elements
    "0 0 0 0 0 4 0 0 9 0 0 1 4 0 0 0 0 0 0 0 0 10 9 0 0"
    So after removing or eliminating zeros it will become as follow
    "4 9 1 4 10 9"
    So can any body guide me how can I do that? See attached Image for details.
    Thanks 
    JK

    altenbach a écrit :
    hchiam wrote:
    Here are 2 example .vi's I made based on altenbach's removeZeroes.png in this discussion thread: 
    It seems pretty pointless to post those because no new useful information is given.
    Currently, only the input is defined in the connector pane, making them useless as subVIs.
    unlike my example using integers, an "=0", like any "equal" comparison, is potentially dangerous with DBLs.
    Reshaping a 2D array to 1D before removing zeroes is pretty pointless because a 2D output cannot be recovered. A more interesting scenario would be to remove some columns or rows (e.g. that are all zeroes) from a 2D array.
    You should also clean up the front panel, e.g. properly zero the upper left corner, make the controls/indicators nicely labeled, sized and arranged, and maybe even add scrollbars to the arrays.
    Thank you for those comments.
    Now the input and output are defined (in the updated attachments) for use as example subVI's.  I also cleaned up a few visual details, but I leave the rest for others to cater to their specific uses if they don't want to use this as a subVI (or at least as-is), such as changing the icons or changing to integers instead of doubles.
    I'm not sure about what you mean exactly with "=0" being "potentially dangerous with DBLs".  I'm guessing you had a certain case scenario in mind.  Although the subVI's seem to work fine within my larger program and situation, my situation may not generalize with regards to this point.
    I reshaped from 2D to 1D, with a 1D output, because it could be helpful for things like when later processing just needs a 1D array.  For example, in my situation I had to remove a huge spike of unnecessary "0"'s from a previous subVI that were affecting the output display of a certain histogram.  So it turned out a 1D array output was helpful, and you never know what problems come up, so I included the 2nd example.
    Hopefully if someone is looking for this, they can just use or play with an example subVI (granted that they know how to plug things in for their context).  I was hoping to post a subVI people could put to direct use.

  • TS1702 How do I report a scam app in AppStore?

    How do I report a bad app on AppStore? Finger print scanner by silver carring inc... Downloaded a radio app instead of finger print scanning app...the website of developer doesn't exist...
    I want to report this to AppStore so they can remove the app and also give me a refund for $2.
    I believe AppStore as a storefront is not doing their work properly... Aren't they supposed to check if the app u r buying is same one which is downloading?

    Try the 'report a problem' link from your purchase history : log into your account on your computer's iTunes via Store > View My Account (Store > View My Apple ID on iTunes 11) and you should then see a Purchase History section with a 'see all' link to the right of it ; click on that and you should see a list of your purchases ; find that app and use the 'Report a Problem' link and fill in details about the problem (iTunes support should reply within, I think, about 24 hours).
    Some people have had a problem with the 'report a problem' link (it's been taking people to this site on a browser instead of showing a form in iTunes) - if it does that to you then try contacting iTunes support via this page : http://www.apple.com/support/itunes/contact/- click on Contact iTunes Store Support on the right-hand side of the page.

  • How 2 creat report for displaying the details of a Delivery Document using

    how to create report for displaying the details of a Delivery Document using the tables LIKP, LIPS
    thank you
    regards,
    jagrut bharatkumar shukla
    points will be rewarded

    HI
    I AM GIVING YOU MY DELIVERY DOCUMENT CODE...MODIFY IT ACCORDING TO YOUR REQUIREMENT
    *& Report  ZDELIVERY                                *
    report  zdelivery  message-id z9bhu          .
    types: begin of t_likp,
               vbeln type likp-vbeln,      "Delivery
               erdat type likp-erdat,      "Date for rec creation
    *           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
    *           WAERK TYPE LIKP-WAERK,      "Currency
               kunnr type likp-kunnr,      "Ship-To Party
               kunag type likp-kunag,      "Sold-to party
               traty type likp-traty,      "Means-of-Transport
           end of t_likp.
    types: begin of t_lips,
               vbeln type lips-vbeln,      "Delivery
               posnr type lips-posnr,      "Delivery item
               matnr type lips-matnr,      "Material Number
               arktx type lips-arktx,      "Short Text for Sales Order Item
               lfimg type lips-lfimg,      "Actual quantity delivered
               netpr type lips-netpr,
    *           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
               vgbel type lips-vgbel,      "Doc no of the reference document
            end of t_lips.
    types: begin of t_vbpa,
               vbeln type vbpa-vbeln,      "SD DocumenT Number
               posnr type vbpa-posnr,      "Item number
               parvw type vbpa-parvw,      "Partner function
               kunnrb type vbpa-kunnr,      "Customer Number 1
           end of t_vbpa.
    types: begin of t_kna1,
               kunnr type kna1-kunnr,      "Customer Number 1
               name1 type kna1-name1,      "Name 1
               ort01 type kna1-ort01,      "City
               adrnr type kna1-adrnr,      "Address
           end of t_kna1.
    types: begin of t_li_vbpa,
               vbeln type likp-vbeln,      "Delivery
               erdat type likp-erdat,      "Date for rec creation
    *           LFDAT TYPE LIKP-LFDAT,      "Delevery Date
    *           WAERK TYPE LIKP-WAERK,      "Currency
               kunnr type likp-kunnr,      "Ship-To Party
               kunag type likp-kunag,      "Sold-to party
               traty type likp-traty,      "Means-of-Transport
               vbeln1 type lips-vbeln,      "Delivery
               posnr type lips-posnr,      "Delivery item
               matnr type lips-matnr,      "Material Number
               arktx type lips-arktx,      "Short Text for Sales Order Item
               lfimg type lips-lfimg,      "Actual quantity delivered
               netpr type lips-netpr,      "Net Price
    *           MEINS TYPE LIPS-MEINS,      "Base Unit of Measure
               vgbel type lips-vgbel,      "Doc no of the reference document
               vbeln3 type vbpa-vbeln,     "SD DocumenT Number
               parvw type vbpa-parvw,      "Partner function
               kunnrb type vbpa-kunnr,      "Customer Number 1
           end of t_li_vbpa.
    types: begin of t_final,
               vbeln type likp-vbeln,      "Delivery
               erdat type likp-erdat,      "Date for rec creation
               kunnr type likp-kunnr,      "Ship-To Party
               kunag type likp-kunag,      "Sold-to party
               traty type likp-traty,      "Means-of-Transport
               vbeln1 type lips-vbeln,      "Delivery
               posnr type lips-posnr,      "Delivery item
               matnr type lips-matnr,      "Material Number
               arktx type lips-arktx,      "Short Text for Sales Order Item
               lfimg type lips-lfimg,      "Actual quantity delivered
               netpr type lips-netpr,      "Net Price
               vgbel type lips-vgbel,      "Doc no of the reference document
               vbeln3 type vbpa-vbeln,     "SD DocumenT Number
               parvw type vbpa-parvw,      "Partner function
               kunnrb type vbpa-kunnr,     "Customer Number 1
               name1 type kna1-name1,      "Name 1
               ort01 type kna1-ort01,      "City
               adrnr1 type kna1-adrnr,     "Address
               name2 type kna1-name1,      "Name 1
               ort02 type kna1-ort01,      "City
               adrnr2 type kna1-adrnr,     "Address
               name3 type kna1-name1,      "Name 1
               ort03 type kna1-ort01,      "City
               adrnr3 type kna1-adrnr,     "Address
           end of t_final.
    *            D A T A  D E C L A R A T I O N
    *&*********Internal Table Declaration****************&*
    data: it_likp type standard table of t_likp.
    data: it_lips type standard table of t_lips.
    data: it_vbpa type standard table of t_vbpa.
    data: it_kna1 type standard table of t_kna1.
    data: it_li_vbpa type standard table of t_li_vbpa.
    data: it_li_vbpa_temp type standard table of t_li_vbpa.
    data: it_final type standard table of t_final.
    *&*********Work Area Declaration********************&*
    data: wa_likp type t_likp.
    data: wa_lips type t_lips.
    data: wa_vbpa type t_vbpa.
    data: wa_kna1 type t_kna1.
    data: wa_li_vbpa type t_li_vbpa.
    data: wa_li_vbpa_temp type t_li_vbpa.
    data: wa_final type t_final.
    *&*********Data Declaration************************&*
    data: d_vbeln type likp-vbeln.
    data: flag type i value 0.
    *           S E L E C T I O N  S C R E E N   D E C L A R A T I O N
    selection-screen begin of block block2 with frame title text-001.
    select-options: s_vbeln for d_vbeln obligatory.    "Delivery no
    selection-screen end of block block2.
    *            A T  S E L E C T I O N - S C R E E N   E V E N T S
    *AT SELECTION-SCREEN.
    *PERFORM VALIDATE_DATA.
    *            S T A R T   O F  S E L E C T I O N     E V E N T S
    start-of-selection.
    perform fetch_data.
    perform merge_data_kna1.
    *INCLUDE Z9BT_SH_***4_FORMS.
    call function 'OPEN_FORM'
    exporting
    *   APPLICATION                       = 'TX'
    *   ARCHIVE_INDEX                     =
    *   ARCHIVE_PARAMS                    =
        device                            = 'PRINTER'
    *   DIALOG                            = 'X'
    *   FORM                              = ' '
       language                          = sy-langu
    *   OPTIONS                           =
    *   MAIL_SENDER                       =
    *   MAIL_RECIPIENT                    =
    *   MAIL_APPL_OBJECT                  =
    *   RAW_DATA_INTERFACE                = '*'
    *   SPONUMIV                          =
    * IMPORTING
    *   LANGUAGE                          =
    *   NEW_ARCHIVE_PARAMS                =
    *   RESULT                            =
    exceptions
       canceled                          = 1
       device                            = 2
       form                              = 3
       options                           = 4
       unclosed                          = 5
       mail_options                      = 6
       archive_error                     = 7
       invalid_fax_number                = 8
       more_params_needed_in_batch       = 9
       spool_error                       = 10
       codepage                          = 11
       others                            = 12
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    sort it_final by vbeln.
    loop at it_final into wa_final.
    call function 'START_FORM'
    exporting
    *   ARCHIVE_INDEX          =
       form                   = 'Z9BT_DELIVERY'
       language               = sy-langu
    *   STARTPAGE              = ' '
    *   PROGRAM                = ' '
    *   MAIL_APPL_OBJECT       =
    * IMPORTING
    *   LANGUAGE               =
    exceptions
       form                   = 1
       format                 = 2
       unended                = 3
       unopened               = 4
       unused                 = 5
       spool_error            = 6
       codepage               = 7
       others                 = 8
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    call function 'WRITE_FORM'
    exporting
       element                        = 'ITEM_LIST'
       function                       = 'SET'
       type                           = 'BODY'
       window                         = 'MAIN'
    * IMPORTING
    *   PENDING_LINES                  =
    * EXCEPTIONS
    *   ELEMENT                        = 1
    *   FUNCTION                       = 2
    *   TYPE                           = 3
    *   UNOPENED                       = 4
    *   UNSTARTED                      = 5
    *   WINDOW                         = 6
    *   BAD_PAGEFORMAT_FOR_PRINT       = 7
    *   SPOOL_ERROR                    = 8
    *   CODEPAGE                       = 9
    *   OTHERS                         = 10
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    call function 'END_FORM'
    * IMPORTING
    *   RESULT                         =
    exceptions
       unopened                       = 1
       bad_pageformat_for_print       = 2
       spool_error                    = 3
       codepage                       = 4
       others                         = 5
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    endloop.
    call function 'CLOSE_FORM'
    * IMPORTING
    *   RESULT                         =
    *   RDI_RESULT                     =
    * TABLES
    *   OTFDATA                        =
    exceptions
       unopened                       = 1
       bad_pageformat_for_print       = 2
       send_error                     = 3
       spool_error                    = 4
       codepage                       = 5
       others                         = 6
    if sy-subrc <> 0.
    * MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
    *         WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
    endif.
    *&      Form  VALIDATE_DATA
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form validate_data .
    select single vbeln into wa_likp-vbeln
                        from likp where vbeln in s_vbeln.
    append wa_likp to it_likp.
    if sy-subrc <> 0.
    flag = 1.
    endif.
    endform.                    " VALIDATE_DATA
    *&      Form  FETCH_DATA
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form fetch_data .
    select a~vbeln
           a~erdat
           a~kunnr
           a~kunag
           a~traty
           b~vbeln
           b~posnr
           b~matnr
           b~arktx
           b~lfimg
           b~netpr
           b~vgbel
           c~vbeln
           c~parvw
           c~kunnr
             into table it_li_vbpa
                    from likp as a
                    left outer join lips as b on a~vbeln = b~vbeln
                    inner join vbpa as c on b~vgbel = c~vbeln
                    where a~vbeln in s_vbeln and
                    c~parvw = 'RE'.
    endform.                    " FETCH_DATA
    *&      Form  MERGE_DATA_KNA1
    *       text
    *  -->  p1        text
    *  <--  p2        text
    form merge_data_kna1 .
    if it_li_vbpa[] is not initial.
    it_li_vbpa_temp[] = it_li_vbpa[].
    sort it_li_vbpa_temp by kunnr.
    delete adjacent duplicates from it_li_vbpa_temp comparing kunnr.
    loop at it_li_vbpa into wa_li_vbpa.
    read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
    wa_li_vbpa-kunag.
    if sy-subrc <> 0.
    wa_li_vbpa_temp = wa_li_vbpa.
    append wa_li_vbpa_temp to it_li_vbpa_temp.
    endif.
    read table it_li_vbpa_temp into wa_li_vbpa_temp with key kunnr =
    wa_li_vbpa-kunnrb.
    if sy-subrc <> 0.
    wa_li_vbpa_temp = wa_li_vbpa.
    append wa_li_vbpa_temp to it_li_vbpa_temp.
    endif.
    endloop.
    endif.
    if it_li_vbpa_temp[] is not initial.
    select  kunnr
            name1
            ort01
            adrnr into table it_kna1 from kna1
                        for all entries in it_li_vbpa_temp
                        where kunnr = it_li_vbpa_temp-kunnr.
    endif.
    loop at it_li_vbpa into wa_li_vbpa .
    wa_final-vbeln = wa_li_vbpa-vbeln.
    wa_final-erdat = wa_li_vbpa-erdat.
    *it_final-LFART = it_li_vbpa-LFART.
    wa_final-kunnr = wa_li_vbpa-kunnr.
    wa_final-kunag = wa_li_vbpa-kunag.
    *it_final-VSTEL = it_li_vbpa-VSTEL.
    wa_final-traty = wa_li_vbpa-traty.
    wa_final-vbeln1 = wa_li_vbpa-vbeln.
    wa_final-posnr = wa_li_vbpa-posnr.
    wa_final-matnr = wa_li_vbpa-matnr.
    wa_final-arktx = wa_li_vbpa-arktx.
    wa_final-lfimg = wa_li_vbpa-lfimg.
    wa_final-netpr = wa_li_vbpa-netpr.
    *wa_final-GEWEI = it_li_vbpa-GEWEI.
    *it_final-VOLUM = it_li_vbpa-VOLUM.
    *it_final-VOLEH = it_li_vbpa-VOLEH.
    wa_final-vgbel = wa_li_vbpa-vgbel.
    wa_final-vbeln3 = wa_li_vbpa-vbeln.
    *wa_final-PARVW = wa_li_vbpa-PARVW.
    wa_final-kunnrb = wa_li_vbpa-kunnrb.
    read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnr.
    if sy-subrc = 0.
    wa_final-name1 = wa_kna1-name1.
    wa_final-ort01 = wa_kna1-ort01.
    wa_final-adrnr1 = wa_kna1-adrnr.
    endif.
    read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunag.
    if sy-subrc = 0.
    wa_final-name2 = wa_kna1-name1.
    wa_final-ort02 = wa_kna1-ort01.
    wa_final-adrnr2 = wa_kna1-adrnr.
    endif.
    read table it_kna1 into wa_kna1 with key kunnr = wa_li_vbpa-kunnrb.
    if sy-subrc = 0.
    wa_final-name3 = wa_kna1-name1.
    wa_final-ort03 = wa_kna1-ort01.
    wa_final-adrnr3 = wa_kna1-adrnr.
    endif.
    append wa_final to it_final.
    clear wa_final.
    endloop.
    endform.

  • How to save report in PersonalCategory  after creating it using java panel?

    Hi,
    Anybody knows How to save report in PersonalCategory  after creating it using java panel?
    I dont want to save it in public folder. I want to save report (webi) in user's personal category.
    can anybody send me source code?
    It will help me a lot.
    Thanks in advance
    Amol Mali

    Hi teda,
    i'm assuming that you have seen my post that i did successfuly save report in user's personal category.
    Actually the report is created in webi java panel using RE SDK and  is saved in Report Sample Folder then i'm saving it in user's personal category by following code
    string query = "Select SI_PERSONAL_CATEGORIES From CI_INFOOBJECTS Where "
                         + "SI_INSTANCE=0 And SI_ID=" + reportID;
                    InfoObjects infoObjects = infoStore.Query(query);
                    InfoObject infoObject = infoObjects[1];
                    Webi wreport = (Webi)infoObject;
                    ObjectRelativeIDs personalIDs = wreport.PersonalCategories;
                /personalIDs.Add(Convert.ToInt32(categoryID));
                   infoStore.Commit(infoObjects);
    But the report is presents in the Folder also and in user's personal category also.
    I dont want the report to be in the folder (Report Sample) if i saved it in user's personal category.
    How can i do that?
    any idea.
    Please help me.
    Thanks in advance
    Amol Mali
    Edited by: amol mali on Jan 9, 2009 7:55 PM

Maybe you are looking for